Some play games, some don't

Similar Questions

• gamepad work on some games, but some don't. How to fix? where can I find the driver?

  gamepad work on some games, but some don't. How to fix? where can I find the driver? I want it to work like a xbox 360 gamepad, mines look like a playstation controller 2, its a pc gamepad heres link http://www.amazon.com/gp/product/B00IYEZUD6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 sqdeal I want to play a game called microvolts, but game do not see the gamepad even when you use the game software xpadder. S W A D do not work. How to make it work?

  Yes, thanks (NOT) to monopoly$ oft, most default games to the XBOX controllers these days.

  -There were several updates of XInput , who fixes for controllers that were compatible with

  XBOX several years ago.

  I do not exactly remember, but they are either through Windows updates 'important' updates, or

  the DirectX Web Installer, updater DX-

  Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

  -The game should not have to recognize the controller. If the profiling software that comes

  That's all good it will emulate a keyboard.

  If the profiling software that comes with your controller cannot create a profile for the game

  which allows the stick or d - pad to function as the WSAD keys, you will need to ask at the support

  site for the mfg of the controller.

  Or, if you're lucky, here, someone can have experience with this brand controller.

  I had no problem in WSAD orders for games with my Logitech "dual action".

  the game controller software.

  I think that the new Logitech controllers, for example. - F310, identify the buttons and sticks of the same

  as an XBOX controller and can play most of the games which by default XBOX without using third-party software.

  .

• PC freezes when playing games and do some tests?

  Hello guys, I built a pc and I think everything works, however, whenever I do a:

  -Windows Experience Index Test
  -Play games
  -Make a simple Stress test

  It makes my computer freezes after a few minutes.

  What can I do to fix this?

  I checked the logs, and they had so many errors and warnings.

  Hi Dan,.

  1. What is the configuration of your computer?

  2. which antivirus app do you use?

  I suggest to follow the steps below and we update on the State of the question.

  Method 1: run the Performance Troubleshooter.
  Refer to this link: http://windows.microsoft.com/en-IN/windows7/Open-the-Performance-troubleshooter

  Method 2: Optimize Windows 7 for better performance.

  Refer to this link: http://windows.microsoft.com/en-us/windows7/Optimize-Windows-7-for-better-performance

  
  

  CHKDSK WARNING: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  
  

  Anti Virus WARNING: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Reply to this post with the State, and we will be happy to help you further.

• Some live tiles updated, some don't, despite being 'on '.

  New Acer R3 - 131T W10. Some live tiles updated, some don't. When I right click those that don't update, the menu shows tour live tile, indicating that it is on. How to update?

  Thanks for your reply.

  This link indicates that the application is for Windows 8, Windows 10 not and will not work with Windows 10. However, there was a link on this page for a windows 10 help page.  This help page has proposed upgrading Windows 10. It seems that version factory was quite out of date because many updates have been installed with several reboots - in fact I left it to run a night or more to install all. The live tiles all work fine now, so it was simply a matter of installing all of the updates.

• Vista crashes when I watch DVD videos or online and play solitaire but don't no where to play games like mass effect?

  Hello!
  I have ATI Radeon HD 3400 Series (2 GB of Ram, Pentium R Dual Core CPU E5200 @ 2.5GHz, Vista SP2, 32-bit operating system. I don't know if it's important). Lately my computer has been crashing when I watch videos or play a loner, but not every time except solitaire.  It freezes, green squares are everywhere, then it goes black and turns.  I've updated just as much as I can, I cleaned everything as much as I can. It does not crash when I play games suitable as mass effect, and that seems to work very well.

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  OS version: 6.0.6002.2.2.0.768.2
  Locale ID: 2057

  Files helping to describe the problem
  WD-20121231 - 1008.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 117
  BCP1: 87BB1510
  BCP2: 8AEB3D68
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Don't you think it's because I have little Ram? I looked up on this subject, most people just say to make things of course are up to date, but I'm OCD to make things of course are updated now, and it didn't help a bit. IM nervous to uninstall anything.  Ive forgot what it's called, but I did check to see if the files have been corrupted. Above all I do not understand why it does.  Please could you help. I know nothing about computers and I don't want to make things worse.  Evil appreciate any help, thanks: o)

  VIDEO_TDR_TIMEOUT_DETECTED

  Bug VIDEO_TDR_TIMEOUT_DETECTED control has a value of 0 x 00000117. This indicates that the display driver failed in a timely fashion.

  Parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The pointer to the context internal TDR recovery, if they are available.
  2	A pointer to the loaded device driver module (for example, the owner tag).
  3	The secondary key of driver-specific bucketing.
  4	Reserved.

  It's either a fault of your video card or faulty drivers. Try to update your drivers to

  http://support.AMD.com/us/pages/drivers.aspx

• TextLayoutFormat properties: Some work, some don't

  I worked with the TLF for the last week and a half. It went pretty Rocky for different version differences. I tried, Flex 3 beta 2 SDK (4.0.0.10485) and constructions later to incorporate fonts without success even with the 'SBB' changed to "embedAsCFF" the font swf would always fail to integrate properly. I even tried the same process in Flash Builder 4 with no luck.

  Finally, I came to an embed of working / loading system.
  
  To embed the fonts I use Flex 3 with the Adobe MAX 2008 SDK (4.0.0.4021) with this method:

  [Embed (source = "fonts/AdobeHebrew-Regular", mimeType = "application/x-font", fontFamily = "_AdobeHebrewEmbeddedFont", SBB = "true")]
  public static var _AdobeHebrewEmbeddedFont: Class;

  With respect to the TLF, I have been using the swc included in Adobe Flash Builder Plugin Beta 2 build with great success. There are a few things that do not seem to work, and I was wondering if I can get feedback from other people who may run into the same issues. Maybe I should use a more recent version of the TLF as nocturnal compilations?

  It's pretty much just a release of all the methods I tested in the TextLayoutFormat class. Some work, some don't. Maybe some are dependent on each other? Any ideas would be greatly appreciated. Thanks in advance.

  Steve

  Format layout
  var objLayoutFormat:TextLayoutFormat = new TextLayoutFormat();
  
  objLayoutFormat.direction = Direction.RTL; works
  
  objLayoutFormat.paddingLeft = 15; works
  objLayoutFormat.paddingTop = 15; works
  objLayoutFormat.paddingRight = 15; works
  objLayoutFormat.paddingBottom = 15; works
  
  objLayoutFormat.textIndent = 2; works
  objLayoutFormat.textDecoration = TextDecoration.NONE; works
  objLayoutFormat.textRotation = TextRotation.ROTATE_180; works
  objLayoutFormat.textAlign = TextAlign.CENTER; works
  objLayoutFormat.textAlignLast = TextAlign.JUSTIFY; Nope
  objLayoutFormat.textAlpha = 1; works
  
  objLayoutFormat.fontFamily = "_AdobeHebrewEmbeddedFont"; works
  objLayoutFormat.fontLookup = FontLookup.EMBEDDED_CFF; works
  objLayoutFormat.fontSize = 20; works
  objLayoutFormat.fontStyle = FontPosture.NORMAL; Works on the assumption that the police take care
  objLayoutFormat.fontWeight = FontWeight.NORMAL; Works on the assumption that the police take care
  objLayoutFormat.renderingMode = RenderingMode.CFF; works
  objLayoutFormat.cffHinting = CFFHinting.HORIZONTAL_STEM; works
  
  objLayoutFormat.color = 0xFFFFFF; works
  objLayoutFormat.backgroundAlpha = 1; Nope
  objLayoutFormat.backgroundColor = 0 x 000000; Nope
  
  objLayoutFormat.paragraphStartIndent = 10; works
  objLayoutFormat.paragraphEndIndent = 50; works
  objLayoutFormat.paragraphSpaceBefore = 20; Nope
  objLayoutFormat.paragraphSpaceAfter = 100; Nope
  objLayoutFormat.justificationRule = JustificationRule.SPACE; Nope
  objLayoutFormat.breakOpportunity = BreakOpportunity.ANY; works
  
