Solutions as exer1.prj tutorial mission

Similar Questions

• I have over a loudspeaker in the taskbar

  I have over a loudspeaker in the taskbar

  I have over a loudspeaker in the taskbar

  Suggestions;

  1. This is the best solution.
  Use this tutorial:
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Note:
  Use method 3. It applies to all versions of Vista and much simpler. (Read the other 2 methods, but don't waste your time to use).
  Make sure that you restart the computer.
  Keep the reg file that is on the desktop. Use next time when you have the same problem, instead of fishing for the tutorial again.

  2. this method rarely works because you find the area you want to put a tick is grayed out (unclickable). Here's the method...
  Right-click on an open space of the taskbar > properties > Notification area tab > check volume > OK

  3. do a system restore. Choose the date on which the Volume icon in the taskbar as your restore point.
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Well, when I manually put my computer to sleep or simply close the lid of my laptop, it reboots completely.

  I had this problem before. I resolved for a few days, but then the problem reappeared. So I decided to wipe my hard drive and reinstall Windows Vista Home basic. I have Acer Aspire 5735-4774, 32-bit. I already went through all the parameters of power and its advanced settings as I was told the last time. Everything seemed OK, but I still have the problem.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  How to solve a problem of Mode for Vista and find a Solution

  Read the tutorial above and the 'related links' it:

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  See you soon. Mick Murphy - Microsoft partner

• Problem starting up on top of the mode 'sleep' in Vista Home basic

  Hello
  Since then, I had a memory and a processor of high grade on my HP Pavilion Desktop and can not restart after you put the computer in mode 'sleep'.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  How to solve a problem of Mode for Vista and find a Solution

  Read the tutorial above and 'related links', including this one:

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  See you soon... Mick Murphy - Microsoft partner

• At the office, InDesign works very well. At home, it totally crashes and all I get is the reel spinning death everytime I go near "file." Is there a solution? I can open a previous file or start a new popup tutorial, but if I try to approach

  At the office, InDesign works very well. At home, it totally crashes and all I get is the reel spinning death everytime I go near "file." Is there a solution? I can open a previous file or start a new popup tutorial, but if I try to get close to 'File' to place an image, he out craps. Is there a solution?

  reset your preferences -: https://forums.adobe.com/thread/526990

• Cannot assign Launchpad and Mission Control to their default function keys

  Given that I've updated my Mac Mini to 10.11.3 pressing F4 doesn't have to rely on the Launchpad. The same with Mission Control and F3. I tried to use Launchpad to this key in system preferences, but would not take the selection of key. Does anyone know a solution to this problem? I use an Apple Wireless (Bluetooth) keyboard.

  What happens when you press these keys?  What about other f keys? Is this always the case when you connect as a different user, for example, comments?  You continue to experience this behavior when you start in Safe Mode?  Have you tried to reset NVRAM and PRAM?

• 10.11.3 mission Control "Show Desktop" does not work with 3rd party keyboard

  I use a KENIMBENI Multi sync Bluetooth keyboard as seems to be the best solution when you want a wireless keyboard with a numeric keypad on a Mac.

  The KENIMBENI keyboard has its own combination of keys rather than Apple-command 'Mission Control' 'Show desktop '. It was working fine until 10.11.2. But now, after upgrading to 10.11.3, I find no way to make this button (or any other combination of the command 'Show desktop') works. Some key or combination of keys I enter the keyboard and/or the Mission Control preferences pane, will be shown on the screen, but the system does not react to it. I also tried switching to use several spaces to use a single space extending on my two monitors, assuming that it could have to do with behavior change - but none of this helps.

  I have an another Mac Apple original wired keyboard, and here the command-'Mission Control' combo works fine as expected.

  Can any that confirm - and perhaps know no work around? I'm a little old school management Finder and file and so use orders 'Show desktop' several times a day. Thanks in advance for your suggestions!

  You should discuss with the developer of the material. If it works for your OS with material Mac the fault lies with the proponent to provide a usable instance of this device with a newer OS, if they wish. In addition, we use a Logitech wireless keyboard solution full size and they are solar powered so no battery and no problems so far.

  http://www.KANEX.com/contact/TechSupport

• Tutorial of 2014 VeriStand missing Info

  The tutorial VeriStand 2014 said to add a custom flag called "Helicopter (3dView)" which is a LabVIEW control 3D image containing a 3D animation of the helicopter which is based on this tutorial.  However, it doesn't tell you how to add a custom indicator or where to find this 3D photo "Helicopter (3dView) control indicator.

