Solution: CD - RW / DVD Rom stutters or has choppy playback

Similar Questions

• CD/dvd-rom is not reading or writing

  I had a virus and my computer crashed, I have a friend who fixed it and itried play a dvd, but it cannot locate the cd/dvd rom that someone has suggestions?

  Hello

  Due to virus I ran Stage 3 and even if maybe stage 4 the CD/DVD drive
  started working without them.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  ===============================================================
  ===============================================================

  Step 3: Since you had a virus use these:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------

  Step 4: You may need to try an InPlace upgrade/repair facility that allows to keep
  programs and data backups however redundant are always a good idea. Then you might need
  to recheck the best stadiums 1 and 2 above.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Qosmio G30 - DVD-ROM drive has stopped working

  I have a Qosmio G30 age of 3 years and the DVD - ROM drive has stopped working.

  He still pulls in, but it will not read or burn discs.

  I received a quote of £360 Toshiba to adapt to a new one that seems generous.

  Anyone know where I could get it fixed cheaper than you?
  Or better yet... anyone know where I can I get it fixed?

  David Hutchinson

  Hello
  This is not an answer to your question but can solve the problem if it is the same that I had.
  In my case, the drive tries to spin but it slips. Only the motor shaft rotates and the drive remains at low revolutions that were not even stationary.
  The problem was caused by the fact that the plastic part (black color) of the mechanism which engages the disc (CD or DVD) slips on the
  motor drive, axle and th couldn't do a full rotation or runs at the specified speed.
  The solution is to delete the article in plastic and put a small amount of super glue on the axle and then put it back.

  Where there is a similar issue, I hope that solve you it like I did.

• CD/DVD-Rom on a Satellite 1110 laptop has stopped working

  Hello

  The CD/DVD-Rom on my satellite 1110 has suddenly stopped working. When I insert a cd or a dvd there is no activity in the drive and when I look in my computer there is no recognized files.

  I used the Device Manager and it says that the device is working normally. It's like the PC just can't 'see' the camera more.

  I used the program of troubleshooting without success and I was wondering if someone technically a little more spirit that had me ideas

  See you soon

  Rob

  Hey, sorry cannot be of any help to you, but I'm having exactly the same problem. I can't find a place to download the new drivers.

  did you progress?

• I want to know if my computer has double layer dvd rom

  Hello, I just want to know if my computer (it is a HP Pavilion TouchSmart all-in - One desktop PC 23-f270)

  has a CD-ROM drive in dvd double layer.  I've looked everywhere and I can't know this.  If this is not a dvd rom double layer, are there all downloads to change this or are there other options out there for me?

  Hello

  You can visualize all the multimedia capabilities of your optical drive using the free app at the following link.

  http://www.VSO-Software.fr/products/Inspector/Inspector.php

  Kind regards

  DP - K

• _NEC DVD_RW ND-3540 has and HL-DT-ST DVD - ROM GDR8163B

  Recently, I noticed that the computer does not recognize any CD or DVD, then I looked at my computer, and (a DVD r/rw) and DVD - ROM drives have disappeared. In Device Manager, two disks have by them exclamation points. I tried to update the drivers, but Windows could not find an update or another. Where can I find the drivers for "_NEC DVD_RW ND-3540 has and HL-DT-ST DVD - ROM GDR8163B?

  Please read the next page & run repair tool:

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  For more software related troubleshooting visits to:

  http://support.Microsoft.com/kb/982116

  S.Chatterjee

• My Satellite M40X: DVD Rom has had serious problem

  Dear friends,

  my laptop worked for 3 months without any problem.these days when I put a CD in DVD rom is not recognized and a error message on the screen that says that no cd is in the drive.could would be a software problem or it's definitely a hardware malfunction. I look forward seriously to your instructions

  Amir

  Installed some burning software, burning plugins or something similar? In most cases, these programs are the troublemakers. Try to uninstall all your burning stuff, and maybe it's a good idea that you download a reference (such as ultimate boot cd cd; Link: http://www.ultimatebootcd.com/download.html) or memtest (http://www.memtest86.com/) and try to boot from the cd. When the CD starts correctly, then you know it's something with the configuration of your software.

  Try it :)

  Welcome them

• my dvd rom hitachi gd-5000 error 12 has been suddenly removed from computer

  My hitachi dvd-rom gd-5000 was was computer unexpectedly now will not play a dvd or cd rom drive

  Hey, Vino,.

  The first thing you need to check is if you see the optical drive that is reflected in the Device Manager (start > run > devmgmt.msc > optical discs CD/DVD)

  1. If so, then follow the steps below.

  Click on the Start button in your desktop computer, and then click Run.

