Some advice for a new developer ODI

Similar Questions

• Looking for advice for a new user to vmware

  Hi all

  Looking for a help and advice for a rookie to vmware

  We have just purchsed 3 x DL380 G8 each with 8 x 1 TB HARD drive no storage shared, and we are currently approved for most part more packs 2 x.

  What I wanted to do was to reproduce some VM so if one breaks down then we can either manually or automatically start another on another host. I'd like to reproduce our exchange 2010 essentially server but that is currently on the phyiscal material and I would need to first do a P2V conversion. I also read a few negative articles on running exchange on a virtual computer.

  I had read a little and looks like FT is outside the quetsion because of having not shared storage in place and there is also the limitation of 1vcpu. So I was wondering where to start really. For any tips, pointers, etc. will be very much appreciated.

  Thanks in advance for any help.

  Welcome to the communities...

  As you use Essentials Plus, you can order vSphere Storage Appliance you can use a shared storage. Make sure that the hardware is compatiable with vSA (http://blogs.vmware.com/vsphere/2012/12/major-hcl-changes-for-the-vsphere-storage-appliance-vsa.html)

  What I wanted to do was to reproduce some VM so if one breaks down then we can either manually or automatically start another on another host

  vSphere HA done for you if you are eligible.

• Could use some advice for new Linksys E2500 please

  Just bought this for my parents and trying to implement. Never had any problems of implementation of a router in the past. After poping in the installation CD, the display shows all hang up, what I do. Then click on next, where it says 'Search network', then quickly changes to the "connecting to network", and then it says that it 'can't find router.". Made a mistake.  Check the settings, etc. Well, I know that the modem works fine, and I know that the router cables are properly connected to the modem. I can switch back to the old router (hook up looks exactly the same), and everything works.  (They have problems with bandwidth, which is one reason I bought a new router for Christmas).

  Also the same message if I connect directly to the new router VIA an ethernet cable. In addition, it's strange: when I just open a web browser and try to connect on the router 192.168.1.1, using no username admin password, it won't let me to the router. Even after I reset the router with a pen.  How is that even possible?  It should be default to the default password.  So now that I can't even try to configure it manually.

  Very, very frustrated and I could use some encouragement and direction. Please?  Quite a few please?

  SO, just in case anyone is interested...

  I tried to reset the router again, and that fixed it all. All the lights are flashing the first time I did, but the last time did the trick.  I knew that there can be no meaning for the default password is not working. I guess I'm not hold in the reset button long enough.

  A prime example how frustration can create more frustration. Lesson learned... once again.

• Satellite A200-1AH - need some advice for hard drive replacement

  Nice day

  I've been using a + A200-1AH + for three years. Unfortunately, I suffer from problem of free disk space. So, I decided to replace my drive with a new one.

  How can I know the HDD I buy will be suitable for my laptop?

  Can you please tell me what era the + key-points + I need to know when buying a new hard drive for my laptop?

  Post edited by: alicozgo

  I changed the subject, because it was so dumb. Why would I ask 'what hard drive buy' in a Toshiba forum :) what a forum administration...

  Hello

  Satellite A200 is a more recent series of laptops. This series of laptop use and support the SATA HDD controller and this means that you need a SATA HDD!

  The laptop runs the 2.5 hard drives. The speed of the HARD drive is not very important for compatibility so that you can choose 4200 RPM or other

  In addition the SATA controller has no limitation in size so THEORETICALLY, you should be able to use hard drives with 320 GB or more
  But in some cases rare BIOS would not be able to manage some HARD drive sizes, but this generally isn't the case

• Equium A200-1V0 - need advice for the new series of laptop

  I want to replace my Equium A200-1V0.
  I don't know not in range it originally was - base or more?

  What would be a good replacement for it now?
  What I use my current for internet, email, Word/Excel and simple games. I also use it to listen to the music and the iplayer.
  HD, also used to store photos and iTunes.