  objLayoutFormat.kerning = Kerning.AUTO; Works on the assumption that the police have the kerning table
  objLayoutFormat.trackingRight = 2; works
  objLayoutFormat.trackingLeft = 2; works
  objLayoutFormat.leadingModel = LeadingModel.AUTO; works
  objLayoutFormat.whiteSpaceCollapse = WhiteSpaceCollapse.COLLAPSE; Nope
  
  objLayoutFormat.digitCase = DigitCase.DEFAULT; Works by assuming that the police has the ability
  objLayoutFormat.digitWidth = DigitWidth.TABULAR; works
  objLayoutFormat.ligatureLevel = LigatureLevel.COMMON;
  objLayoutFormat.locale = 'en ';
  objLayoutFormat.typographicCase = TLFTypographicCase.LOWERCASE; works
  objLayoutFormat.justificationStyle
  objLayoutFormat.textJustify
  objLayoutFormat.columnCount
  objLayoutFormat.columnGap = 60; works
  objLayoutFormat.columnWidth = 40; works
  
  objLayoutFormat.lineHeight = "80%"; works
  objLayoutFormat.lineBreak = LineBreak.TO_FIT; works
  objLayoutFormat.lineThrough = true; works
  
  objLayoutFormat.blockProgression = BlockProgression.TB; Nope
  
  objLayoutFormat.verticalAlign = VerticalAlign.BOTTOM; works
  objLayoutFormat.firstBaselineOffset = BaselineOffset.LINE_HEIGHT; works
  objLayoutFormat.alignmentBaseline = TextBaseline.USE_DOMINANT_BASELINE; works
  objLayoutFormat.dominantBaseline = TextBaseline.IDEOGRAPHIC_BOTTOM; works
  objLayoutFormat.baselineShift = 20; works

  Your code does not indicate what type of item FlowElement you're applying the TextLayoutFormat, or what text you are made. For example, backgroundColor inherits no element FlowElement from parent to child FlowElement element and must therefore be applied to a SpanElement rather than a TextFlow.

  Gordon Smith

  Adobe Flex SDK team

• Portege A100 - need new driver for graphics card to play games

  I own a Portege A100 and I need to update the graphics controller to play games.

  My problem is I went to the Download Center and the latest driver is currently installed in my notebook.
  I got this game running before but had my cell reprogrammed and don't remember how to operate.

  Help, please!

  Hmmmm... to be honest Portege is not portable for the games. Maybe for playing chess, but for some graphics intensive games is certainly bad laptop.

  Anyway, the question is what you want to do.
  Do you want to play some games or simply to grow old (already working) game to run again? Or maybe the two options?

• Satellite Pro M70 overheating when playing games or watching DVDs

  Hello world

  my laptop (Satellite Pro M70) overheating regularly, especially when playing games or watching DVDs.
  Initially the cooling gets really hard, then the laptop would become hot, and shortly after that it stops completely. I ran it about 50% cpu power (DVD mode) for some time, which helps a little, but makes it much slower games.

  I do not know whence this problem, you have any ideas what I could do?

  Don't know if it's important, my graphics chip is the ATI Mobility Radeon X 700.

  Thanks in advance

  > My laptop (Satellite Pro M70) is overheating regularly himself, especially when playing games or watching DVDs.
  Still is it playing games and watching DVD movies to emphasize material for portable computers.
  Devices such as the CPU and GPU run with maximum efficiency and produce a lot of heat.
  This could lead to problems of overheating, especially if the cooling modules n t work properly.

  > I do not know whence this problem; you have any ideas what I could do?
  I think that the cooling modules don't cool the laptop properly because fans could not run with maximum efficiency because of the dust and debris.

  The same thing happened to me. I just cleaned the vents using a jet of compressed air. This jet of compressed air can be ordered from different computer resellers and it s a professional tool to perform this cleanup.

  I think you should test this.

  Good luck

• Satellite A500-1 - stops when I play games

  Hello!

  I'm having some serious heat and fan with my Toshiba laptop problems. First data:
  The laptop is on and a half a year old. His turning point under Windows 7 64-bit. I cleaned it about 2 days ago and many times before (dust in the fan cooling etc..). Toshiba drivers are up-to-date and I already use a cooling block.

