SMS messages send to the non-users of iPhone!

Similar Questions

• BlackBerry Smartphones SMS message sending error

  My ISP changed my phone and my sim card, but I rarely can I send sms messages.  The error message is "Short Message Transfer Rejected".  Why won't?

  Via Vodafone eForum, I was told to drop the zero of my phone contacts list.  This solves the problem.  However, the same list of contacts (with leading zeros) worked well for SMS sending on my previous Blackberry 8800.

• My iPhone is set up to autoforward SMS messages to another iPhone.  The first iPhone must be activated so that the SMS messages automatically to the front?

  I have a working iPhone which is implemented through iMessage auto before SMS to my personal iPhone.  If my work phone is not activated SMS messages don't not autoforward.  Must the phone working be enabled so that SMS autoforward work?

  Yes, in any kind of call or the transfer of text, each device in the relay channel must be turned on and connected to the network.

• Gettings error message: error in the non paged area error page

  I have a Satellite M45-S265 with Windows XP. Even if I moved abroad and then went home, I haven't lost my recovery CD!

  However, my computer went to compensation under a policy of service from Best Buy. She returned with a new card, new keyboard, new drive hard (in white), new CD player and I don't know what to another new. I guess the 3rd global environment was pretty hard on this (dust, moisture, heat) so it takes a lot of new things.

  Now, when I use the recovery CD, it seems to do everything OK, until he asks me my settings. After settings, it tells me it will reboot and it does, and when she returns to the top he gets a blue screen with the error 'page in the non paged area failure. "

  Technical information of the blue screen:

  Stop: 0 x 00000050 (0xA9A35A00, 0 x 00000000, 0 x 00000000, 0x805C52BA)

  win29a51.sys address A9A35A00, at A9A35A00, date stamp 00000000

  When I restart, the windows looks like it will start up. Can I get a pretty little box of windows with the message "the system is not fully installed. Please run Setup again. »

  I wonder if the restore CD will not work because there is perhaps now another brand of hard drive on CD here, or different, different determinants?

  Best Buy has something wrong or I have to take the computer to them?

  Original internet research indicates the problem could be faulty RAM?

  What should I do?

  Thank you
  Susan

  Hi Susan,.

  Looks clearly like a related problem of RAM. I recommend to put the machine to a technician and allow it to check the RAM memory, because this fault of page errors occur when something was written into RAM and then if the operating system asks files block in the module memory may not be accessible which causes the above error.

  Greetings

• ios10 problem with non-users of iphone messaging

  After upgrading my iPhone 6 ios10, I had intermittent problems with the messaging of Android users (basically, the conversations no iMessage). In about 60% of the time it is not just to deliver the message no matter what I do (pressing the 'Try Again' don't work do not). He has no problem with the reception of the texts, but I can't answer to Android users (Interestingly, I can message users of Android if they are in a group with iPhone users text). I tried everything was updated to the last verision until reset of ios everything.

  I can't find anything online about this. I'm the only one who what?

  Group Messaging uses the MMS. Normal text messages using SMS. SMS uses the voice channel to transfer messages and is strictly a basic function. If you are experiencing problems sending SMS, contact your carrier.

• A way to send and receive the SMS messages on ThinkPad T440 with Sierra EM7345

  I have a T440 with Sierra LTE. It works fine to connect to mobile networks.

  But here in New Zealand, one of our suppliers also provides free wifi hotspots to customers on certain plans. To use this property, I have to enter a password which is sent to me by SMS.

  Is it possible that I can display SMS messages sent to the SIM card inside my laptop?

  Now, I need to remove the SIM card from my ThinkPad (with all the hassles that implies), paste it into my phone, get the password, then transfer the SIM card in my ThinkPad (and often do not, it is y no food taken located nearby, so I can't restart because I had to disable the internal battery during the installation/uninstallation of the SIM card).

  So, if someone can point to a way I can just see these SMS messages on my ThinkPad, I'm grateful enernally.

  
  

• The screen of the blackBerry Smartphones Messages/SMS messages is not flipping

  I had this problem for the last two days and it does not appear to go far. Please help me. Here's my situation:

  When I turn on my phone horizontally, my menu and contacts flips accordingly, but when I check my text messages SMS/messages/calls missed the round trip, as if I was holding my phone vertically. I don't know what to do about this.