  I have a budget of about £300-£400
  Minimum specification of:
  Memory - 2 GB
  HD - 200 GB
  Intel processor - NOT a Celeron - duo or preference i3
  stereo speakers
  at least 2 USB ports
  HDMI port - optional
  Screen 15 ''

  Thanks in advance...

  Hey,.

  There are several laptops Toshiba with 15 screen I think that the important point is the price because other requirements such as 2 GB RAM, 200 GB, etc are no problem. Most laptop have 4GB or more of RAM and also tough with more disk space.
  Moreover the Intel Core i3 processor is standard CPU at the moment, some models have a Core i5

  Take a look at Satellite C650, L650 and L750. These models are to fundamental factors such as Internet, music, videos and simple games.

  You can compare all models on the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com/innovation/family/

• I need some advice for the Satellite L630/03

  Hi all

  I just bought my first Toshiba L630/037 (http://www.mytoshiba.com.au/products/notebooks/satellite/l630/psk04a-037001/specifications#details) and I'm really excited that I'm waiting to load for hours first 2 or if, after perform you a unboxing conversion it!
  He looks bloody awesome and I can't wait to start using it!

  You have a few questions:
  1. when I received it, the sticker that keeps the top down was already torn (as in a person already open).
  The clerk said that everything is fine with it, so we opened it to check that the main seal for the laptop has not been broken and that the adapter and cable was there. Now that I'm home and I have everything out, I noticed that I have no CD.
  Is that suppose to be right? I'm a bit confused because the last laptop that I bought a few of the installation CD and the drivers that came with it. In addition, is there something else I should be aware of that should have been in the box?
  All I have is the power cord, power adapter, manual, portable with battery already in it.

  2. in the purchase, there are already standard warranty 1 year that comes with the laptop. I noticed on the Toshiba site, you can buy an extended warranty. Should I buy now? Or can I get, say 1 week before the end of year 1?

  If anyone has useful tips or advice that would be greatly appreciated!

  See you soon!

  > I took everything out, I noticed that I have no CD.
  Yes, that's right. No CD is delivered pre-installed Toshiba Software is on the HARD drive and you can create a clean recovery disk! Please see the operating manual!

  > Should I buy now? Or can I get, say 1 week before the end of year 1?
  Well, as far as I know you don t need to buy the extended warranty immediately after the laptop was purchased

  I found this info:
  > Q: When can I buy the extended warranty?
  > A: the extended warranty is eligible to purchase, during the period of warranty the laptop
  http://www.MyToshiba.com.au/support/warranty/extended/FAQ

• Need some advice on the new computer from HP.

  I bought a new HP computer and it shipped just yesterday and delivery date is Thursday (12th).  I am new to HP computers, my other 2 desktops are Dell and Toshiba laptop of my wife. Laptop is Win 7 and desktop computers are Win XP. The most recent Win XP is:

  Windows XP Professional SP3 32-bit
  Intel Core 2 CPU 6300 @ 1.86GHz
  4 GB of Ram.

  Don't laugh, my other Dell XP desktop computer is simple core!  Laughing out loud

  These 2 computers will retire after I receive and configure the HP computer:

  HP Pavilion HPE h8 desktop PC - 1360t
  Windows 7 Home Premium 64
  3rd generation Intel Core i7-3770 to processor quad-core [3.4 GHz, 8 MB of shared cache]
  10GB DDR3 1333 MHz SDRAM [3 DIMMS]
  SATA 1 TB hard drive 7200 RPM.

  Do you think I'll note and difference? (I'm kidding) Laughing out loud

  1. is there a procedure for the implementation of the new computer? I'll be the only one to use it.

  2. I also want to do a recovery disk. Can I do this after having my computer account?

  3. the computer come with Service Pack 1 installed?

  HP Pavilion HPE h8 desktop PC - 1360t
  Win 7 x 64 ~ ~ SP1, IE11 ~ ~ FF i7 3770 3.40 GHz ~ 10 GB Ram ~ NIS 2014

  Congratulations for the excellent choice.

