Sometimes when I started, the windows display is biased and the Start button is off the screen. What's wrong?

Similar Questions

• Start window manager: sometimes when I started my PC I have a black screen with the Windows boot manager at the top.

  Sometimes when I start my PC I have a black screen with the Windows boot manager at the top.  Although there are several options available, that nothing happens no matter what keys I hit and the only option is to shut down the computer and restart completely.  Sometimes the Boot Manager page turns and my office sometimes opens fine.  I've updated with everything Microsoft has Windows Vista and I still get this screen.  Anyone has any ideas.

  Do a startup repair and see if that fixes it:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• my printer worked fine in the past, but now when I try to print, it says document is in Quebec, but it is offline. What's wrong?

  my printer worked fine in the past, but now when I try to print, it says document is in Quebec, but it is offline. What's wrong?

  dougnatz,

  Try to run delete print jobs to remove all blocked the queue print jobs.

  Rick

• Satellite C855 1QQ started working when I open the screen

  When I turned off my pc and also close my screen. Then, when I open my pc my screen starts to work automatically.

  How can I close this property?

  I also found another useful document:
  + Why my laptop Windows 8 start automatically when you open the cover of the display? +
  http://APS2.toshiba-tro.de/KB0/FAQ2C03FA0001R01.htm

  There are two possibilities. A hybrid shutdown occurred in Windows 8 (default option) or the "open Panel - Power On" is activated.

  "If this function recommended by the first document above, you can disable the hybrid stop or you would also disable the open screen - Power On.

• Sometimes when I access the net via firefox, a new tab opens and opens on a Web site. How can I block access to this Web site?

  When I access the net with firefox, a new tab opens on a specific page. How can I block access to this site or stop firefox from loading? Here is the site in question:
  http://AdultFriendFinder.com/go/g1110961-PMO
  not once have I ever accessed this site and it doesn't show up in the browser history

  This has happened

  A few times a week

  is since I started using firefox

  Make a check of malware with a few programs to scan for malware.
  You must use all of the programs, because each detect different malware.
  Make sure that you update each program to get the latest version of the database.

  http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  http://www.superantispyware.com/ - SuperAntispyware
  http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
  http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
  http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  ..........
  See also 'Spyware on Windows': http://kb.mozillazine.org/Popups_not_blocked

• HP Pavilion g6-2330dx Notebook: keep displaying the "Windows Installer" dialog box and pressing OK button to restart over and over again

  Hello

  I tried to update my laptop Win8 to Win10, but before that Win 8 must be upgraded to Win8.1 then Win10. Unfortunately, I encountered the problem after you install the free upgrade to WIn10.

  I decided to use the system recovery and the source is from my USB.  (I created the USB key recovery).  The restoration was completed and started making configuration suddenly my laptop just because of the excessive heat caused my laptop stop does not complete the installation of windows 8 and finished to get the dialog box of "Windows Installer".

  I inserted the USB key, but it seems that its not reading. I tried F2 - mode of the system, but it only shows the Bios and other tests not the usual display of F2.  I haven't tried F11 and same thing no chance.

  My question is, how do I make my laptop back to the operating mode as the way to reinstall the entire operating system and HP Recovery Manager or HP configurations.

  Do I need to buy a CD of HP recovery my laptop?

  I have HP reactions appreaciate or someone who is ready to help and assist.

  Thank you in advance.

  Screen of the image below:

  

  Hi there @KierV,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP Support. I understand that you had initially a question of upgrading Windows 10. After the upgrade, you have tried to restore on Windows 8 (previous version), and now you have issues going back.

  I did some research for you. I'll provide you with some troubleshooting documents that I had found.

  The first document is called a troubleshooting (Windows 8) HP system recovery problems. If this does not work, please follow this document called recover your computer from a USB flash drive. Please follow the troubleshooting steps in this document to see if you can get the USB recovery media you created to operate.

  If the USB key that you created still doesn't work after you troubleshoot, you can either you make on the Order Recovery Media-CD/DVD/USB and drivers HP Pavilion Notebook PC g6-2330dx Page or you can use the following link to create yourself a file number, then give us a call:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.
  
  They will be happy to help you immediately.

  If you want to try to restore Windows 8, Windows 8.1 upgrade and then upgrade to Windows 10 once again, please read this document called upgrade to Windows 10.

  I hope this helps!

  Have a great day!

• When I start my laptop script error on the screen.what that means and how it get rid you

  When I start my laptop SCRIPT ERROR comes on my screen. What it means and how to get rid

  You have assigned to a category of forum that is completely different to your question/problem. Your question has been moved to a forum category that matches it's better.

  If you don't already specify the product name, Windows version, version of the program and other necessary information on the product you have a problem with: do so immediately!
  And please explain the problem more in detail. Do not try to give an overall summary abstract with terms invention. Use natural language. Explain step by step what you do and what you see and why it is a problem.
  Provide accurate and complete data: exact error message of name, exact product of exact, exact file names, exact address... you get!

• When I tap on the touchpad on my HP Pavilion dv7 cursor sometimes also jumps on the screen

  When I tap on the touchpad on my HP Pavilion dv7 cursor sometimes jumps somewhere else on the screen. I sent 2 times to HP and it has been returned without problem found. They advised me to set the pointer at half speed, but it still happens. I found on the HP web site, a newsletter which confirms that they seem to have a problem: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01471084&tmp_task=solveCategory&lc=en&dlc=hr&cc=hr&lang=hr&product=4075797#.

  It is apparently related to the thread "Windows UPDATE Caused typing problems (Jumping cursor... )" It only happens when I type' and 'double tap', not when I type. So who is to blame?

