Software free cs2 will not install

Similar Questions

• BlackBerry software? BBLink will not install and won't work?

  Using a PC with Win7, and have a new passport...

  I "thought" that get would allow me to sync my calendar from Outlook2010 Office with the Passport, but appears that I am wrong...

  Then found that this BBLink is the application - d/l-installed but then at the end he says «Sorry, you already have a new application on your PC...» "so he quit.

  Wanted - and years ago, I have called BBerry Desktop Sottware - version 7.1.0.41...

  When I start it up - he correctly identifies my passport, but when I try to connect - I get the error "device is not supported...". "because, it says that my camera, the Passport is running BB10.

  Then... How the hell can I synchronize my passport with my office, especially my Outlook calendar?

  Start again, uninstall all the BB software on your computer, if none will not uninstall use this: http://support2.microsoft.com/mats/program_install_and_uninstall

  Follow the info in this post to remove the remains.

  http://supportforums.BlackBerry.com/T5/BlackBerry-link/problem-installing-any-software-or-repairing/...

  Install the link then mix.

• Software Officejet 7310 will not install fully.

  Hello

  It could be a long, so be prepared, LOL. I took a number of steps before coming here. The original question was that my Officejet 7310 wouldn't print. I would get the error message windows XP has not been able to connect to the spooler or I could be on a VPN. So, I wasn't on a VPN but recently installed a web of Citrix plugin so that my wife could access his tricks to work.  So, I uninstalled Citrix. Any help, same messege. So, I thought that my driver printing or software might be corrupted so I came on the HP site and downloaded the new software and drivers, rub_w01_Americas_Euro1_NB.exe, a download of 448 MB approximately. Tried to install it, it is impossible to find my printer on the network. Reset Officejet 7310 network settings to the factory settings. Any help, software still cannot find my printer on the network. Came to HP.com and found an article that said that I should set the printers IP address to a higher range, I did. Still not good. Thought that the download of the original software might be corrupted, so I downloaded and tried to install again. Same result. Tried the HP scanning and print Dr. we found my printer, but still cannot install the printer. Downloaded a different driver/software package from HP.com, drv_rub_w01_ENU_NB.exe. He found and installed my Officejet 7310.  Problem solved right? Evil. Troubleshooting I uninstalled my player Director HP Photosmart and text. I downloaded the full software package once again, rub_w01_Americas_Euro1_NB.exe and now it is my printer but not complete installation. Only, it stops the installation and disappears. I get no messege installation has been completed or whatever it is. I have HP Director, photo software and reader of text re - install, but as I said, it just stops the installation and disappears.

  Has anyone else had this problem with this problem with this firmware? Can someone tell me how to install completely?

  Thanks in advance for any help.

  In addition, the printer prints correctly now.

  trektek,

  These problems with the installation can come from several sources and narrowing, it will solve the problem of the individual. If you want to properly print all previous issues, I would say running the doctor print and scan located here:
  http://goo.GL/Ujpib

  It can fix its own much and if not to give a better idea of what is happening. His control should inform you of any problems left by the installation software.

  Good luck!

• Software CyberLink will not install on Win 8

  H8 1380 t CTO, Intel i7 3820 processor. 16 GB of DDR3 Ram PC3-12800 memory. FRIEND bios (UEFI), Version 2.14.1219 (current).
  Pegatron Motherboard-IPIWB-PB (Pittsburg) Audio Beats. AMD, Radeon HD 7570-1 GB graphics card.

  Hello

  Installed Win 8 (own) on a second partition, (dual-boot factory Win 7 and Win 8 on the second partition). Installed all the software and drivers from HP for this system without any problems except for the elements of Cyberlink,"error 1603" code.

  Any suggestions on why Cyberlink programs will not install?

  Thank you

  Hello

  Check the compatibility of your products from Cyberlink here.

  The HP position maintenance for Cyberlink is only an update.

  If you have installed under W7 from Cyberlink, then try the "check compatibility" button to see if improvements are required.  So just try to install Cyberlink under W8 then click on the products tab Compatibile.

  BTW, nice PC.

• OfficeJet 7310: Officejet 7300 series software will not install on new pc Win 7

  My Officejet 7310 networked HP software will not install on my new Dell Precision Tower 3620 running Windows 7 64 bit.

  Downloaded file is: AIO_CDB_Net_Full_Win_WW_130_141.exe

  * When you run the Setup program, two errors that have occurred having to do with the system who don't not USB capacity or equipment. (There are about 8 USB ports that work, some USB 3.0, any other USB 2.0).

  * Try with disabled firewall doesn't change anything.

  * If I'm running the original printer installation disc, it downloads the new software and I find myself in the same dead end.

  Sitting next to this machine is my (dying) old workstation Dell Precision 390 with Win 7 and operate the HP and related applications very well Solution Center with the same network printer. (The two machines work protection antivirus Malwarebytes'.)