  In the Open box, type the following text:
  Regedit.exe.

  Click the OK button.

  Click on the plus sign (+) next to HKEY_LOCAL_MACHINE.

  NOTE: When you click the plus (+) next to a folder, it will expand displaying the folders it contains in the left pane of the registry editor. When a file is highlighted, the contents will appear in the right pane of the registry editor.

  Click on the plus sign (+) next to SYSTEM.

  Click on the plus sign (+) next to CurrentControlSet.

  Click on the plus sign (+) next to control.

  Click on the plus sign (+) next to the class.

  Click {4D36E965-E325-11CE-BFC1-08002BE10318}.

  On the right side of the window, click UpperFilters.

  Click on edit in the menu bar.

  Click on remove and then click OK.

  On the right side of the window, click LowerFilters.

  Click on edit in the menu bar.

  Click on remove and then click the OK button.

  Click Register and then click on exit.

  Restart the computer normally.

  NOTE: once you have completed these steps, check for other CurrentControlSet records in the registry that can be titled CurrentControlSet001, CurrentControlSet002, CurrentControlSet003 and so on. If these files exist, you must follow this procedure for every folder CurrentControlSet delete upper and lower filters.

  2. If not, please let us know where you are not able to see the optical drive, that is my computer, Device Manager. What happens when you insert a CD/DVD?

  Saurabh yapi | E-mail address is removed from the privacy *.

• XP has no DVD-ROM when purchasing drive

  When I bought my Microsoft Windows XP SP2 first, it doesn't have a DVD - ROM drive. How can I change my current drive, a CD-ROM drive, a DVD - ROM drive quickly, efficiently and without a purchase?

  You cannot change the hardware specifications of your existing optical drive. Buy a DVD - RW drive (no interest in buying a ROM) and install it. It is easy enough to install an optical drive. MS - MVP - Elephant Boy computers - don't panic!

• How can DVD - rom disabled computer says it has a code 22, I get the dvd - rom to work

  My toshiba laptop, I cannot activate dvd - rom. He says I have a 22. code can you tell me how to activate the dvd - rom. thank you...

  Hello

  Check with Toshiba Support, their drivers and documentation online and ask questions in the forums on
  known problems.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  =================================================================

  This problem may be caused by the presence of too many CD/DVD programs competing for resources,
  especially by these programs that run at startup.

  Code 22
  http://TechNet.Microsoft.com/en-us/library/cc731267 (v = ws.10) .aspx

  How to fix the Code 22 errors
  http://pcsupport.about.com/od/errorc/a/code-22-error.htm

  How to enable a device in Device Manager in Windows Vista
  http://pcsupport.about.com/od/windowsvista/HT/enabledevvista.htm

  If necessary:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• S1800-814 DVD-ROM replacement

  Hello
  I would ask you whether it is possible to replace the DVD - ROM drive on my satellite 1800-814. I want to buy a DVD - RW (for example NEc 6500 has), but I'm not sure of the compatibility.

  Thank you

  Hello

  As much as I know there is no public information about it. In my opinion, you should try to pick up some information of service partners. I'm pretty sure that can give you correct information.

  You can also try with the external solution but the problem is that your camera has just USB 1.1 and data transfer will be very fast.

• DVD - ROM SD-R2412: difficulties of recognition of CD

  Hello

  I scoured the forums a lot, but I can't seem to find a solution to my problem. I have a Toshiba SA20-S103 with a DVD - ROM SD-R2412, which I use mainly for burning and playing music. CD - R that I use are Fujifilm 700 MB (up to multispeed 52 x) CD - R.

  Until a few weeks ago, as everything worked perfectly, but all of a sudden my drive seems to have trouble with freshly created audio CD playback when playing a new disc, it starts to jump sooner or later, if it recognises the disc at all. The funny this is that there no problems with playback of the original CD or CD I burned more there.

  If I take a quick look at the back of the CD, I have created, it is very difficult to differentiate between the band of burning and the burning/empty Strip, while normally, the contrast between the two parties is quite obvious. It almost seems as if the laser in my drive lens became paler or lower, but it's probably nonsense.

  However, both my CD drive laptop and my stereo recognize and read these discs perfectly, so I am not sure the data they contain are fine. I have already tried using Windows CD Creator instead of Nero, but has not made a difference. I don't know much about computers, so any help would be more than welcome.

  Thanks in advance,

  Antoine

  [Edited by: admin on 22 May 05 19:49]

  I forgot to mention that I already tried to clean the lens of the laser with a lens CD cleaner, which, unfortunately, has not made a difference.