  To disable the option of tapping helps but it is only circumvented the problem.

  And HP article points to its own software system BIOS or touchpad as the culprit, not the operating system.  I've seen a number of updates offered on Windows Update that can potentially manure with a touchpad settings; Quick Launch buttons specific to the virtual devices/interfaces/drivers ACPI BIOS that control things like the programmable buttons or special function keys and updated for HP, TouchPad software and driver updates.

  Non-Microsoft software and published on Windows Update for driver updates are put there by the respective hardware or software developers, not by Microsoft.  Many users just automatically install what are updates are available without looking too close description of the update and do not realize that they just installed an update to a third-party product as opposed to an update of the operating system.  Some users don't even know the difference.

  I would check the forums to support consumer of HP for a potential solution.  Several times, HP will have a new driver or software provision, but he gets only appearing on the support pages and download for currently marketed models, not on discontinued models.

• Sometimes when I type the letters do not appear immediately

  Lately when I type the letters don't appear on the screen.  I spent the last hours of the couple trying to clean up my computer, but I don't really know what could be the cause. This happens in all programs.

  Hi Netsrik,

  The problem occurs in any particular application?

  Method 1
  I suggest opening the keyboard on the screen and check if the problem persists.

  Type without using the keyboard (on-screen keyboard)
  http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard

  Method 2
  Keybord updated drivers from the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest you to check for the keyboard repeat rate.

• Hi I have a three month old g6 Pavilion and sometimes when I close the lid of the machine stops.

  When I close the lid on my g6 he died. When I restart it I get the message Windows does not stop correctly.

  I put the instruction for the lid to do nothing on the fence. This anomaly is intermittent.

  G6 laptop computer A5H00EA #ABU

  Windows 7

  64 bit

  I hope someone can help

  Hello

  Like this sound like a hardware problem, you should contact HP and arrange for the laptop repaired while you are still under warranty.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Error returned (sometimes) when you use the tag < cfxml >

  I have a problem when you use the < cfxml > tag, its seems error when I try and view the XML over a certain length, because it works for some of my folders and others do not.  Is there a known displaying stuff in the cfxml tag size limit?

  Here is my code, I don't know how to move forward on this issue. Well, any help would be apprciated.

  Right.

  It is therefore being truncated when it is read in the DB.  Nothing to do with CFXML.

  Looks like it is hitting the size of the Long text buffer (which by default is 64 KB).  Increase this value (in your DSN settings, advanced).

  --

  Adam

• display a page when half of the screen went black then now can only read half

  My screen now has only half the viewing area. Some of the icons have moved across the screen too. Half of the page is now dark with just the icons indicating at the bottom. What I can do to get back to a normal full page please.

  [Moved from comments]

  Hi Emily,

  Thanks for posting this question in the Microsoft Community Forums.

  I see that the computer screen only appears on half of the screen and the other half is black.

   

  Let us work together to solve this problem.

  However, we need more information on this issue. Please answer the following questions.

  1. what operating system is installed on the computer?

  2. What is the brand and model of the computer?

  3. when exactly this question produce?

  4. don't you make changes to the computer before this problem?

  Please answer the questions so that we can better understand the issue.

• Sometimes when I adjust the volume on my iphone SE the volume will jump to full or mute and he will remain stuck, how can I fix?

  It can be very annoying. For the moment, I have to restart my phone whenever that happens and I want to know if there is a way I can stop password or a better way to solve what restart my phone? Help, please!

  'Force' restart your iPhone.

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  If this does not help, tap settings > general > reset > reset all settings and then try to adjust the volume.

• Satellite M40: Errors graphics when you change the screen resolution

  Hello
  I have a Satellite M40 and a big problem.

  Windows xp pro sp2:
  When a program changes the resolution of the screen, the screen is messed up.
  I see only scratches and only a reboot can run back (or suspend-to-disk).

  [edit]
  I plugged an external monitor to the laptop and it works,
  the laptop screen is full of lines and the 2nd monitor shows what the laptop screen should normally display also
  [/ Edit]

  Linux:
  This can be seen also at the change of the Xwindows mode in linux back to tty(1-6)

  Here are some pictures of this strange behavior:
  http://www.ronnylindner.de/extern/images/Toshiba/Screen1.jpg
  http://www.ronnylindner.de/extern/images/Toshiba/screen2.jpg
  http://www.ronnylindner.de/extern/images/Toshiba/SCREEN3.jpg

  It looks like a hardware problem, but would it be just a bad bios setting?

  What can I do?

  Goodbye and thank you in advance, Ronny

  Post edited by: [email protected]_DE

  Hello

  There may be something wrong with the screen of laptop computers.
  I guess that the graphics card is ok because the external screen works properly.

  But it s very interesting to know if you are using the graphics driver from Toshiba. If this isn't the case, please check if this problem also appears after installation of the graphics driver from the Toshiba driver page.

• When I login, the screen just shows my backround

  Recently while trying to partition my hard drive (for storage purposes), there is a startup error, I ran simply cranking up the repair of my recovery disk and I was back running. When I started Windows Vista I have come to the login screen, but my keyboard did not work, I connected the keyboard on the screen, once I logged all that appeared was my desktop backround. No mouse, menus records or anything like that. I can't really lose my files... (of the important things on my hardrive,) what should I do?

  Thank you

  You may have a corrupt user profile. To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If that is the only available Administrator Profile (you need to be an administrator to fix this), enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055.  If you don't remember the password, try nothing because that's probably what you (or seller) did during the installation.  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.