Someone at - it install a printer wireless HP 3054 with Mac OS Lion?

Similar Questions

• Cannot install the printer wireless with error code 0 x 00000643

  Original title: error0x00000643 on the installation of the printer

  try to install printerget wireless to the final installation and getting the error 0 x 00000643. Windows Vista 64-bit

  Hello

   
   
  Thanks for posting your question in the Microsoft Community.
  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
  (1) did you of recent changes to the computer before this problem?
  (2) what is the brand and model of the printer?
   
  Please follow the methods and mark the question below:
   
  Method 1:
   
  I suggest you to install the printer in clean boot mode.
   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Method 2:
   
  Install the latest drivers for the printer from the manufacturer's website and check if that helps.
   
  OR
   
  You can also uninstall the printer using the network browser and install it again.
   
  To do this, follow these steps:
  a. open the network and sharing Center. To do this, type Network Center and sharing in the search box and then click Network Center and sharing in the list programs.
  b. in the pane tasks, click view computers and devices.
  c. find the printer and then right click on the printer to uninstall.
  d. once the printer is uninstalled, reconnect the printer to the computer. The Plug-and-Play service begins to install the printer.
   
  Reference:
  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).
  http://support.Microsoft.com/kb/944960
   
   
  I hope that the information above helps you.

• Pavilion: try to install my printer for laptop HP with Windows 8

  Hello

  I am trying to install my printer HP photosmart c4180 to my laptop HP Pavillion (Windows 8 not sure if 32 or 64 bit).  I downloaded the software but when I try to install my printer on my laptop via a USB cable, I get an error troubleshooting.  I tried to fix this in the solutions offered by HP but can't make it work.

  Help, please!

  Jackie

  Have managed to install the printer.

• Reconfigure wireless Photosmart C4380 with Mac OS 10.6.2

  I use the wireless all-in-one printer with Mac 10.4. before and remember that I had to uninstall the HP software when I started using my new MacBook with SL 10.6.1 and 6.2. one more later. I also understood how to scan. Everything went well for a few weeks.

  But now the computer does not find the printer more. Wireless which is. And I don't seem to be able to reinstall the printer. Wireless which is. The printer tells me that it is not configured for wireless - now.

  To set up the wireless, with the original installation HP you can connect printer and computer by cable first and unplug it to establish a wireless connection. This doesn't seem to work now. I can cable, but this doen help connect me to gonfigure the wireless in the printer. Can only unconnect and work wireless.

  Any solution?

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=OJ-74785-1&LC=en&DLC=en&cc=us&product=3221646&OS=219&lang=en

  Be sure to select the download of the software.

• LaserJet m1217nfw mfp - Dungeon print wireless failing / falling on Mac OS 10.7.5

  I installed my LaserJet m1217nfw mfp at least 4 times during the month using my Mac running on OS 10.7.5. The first time was with the CD supplied with the printer, and the last was 3 times with the latest version of the software downloaded from HP.

  Each time, wireless printing is set up and works without a problem (using these official instructions from HP: http://www.youtube.com/watch?v=48mLZoRjJm0). But a few days later, when I try to print the same Mac Wireless, it does not find the printer on the network. And nothing on the network or router has changed.

  It is quite frustrating. I doubt for the 5th time will solve the problem once and for all.

  Any ideas much appreciated!

  Thank you

  Hi SC_W

  I understand that you keep losing wireless connection.

  I have included a document for printer is not maintaining the wireless connection.

  To configure the static method IP go to step 6: your HP product of the assign a static IP address.

  If the printer deposits the wireless again follow step 4: perform a power reset on the HP product and a wireless router and then restart the computer.

  Hope that helps.

• Install a printer hp 3050 has with an iPad.

  My new printer hp 3050 has provided with a cd to be put in place. I bought specially for printing from my iPad. Of course, there is no slot with an iPad and everything I read in the manual indicates no other choice. Can I get this done via the Internet? Help please!