  Thank you.

  Hello and welcome!

  The first general fix for strange behaviors became the battery pop reboot. It will not hurt anything and you lose nothing of what you have saved. With the machine running, remove the back cover and pull the battery. Wait about a minute and reinsert the battery and replace the cover. Power on and wait patiently through the long long long restart the process (can be as long as 10 minutes). See if it normally again. As all computing devices, a normal restart can be a healthy thing... and there's a thread in this forum recommends to restart the storm in this way every 4 days.

  See you soon!

• SMS message not fill

  I use the code shown in this example:

  http://docs.BlackBerry.com/en/developers/deliverables/11935/Create_new_populated_text_msg_565424_11...

  I'm trying to load a SMS message pre-filled in the Messages application, the user can then choose to modify and/or to send.

  The Messages app shows up with a new SMS message open and the populated address, but the message itself is empty.  I see this on simulators and physical devices.

  It is a problem experienced with the later versions of the operating system - there is an open ticket in the developer issues tracking system.

  Please search the Forum.

• Accept the end user license agreement

  When you open a pdf file, I get the message "must accept the end user license agreement".

  Hello

  You must accept the EULA for the software legally.

  Please go through this link.

  Adobe FAQ end-user license agreements

  Concerning

  Sukrit diallo

• How to export Contact using the vCard and SMS to the non-iPhone user

  Hello

  so I just tried to share a contact, using Messages, from another phone (non-iPhone) and I expect Messages to send a vCard using SMS to other mobile phone, but instead the iPhone said: "failed to send Message."  Text messages normal sending very well (with the Green bubbles).

  I followed the 7 steps listed at this link: http://www.iphoneheat.com/2013/01/how-to-send-contact-card-vcard-from-iphone-ipa d-ipod-touch /, but it did not work.

  1. Launch the Contacts application from the home screen of your iPhone, iPad, and iPod Touch.
  2. Search for the contact you want to share and tap the name;
  3. When you contact details, scroll to the bottom and press the button Share contact ;
  4. Choose the option Message ;
  5. The vCard contact will be automatically inserted into an empty message.
  6. Now simply select the recipient you want to send the contact card to the field to the message.
  7. Click on send. That's all!

  If anyone knows how it's supposed to be done with the latest iOS - to send contact information to another phone (non-iphone) by SMS?

  Well, I figured that out, and it relates to this discussion of the Apple forum:

  Why should I mobile data market to send/receive MMS?

  According to my cellular provider (Fido, Canada), the decision to send vCards and picture Messages to cellular data radio was conducted by mobile phone manufacturers (Apple, Samsung, etc.), but it's probably a standard now that cellular providers design their networks (although I could believe the reverse had happened).

  Fortunately, even if I use the connection 'data' Fido that they don't consider it as data, but as the e-mail... which is good for my boyfriend who is also using Fido, because is not a data plan but can now receive vCards (and picture messages) via MMS when it allows its cellular data (radio).

  But the real question is why was decided to send a business card on the data network and not on the SMS network, as it is just text (such as a comma-delimited file).  And if the vCard happened to contain non-text byte then why they wouldn't just UUENCODE (or MIME) the vCard if there no text fields so that it could be sent via SMS?

  Oh, wait... Search..., Wikipedia watch looks like what a card and its ALL TEXT: https://en.wikipedia.org/wiki/VCard#vCard_4.0

  And very little text too.

  If anyone knows why Apple does not send vCards via SMS (or why LG/Samsung either)?

  Why I care, well of curiosity, of course, but also because if we could do more over the cellular transmitter voice/sms, so maybe we could turn cellular data more often, which would save on energy consumption (I guess), reduce the heat our phones get and to reduce our exposure to the EM radiation have some of the disabled (c.f. Bluetooth WiFi wireless transmitters (, data transmitters and cell phones cellular voice/sms).

  Let's hope that someone out there knows.

  Thank you.

  P.S. I also understood why so many of my friends use Whatsapp and WiFi to send text messages instead of using the network of suppliers of cells, the standard e-mail application in Android (and iOS when you message for a non-Apple device) will not send messages (SMS/MMS) via WiFi.