  I looked around the VeriStand workspace and I can't find anywhere that says custom controls or indicators.  Also, I looked in the files on the disk for the helicopter 3D above without success indicator.

  EDIT: I opened the solution in phase than i and he could not load the 3D model and the digital slider (which I did not).

  Fix is in place. Re download, uninstall and then reinstall

• Solution Center not recognizing my HP printer?

  Hello

  I'll do a tutorial on how to solve the problem with the solution Center does not recognize your HP printer.

  

  First of all, you need a L3 uninstall from the CD or the full software features.

  Here are the steps to do:

  Try using the brush included in the CD or download.

  Of the original printer installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4.bat uninstall_ for computers not HP.  For HP computers, run the Uninstall_L3.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9. use this tool to clean the registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damage or loss of data caused by the utility.  This step is optional.   You can skip if you want.

  http://download.CNET.com/advanced-SystemCare/3000-2086_4-10407614.HTML?part=DL-6271865&Subj=DL&tag=b...

  10. download the full feature software and drivers

  11 start the download to reinstall the printer

  Starting a download:

  1. run the disk cleanup on your computer

  2. download the full feature software and drivers

  3. once the download is done retrieve, cancel the download.

  4. press on the Windows key + R on the keyboard to bring up the run menu.

  5. tap folder in the field to run, and then click OK.

  6. Locate and open the folder starting with 7z (example: 7zS2356)

  7 open the Util folder

  8 open the CCC folder

  9. run the L4.bat uninstall_ for computers not HP.  For HP computers, run the Uninstall_L3.bat

  10. once the uninstall is complete, restart the computer

  11. install an Accessories\ System Tools Disk Cleanup

  12. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  13 use this tool to clean the system and the registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damage or loss of data caused by the utility.  This step is optional.   You can skip if you want.

  http://download.CNET.com/advanced-SystemCare/3000-2086_4-10407614.HTML?part=DL-6271865&Subj=DL&tag=b...

  14. download the full feature software and drivers

  15. run the download to reinstall the printer

  Once you have completed the steps, you can begin to install the software of complete functionality on the site of HP. This will ensure that you have a complete installation without existing software and overlapping on the laptop / desktop.

  From there you should be able to use the solution center as you wish. If you have any other questions let me know.

  THX

  Let me know the results.

• Solutions of workaround for missing Officejet 6500 a (E710a-f) features?

  I recently bought an Officejet 6500 a (E710a-f) and found out that the driver does not have two important elements, I had supposed wrong would be included, as they have been available on Deskjet printers for many years: print preview and manual duplex printing. Manual States simply to print the odd and even pages separately - has a challenge at best when I'm printing that does not offer as an option and it doesn't seem to be an option to preview before printing at all.

  First (manual duplex printing): I've seen ads for the 6500 has more (E710n) which include a manual double-sided printing, so I wonder if the 6500 is able to use this driver if I install it without causing other problems. If not, anyone know of other alternatives for double-sided printing?

  Second (print preview): unless my work application has a preview feature before automated printing, other than printing to a pdf (such as CutePDF) creator and the review of the layout in a viewer (like Adobe Reader) PDF, is there a simple way to get a preview of the text before printing?

  Finally, I believe there is a good reason why these features - available on Deskjet printers for many years - were left out of the Officejet 6500, but I have not yet found. If someone who understands print drivers can explain it to me, I would appreciate it. Thank you.

  ( Updated 26/07/11: 1) Re duplex printing: I found a video on the HP support Web site, which offers a solution in two steps for double-sided printing: first, print the odd pages and even pages (a two-step process). It would be great, however, if there is a driver who would do this in one step, as there has been on SEVERAL HP Deskjet of printers in the past. Is there an existing printer driver that makes manual duplex printing it will work with the Officejet 6500 a?

  (2) re print preview: no luck at all with "Print preview." Still, any suggestion would be appreciated. If personal HP monitors this forum, please let me know if it is a futile effort, or is there a solution to this problem. I lose a LOT of paper by not being able to check what the final provision of the documents will look like before you print!

  @ drbb01

  I've been looking for a solution for several hours and finally found one!

  I have a tutorial that explains how to install an alternate driver that can handle manual duplex printing.

  The driver being used is the driver for the Officejet Pro K550 Series printer. But I don't know if you follow each of the steps in the tutorial to make it work. Unfortunately, the tutorial is in German...