  1. is there a procedure for the implementation of the new computer? I'll be the only one to use it.

  With your experience, you probably won't have a problem. I strongly support you haven't set a password on it.

  You can always add a password later.

  2. I also want to do a recovery disk. Can I do this after having my computer account?

  Configuration of the computer and do what is required to complete the user account. It is advisable to only use DVD + R media. You will probably need 3-4 DVD + R and the usual CD - R disc repair system.

  3. the computer come with Service Pack 1 installed? This date should be. There will be updates.

• Need some advice for storage of laboratory work station.

  Hello community,

  I was student and new to ESXi. I would like to build a cluster VM storage initially for HA and FT, but my SSD is maximum and would like to make my external storage using my other PC small box. No I have no room for another player.

  This is my configuration of lab.

  .

  A DS81 shuttle that has my Workstation11 Server 2008 running for the DNS, AD and two ESXI 6.0. on the third host, I would install vCenter 6.0 as one. EGGS only because its been hell Server installation.

  Second Shuttle DS81 (do not use) with the same characteristics. They all have two 100 SSD with 16 GB GB memory with 2 NICs with opassive not to switch between the two and using bridge vmNet0.

  What is your recommendation on the creation of storage using the extra white box? or I also a 16 GB in PC SD card I would use it as a storage device. Can I do it using my computer?

  Thanks in advance guys.

  Hello

  The extra PC for use as additional storage space will work fine.

  You can do this through software like freeNAS or just install linux and set up an NFS share.

  I do not recommend the use of the SD card which do not work very well, these cards are all way too slow.

  Even the fastest have too much latency and will drive you up a wall.

  An SD card allows you to start an operating system like vSphere, but you don't want to host VMs on them.

  --

  Wil

• Need advice for the new graphics card

  I have a desktop HP Pavilion a6610t with HP w1907 monitors. Windows 7 32 bit.  I want to upgrade to a graphics card that supports two monitors.  Games isn't a factor, but I'd like a card that does not become the neck of the bottle when you surf or work remotely.  I have a PCIe - x 16 available slot.  My price range is around us $100.

  What should I look for another as the PCIe - x 16 and the ability to support two monitors when you shop for a graphics card?  I think the AMD Radeon HD 6570 is a good starting point.  What do you think?

  Any information will be appreciated.

  Here are the specifications and the configurable option for your desktop HP Pavilion a6610t CTO. According to specifications, your system came from the factory with a 250 watt power supply. Most retail graphics cards require a power supply minimum system assessment of 300 watts or greater. The Radeon HD 6570 you noted requires a 400 watt or a bigger power supply. The CX500, CX600 Corsair are highly recommended, are favorites of the forum and are known to adapt to most cases of HP. For useful information on the selection of a graphics card that fits your computer and meets your needs, read Guide of Big_Dave of a discrete video card selection .

  Frank

• Need some advice for my little shoot in A.S. 2.0 script

  Dear wizzards Flash,
  After spending many hours on this script, because I'm not a wizzard (again :) I almost give up.)
  
  I created 3 objects.
  The target (you can move it up and down)
  The shooter (I flip that onEnterFrame in degrees of right to achieve the target);
  The balls (bullets) that hit the target in the middle.
  
  As you can see it almost works:
  my example
  
  The problems I have is:
  When you drag the target from top to down fast... the balls also go up and down and
  do not follow the path in a linear way.
  Whe the degree is zero... the ball speed is too fast... the speed of the ball must be constant.
  
  Now I have a lot of mathematical drawings on my paper and use my calculator a lot, but maybe
  someone has already done this before and would like to share the access to its source code. At least I have tried myself :)
  
  My source code is:
  
  
  
  
  
  

  1. the starting point depends on your point of alignment. your hoek reg TP must be where you want to ball start.

