SNS... automatic or manual registration?

Similar Questions

• Background Intelligent Transfer service went from automatic to manual and off when the Pc is off

  PC is running XP home 2002 SP3. With the service disabled MS Security Essentials does not update or Windows updates are not loaded. PC updates after I pass the service to self and sart service.

  1. When did you first change Background Intelligent Transfer Service startup to automatic to manual?

  1B. why did you change Background Intelligent Transfer Service startup to automatic to manual?

  2. first MSE (initially) installed on October 29, 2012 or...?

  3. you are a referring to MSE 'default' in your last response. How do you "fail" MSE & when do you have this 'failure' first occur?

  4. didn't you uninstall Norton Internet Security AND THEN (b) download/run the Norton removal tool & restart (c) YOU first installed MSE? [1]

  5. do for Windows XP security update (KB2724197) listed in Add/Remove programs?

  6 no Update for Windows XP (KB2731847) security Update for Windows XP (KB2393802) security or Update for Windows XP (KB971029) is listed in Add/Remove Programs, is that correct?

  7 is a brand new computer or used when you have guessed?

  ~~~~~~~~

  IMPORTANT! => Your version of Flash Player is badly outdated & submitted to thousands of security vulnerabilities. Download Flash Player v11.5.502.110 installed & removed previous versions as soon as possible!  Follow the instructions here-online http://aumha.net/viewtopic.php?f=26&t=46346

  ============================================
  [1] see http://experts.windows.com/w/experts_wiki/89.aspx

• Latest version of KB905866 will install not (error 80004005) automatically or manually

  Latest version of KB905866 will install not (error 80004005) automatically or manually.  I tried the regular and most aggressive FixIt for updates.  I also tried to do nothing works safe mode.  I also tried to block the startup applications and tried all th eproceures again no no is made.  At one point my event log indicated that this update is not supported with this computer (not the event log regular I received after most of the trials).  Any other ideas?  I am running Windows Vista Ultimate 32)

  0x80004005= unknown error - can occur due to programs/services to interfere in the background.

  Suggestion-

  • Do a clean boot and try to reinstall the update.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  • Download the update manually and install it in a clean boot state.
   

• What is the difference between automatic and manual creation?

  Hi all

  What is the difference between automatic and manual creation?

  AutoCreate IN. allows you to convert a requisition to PO, but manual PO can be created without reference to a requisition.

• Virgin Media UK has changed his ISP address and I cannot add the new address through automatic or manual, how do I do it?

  Virgin used to use google for it's email service has recently created a new ISP of it own. I'm unable to find using the automatic "Add account" in Thunderbird. I tried to do it manually without joy. I can't get into my email account using webmail blank page. Any suggestions please?
  GMN

  Via the Menu bar
  File > new > existing e-mail account
  or
  Via the mail toolbar
  Icon of the menu > new message > e-mail account

  Enter the name
  Enter the full e-mail address
  Enter the password - same one you use to access webmail

  Select this option to remember password.
  Click on "continue".

  Thunderbird tries to search for configuration settings.
  Check: He selected the right account type: POP or IMAP
  Are the correct settings... see info at the link below.
  the manually set/correct
  Click on the button "Manual Configuration".

  See here the setting on the server:
  http://help.virginmedia.com/system/selfservice.controller?configuration=1001 & PARTITION_ID = 1 & TIMEZONE_OFFSET = & usertype = 1 & VM_CUSTOMER_TYPE = Cable & cmd = VIEW_ARTICLE & article_id = 2743

  According to your email... the portion after the @, this will determine what will be the name of the server for POP/IMAP/SMTP.

  Use the "Re-test" button to verify the changes.
  Click 'Done' to create the email account.

• Are updated faster Windows via downlaod automatic or manual download

  32 bit Vista Home premium with MS update

  As I have my system to check microsoft updates per day and downlaod / install at one point.

  But sometimes I click on check for updates button' and then go ahead and click on install

  If it takes more time to download and install when I do like this vs auto? It seems like he does, but this could be because I'm actually waiting, while the car is happening during the night

  The Windows Update on your PC client checks the Microsoft's Windows Update server for the availability of new updates at irregular intervals and such randomization ensures that the Windows Update server is not overloaded with requests for updates at a time. The customer is very effective in searching for new updates and research updates that have been added since the last time updates have been excavated, which allows him to find the updates quickly and efficiently.

  When checking for updates, the Windows Update client evaluates if the update is appropriate for your computer using guidelines set by the Publisher of the update, for example, Microsoft Office.

  If the computer is not online at the same time that you specified to search for updates, the Windows Update client starts then check every five hours or something like that until he finds the updates successfully.

  If Windows wants to install updates at shutdown, it's because the automatic updates downloaded updates, but not all updates you have requested or for automatic download. It will install the updates it has already downloaded and will inform you in good time when others are downloaded.

  When all updates are listed so you check manually that you control the Windows Update server directly applicable to your system and you can immediately download and install. It is good to do a manual update now and again just to check what other updates are available as optional updates.

  http://www.Microsoft.com/Windows/downloads/windowsupdate/FAQ.mspx

  TaurArian [MVP] 2005-2011 - Update Services

• Vista - Cannot install updates (automatically or manually)

  I got this computer with Vista for 2 1/2 years. It is set to "update automatically", and should NEVER be... And even when I go to "manually" install updates, it won't... What is the problem? Can anyone help?

  Hi Lazyladyinky,

  1. what happens when you try to install the updates manually?

  2 are you getting any error or message code while trying to install updates?

  3. what type of internet connection do you use?

  Reset windows update components before installing the windows updates.
  http://support.Microsoft.com/kb/971058

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Setup KB967044 error; I get the error code 646 in automatic and manual update update fails so