  Hi, first of all please check if your printer in the list: http://support.apple.com/kb/ht4356 if SO, you can use this hotfix/install: iPad: http://www.apple.com/support/ipad/assistant/airprint/ No. If you print by using other applications (if any) as http://itunes.apple.com/au/app/hp-eprint-home-biz/id299531647?mt=8 more information of this: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Cloud-Services-Supported-Printers-ePrint-Airprint-Print-Apps/td-p/351574 http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Important-Information-for-ePrint-Home-amp-Biz-Users-on-iPhone/m-p/1693011 cordially.

• How to install the printer Laserjet 1012 HP with Windows 7?

  Original title: printer problem

  I have a 1012 HP Lazerjet printer I want to install on my new system of windows 7?  Please help me!

  Hi pilsberydoughboy,

  It seems that there is no driver for Windows 7 for HP 1012 Laserjet Printer. However, some people managed to get the printer to work in following some of the suggestions in this thread.

  LaserJet 1012 Windows 7 drivers

  http://forums13.itrc.HP.com/service/forums/QuestionAnswer.do?admit=109447627+1285148706253+28353475&ThreadId=1381135

  See if it does the same thing for you.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP officejet 6500 a printer works with Mac Mountain Lion but scanner is not

  had a 10.6.8 imac and I used and scan with hp printer HP officejet 6500 a.

  Just got a mac mini 10.8.4 and the wizard migration used to move all my programs and information.

  The printer works just fine but the scanner does not work.  When I try to start the scan by pressing the printer screen it says computer no. detected as part of the message.

  If I click on the scanner icon on my dock it says

  HP Scanner 3 cannot be opened locks of Aproblem.  Check with the developer to make sure that HP Scan 3 works with this version of Mac OS X.  You may need to reinstall the application.  Don't forget to install the updates that are available for the application and OS X.  There is also a report I can click on and sent to apple.

  I got a free mini mac technical support - they helped me with the migration, and then a few days later, I called for what they help me with things that were not working as before.  All resolved but this.  They said contact that HP may be there is something that I can download to make the scanner work?  Hope I don't have to buy a new printer.

  Thanks for the tips .

  Hello

  Yes, go ahead and put this folder in the trash, I would also suggest restarting the Mac and repair disk permissions in order to avoid any possible permissions errors that can impact on the installation:

  Hello
  Follow the steps below to repair disk permissions:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.

  Once you have finished my steps above to reinstall the software.

  Shlomi

• Tips before buying HP all in one wireless to work with mac and AirPrint

  I am looking to buy a HP Officejet Pro 8600 as my current HP is on the blink (well I think it's that I posted here with my problem with the Office Jet Pro 8500 and now it does not work with my mac at just my PC windows) but I need to know if I buy a HP Officejet Pro 8600 can I upgrade the network and not only print , but the scan wireless (probably more AirPrint) to a Mac Book Pro (end of 2011 on the last updated firmware), or is there a better printer for this task which is so cheap that I do not use the fax, but I'm going to use all other options; I print about 300 pages per month, as we Exam course and working documents to be printed on a regular basis in my house, that's why I'm leaning towards an Office Jet.

  Can what advice you give?

  Finally, what is the difference between a HP Officejet Pro 8600 and HP Officejet Pro more than 8600?

  Sorry I'm so "wet behind the ears" when it comes down to this

  See you soon.

  Hello

  The 8600 pro is a great printer, however, the 8500 is great too...

  By looking at your original post the question more likely related to your network and not with the printer itself.

  Before purchasing a printer new please try following the steps below and let me know if this can help, if the problem caused by your router you will instead see a similar behavior with the 8600 too:

  Unplug the cable ehthernet on the side of the router, and then connect it directly to your Mac (a direct connection cable between the printer and the Mac itself).

  Wait 2 - 3 minutes to allow the connection to fill and then open print & scanning.

  Click on the sign more and add the printer listed as Hello.