  2. who should be:

  MC = balA [i];
  balA.splice (i, 1);
  mc.removeMovieClip ();

• Some advice needed for the client that runs on Windows xp

  Hi all
  
  I'm looking for some advice for a project, I am working currently on, what I need to do is to build a client that will run on windows as a service/calendar is connected to a local instance of the database to collect data from all tables of maximum size of the data would be 256 kb and analyze to a web service. Customers are located behind the corporate firewall to which I have no access. Could someone advise me on what type of client, I need to develop to achieve this goal.
  
  concerning Martyn

  Martyn says:
  If I created a jar file, would I be able to run it in the background say once a week

  Yes.

  Once I've collected data through JDBC, I thought that analysis of the data to a web service

  What is 'analysis of the data to a web service? If you mean send data using web services, then Yes, you can do.

• The upgrade of my iMac for the new year: advice requested

  I intend to buy a '5 K' 27"iMac very soon in the new year. My current iMac is great, but the new iMacs can support 64 GB of RAM (from trust OWC), and mine is only 32 GB, end of story. I really need the impetus of extra RAM for my work. Right now, I'm still on 10.8.5, as are the many benefits I know. But I simply must have the biggest capacity of RAM. My concern is the operating system. Can someone please give me some advice on how I should migrate my relatively valuable software without problem?

  In the past, I managed to carry around with only a few bumps, but I realize the Mavericks realize / El Capitan are slightly different beasts OS to the Lion. So, in general, I'm in Logic Pro (of course!), with Kontakt as my pillar. In addition, plenty of third-party plugins and related software that could be a minefield. What would be my best strategy for getting up and running relatively smoothly? I ask this, because my time is at a premium, it is never really a period I would call convenient to do this, as I'm sure that many pros will understand.

  I want to just be prepared for eventualities, that perhaps the community already have experience. Sorry, I really do not have to trawl all the threads though. He is currently a deadline after another, but I don't know that I can migrate successfully if I have good info on the new OS.

  Really appreciate any help on this! Thank you...

  Might help to know what equipment will be attached to the new beast. There has been some problems with El Crapitan from the beginning, but I think that most of them have been flattened, even if Apple OS latest have more load. Apple is trying to get os x and iOS under development platform even if there were a few bumps. Just make sure that your plugin is model compatible as well as all third-party drivers.  Bloom time is is more directly supported.

  These can help.

  Information on the compatibility of 10.11 El Capitan - Important.

  El Capitan 10.11.1 compatibility information

  Info: Working with 10,11 El Capitan

• I want to install windows on my new macbook and I need to create a partition. I have not now what size to make my windows partition. Can someone give me some advice?

  I want to install windows on my new macbook and I need to create a partition. I have not now what size to make my windows partition. Can someone give me some advice?

  1. in what year is your Mac?

  2. What is the size of your storage internal?

  3. what version of Windows?

  4 as a general rule 60-100 GB for W8 + / W10 is recommended. You can also create a minimum Windows (30-50 GB) and use an external drive D: for documents applications for portability.

• Can you please give some advice on the ToolTip used in the new packaged applications

  Hello
  I use apex 4.1 theme 23.
  I would use the ToolTip used in the new packaged app.
  Can you please give some advice or the "Details" on ToolTip, used in the new packaged applications. for example: go live checklist request.
  Once we fly over "Check list items" region. We get the tootip.
  
  1. how to find the class "detailedStatusList".
  2. how to find "detailedStatusListToolTip();" JavaScript function used in "execute when Page Loads.
  3. is there a tool to generate the source in the region to "check list items.
  
  I don't know if there are more, I need to know...
  
  * the tooltip plugin isn't solid...
  
  Kind regards
  Water

  Good morning, water,

  My goal is to use it in IR for the column notes. I can't show all the notes on the report. so I use RPAD to show only the first words. and the rest should be available by using the ToolTip.

  Fact :D

  You need to use SUBSTR to restrict the notes to a few words, not RPAD.

• I changed the IR query as follows...

  select
  Deptno,
  Dname,
  Loc,
  substr(notes,1,25) || '<div class="long-notes" style="display:none;">'||notes||'