Lenovo G500 blocked "Lenovo splash screen.

Similar Questions

• a thin horizontal line between lenovo n500 screen

  Hi guys I need an urgent response of lenovo guys.  When I was watching a movie about a month ago a thin appeared between lenovo n500 screen. I hooked up another monitor, and that was very good. This means that my lcd screen you have the problem. someone told me that an IC is damaged. Lenovo guys please tell me lenovo warranty covers this problem?

  Second, what is the cost of repair?

  warranty should cover this issue. Contact lenovo support line

• Pavilion h8 - 1070t: blocked on the HP splash screen, computer beep

  I just installed a PSU Corsair CX600 and an EVGA GeForce gt 740.

  When I start my PC, is rest on the start screen and beeps once, every ten seconds. After 3 beeps (30 seconds) my PC beeps again followed three quick beeps and the monitor stops receiving signal from the computer (I do not see the HP splash screen, no signal).

  What could be the problem?

  I think that your problem is that the video card is not compatible with your BIOS.  EVGA 700 series cards require UEFI in the motherboard instead of a standard BIOS.  I suggest you to contact EVGA Tech Support (1-888-880-3842) to see if they have a VBIOS update that will allow the card to work with your computer.  If they do not have an update that they can email it to you.  Tell them that someone of the HP Forums suggested that you call.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Each application is blocked on the splash screen?

  Hello world!

  I'm having a little difficulty testing my application on the Simulator. I can deploy apps on the Simulator successfully (which was great to see, inner happiness when it happened!). However every app I have deploy, even the default HelloWorld application, gets stuck on the startup screen when I click to open it. He remains on the splash screen and then finally closes the application.

  Is this a common problem? I searched around, and nobody else seems to have the same problems?

  Any help would be appreciated!

  Patrick

  I solved my problem after some debugging time! It seems that there is something wrong with the version of the SDK that I had installed, I completely uninstalled the version I had and then installed the latest version from the BlackBerry site. Problem solved now and I have my application running on the test device.

  Hooray

• Win XP crashes after the splash screen (charge PointSec)

  I have a laptop lenovo t400, which has Pointsec Encryption (6.1.3), and WinXP loaded thereon.

  I ran the update tool think that Vantage Lenovo that has downloaded and installed a number of updates - I didn't run it for centuries.

  Now when I try to start the computer it crashes after the XP splash screen is displayed. Simply, the screen goes black.

  I tried the options Mode safe (include VGA Mode and start with the last successful configuration) without success. Also, they fail to start.

  The flow rate is:

  Power On, screen authentication PointSec, Win XP Splash screen, and then a black screen

  I got successfully into the system using UBCD4Win with pointsec plugin loaded, load a WinPE environment on a USB and allows me to access the C: drive unencrypted (as I've authenticated with Pointsec).

  I'm really stuck for ideas as to the update is the cause of the problem and I'd love to hear some suggestions on how to remedy this situation.

  --

  Additional information:

  The last lines in ntbtlog.txt is:

  Not load the parallel driver live

  Did not load driver bios SM service

  Did not load driver SM bus service

  Loaded driver \SystemRoot\System32\Drivers\Cdfs.SYS

  Search:

  c:\Windows\$NtServicePackUninstall$

  Looks like that Service Pack 3 has been installed:

  File: spuninst\spuninst, inf shows:

  NtServicePackVersionText = "Service Pack 3".
  NtServicePackPreviousVersionText = "Service Pack 2".

  Fixed!

  The problem has been updates to lenovo (probably guilty being the video driver that I presume).

  Using UBCD4Win with pointsec plugin I was able

  * Access to the decrypted c:

  * Restored manually updates to c:\windows\system32 and c:\windows\system32\drivers

  Original files have been found in places like: c:\windows\system32\reinstallbackups\008\DriverFiles

  * Finally, I had to roll back updates of the register who did the updates. UBCD4Win offers a tool to do this: the registry Restore Wizard. He basically just look in c:\System Volume Information System Restore directory and lists all the Restore Points available (Fortunately the Lenovo updates mark a restore point until they run). You can also do it manually using the following instructions:

  http://hypography.com/forums/tutorials-and-how-tos/17193-XP-recovery-instructions-for-UBCD4Win.html

  This makes the system successfully booted.

  I've most definitely will be staying clear after you press the big blue button in the future. It was a nightmare to fix.

• T400 suddenly won't boot beyond the ThinkPad splash screen

  .. .only visible indicator of a problem is that the drive activity light on the bottom of the screen stops ignition etc when the ThinkPad splash screen appears. No bumps in the system, no unusual activity to suggest physical damage to computer laptop or disk - started very well in the morning on the desk, would not restart from the same location on the office after lunch. System also won't start on a bootable system disk (but you can hear the drive access). System is less than one year.

  I solved my problem: Lenovo Service Center for repair under warranty here a diagnosis nor a bad mother and a bad battery, due to abuse of the handling, etc. the computer could suffer (it seemed to be a factory default). No indication as to whether one or the other 'bad' component caused the other to fail. in total 48 hrs to repair, most of the waiting time for a new motherboard coming in the night. No charge to me for what it is. Life goes on.