  It sounds crazy!  Any suggestions on how to fix would be greatly appreciated.

  Hello

  Run the Setup program and comlpete extrction process.

  Once the installation dialog box appears to put an end to this window.

  In Windows Explorer, press and type % temp % fall.

  Locate the most recent installation folder, which begins with 7z (e.g. 7z1234s)

  Open the installation folder.

  Rename the file named usbready.exe in usbready1.exe

  Back a levell and run the Setup.exe file.

  Now follow the installation and check for the difference.

  Please let me know the results,

  Shlomi

• 4200 software all-in-one printer will not install in Windows 7

  I have a 4280 printer all in one that works very well with Vista 32 bit OS. I really like the interface of HP. I had a Dell with Windows 7 Professional 64 bit desktop computer. I was able to load without any problems except the printer.

  I downloaded the latest software of HP 64 bits for the device 4280. Installation takes place upwards the agreement "accept" screen and when I check the box to accept (name and c drive location, features to install, etc.) and then press the "continue" button disappears from the HP installation window. There is no reported errors or system events that I can find.

  I tried all the suggestions on the site of HP for Windows 7 with no luck. I found Windows 7 install a driver immediately once you plug the USB connection. Tried a new printer / I drive with no luck.  I tried Windows 7 32 bit with identical behavior that disappears. I tried safe mode and diagnostic mode in case something was interfering... same result.  At least antivirus and firewall have been disabled and nothing else worked. I even ordered a CD from HP with the same result as the downloaded program. CHKDSK and scannow will find no problem with Windows.

  I can run the printer and the scanner with windows drivers, but the interface, especially for the scanner is not functional enough. I get kind of work in a virtual XP environment, but it is very slow and a little less functional loading... vista vs XP I guess. In short not a viable solution. I could buy a new all-in-one, but I'm worried it will not install and this can become costly experimentation, not to mention my stock of the 4280 cartridge.

  I would really like to find a way to get the HP software to install. Someone has an idea?

  Hello again Tom5223,

  I see that we still have problems installing the printer on your computer.

  I suggest to call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  A representative of HP has the ability to use more advanced troubleshooting steps and will be better equipped handle a problem like this.

  Thank you for your time.

• Google earth 5 free will not install

  Google earth 5 free will not install on vista Home premium s2 and has not been previously installed any ideas anyone?

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  Repost in the above programs Forum.

  See you soon. Mick Murphy - Microsoft partner

• I am trying to install CS5 on my iMac, after my computer crashed. I get a message saying that the software is already installed and will not install again. How can I install it again?

  I am trying to install CS5 on my iMac, after my computer crashed. I get a message saying that the software is already installed and will not install again. How can I install it again?

  Hi Marleneb3511919,

  I'm sorry for the inconvenience caused to you.

  I guess you tried rebooting your system?  If so, and the problem persists please try the steps listed in this document https://discussions.apple.com/thread/240851?start=0&tstart=0

  Please let us know if this goes through.

  Kind regards

  Aurélie hamadi

• OfficeJet Pro 8600 Plus: Scanner will not install software stopped working/Easy Start

  Unable to scan to computer, but has worked in the past. Error message indicates that the software HP for the Scan of the computer could not be located.  Have been trying to install it, it seems to be downloading but then says that it cannot install because no internet connection.  The connection is fine, works for everything else, shows very well in the status reports.  Tried several times, restarted the computer, nothing seems to work.

  Hi @SD58and welcome to the Forums of HP!

  I'd be happy to help you to install the software for your more than 8600. Using Safari or another browser? It seems strange to me that you can download the software, but then can not install, the installation requires no software. However, the Easy Start probably reaches out using internet to locate appreciate software to install. That being said, I feel the question could be linked so browser that I wonder what browser you use and if you could try another.

  Please let me know the result of using another browser and we can go from there. If using another browser resolves the issue, please click on accept as Solution to identify your post as solved.

  Thank you.

• Windows Vista Ultimate SP2 will not install update KB2378111 or install downloaded programs and returned with error code 80070570

  Hello... my computer will not install update KB2378111 with a code error 80070570.  In addition, I can not install all programs downloaded from the internet, specifically my anti-virus software.  I'm running without any software antivirus at this time.  I ran the most recent Microsoft malicious software removal tool and it showed that there is no problem.

  I'm running without any antivirus at this time software

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: see the "to install Windows by performing a clean install" (or "reinstall Windows Vista") http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  VERY IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update will not install downloaded updates.

  Win 7 pro x 64

  AVG AV worm: 9.0.869

  Zone Alarm Pro ver: 9.3.014.000

  Malwarebytes worm: 1.46

  SpyBot S & D worm: 1.6.2

  Ad-Aware Free (2010)

  This is my first post on this forum so excuse all the errors in the placement of the info.