  Now start the software update from the Apple menu and check if you can scan via print & scan, Capture Image or excerpt:

  http://support.HP.com/us-en/document/c03550518

  If the analysis works by bypassing your network the problem caused by lack of compatibility Hello of the BT Home Hub, which can be called as Hello, mDNS, by different router or multicast IGMP manufactures...

  I recommend you contact your router service provider to check if it supports this feature and if such can be activated by changing the settings of the router, a firmware update, etc.

  You can find more info on this requirement in reviwing Solution 2: check your router for compatibility Hello in any information from Mac OS X in the document below:

  http://support.HP.com/us-en/document/c02915280

• Printer Installation failed LaserjetP1102W with Mac OS10.9

  I downloaded the software on my new imac, but unable to get anything to print.  What should I do?

  Hi HPJohn

  I tested the P1102w on Maverick and the manual duplex and will not properly work because drivers installed on Maverick. (Apple drivers)

  The will of the printer duplexing on Maverick drivers. I tested it on our lab. It will not prompt to reinsert the paper, but the attention led will Flash. Return the paper and reinsert and you will have to open and close the cover to continue printing from the printer doesn't have a button back.

  Unfortunately, it's a lot of time. Sorry, this feature no longer works for the maverick at the moment.

  I would sign up for updates from the HP driver. When available, you will be informed by e-mail. Click here.

• How to print manual duplex mode with mac?

  I can print in the manual duplex option: it is absent.

  Whith windows operating system, it is available.

  WHI you do not a plug-in for mac?

  Hello
  To perform manual duplexing, Joanie you use the Pages to the printer setting, you can find below:
  http://support.HP.com/us-en/document/c01663233

  Another alternative, you can use is the HP two-sided printing software:
  http://FTP.HP.com/pub/softlib/software12/COL35975/MP-88750-2/HP_Two-sided_Printing.dmg
  You can access this tool by clicking the PDF button at the bottom of the print dialog box, and then select double-sided printing and follow the on-screen instructions.

  Kind regards
  Shlomi

• where can I find my SSID to install a new printer wireless?

  I am trying to install a printer wireless to my desktop computer.  I have already installed and running with my HP laptop. I used a connection wired eithernet and it asks me for my SSID # to install the printer.  The program is installed, but it will not be printed. I'll try again, but he'll still want my SSID im sure.
  Jewellee

  Hello

  ·         What operating system is installed on the computer?

  I suggest you to use the same SSID that you use to connect to your router and then try to install the wireless printer and check if that helps.

  You can consult the manual of the router or the properties of the network adapter for the SSID.

  See the following link for more information.

  http://WWW8.HP.com/us/en/support-topics/printer-installation/wireless-printer-troubleshooting.html?JumpID=reg_R1002_USEN

• trying to install my new printer wireless, keep saying window installation service could not be accessed.

  trying to install my new printer wireless, keep saying

  Window installation service could not be accessed. This can occur if you are running windows in safe mode or if windows install is not properly installed.contact your support for assistance staff.
  I'm not running in safe mode...

  Thank you so much, I used the fix it guy and it fixes the problem, I was able to install the printer wireless without problem...

• DeskJet Ink Advantage 3635: Cannot print wireless and scan

  Shop I bought says it is compatible and when I brought home for them to check, they could not solve my problems.

  Can not find the model on the list. HP team, is it compatible? What can I do?

  Hello

  Thank you for choosing HP. I understand that you are unable to install the printer wireless operating system windows 10.

  DeskJet 3635 is not compatible with the operating system windows 10.

  Thank you

• Computer will not print wireless or network

  original title: my computer is anti-social

  It will not print wireless or network with other computers in the House.  any advice?

  Hello

  1. what version of Windows is installed on the computer?

  2. were you able to print earlier?

  3. are you able to print via a wired connection?

  4. What is the brand and model of your printer?

  5. are you aware of any changes made to the computer, before the show?

  Method 1:

  Temporarily disable your antivirus software, and then print.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Method 2:

  Check out the following link.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps.