Some handles Bezier figure is not in the path (CS6)

Similar Questions

• For some reason that I do not see the developer at the bottom of the page links (Page Edit, Session, debug, etc.) How can I fix? Request Express 4.2.2.00.11

  For some reason that I do not see the developer at the bottom of the page links (Page Edit, Session, debug, etc.) How can I fix? Request Express 4.2.2.00.11

  I hope someone could help me!

  Thank you

  -Fury

  It could be caused by a known bug...

  Oracle Application Express 4.2.2 - known issues

  See: 16769040

  Concerning

• Art brush not following the path

  I have an art brush I created to achieve an offset on an open path.  In some place the brush does not follow the path.  I have attached a picture.  The thin pink line is the actual path.  The thicker pink line is the art brush I created for the offset.  You can see at the top of the image of what the style is supposed to look like.  Once the road starts to bend down, the path and the brush out of alignment.  I tried to add points, which works on other types of brushes, but doesn't seem to work on artistic forms.

  Can any ideas on how I fix?  Thank you.

  

  It sounds like you did not have a suitable model brush. You must be particularly careful. Basically, it should look like this. I left the invisible lines in it. You don't need them, but you need the invisible rectanlge around each element (emphasis on purple items):

  

• Retrieving error - could not find the path of the image... M:/RecoveryImage/install.wim

  So, I went out and bought the USB on the gateway site to restore this laptop again and when I tried to do, he says recovery failed - could not find the path of the image M:/RecoveryImage/install.wim.

  I contacted support and they issued me a replacement USB drive, I get the same failure.

  I diagnosed the HARD drive and it passes.  I used diskpart to 'clean up' the disk drive HARD all nothing doesn't.

  [Under the direction of privacy] order number

  What gives?

  Acupro1,

  I you sent a PM with respect to research purposes.

• Mac Illustrator CC 2015 bug: option-a path to reproduce moving often does not release the path when the mouse button is released

  Mac Illustrator CC 2015 bug: option-a path to reproduce moving often does not release the path when the mouse button is released

  Delete my preferences file and restart the machine seem to have solved that problem.

• Error during set up, can not find the path to internet

  At the end of the implementation for Photoshop, I get an error message that says that I can not find the path to the internet.  I changed my default browser to Internet Explorer for Chrome on the new PC, I bought today.  I want to finish the game!  Help, please.

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  Mylenium

• WARNING: the data resetlogs_id is not on the path valid incarnation

  I have a primary database (the day before is deleted for now, because I had a few questions), the DRC log file information below, shows how to fix these?
  
  
  WARNING: the given resetlogs_id 780690997 is not on the path valid incarnation.
  16/04/2012 12:35:26
  
  'drcrwxcty1.log' 289909L, 19778849C 289828,1 99%

  RFS [106]: network Possible disconnect with primary database

  It is matter with remote archiving and main problem with networking.
  can you check how is the speed of bandwidth?

  Also check how much behind archives in standby mode. If very less try to manually copy and perform a recovery.

• When you visit some Web sites, Firefox does not display the topic sites and sometimes the text correctly. It seems broken and unreadable.

  I reinstalled a new version of Firefox and set all of the default settings, but the problem still persists. Running Windows 7 and I have tried several different browsers (IE, Safari, Chrome and Opera) and all seem to work well. Only problem is with Firefox. The only time it works great is when I do not allow the site to use their own fonts. For any help or suggestion would be greatly appreciated.

  These sites use the Helvetica font?

  There has been problems reported with older versions of the Helvetica font bitmap or Geneva or fonts (bitmap) that Firefox cannot display in this size.
  
  Firefox cannot display some old bitmap fonts in a larger size gibberish and display instead.
  
  You can test in zoom out (view > Zoom > Zoom out, Ctrl-) to make the text smaller.

  Uninstall (remove) all variants of this not working do Firefox, use another font or see if you can find a version of real type that does not show the problem.

  There was also the fonts with a reported Chinese name who self-identify as Helvetica, in order to check that as well.

  See also /tiki - view_forum_thread.php? idforum = 1...