• HPE-500cs: Permutation GTX460 for GTX960 = > HP Splash screen freeze

  Hello guys. So today, I'm really really a lot about GTX 960. I rushed in and bought. Before exchanging I did I have deep cleaning of the pilot. (DDU) Then I swapped the cards. (GTX 460 for the 960) Wattage is sufficient. After pressing the button, the HP splash screen appears. 'Press ESC to enter the BIOS. When I try to press something, the PC sounds right. After like 30 seconds, I hear one long beep followed 3 short. The HP bios blocks the card?
  
  I also tried the card in my pc of brothers, no problem, the card is fine. Only clue I have is that the MB has only PCI-E 2.0 and this card is 3.0. This could be the problem?
  
  Ive measures taken:
  
  1.) deep clean with DDU
  Clear 2.) CMOS
  3.) begin without HARD drive is connected (nothing really changed)
  
  IM really deperate. I intend to try different moba, but it's hard to find a good for a such old processor. The H61, I found all them have only 2 RAM slots, but I have 4 sticks of 2 GB. Should I go for Z75 even when I can't overclock? I really want to go back to my 460.
  
  Thank you for your time and sorry for the long post.
  
  EDIT: I have brand new 500W 85 + PSU, which should be more then enough since the GPU is only 120W

  SareMa, welcome to the forum.

  I believe that the problem may be that the video card is not compatible with the motherboard BIOS.  Most of the newer cards require UEFI.  HP didn't start using UEFI until mid-October 2012.  In addition, it could be that the power supply is older and does not provide the necessary power for the card to function properly.  This is 460W and map requires a minimum 400W PSU.  Age of the PSU, they are not as powerful.

  I suggest you contact the manufacturer's Technical Support to see what they have to say.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• GTX 980 and no splash screen

  I have a ti GTX 980 flashed running in a Mac Pro(on external power) 2010. It shows only a splash screen, however, so I attach a No 4 k monitor DVI port. Monitors Dell P2415Q 4 k (except for a random time) show no video until the initialization is complete. This means that I must keep an old DVI monitor on all the time to get not only the splash screen but even to get any video output at all on end of startup. Without a monitor DVI the Dells don't show any video and go mode 'sleep'. Bootcamp Windows 7 displays the same behavior. Any ideas?

  How the P2415Q is normally connected? If you try HDMI then try rather Displayport.

  If your card was flashed did buy you it from MacVidCards? If so, ask them for assistance.

• A double issue of splash screen

  A new Macbook Air configuration, after an attempt abandoned to transfer data from the old to the new mac, I have now two start "screens". It happened because I was prompted to choose a different user account name (probably because there's already the original registered name) so now I start screen one, with a version of my name of account to computer, then followed by a second splash screen, with the slightly modified name. Trying to remove this duplicate, I removed the original in users and accounts and it appears is no longer there, but the splash screen persists, making it necessary for me to register twice to get online. Because I set up all my Web sites, mail etc, I don't want to repeat it. Somehow remove this first splash screen?

  A new Mac comes with 90 days of free technical support, AppleCare.

  Please call AppleCare.

  AppleCare: 1-800-275-2273

• First HP: The first HP splash screen disabling

  I love my first HP but I'm a little tired of seeing the logo of "HP" pop a few seconds every time I turn on my computer.   Is it possible to disable?   (or by shortening the time)
  
  It was ok when I used it just here and there, but now that I use it for hours, it becomes a bit annoying to have to wait few seconds every time that happens.

  Good and bad news.  The bad news is: no, there is no setting that disables the start screen.  The good news is: you don't need to wait for it to go away.  The keyboard buffer becomes active as soon as the ignition, so run some keys you press on during the splash screen when the startup screen goes.  Simply turn on your first and start using it right away, even when the start screen shows.  Nice, huh?

  Hope that helps!  DISCLAIMER: I do not work for HP.

• Light client T520: t520 - how to disable the 'hp' splash screen at boot...

  Hello

  We just bought some HP t520s to complete a lab that we t510s.  The t510s work very well.  The t520s are almost here.  I just need to hide a pesky startup screen.  When the t520 marketing and gets to the GUI, but before that the network is connected, it displays a splash screen telling me that his "waitting for the network.  Unfortunately, this splash screen also has a button called "network settings."  This button, this bad boy is what I want to disable delete or hide.  I don't care if the start screen appears or not, but in giving users access to network settings and host name and all sorts of settings is a waitting accident to happen.

  Does anyone have any ideas as to how I can get rid of this button?  I would really appreciate hints, ideas, comments or words of wisdom on this topic.

  Thanks to you all!

  René

  Try the following: in xterm type regeditor, go to config-Assistant, enablenetworkcheck the value 0, enableupdatecheck the value 0, the network/update dialog box will not be displayed. You must type the value in the value dialog box and click on save before you go to the following registry key. If this does not work as expected please open a case with www.hp.com/go/support

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• Satellite L640 hangs at the splash screen

  Hi all

  I have a L640 / 01 H that I bought earlier this year. In addition to the original Windows 7 OS, I installed a Linux system on a separate partition.

  Earlier today, I was using Linux (which is what I normally use) and everything was really slow.
  Finally I force-shut-down, power button.

  Now, I noticed a problem with the BIOS on this laptop - if I try to start when there is a USB flash drive is connected, the splash screen just hangs. Today when I rebooted I realized that I had left a flash drive, then I got out and I tried to start it again, a couple of times. Whenever the computer crashes just indefinitely on the startup splash screen.

  Finally I gave him enough time and it takes the selection of Linux boot menu, so I tried to start my usual kernel but he gave me some message about a bad MBR.
  I kept trying to start, but the boot process is stuck, what happens is as follows:

  * The three lights on the left (power, battery and light) come on, no problem
  * HARD drive flashes white for a few seconds, then turns off. Occasionally, it will blink again.
  * At the same time, the screen is just stuck on the startup splash screen. If I try to press f2, f12 or any key too many times it will start emitting beeps whenever I press it. There is no way to get into the BIOS settings.

  Also, I can't boot from CD (Windows recovery CD or Linux LiveCD). Finally some kind of time-out of the entry into force, and the computer restarts itself to start the process all. Yay!

  I tried the stuff "unplug the power cord, remove the battery, hold down the power button / stop, plug back in, try to start" but nothing has changed. I also tried switching memory locations (only one chip of RAM, so I can't try a process of elimination on the RAM).
  Finally, I also open the door to HARD disk and removed the HARD drive, then tried to start. This time the BIOS has answered, if only to tell me that there is no appropriate boot media. At this point, the BIOS was responsive and I could change settings in there, but I could not boot from the CD.

  I thought I'd try resetting the CMOS battery, but I'm worried I'll damage something / make the problem worse. Someone at - it ideas? I know that the thing is still under warranty, but service centres are often slow and I don't want to lose the data from the hard drive.

  Any help would be really appreciated.

  > Finally, I also open the door to HARD disk and removed the HARD drive, then tried to start. This time the BIOS has answered, if only to tell me that there is no appropriate boot media. At this point, the BIOS was responsive and I could change settings in there, but I could not boot from the CD.

  It could be a problem with the CD/DVD drive what you think of this idea?
  Perhaps the BIOS does not recognize the CD/DVD drive properly and so there is a problem starting the bootable disc.

  In addition, it might be possible that failures of HARD drive and, therefore, you received an error message about the MBR (master boot record).

  Remove the CD/DVD drive and try to install the Windows booting from a USB flash drive.

  _Regarding the battery CMOS: _
  I would not recommend to disassemble the laptop because you could damage other parts and in addition it should know that the CMOS battery is not removable it s soldered to the motherboard

• Tecra 9100 splash screen & installation of corrupt Boot but OK on XP

  Hello

  I just 'inherited' the laptop above and when I got it it had this weird problem. When starting and in "Setup" the display is corrupt. In the start screen, this corruption takes the form of rows of small white lines and dots on any screen, but the screen configuration (or splash screens where you see white low resolution written on a black background) a significant number of characters is defined in the incorrect character (mainly the graphics/Wingding characters.) Corruption exists if the boot & configuration screens are in "Stretch" or not. Its almost impossible to see what the settings are on the installation screen.

  However, if I leave the laptop to continue and to start XP, the screen works great, really clear and non-dead pixels or corruption.

  I tried re-flashing with the latest BIOS (windows method), I F-Disked, then put in shape, then re-installed XP and applied SP2, then all drivers; However, the problem remains.

  Someone has an idea what is the problem?

  Thanks much for any help you can provide.

  Hello

  Sorry, but on this path is not easy to imagine what it looks like, but it's very strange question. I have a similar problem with my Tecra M1. When I watch a video file with Real player and remove the actual window the entire screen is suddenly fuzzy and there are a lot of points with vertical white lines.

  Just restart can fix it. I put really know why this happen and I can't do experiments because I use for work. In my opinion before using the unit to reinstall with the recovery media. On this way the unit will be installed properly and it shouldn't happen.

  If you are recovering the unit and if this action solves the problem please let me know.

  Good bye

• Splash screen, blurred or distorted after the PRAM reset

  Hello

  I had several problems lately with my MBP 15 inch 2011. Install the new OS X versions and updates point makes three beeps and reboot several times in quick succession. Those point updates will then appear as installed six times in the list of the updates installed the app from the App Store.

  Thinking this could be an issue that could be fixed with a STROLLER reset. I realized and noticed that the after reset the PRAM, the splash screen is blurred. Attached photo:

  

  Even once more my AMD GPU degrades?

  Thanks in advance.

  5 beeps indicates a RAM problem.

  You may experience a kernel panic.  Check through these instructions and post when it exists:

  https://support.Apple.com/en-us/HT201753

  Run Apple Hardware Test:

  https://support.Apple.com/en-us/HT201257

  Note that an error free AHT is inconclusive.

  Be aware of this program;

  https://www.Apple.com/support/MacBookPro-videoissues/

  Cioao.