• F & G Committee < ' F & G Committee' > is not a valid e-mail address because it is not the form user@host. You need to correct before sending the e-mail message.

  Out with the new v.31.1.0, the: 2 September 2014 version of Thunderbird, I can email is no longer a list of recipients, getting the error msg: F & G Committee < ' F & G Committee' > is not a valid e-mail address because it is not the form user@host. You need to correct before sending the e-mail message. In earlier versions, the addresses of individual e-mail in the list (F & G Committee in this case) are automatically placed in as the e-mail is sent. Is there a solution to this problem?

  Read this.
  https://support.Mozilla.org/en-us/questions/1019019

• BlackBerry Smartphones cannot SEND the SMS messages on 8130

  Here is my story:

  1. I've upgraded to a Blackberry Pearl 8130 pink in the beginning of the year.   My carrier is Verizon.

  2. recently (a month ago) a friend sent a text message to me of his new phone.  I tried to text back, but received a big big red X indicating that my message isn't getting through.  Specifically, when I opened my message, the error says, "State of the Mobile equipment has failed."

  3. I went to Verizon.  They did something where I think that they took me off the network and then get back on.  There is nothing.  She wanted to make a hard game on the phone, but I had not backed up my data again.

  4. I went home and my data backed up and returned to Verizone about a week later.  I spend more than an hour in the store.  The gentleman who helped me was on the phone with someone (no doubt technical support) nothing works.  He was ready to order me a phone replacement, but after further discussions with technical support, they thought there was a problem with the network, not my phone.  I went home with a case number.

  5. the next day same Verizon called.  They said it wasn't a network problem and it was my phone.  They would send me a replacement.

  6. I received my replacement phone a few days later.  I was anxious to get it set up, but the results were the same.  I have not yet returned to Verizon.  I thought I'd try everything here first see if anyone had any ideas.

  The bottom line:

  I CAN send/receive emails.

  CAN I send an MMS message.

  I CAN receive text Messages.

  I can't send SMS messages.

  Thanks for any advice you may have.

  -Sandra

  Tami,

  Thanks for the reply.  I happy to point out, however, that the problem has been resolved by Verizon!  It has never been my phone, that's why the replacement was a mute point.  Anyway, here is their answer (in case someone else has this problem):

  Sandra, we reviewed your account and coding in any of our servers.  We believe that we have found the problem and fixed it.  We ask that you update your PRL (preferred roaming list) by calling the * 228, option 2.  Once completed please test your ability to send text messages.

  I'm just glad that the problem has been resolved because my frustration was very high.

  Happy texting!

  -Sandra

• I have just recibe enamel of adobelicensing, where they send the order number and a link to download the software I purchased. But, when I try to download, after login, it gives me a message saying im not a user allowed to download. Help, please.

  I have just recibe enamel of adobelicensing, where they send the order number and a link to download the software I purchased. But, when I try to download, after login, it gives me a message saying im not a user allowed to download. Help, please.

  Download the free trial version Adobe Captivate | Adobe Captivate 9

• User Message interface help - table to send to the user through ActiveX interface

  Hello

  I asked a similar question before, but now I'm having problems trying to get a table in the user interface via the mail user interface. I am my code TestStand, I have an expression to send a picture that is as a container of table of FileGlobal to the UI as such:

  RunState.Thread.PostUIMessageEx (UIMsg_UserMessageBase + 2, 0, "", FileGlobals.DataRead, False)

  and in the UImessage callback I what I thought, I have to do to send the data to an array of text on the user interface. It does not work.

  Can someone tell me what I am doing wrong?

  Is attached, the UIcallback, a picture of the table on my user interface and control

  
  

• The message send failed - Please verify your account settings are correct.

  I got Thunderbird established and working for years with multiple accounts. All of a sudden today, I can't send all messages in ANY of my accounts with several Web hosts. The message I get from all of them is:

  The message send failed.
  Check that your Mail & Newsgroups account settings are correct and try again.

  I checked my settings. The look that is configured in the same way they always do. I can send email with these parameters from my phone (K9 Mail on Android program.)

  All my accounts that can receive messages in Thunderbird. I get new messages and I can read them.

  If I try to save a message as a project over IMAP, I get the error:

  Unable to save your message as a draft.
  Check that your Mail & Newsgroups account settings are correct and try again.