  WU, MU will not install the updates downloaded or optional updates selected. No error code is given, it remains at 0% for as long I leave or I cancel installation. I tried to install individually in MS catalogue still will not be installed. This is a new computer that I built in July and punishment, it has not been used. It's strange because for the first three weeks of this computer, I had no problem with the installation of all available updates, or anything else. Then when the updates of August were available I chose all security updates and install optional updates that have already downloaded click on the button and nothing happened, it remained only on 0%. My question is, is there an update that was given earlier that caused these updates not installed? I really want to use my new computer, but I don't like to run without new security and the latest updates. I had trouble before what do.

  I used all the security software listed above on all my computers for about 5 to 10 years and non of them are set to prevent windows update from working.

  Please try another attempt to update, y d diddty. During the update installation fails again, close Windows Update.

  Open the WindowsUpdate.log and copy & paste in at least the last 50 lines or so, in your response, please.
  How to read the Windowsupdate.log file

  Meanwhile, suggest to configure Windows 7 to the clean boot and see if he can install updates in the clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE: in the Clean boot state ZoneAlarm will be disabled. Make sure that the native Win 7 firewall is now on in the Panel.

  While in the clean boot state, you can also try to download and Save the Fixit found here -How to reset the Windows Update components?
  Once the download completes close all open programs and browsers.
  Now launch Microsoft Fixit 50202.msi and choose the default mode.
  When it has finished turn the system reboot to clean it from same start State and see if updates can install now.

  If no joy, run the Fixit once more and choose aggressive mode.
  Then restart on the same State of clean boot and see if update succeeds now.

  Expert MowGreen Windows IT Pro - consumer safety

• Will not install KB947821. Error code 80073712.

  Will not install KB947821. Error code 80073712. Although the update KB978207 has been correctly downloaded and installed after that. All this happened after the uninstallation of McAfee antivirus. Also, I'm sure that for this reason, IE8 now does not load all run any activex so content. Downloaded and run the uninstall McAfee tool but no change.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the page following before otherwise connect the machine to a network or the internet and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. Even if the trial version is not enabled, you MUST uninstall it and download/run the appropriate removal tool before you install updates, Windows Service Packs or IE updates and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• computer laptop 15-fo39wm: updates will not install

  I have updates that will download, but will not install

  Hi @help987 ,

  Welcome to the HP Forums!

  It's a great place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you encounter a problem installing your Windows updates.

  Please try these steps.

  Method 1:

  I would suggest to run Windows Update to convenience store and check if it helps.

  (a) press the Windows Key + W key on the keyboard.
  (b) resolution of the problems of type in the search box, and then press ENTER.
  (c) select Troubleshooting. Click on show all the and select Windows Update and follow the on-screen instructions.

  Method 2:

  I suggest perform you a boot in minimum mode and disable the security software and check if you are able to install windows update manually.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  (a) press Windows + R Type msconfig in the search box and then press or click on msconfig.

  (b) the Services of the System Configuration dialog tab, tap or click to select the hide all Microsoft services check box, and then press or click disable all.

  (c) on the start-up of the System Configuration dialog tab, tap or click Open the Task Manager.

  (d) the tab to Start in the Manager of tasks, for each startup item, select the item, and then click disable.

  (e) close the Task Manager.

  (f) on the start-up of the System Configuration dialog tab, press or click OK, and then restart the computer.

  Note: once you have finished troubleshooting, follow the steps in "How to reset the computer to start as usual after a repair by clean boot " to reset the computer as usual.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Download and install the update manually and check if it helps.

  Follow the steps to install the update manually:

  a. go to the Microsoft Download Center page

  b. type the number in the search box and press ENTER.

  c. download and install the update and check if it helps.

  You can see the steps in the following Microsoft article.

  Problems with installing updates

  Good luck!

• HP Deskjet 1056: HP Deskjet x 64 will not install on Windows Vista

  HP Deskjet 1056 will not install on Windows Vista

  Hello

  Remove the complete software for printer. Download the latest drivers and software from link below and installation of ty.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=372330&

• HP Photosmart C4780 all-in-One: Photosmart C4780 will not install on laptop dv7 Pavilin

  My C4780 will not install on my computer laptop dv7. I downloaded the current software on the HP site and tried to use the disc that came with the printer. In both cases, that the installation program begins to run, goes through four steps and when it is installing updates, it disappears from the screen. I do not understand that because it has been installed and operating at once through my wireless network and still work on my desk. I totally uninstalled all the software before you try to reinstall. I even checked to ensure that the appropriate records were in place after not install for the first time. I went through this about six or eight times, try different things each time. I also disabled my antivirus (Panda Cloud AV) and that made no difference. At this point, I'm out of ideas and really need help. I also read some relevant posts in this forum without good results. I need help in the worst way! Thanks in advance for any help.

  Sorry it took so long to get back but things have been hectic. I really believe that my problem was one or more files that are damaged somewhere, so I took the easy way and installed Windows 10. After that I installed the printer and everything is fine now. But I really appreciate your help.