Reconfigure wireless Photosmart C4380 with Mac OS 10.6.2

Similar Questions

• Photosmart c309a all in a pr: driver for Photosmart c309a with Mac OS 10.10 (Yosemite)

  I plan on upgrading to Yosemite, Mac OS 10.10, but do not know if my Mavericks driver will work or if I need to download a new one.

  If I need to download, can someone tell me where to find it? I'm completely lost in the drivers section. So many links and so confused.

  Thank you

  Michele

  For someone else with the same question, I found the Photosmart c309a on this list of printers that are compatible with Mac OS 10.10 (Yosemite). http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c04473034&DocLang=en&docLocale=en_US&JumpID=reg_r1002_usen_c-001_title_r0001

  It took forever to find the right search expression to access this article.

  HP it guys, this site is very difficult to navigate. I couldn't yet find my own question in the forum until someone posted a response. And then, the layout of the answer was so cluttered, I wasn't sure what part could be an answer from him or just more links leading to pages across the site.

  Please simplify things. Thank you.

• Someone at - it install a printer wireless HP 3054 with Mac OS Lion?

  Set up printing wireless with Mac OS Lion

  Yes, I did.  Download the latest version of the software for your printer from the "Support & drivers" link at the top of this page.  Choose the "Full Featured" software and the driver and install it.

• How to reconfigure wireless network extended with several base stations

  I have a wifi network in an Airport Extreme wired to the modem from our Internet service provider and an Airport Express Terminal extended wireless in another part of the House. I recently added a second Airport Extreme (also extended wireless) to boost coverage in another area of the House. I want to have the Express and the extreme second each wireless connection directly to the base station to the modem to have the shortest path to the main base station, but the Airport utility network diagram seems to keep showing the network of linearly (main Extreme base - second extreme - Express). So, two questions: first, represents the schema of utility Airport the signal path real (linear Express by Extreme II, then to Extreme II/modem)?  And secondly, if so, how to reconfigure the network to have both Express and Extreme II forking the extreme base I directly, rather than having the food by Extreme II, then Extreme I Express. The network showed that the desired branched network yesterday, but today went back into the linear trajectory. I tried a simple drag and drop graphic to move the Express, thinking that surely the Apple would implement such a simple, logical and direct way to manage the network, but no. Have not seen another way to configure the network manually, so any suggestions would be appreciated.

  It is very important to understand that Apple "extend a wireless network" works on signal strength.

  In order to have the AirPort Express and AirPort Extreme to extend the network of the 'main' extreme wireless, two conditions must be fulfilled:

  (1) the AirPort Express and AirPort Extreme extension should both be on the same relative distance of the extreme 'main '.

  (2) AirPort Express and AirPort Extreme extension must both be closer to the extreme 'main' they are to each other.

  In other words, a well put together would have your "main" AirPort Extreme in the middle of the House, with a Terminal AirPort Express on one end of the House and the AirPort Extreme to the other end of the House.  In this configuration, the two airports are about the same distance from the extreme 'main'... and... "" oth extending airports are located more close to the "main" airport that they are with each other.

• Problem of compatibility printer PhotoSmart C7280 with Mac OS 10.7 (lion)

  my printer hp photosmart c7280 all-in-one will work with the new mac os 10.7 (Lion)?

  Hello

  If your HP Officejet 6500 has worked very well with 10.6, after that upgrade to the HP software Lion should continue its work, there is no need of updated drivers.   Have you tried that?

  second - if you have updated to Lion and removed the HP software before, make sure that the printer is turned on and connected to the Mac (usb or network), a few "Add printer" and go through the steps, the Mac check Apple software updates and download the latest driver HP for you.

  Hope this helps

• Tips before buying HP all in one wireless to work with mac and AirPrint

  I am looking to buy a HP Officejet Pro 8600 as my current HP is on the blink (well I think it's that I posted here with my problem with the Office Jet Pro 8500 and now it does not work with my mac at just my PC windows) but I need to know if I buy a HP Officejet Pro 8600 can I upgrade the network and not only print , but the scan wireless (probably more AirPrint) to a Mac Book Pro (end of 2011 on the last updated firmware), or is there a better printer for this task which is so cheap that I do not use the fax, but I'm going to use all other options; I print about 300 pages per month, as we Exam course and working documents to be printed on a regular basis in my house, that's why I'm leaning towards an Office Jet.

  Can what advice you give?

  Finally, what is the difference between a HP Officejet Pro 8600 and HP Officejet Pro more than 8600?

  Sorry I'm so "wet behind the ears" when it comes down to this

  See you soon.

  Hello

  The 8600 pro is a great printer, however, the 8500 is great too...

  By looking at your original post the question more likely related to your network and not with the printer itself.

  Before purchasing a printer new please try following the steps below and let me know if this can help, if the problem caused by your router you will instead see a similar behavior with the 8600 too:

  Unplug the cable ehthernet on the side of the router, and then connect it directly to your Mac (a direct connection cable between the printer and the Mac itself).

  Wait 2 - 3 minutes to allow the connection to fill and then open print & scanning.

  Click on the sign more and add the printer listed as Hello.

  Now start the software update from the Apple menu and check if you can scan via print & scan, Capture Image or excerpt:

  http://support.HP.com/us-en/document/c03550518

  If the analysis works by bypassing your network the problem caused by lack of compatibility Hello of the BT Home Hub, which can be called as Hello, mDNS, by different router or multicast IGMP manufactures...

  I recommend you contact your router service provider to check if it supports this feature and if such can be activated by changing the settings of the router, a firmware update, etc.

  You can find more info on this requirement in reviwing Solution 2: check your router for compatibility Hello in any information from Mac OS X in the document below:

  http://support.HP.com/us-en/document/c02915280

• Cannot scan with Photosmart C6280 with Mac OS x Snow Leopard.

  When I try to scan with my Mac, I get a scanner not found error.  I am able to print.  When I access the HP utility, it shows the printer in the installed column but it shows a Red House beside her and will not let me access it. The printer is connected to an Apple Airport Extreme, via an ethernet cable, and the airport is linked via a USB cable to the computer.

  I guess you mean that the printer and the Mac are connected to the router with Ethernet Airport?

  If you are using snow leopard and have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall< scrubber="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• Cannot install HP photosmart 5520 with Mac 10.7.5

  Hello

  After installing running and the printer connected to the wifi I can't 'Add' the printer to my printerlist. Tried with wifi switch, with the pack, the new HP download CD. Nothing works, I always get the following message is displayed:

  "The software for this product is currently unavailable. Please contact the printer manufacturer for the latest version of the software.

  Any ideas?

  Thank you!

  Hi julianIB,

  I'd love to help you add the printer to your Mac.

  Please try first leaving the printer, unplug the power cable and also stop the Mac. Please do not restart the mac, I would like you to choose "Shut Down". After a minute you can plug the power back in and restart the Mac.

  You can now go ahead and try to add the printer again. I think that this will solve the error message and allow the update to get.

  If this does not resolve the problem, try the following steps.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Problems with HP Photosmart C4380 wireless via a router from Cisco RV120W

  We recently purchased a Cisco RV120W wireless router and now we can´t connect our wireless Photosmart C4380 printer.

  During the installation process, we get the message: "the can´t computer communicate with the printer on 192.168.0.216. It can be caused by firewallproblems. Check that the 427 UDP port are not blocked in and out of traffic"(translated from Danish).

  If I remove the USB cable and try again, the installation continues and Announces: 'printer found – connected to the LAN' - but in the end: "Printer installation is not complete" - aurgh!

  The report-network printer looks OK all the way.

  Can someone help us we are frustrated.

  Greetings Jens Ove and Helge

  Sorry, but I'm not familiar with this device.  However, I would search in the areas of networks, VPN and security.

  You want to be sure of not having active VPN and also look for implementing isolation.

  This manual can help: http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf

• HP Photosmart C4380 [8A36CB] communication error with MacBook OS 10.7.5 more wireless

  Hello

  I get the message 'communication error' when I try to print wireless at a Photosmart C4380 of my MacBook (OS 10.7.5) through a Router 2 GB TimeCapsule.

  The message also says: "/ usr/libexec/cups/backend/dnssd failed ', but I don't know what to do with...

  I tried to de - and re - install, reboot the laptop, printer and router and pull all the plugs in different sequences, first use the USB cable to install wireless and any other help HP... but nothing seems to work (doctor of HP is not available for Mac).

  The weird part is that:

  1. He started a couple of weeks, without having changed anything (to my knowledge),

  2. printing of my iMac works fine (same network, same software, same settings version, etc.)!

  2. printing via the USB port on my MacBook works fine

  3. can I print a test page form "Utility from HP" my MacBook (and of course my iMac but it works very well even when)

  4. I can access the printer through "http://hp8a36cb.local./index.htm?cat=info&page=printerInfo" and there is just no problem not mentioned whether,

  5. the "Configuration Page of HP network' and the 'wireless network Test report' congratulating me for the installation of my printer wireless... but it doesn't work.

  I read almost all messages on communication errors more wireless but that you have not found an answer to my question (yet).

  Is there anyone with a solution? Please?