  When I play games sometimes, my laptop suddenly stops immediately, due to overheating problems. The strange thing is that, when this happens, the fan is not nearly at maximum speed. When I restart the computer after such a judgment, the fan fire suddenly at maximum speed, until the laptop even once cooled.

  I started watching my CPU and GPU, and my fan speed temperatures while playing games, and I recognized, that the temperatures increase normally, but most of the time the fan remains at its current speed. Even if Toshiba PC Health Monitor shows, that the fan speed goes from 40% to 90% the fan is actually at a low speed.

  From time to time it happens that the fan suddenly triggers her speed, but it lowers again after 1 or 2 minutes, while the indicated fan speed remains constantly at 90%. Somehow, I'd understand if the laptop would be closed despite the entirely fan running, but insufficient fan controlling? Come on Toshiba.

  In addition this problem worsens every day. Anyone who has any suggestions to solve this problem?

  Greetings
  Thomas?

  Hey Buddy,

  Interesting story, but how do I clean the fan exactly? Did you use a jet of compressed air to blow the dust from the cooling fans?
  Another reason could be the display driver itself. As you can see in other threads if you are using a Toshiba display driver they might cause of overheating because they don t have a protection against overheating and other thermal management. So it is important to use only Toshiba display drivers.

  What version of BIOS you have installed right now?

  AFAIK BIOS version latest contains another management fan so I'll try to update. You can download the latest version here:
  http://EU.computers.Toshiba-Europe.com > support & downloads

  In general the fan will be controlled automatically and you can t he control you. Just make sure you use power plan to high performance for the games.

• My guard computer shut down unexpectedly when I play games.

  My guard computer shut down unexpectedly when I play games. Now it is not always the case, just sometimes. The other day I was playing Sims 3 all day, literally, with the graphics settings maxed out and had no problem. The next day, he would crash as soon as it finished loading, even with the graphics settings at the bottom. Today, it was working fine this morning and now it crashes again. I had the same problem on and off with other games as well, Halo 2, Kings Bounty, UT 3. Here is my system:

  OS - Vista Ultimate 32 bit
  Processor: Core 2 Quad Q9400 @ 2 .66GHz
  RAM - 4 x 1 GB PC6400 DDR2/800
  MB - MSI P7N SLI - FI
  HARD drive - 150 GB x 2 (Raid 0) Raptor 10 k RPM
  PSU - 1000 watts
  GPU - NVidia GeForce 9800GT 1 GB (x 2 in SLI)

  And the error I get from Event Viewer:

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  I got the error almost everyday since I got the computer, about 10 months ago, but it only blocks the computer if I play a game. I tried the 'fix' that removes the WMI event viewer 10 error, but everything done was make sure the error is not logged. I also tried another fix I found me delete the files in the repository, but that no longer works. I also run scans of complete system of virus/malware Spybot Search & Destroy and AVG 8 and verified the updated driver for my hardware. I also ran diagnostic tool memory. Who has good/clean/current. Can it be fixed or what I have to reinstall the OS?

  Hi JerHekSr,

  Thank you for using answers Forum.

  The first thing that comes to mind would be to check the motherboard manufacturer for an update of the firmware/BIOS.

  The error message mentions "loadpercentage > 99' which looks like you are running may at maximum load of the CPU while the game and that is the cause of the crash. You could try a clean boot to prevent the using CPU resources while you play to see if it makes a difference of strtup programs.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click Start collapse this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  c. under the general tab, click Selective startup , and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all .

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK , and then click restart .

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OK and then click restart .

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK , and then click restart .

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start to reduce this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  On the general tab, click the Normal startup option, and then click OK .

  When you are prompted to restart the computer, click restart .

  I hope this helps. Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get an Access Violation error when playing games

  OP: Access Violation errors!

  I have download games on a game site that I trust and don't usually have problems. In the last 4 months, some of the new games that I downloaded and tried to play, give me the Access Violation error when I try to open the game to play the demo. Now just recently I noticed that several of my games that I bought and played for months, give me also Access Violation errors. I worked on it for months with people in customer service (on the site of games) and have not solved. The strange thing is, I can play some of these games on different websites without any problems or Violations of access at all. Yet the customer service people keep trying to 'fix' my computer, as if it were from my computer something to make this happen. At this point, I'm so frustrated that I had to try to get you all to see if anyone has experience this problem before and/or solved this kind of case before. I tried to turn off my Norton before download and play without success. I've updated everything that could be updated in regards to drivers, and such go.
  My system is Vista 32 bit, IE8, Norton Security and anti-virus.  Thanks for any help!