• Text-Animation: my text is under the path and not on the path (for some reason any)

  Hello

  I use after effects CC (12.2.1) on Mac Book Pro El Capitan 2013.

  I'm not able to put text on a path for animating text. It will always appear in the path. I asked different people and I never received a response, because it seems I'm the only person who has this problem.  I don't need to write much more, because it's really as simple as that. My screenshot will show my dilemma and I have not made any changes to attributes.

  Please take a look and hopefully help me with this.

  (larger image here: http://postimg.org/image/x4xj8duqz/)

  

  Anyway, I know now what happened. If you have a text in a bounding box, it aligns in the path. I discovered this quite by accident.

  Thanks for the help.

  See you soon.

• Microsoft Visual C ++ Runtime Error - can not see the path of the file.

  When I get the runtime at startup error, I don't see the destination of the file. It is very annoying that I can not see the program that gives me the problem.

  All it says, this is:

  Runtime error!

  Program: C:\Program F...

  How can I extend the above so I can see the path of the actual file?

  Also going to go for a 2 for 1 here...

  Immediately after the closure of the runtime error box, I get the message that search settings stopped working.  I close who and everything is fine until I reboot (by making the error happen) but I'd rather not have the problem in the first place.  I run Windows 7 Ultimate.

  Error information:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: SearchSettings.exe
  Application version: 4.5.0.2
  Application timestamp: 4e04ab86
  Fault Module name: MSVCR90.dll
  Fault Module Version: 9.0.30729.4940
  Timestamp of Module error: 4ca2ef57
  Exception code: 40000015
  Exception offset: 0005beae
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Information additional 1:9956
  More information 2: 995611374799875ff43c42d4b1b84d70
  3 more information: 3d4b
  Additional information 4: 3d4b4db0455ea2295d172b959897673c

  Maybe just download a new MSVCR90.dll but I would like to hear what you have to say.

  Hello

  ·         Did you the latest changes on the computer?

  We must first identify to identify the program that is causing startup problems.

  Step 1:

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode.

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  Step 2:

   

   

  I suggest that you put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• After import of archive site Internet 10g, resources are not in the path

  Hi all

  I try to import the example WCM site in GR 11, 1 newly installed material (11.1.1.7.0) using site studio backup and restore utility.

  http://www.Oracle.com/technetwork/middleware/WebCenter/content/WCM-sample-site-131561.zip

  Important message of the site, when I access the pages I could see that images and other resources are not rendered as paths of the images could not be resolved.

  For example: the image of the logo. site is looking for the image at the following location.

  /CS/groups/public/documents/wcmwebasset/oracle_logo_15h.PNG

  Where as post import this image lies inside

  cs\weblayout\groups\public\documents\wcmwebasset\x2xv\z29f\~edisp\oracle_logo_15h.PNG

  How can we come to these problems?

  To give you a bigger picture, I'm working on a CEP to migrate a site of 10g and 11g. What is the right strategy to adopt. Right now I'm doing the following.

  (1) install 11 g R1 install.

  (2) to use folder_g as a network interface.

  (2) export 10 g Web site (I'm sure this could be split into several stages)

  3) import in 11 g

  (5) use the migration utility to move a folder interface folder_g to setting records.

  I wasn't going to upgrade inplace, mainly because the customer wants to retain the 10g install for some time yet and didn't want to corrupt the existing installation.

  I appreciate any help in this regard.

  Thanks in advance,

  Steven K.

  Hi stephanie,.

  You see the new path for the files due to the dispersion principle UCM 11 g from rule (which by default is set to the file store provider). This behavior can be changed by the following steps:

  1. check what the default rule, you must Access the FileStorage field select Administration - Applets - Configuration Manager admin - modify and check what is the default setting.

  It should be DispByContentId

  2. remove the rule of dispersion of the weblayout / web / vault of paths of Administration - suppliers - bank file by default - - Edit.

  3. update - updated

  Before you start with the above points, you must run an archive server full export target (11 g) and select the option "remove content after successful export. This will delete the server and it will be a perfectly clean instance.

  Then after changes in store files, server restarts, provider import archive created and then, with the same path as seen in the instance of 10g.

  Positions of reference:

  https://forums.Oracle.com/message/10058823

  https://blogs.Oracle.com/ecmarch/entry/working_with_the_new_fsp_dispe

  https://blogs.Oracle.com/ecmarch/entry/when_is_the_default_storage

  I hope this helps.

  Thank you

  Srinath

• Lightroom CC do not remember the path of import file.

  Hello

  Since the update of Lightroom CC this week he remembers most the path of the file in the folder on my computer where to store my RAW files for import. Import this way whenever I have I have to run lightroom in the folder which is a royal pain as RAW folder is buried deep in other folders. I have verified that all import options, but can't find anything that is changed, so don't understand why he doesn't remember the path of the file. Everyone found it and not how to fix it?

  TIA.

  This has been discussed previously. Adobe is apparently aware of the problem, and if all goes well it will be corrected in a future update.

• Adding new point to existing path which is NOT on the path

  I need to add a new point to a path that is not on the way, that I am trying to add.  In other words, I am trying to extend a line in a given direction, do not add a new point in the middle of an existing line.  I created the path using the pen tool, then I've done something else with another tool and then returned on my road.  I add_ _can a new point using the pen to click somewhere on the existing path, but this isn't what I want.  I want to add a new point on the way to extend the line (I use STROKE with no fill to create a line) in a certain direction.  No combination of keys I've tried seems to allow After Effects insists on creating a new, separate, Lane which is not what I need.  Any help appreciated, thx!

  1. Select the layer with the open path
  2. Select the tool pen (keyboard shortcut g)
  3. You hover over the path the cursor turns into a small black arrow
  4. Click on the vertex at each end of your open path
  5. The cursor now changes behind the pen tool
  6. Click anywhere to add another point on the path

  The trick is to not having all vertices in the path selected when you start

• Why not choose the path of the index.

  Hi Forum,
  
  Select * from version $ v
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
  PL/SQL Release 11.2.0.2.0 - Production
  CORE Production 11.2.0.2.0
  AMT for Linux: Version 11.2.0.2.0 - Production
  NLSRTL Version 11.2.0.2.0 - Production
  
  
  Why optimzer is not to select the path index for query below.
  I have anlyzed in many ways but there is something missing somewhere, it seems. could you help me please...
  
  
  create the table test_index_count5 (number);
  
  Start
  because me 1.100000 loop
  insert into test_index_count5 values (2);
  end loop;
  because loop me in 1.2
  insert into test_index_count5 values (3);
  end loop;
  commit;
  end;
  
  create index ind_a_tic5 on TEST_INDEX_COUNT5 (a)
  
  Select one, count (1) test_index_count5 by a group
  2 100000
  3 2
  
  exec DBMS_STATS.gather_table_stats ('system', tabname = > 'TEST_INDEX_COUNT5', cascade = > true)
  
  Select * from test_index_count5 where a = 3;
  3
  3
  
  Select the operation, optimizer, cost, cardinality, bytes, filter_predicates, projection of v$ sql_plan where sql_id = "1xqk2b2k2z8un."
  
  ALL_ROWS 44 SELECT STATEMENT
  ACCESS 44 50001 150003 TABLE 'A' = 3 'A' [NO.22]
  
  
  Select * from dba_indexes where table_name = 'TEST_INDEX_COUNT5 '.
  
  blocks of sheet - 196
  data AVG by key - 76 blocks
  CF - 152
  Num_Rows - 100002
  
  
  Select * from dba_segments where nom_segment = 'TEST_INDEX_COUNT5. '
  blocks - 256 = 17 * 8
  extents - 17
  
  Select * from dba_extents where nom_segment = 'TEST_INDEX_COUNT5' and block_id not in
  (select block_id from dba_free_space where nom_segment = "TEST_INDEX_COUNT5") - 17
  
  
  
  explain plan for select * from test_index_count5 where a = 3;
  Select * from plan_table
  SELECT STATEMENT
  FULL SYSTEM TEST_INDEX_COUNT5 ACCESS TABLE
  
  Thank you
  Mahesh
  
  Published by: Mahesh on 28 Sep 2011 17:56

  Hello Manu,

  one thing resembling trinkets that you use 'system' in your call to exec dbms_stats.

  Environment:

  select * from v$version;
  
  BANNER
  ------------------------------------------------------------------------------------------------------------------
  Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production
  PL/SQL Release 11.2.0.2.0 - Production
  CORE    11.2.0.2.0      Production
  TNS for Linux: Version 11.2.0.2.0 - Production
  NLSRTL Version 11.2.0.2.0 - Production
  
  5 rows selected.
  

  That's what I did:

  CREATE TABLE test_index_count5
    (
      a NUMBER
    );
  
  BEGIN
    FOR i IN 1..100000
    LOOP
       INSERT
         INTO test_index_count5 VALUES
        (
          2
        );
    END LOOP;
  
    FOR i IN 1..2
    LOOP
       INSERT
         INTO test_index_count5 VALUES
        (
          3
        );
    END LOOP;
    COMMIT;
  END;
  /
  
   CREATE INDEX ind_a_tic5 ON TEST_INDEX_COUNT5
    (
      A
    );
  
  exec dbms_stats.gather_table_stats(user,tabname=>'TEST_INDEX_COUNT5',cascade=>true);
  
   SELECT *
     FROM test_index_count5
    WHERE a=3;
  

  That's what I get:

  Connected to:
  Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production
  
  TEST@oraxe_11g> drop table test_index_count5 purge;
  drop table test_index_count5 purge
             *
  ERROR at line 1:
  ORA-00942: table or view does not exist
  
  TEST@oraxe_11g> quit
  Disconnected from Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production
  dcl@metaws01:/programs/metasyst/scripts/migration_11g$ sqlplus test/test@oraxe_11g @test.sql 
  
  SQL*Plus: Release 10.2.0.1.0 - Production on Wed Sep 28 15:19:27 2011
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  Connected to:
  Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production
  
  Table created.
  
  PL/SQL procedure successfully completed.
  
  Index created.
  
  PL/SQL procedure successfully completed.
  
           A
  ----------
           3
           3
  
  2 rows selected.
  
  Execution Plan
  ----------------------------------------------------------
  Plan hash value: 3375661399
  
  -------------------------------------------------------------------------------
  | Id  | Operation        | Name       | Rows  | Bytes | Cost (%CPU)| Time     |
  -------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |            | 50001 |   146K|    99   (2)| 00:00:01 |
  |*  1 |  INDEX RANGE SCAN| IND_A_TIC5 | 50001 |   146K|    99   (2)| 00:00:01 |
  -------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     1 - access("A"=3)
  
  Statistics
  ----------------------------------------------------------
            1  recursive calls
            0  db block gets
            3  consistent gets
            0  physical reads
            0  redo size
          354  bytes sent via SQL*Net to client
          337  bytes received via SQL*Net from client
            2  SQL*Net roundtrips to/from client
            0  sorts (memory)
            0  sorts (disk)
            2  rows processed
  
  Disconnected from Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production
  

  C.

• Compaq Presario V6120US: Wireless network CARD not FIGURENT DO NOT IN the DEVICES MANAGER

  I have a compaq presario v6120us I can't get WiFi to work on. I tried to switch off wi - fi on and outside, I was going to try to go into the bios and put it on there, but there is no control for wi - fi in bios. When I try to find it in Device Manager, I see not listed. But I know there's a wi - fi connection because there the card inside, more there's a switch on to activate the wi fi. I consider me be advanced when it comes to computer repair, but I'm running out of ideas, and I would be very happy for any help, thoughts, or ideas as to what this might be.

  Thank you very sincerely,.

  Dennis

  Hi, Dennis:

  The motherboard in your model had issues due to run hot.

  One of the victims is that the power of the slot that plugs into the wireless card is lost.

  That's why the wireless card dropped out of sight.

  It probably is about your present dilemma.

  That's happened a lot with the dv6000/dv9000 motherboards that used the same chipset nvidia and AMD processor has your laptop.