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• Photosmart C4380 - wireless connection stops my wi fi connection

  Hello

  I have a problem with my Photosmart C4380 wireless. In recent weeks, I have a new router from fi wi for internet connection. The problem starts if I want to print a document: if I connect to the printer my Internet stops. In addition, if the document to print is a picture it is all purple but I don't know if it's a question of color or if it is because the problem of connection. When I put the memory card directly into the printer, I could see a picture printed even if had still some purple color in it.

  Anyway, my first problem to resolve is the connection problem. How can I make two connections (PC to the printer) and PC to the router work together?

  -Operating system: Vista Edition Home Premium - Service pack 2

  -Wireless (PC to the printer) and PC to the router

  -Do not get the error message. Just to lose internet connection

  I hope you can help me because I don't really know what to do.

  Thank you in advance,

  Good bye

  Fabio

  You said you have a connection Printer to PC and PC to Router. That is not how this printer should be connected. There are two types of home network connectivity No.1 Wired network is ethernet cable from printer to router. You should also have an ethernet connection from the router to the pc. In this type of connection the router is called the access point which enables communication wireless from a wireless capable device like a Laptop. The printer is now on a wired network No.2 Then there is purely wireless - no wires involved. By the way, a USB connection is not a wired connection. USB is independant and has nothing to do with home networking. As far as I know, this printer uses a usb cable for wireless installation only. While installing the printer select wireless and continue. The printer will not be found, click continue and you should be prompted to temporarily connect a USB cable. When device discovery is complete you will be prompted to remove the USB cable. Then the installation will test the wireless connection and that should complete the installation. I would suggest a complete uninstall using level 3 uninstall found on cd or download files Util\CCC\uninstall L_3, Do Not use L_4. This doc c01122127 found at HP.com has a video showing screen shots during the install process I have described above.
  

  Good Luck
  

• Pomp A60-106: how to print wireless using HP Photosmart C4380

  Good afternoon

  I confess that I am no expert PC but have spent 4 hours this afternoon trying to follow all the help and support options to turn on my laptop to print wireless using my new HP Photosmart C4380.

  Wireless network adapter appears under control panel, but I can't get the light to come on the front by FN and F8, of the any or others 101 things I tried thorugh etc. Device Manager - I'm sure that there is an easy way, but I can't find it and lose the heart! Can someone offer me some ideas?

  If so please have them step by step so I can make sure I don't miss anything.

  Thank you in anticipation of your ideas...

  Rachel

  Hello

  I'm sorry if this seems a silly question but first:

  Are you REALLY sure have a wireless card installed?

  And the second question:

  Do you have already turned the switch on "ON"?

  Because otherwise, the light will NEVER go up.

  Please give feedback if you tried to change the pit wireless switch 'ON '.

  Greetings

• 6800 with Mac Officejet Pro Wireless printing problem

  Hello

  I use a 8600 Officejet Pro with a Mac on Mountain Lion

  He was fine and now will not work wirelessly with mac, macbook or Ipad.

  I have double connections wireless enabled and all on the same network, but will not see printer when I try and add it again.

  It works fine when connected by usb

  Any ideas please?

  Thank you

  R

  The printer is always connected to the network?  Check by going to Configuration > network on the front of the printer and network Test search and print.

  What router are you using? You've restarted it by pulling on the power cable?

• Problem with photosmart c4380 using the black cartridge XL

  Why my photosmart c4380 suddenly not recognize the Black XL cartridge which was working previously?  When I replace it with the previous cartridge (standard size), he seems to recognize and begins the process of allignment.  I have another XL cartridge, but at nearly £40 a go, I am reluctant to that that I'm already using waste AND another a new.  I get the warning message indicates that a cartridge is missing or not detected.  Anyone has any ideas please?

  I found it - I knew that it was there!

  This is a link to a youtube video that tells you how to do it.

  http://www.YouTube.com/watch?v=euzrPLMqDNc

  This sequence should be added at the end of the document that designates any person who responds to this request.  I don't understand why it is so difficult to find this answer? What can do this code? If the answer is not much, then surely its evidence suggesting people try to hp?

• Printer: try to connect a HP Mini laptop with a HP Photosmart C4380 printer.

  I have a laptop HP Mini and I have connected an HP photosmart C4380 printer by plugging the cable from the printer to my computer and follow the instructions to install it.
  The installation went well but when I try to print, there is an error message and the file goes on the line (there is no detail on the error).
  Is it necessary to install a CD of the printer before? If so, I never saw... What can I download it from the HP site and if yes, can you me how...
  Thank you very much... Angelo

  Download a Vista driver for your printer.

  Support for drivers &
  http://welcome.HP.com/country/us/en/support.html

  Do not plug your printer when prompted to do so. Must be supplied when you connect.

  I hope I could help