  Hello saund477,

  My research, I find that it is a known problem with Big fish games. I also see that some users were able to solve this problem and play games by disabling the antivirus program on their computer.

  I suggest that you turn off the Anti Virus program and check if you are able to play the game.

  Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

  You can refer to the thread below that I found that the forum of Big fish:

  http://forums.bigfishgames.com/posts/list/4106.page

  I also suggest that you post your question to the Bigfish forum for a better answer to this question, because the problem is only with Bigfish games:

  http://forums.bigfishgames.com/games/list.page

  About the error when you try to run the command, it seems that you type the command correctly, make sure that you type the command correctly.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• No longer, play games for 2 years.

  Since I switched to Vista 64 Ultimate Win - XP, I was not able to play games on my PC. Initially he hung up and stuttering on noise; requiring a hard reboot. I just updated my PC to the following specifications. Custom-made 64-bit PC. with the Asus P5N - D MB. 3.3 quad core CPU, 1333 MHZ, 8 GB of memory at 1333 mhz front side bus. and a monitor for LG M2762D-pm, the 1080pi - 1 TB WD Black Sata HD 27 ". Running Windows 7 Ultimate 64.

  I can compose music with Sonar 8 and make videos with Pinnacle 14, but now whenever I try to play the Sims3, The Witcher or Fallout 3; instead of the sound glitch; my screen turns off, but the game continues to operate. The monitor will not return without a hard reboot.

  I tried many solotions, such as upgrade my equipment and tweeking screensavers turned off and never turn off monitor but no help: I hope some of you can tell me something that will help you. I want to play my games, but don't know what else to try.

  Ronnie Bee

  It all starts with the drivers. Start with the motherboard chipset drivers that are compatible with your operating system. Download current drivers for your audio and video cards/chipsets (you don't only mention those who are) plus all other devices that you connect to the computer.

  Some old games that XP can you run is not compatible with Vista or Windows7.

• I CAN'T PLAY GAMES FOR THE 'BING' PAGE LISTED

  HI, I'M KIRK, MY PROBLEM IS GAMES, I CAN'T LOAD SOME GAMES WITHOUT THE 'BING' APEARING PAGE, WHEN IT THE FACT I DON'T KNOW WHATV TO DO TO CORRECT OR ERASE OR ELSE, WANT IT LET ME LOAD OR PLAY MY GAMES, CAN YOU HELP ME PLEASE.

  Hi w. KIRKPATRICK,.

  I guess you're talking about playing games online in Windows 7.

  (1) what happens when you try to play online games when BING opens?

  (2) do you mean say that BING opens when you start Internet Explorer?

  From what I understood the question seems simple. Change the home page default empty or some other sites that you want to, should make you feel better.

  Access the link below to do the same thing, because he can explain most once better that I can actually do on the post.

  http://Windows.Microsoft.com/en-us/Windows7/change-your-Internet-Explorer-home-page

  Let me know this is not you want. I would be grateful if you can better explain what the question. I would also like to know what games is that you are trying to play and what website.

  Is it just that some games bring to the top of the page Web BING?

  Recover and we'll see what can be done better.

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• No sound while playing games and how to carry out the AV rear?

  Original title: cannot turn off surround, just 2.1 speakers.

  I only have some 2.1 speakers, but in all my games (World of Warcraft, Call of Duty, etc.) I can't hear any sound coming from the rear because there is no way to disable surround. I went through all the options in my playback devices, but found nothing. What can I do?

  Hello

  1. did you of recent changes to the system before the show?

  2. is it works much earlier?

  3 is the issue limited while playing games?

  4. What if the sound works fine in your system?

  5. don't you want to disable the sound design?

  Method 1: audio playback convenience store open

  Follow the link below and follow the steps mentioned in the link and check if it helps.

  http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter.