  If you still need information informed me an I'll try to translate the tutorial in English.

  My regards, Marc

• I get the error message, the Windows Installer Service could not be found, is there a solution?

  I get an error message, the Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly.  Is there any solution for this?  Also I can't find service.msi.  Make sure you typed the name correctly and then try again.  Any help I can get for this will be appreiated.  System restore not working anymore.  Carolyn Stallings

  Always, always, first specify what operating system you are using before you begin to explain the problem.

  Try this tutorial. It works for Vista and Win 7.

  http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/

• speech recognition only works in the tutorial, how can I activate this thing?

  The the command links that I click nothing doing, there is no icons in the taskbar. menu start has no effect. None of the menus Troubleshooting provides solutions

  I want to start using. all indications are that the hardware is fully functional. Tutorial works very well.
  Hello
   
  Create a new user account and check if it helps.
  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
   
  If the problem is resolved in the new user account, this means that the old user profile is damaged.
  Here is the link to repair a damaged user account:http://windows.microsoft.com/en-US/Windows-vista/Fix-a-corrupted-user-profile

• SOLUTION EXPLORER. EXE in windows 7 problem

  Hello
  Please tell me the solution for explorer.exe as it is automatically cancelled or its screen the message your Windows Explorer not working...... plz asap give me a solution
  thnx in advance
  respect of
  Sumit Rabisson

  Hello

  Please tell me the solution for explorer.exe as it is automatically cancelled or its screen the message your Windows Explorer not working...... plz asap give me a solution

  thnx in advance

  respect of

  Sumit Rabisson

  Suggestions:

  1 do a disc check chkdsk/f/r...
  Start button > Search box, type cmd > look up, right-click on cmd.exe > Run As Administrator > in the black and white window, at the command prompt flashes, type chkdsk/f/r > press the Enter key.
  Note: there is a space between 'chkdsk' and ' / '.

  The screen will say something like cannot do it now, but you want to run it on reboot. Click on 'y' as in Yes > press > window cmd of output.
   
  Restart your computer. It will take a while. DO NOT stop the machine. Just wait.
   

  2. If the above any help, take a look at this tutorial:
  http://www.webtlk.com/2009/02/18/how-to-fix-Windows-Explorer-has-stopped-working-in-Windows-7/

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I also, I get the error "the service user profile Service has no connection, failed to load the user profile" but I have not been able to correct the problem by following the listed solutions.

  I got the error "the service user profile Service has no connection, failed to load the user profile" when you try to use my desktip.  It is on the login page.  My account icon loads and the guest account. I have enter my password as an administrator and get the error message listed above. I followed all the solutions I could find and it is not corrected.

  I have a slight hitch, after several failed here, I checked the domestic Group on my laptop and I have high listed as connected to the Group Home Office; with all the files.  How can I fix the desk top to coinside with his status of being online.  Yet once, my counter top will not recognize the password, but the desk top shows online in the home group.

  Home Group is Windows 7.

  Here is the Vista Forums.

  What operating system do you use?

  Vista info below:

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• No given solutions have set the 80070002 error when searching for updates

  Hello, I made a comment on this post , but got no response, and I thought of making a whole new discussion was needed to really find someone who knows how to solve this problem. I suffer from the same problem as the person who posted that - whenever I try to search for Windows updates, it fails and gives Error 80070002. I tried all the simple solutions that are posted on the sites Web de Microsoft, and none of them have worked so far. As I mentioned on the linked post, while manually resetting Windows Update components, some DLLs gave me errors when I tried to register them in the registry.

  These all told me the module has been loaded, but Windows could not find DllRegisterServer...

  Mshtml.dll
  Shdocvw.dll
  Browseui.dll
  MSXML.dll
  qmgr.dll

  ... While they all told me the impossible load module.

  Gpkcsp.dll
  Sccbase.dll
  Slbcsp.dll
  initpki.dll
  wuaueng1.dll
  wuweb.dll
  c:\windows\system32\muweb.dll

  Is there another possible solution that I can try? It is very important for me to solve because I have some reason to believe the failure of Windows updates is also preventing me to install updates required for Visual Studio and its distribution of C++, even manually, but I don't want to digress too evil.

  METHOD 1

  Use the following tutorial to reset Windows updates completely and check if it helps:

  Full updates to reset Windows

  If this does not help:

  You now have two options:

  • Do a system restore and go back to date on updates worked.
  • Upgrade repair that keeps everything and installs windows.

  I can provide you the steps for the 2nd.