  What could possibly change to make Thunderbird exhibit this behavior? I tried without thunderbird downgrade to the previous version and it still had the same behavior. I tried to start in safe mode without the extensions, and he had always the same behavior. Here are my troubleshooting information:

   Application Basics
  

     Name: Thunderbird
     Version: 31.7.0
     User Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0
     Profile Directory: Open Directory
  

               (Local drive)
     Application Build ID: 20150511105107
     Enabled Plugins: about:plugins
     Build Configuration: about:buildconfig
     Memory Use: about:memory
  

   Mail and News Accounts
     account1:
       INCOMING: account1, , (imap) sub4.mail.dreamhost.com:993, SSL, passwordCleartext
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, true
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
  

     account2:
       INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
  

     account3:
       INCOMING: account3, , (imap) secure.emailsrvr.com:993, SSL, passwordCleartext
       OUTGOING: secure.emailsrvr.com:465, SSL, passwordCleartext, true
  

     account4:
       INCOMING: account4, , (imap) secure.emailsrvr.com:993, SSL, passwordCleartext
       OUTGOING: secure.emailsrvr.com:465, SSL, passwordCleartext, true
  

     account5:
       INCOMING: account5, , (imap) imap.googlemail.com:993, SSL, passwordCleartext
       OUTGOING: smtp.googlemail.com:465, SSL, passwordCleartext, true
  

     account6:
       INCOMING: account6, , (imap) imap.googlemail.com:993, SSL, passwordCleartext
       OUTGOING: smtp.googlemail.com:465, SSL, passwordCleartext, true
  

   Crash Reports
  

   Extensions
     Flat Folder Tree, 1.1.2, true, [email protected]
     Google Contacts, 0.7.12, true, {BDD92442-0534-4D6F-A966-BAB7D561D781}
     NoComposeAccount, 1.3.1, true, [email protected]
     Xpunge, 0.6, true, {786abda0-fd14-d247-bf69-38b2fc18491b}
     Enigmail, 1.7.2, false, {847b3a00-7ab1-11d4-8f02-006008948af5}
     Messaging Menu and Unity Launcher integration, 1.3.1, false, [email protected]
  

   Important Modified Preferences
  

     Name: Value
  

       accessibility.typeaheadfind.flashBar: 0
       browser.cache.disk.capacity: 358400
       browser.cache.disk.smart_size_cached_value: 358400
       browser.cache.disk.smart_size.first_run: false
       browser.cache.disk.smart_size.use_old_max: false
       extensions.lastAppVersion: 31.7.0
       mail.openMessageBehavior.version: 1
       mailnews.database.global.datastore.id: cbdcac30-9bd0-4a88-9a66-31a0abff554
       network.cookie.prefsMigrated: true
       places.database.lastMaintenance: 1435582206
       places.history.expiration.transient_current_max_pages: 104858
       plugin.importedState: true
  

   Graphics
  

       Adapter Description: X.Org -- Gallium 0.4 on AMD RV620
       Vendor ID: X.Org
       Device ID: Gallium 0.4 on AMD RV620
       Driver Version: 3.0 Mesa 10.5.2
       WebGL Renderer: false
       GPU Accelerated Windows: 0
  

       AzureCanvasBackend: cairo
       AzureSkiaAccelerated: 0
       AzureFallbackCanvasBackend: none
       AzureContentBackend: cairo
  

   JavaScript
  

   Incremental GC: 1
  

   Accessibility
  

     Activated: 0
     Prevent Accessibility: 0
  

   Library Versions
  

       Expected minimum version
       Version in use
  

       NSPR
       4.10.6
       4.10.6
  

       NSS
       3.16.2.3 Basic ECC
       3.16.2.3 Basic ECC
  

       NSS Util
       3.16.2.3
       3.16.2.3
  

       NSS SSL
       3.16.2.3 Basic ECC
       3.16.2.3 Basic ECC
  

       NSS S/MIME
       3.16.2.3 Basic ECC
       3.16.2.3 Basic ECC
  

  The problem was that my directory/tmp was not mounted. I don't know why it has not been mounted, but restarting the Assembly fixed.

  Thunderbird was IO error trying to create temporary files. The error messages were misleading, making me think it had to do with e-mail accounts.