  Solve the problems associated with the sound of the games Microsoft or mapping programs

  http://support.Microsoft.com/kb/812394 (applies to Microsoft Games).

  Method 2: Correct sound problems.

  Follow the steps mentioned in the link given below and check if this solves the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Method 3:

  Follow the link below and check if you can disable the sound surround.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-high-definition-sound-and-music-from-your-computer

  In addition, check out the link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  It will be useful.

• No time to play games on this

  I have no time to play games every day to solve this problem. I have authorized update in order to install a version of Skype. After obtaining several jingles that I don't need and a new program start, I decided to remove it. When I try to delete through the control panel I get this message: "the installed product does not install or sources." Until a matching source is provided or the installed product and source are synchronized this action cannot be performed. "I don't know where to find this appropriate place or what to do. Other uninstallation of third-party tools have the same problem. Only the search results are sending me to Skype, where he speaks for most updates and ideas do not work either. It won't let me even begin an account ask their. I was playing with that for too long already and I don't have time for it and need to have this removed. The more something is trying to force me to keep more I want gone and will never have anything to do with it. Can someone tell me how to get this deleted? Thank you.

  You must download and install this 'some version of Skype' in the same way that you did initially and then restart the computer when it is done.  Then you should be able to pass under the--> "Programs and features" Control Panel and find it in the list of installed applications and remove it appropriate.

  -If you have difficulties to do with other third party applications as well--it really sounds like something voluntary (an application you run the cleaning of temporary files, etc., or similar) or involuntary (malware) has made changes to your system after the installation of the said applications, break their methods installed Self Easy uninstall.  (All the Panel control--> programs and features list is something that third-party software providers can use to allow users to see what is installed on their system and then provide an easy way to remove or update or modify a simple way said application - if desired by the provider of such third-party.)

• Screen goes black for a few seconds while playing games

  I come here who need help, I was this problem for some time and were not able to find the solution on my own.

  The question:

  Sometimes when I play games my screen will go black at a random time for a period of time (sometimes only a term of 5 to 10 seconds, other times up to a minute) and then gets himself and I am able to continue to play. The sound continues to play during the blackout, but I have no control of my computer. Nothing does not and cannot use commands such as ctrl + alt + delete. Sometimes, when my computer is recovering from the black screen, I hear the fans on my GPU boost up to about 80%. I put in MSI afterburner to increase my fan speed as the temperature of my card. Sometimes during recovery from a black screen, my fans will increase from 25% to 80%. Then, there is 80% for the rest of the time until I reset my computer. Once my computer is reset, my card will be 25% more.

  Contextual and computer information:

  This question is not started past until I installed and new graphics card and reinstalled windows 7. The GPU has been tested before I reinstalled windows 7 and everything is perfect. no power outages. I reinstalled windows 7 because I had an SSD.

  Here are my features right now:

  PROCESSOR FX-8350
  Card MOTHER Asrock 970 Extreme3
  RAM (2) 4 GB DDR3 1600 and (2) 8 gb DDR3 1866
  SSD 120 gb w / windows 7 installed top
  GPU Radeon r9 290 (upgrade a radeon 6950 which took perfect)
  Corsair power 800w

  a few last things to add that can be useful:

  -I did not black when using my computer and do not play games screens.
  -J' usually have low games such as the League of legends. who are not too intensive on the gpu
  -When I insert in the UEFI, my RAM displays all the sticks clocked at 1600 MHz. Even if 2 of my poles are 1866.
  -My gpu never went more than 74 degrees since ive installed, so I don't think its an overheating problem.

  If you need more information, let me know and ill be happy to provide it. Any help will be MUCH appreciated. I get crazy at this time because I can't figure this thing out lol

  Thank you - Nick

  Thanks for the help! I actually just figured it on mine.

  Here's what the matter was.

  Afterburner in fact has not been increasing fan speed, I had put in place as the time grew. Tried running my r9 290 to 60% of the speed of the fan. Never had a black screen again. I'm glad that I can play games now. Only thing that sucks is my r9 290 is a powercolor card that uses a unique suction fan and blows air on the side. THE THING IS EXTREMELY NOISY at 60% lol but I managed to get the r9 290 for only $200, so I can't complain.