  I tried to install KB967044 for Microsoft Works 9. Like others, I get the error code 646 for the automatic update. I tried to manually install, but installation requires the CD of Microsoft Works. Now, Works has been installed at the factory, and I do not think that the CD that came with the computer. In any case, I was unable to find such a CD. Disable my firewall has not changed the problem. I use Vista.
  Thank you for your help.

  Contact the manufacturer of your PC to get the drives concerned etc..

  If the update requires the CD and then the CD. TaurArian [MVP] 2005-2010 - Update Services

• I have problems of automatic and manual update udates

  My updates install if I manually or automatic udates. How to download

  DJeanB,

  Access the article via Internet Explore (only) & run KB971058 the difficulty he 50202 in DEFAULT and AGGRESSIVE modes.

  A general solution, *IF* is no malware problem, would be to reset the update components:

  (When was the last time you checked your system for malicious programs?)

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058>

  The most effective way to use the Fixit above is to download, * except *, configure the system to boot, and then run Microsoft Fix it 50202.msi and first choose the default mode.

  Turn it back on.

  See if the system can update now. If no joy, run it again with the system connected to the internet, in aggressive mode.

  Turn it back on.

  See if the system can update now.

  Cancel the clean boot procedure, and then see if he can search for updates in Windows normal mode.

  How to configure Windows XP to start in a clean boot http://support.microsoft.com/kb/310353State >

  05/03 / 1103:39: 48 pm

• How to find if an invoice to the AP is approved automatically or manually?

  Hello

  I have a question about invoices in Payables.

  How know if an invoice is approved manually or automatically, is approved?

  Like, for example, a company, all less than $ 50 bills can be approved without the consent of the Manager. These invoices can be automatically approved. But all these bills over $ 50 must be approved by the Manager.

  Do we not have this kind of scenario? If so, how do we identify them in oracle tables. What table and column that specify this source.

  Thank you

  Hello

  You can find it by referring to the WFAPPROVAL_STATUS column in the AP_INVOICES_ALL table.

  If your workflow design is not not approve invoices less than $ 50,
  then the approval status of invoices less than $ 50 would be the value in WFAPPROVAL_STATUS as '' NOT NECESSARY ''.

  If your design workflow is to approve the Bills above $ 50
  then the approval status of the Bills above $ 50 would be the value in WFAPPROVAL_STATUS as 'WFAPPROVED '.

  Apart from the above, there are several other statuses available for invoice approval such as,.

  REQUIRED approval is required for a Bill, but no authorization is launched
  INSIDER = approval is required for a Bill, and approval is launched
  REJECTED = approval is required for a Bill, and the approver rejects the approval
  MANUAL APPROVED approval is required for a Bill, but with approval of Force the invoice has been approved

  Kind regards
  Ivruksha

• Error code 646 - I have 6 updates which will be not installed - automatically or manually, individually or collectively.

  KB982311, KB981233, KB982122, KB982134, KB983503, KB982157 are my problem.  They attempted to automatically update since June 10 and fail every time. I tried to do them individually, and each of them fails.  Where should I go from here?

  Access the following KB via Internet Explorer (32-bit) only, run the difficulty, reboot & then try to reinstall updates: http://support.microsoft.com/kb/886549 [ignore titles, etc..]

  [@Jaycee: OP posted on Office updates, not .NET Framework updates.]

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Security update for Windows XP (KB2686509) fails on several attempts both automatic and manual update.

  The Go.Microsoft.com reference site for this security update does not exist and automatically takes me to a site that is irrelevant.

  I tried checking the utility support Windows successfully and he stretched something but still no change on my attempts to update.

  I attepted to change my boot through the msconfig utility, but it still does not work.

  I cold booted my computer without modification.

  I disabled Norton 360 during the download and update and still no change.

  In automatic update mode, it tries every night and shows me the message that failed in the morning.

  See the RESPONSE messages in this thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115c-419d-ac37-03ff8927b79c

  TIP: Start by Christian batch file (BAT).

• I have XP, & can not update automatically or manually online when I try, I get error: 0 x 80070424.

  automatic updates is enabled, but nothing happens, I have also tried the new FIXIT but may not submit the results, was invited to come here, it seems to have started after that I got "windows security 2012 the virus" which I finally fixed it with 'malaware bytes' can help please? I would be very grateful.
  Thank you very much...

  Hi Tokdok,

  I suggest you try the steps in the Microsoft Knowledge Base article and check.

  Error message 0 x 80070424 when you use Microsoft Update or Windows Update Web sites to install updates, or when you start Windows Firewall

  http://support.Microsoft.com/kb/968002

  Let us know if that helps.

• cannot go into standby mode automatically only manual

  How can I get my computer to go to stanfby automatically

  Hello
  From > start / Control Panel > settings > Control Panel, open Power Options then power management. Select the desired settings for standby and hibernation. OK your way out.

  Hope this helps,
  Don

• Performance issues / can't get windows updates automatically or manually

  I tried to upgrade windows 7 to windows 10 year last to finally be told that my system was not compatible for windows 10. So I rebooted windows 7. I started having performance problems, like plate of frequent crashes, freezes, not able to play some video clips, cannot run any app, etc... I did not notice immediately and never Associates windows 7 reload with these questions. However, I just found out recently that automatic updates have not downloaded an upgrade since July 2015 a year ago, which is at the time that the windows 10 update was attempted. When I try to do an analysis to the upgrade I get the following error code: 80070002. Anyone have any suggestions to fix this problem. Any suggestions would be greatly appreciated.

  Download and install the following:

  https://support.Microsoft.com/en-us/KB/3125574

  then

  https://support.Microsoft.com/en-CA/KB/3102810

  Also:

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  then

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system