  Antoine

• CD/DVD-Rom drive does not not on Equium A100

  I installed a webcam, and it made my DVD - rom drive does not not with all drives. I uninstalled everything to do with the webcam and it still does not work. Can someone help me solve this problem without using the recovery disk of the product came with my laptop?

  I had this problem before, but I didn't the first time, it's the webcam that has caused the problem. It s webcam trust wb - 1400T. I had to use the product recovery disc and he had a lot of hassle to install all my programs again and this time I'm in the middle of exams and can't get it all done in time for my exams, as I have vital work on here I have to do.

  .. .Please help me... I think it is the driver, but I don't know how to fix it.

  Hi mate

  > I installed a webcam, and it made my DVD - rom drive does not not with all drives
  To be honest I have never seen that the webcam may have a negative influence on the internal CD/DVD drive.
  I see really no connection between the webcam and ODD... very strange
  Do you get any error messages?

  Anyway, in my opinion, you should try these solution ideas;

  (1) remove the drive from the Device Manager CD/DVD and restart the laptop. After restarting again the operating system should recognize the STRANGE and should re-install the drivers.

  2) access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  .. then restart the laptop.

  (3) download and install the tool freeware "CCleaner". This tool repairs registry and solves several problems in System.

  If this does not work, then the new installation of the OS would be wise to check if the problem could be related to a software problem.

  Best regards

• Satellite Pro 2100: CD-ROM/DVD-ROM is missing - error code 39

  Hi all

  After an unsuccessful attempt to install a key USB TV, my DVD/CDRW drive has disappeared. It still works, I can hear it working, but Windows XP does not know more that the computer has this feature. It also is not upward under 'my computer' more. System Device Manager also tells me there is a problem (code 39), and displays an exclamation point in front of Mat * un UJDA740. What can I do? How can I recover my CD-ROM/DVD-Rom drive?

  Thank you
  SHL

  Hello

  This issue has been described a lot of time in this forum, and the solution has been found.

  Please check this forum announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

  I guess that the solution to this Microsoft Web site will help you:
  CD-ROM drive or DVD-ROM seems to be missing
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;320553

  or

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;314060

  I hope I could help

• Satellite A200 - 23P - mechanic of DVD - rom does not

  I'm sorry for my English in advance this topic! -Thank you

  I have a very big problem with my engraver of DVD (RM).
  I bought SAT A200 - 23P three weeks ago.
  The Win VISTA operating system has been installed. DVD - rom worked well.

  If I have installed Win XP to the second partition on my HARD drive (to install the disk with driver for sata drive in nlite) and installed all the drivers and utilities for Toshiba laptop, I found that my DVD-rom is not working while I press eject button.

  Mechanic of DVD is not responding to eject in XP and not even in the BIOS!
  It is interesting, mechanic DVD is the detection in BIOS, detects in XP, XP operating system votes - mechanic to the DVD works properly - its fable.

  However, if I have installed XP on the second partition, Win Vista does not load :(
  I don't have a second chance for second selection (Vista and XP).
  I now have XP only, even if Vista is on the first partition - I didn't delete it.

  Do you think that the DVD-rom is HW or SW problem?
  I think that, given that the DVD-rom does not in the BIOS - HW error.

  But is very strange, if I install XP from mechanic to the DVD and then close is, DVD - rom does not...:)

  If I manually open and insert the CD, the DVD does not (diode led no blink, just if I turn off the computer, led blinked once).

  PLS help me someone-

  Thank you!

  Hi Michal

  Your question is very strange, I mean the number of CD/DVD drive

  The fact is that the readers of CD/DVD eject function functions should any operating system has been installed on your laptop. It has nothing to do with your software on the HARD drive.

  So I wonder why the eject button works with Vista and not XP preinstalled OS?  :|

  My only plausible explanation is that sometimes there is a bad connection between the laptop and the drive. However the problem could be related to the hardware problem too

  As you see it s not easy to say what's wrong exactly, we can only speculate.

  Now some details about your installation of OS double.

  You cannot choose between Windows XP and Vista because Vista boot manager was obliterated during the installation of Win XP.
  This happened to me also. I installed Win XP on my Satellite and could not start Vista.

  The solution was simple; I used another original DVD of Vista (from my friend) and booted from this DVD. Vista has renewed the Boot Manager, and then I was able to boot Vista.

  Then I downloaded the tool called Easy BCD.
  This tool can change the Vista Boot Manager settings. I've edited and inserted a new Windwos XP OS entry.

  That s it!