Sorting by Capture time images

Similar Questions

• Sort by capture time does not

  
  I looked at the responses to similar topics, and most of the problems had something to do with video files. Here's my problem, I have recently updated my Lightroom CC. When I imported 3 Lexar 16 GB cf cards pro using a Lexar workflow Tower, all imported correctly. Which means only one card at a time. I used 2 cameras Nikon D700 separate shooting only RAW files. When I hit 'Sort by capture time' nothing has happened. Files begin with 'D7A' and 'D7B"to keep a tab on what camera which takes snapshots. However, LR is now alone, sorting by file name and no time. I double checked to make sure that the time stamps are correct. I'm on Windows 7 has anyone else seen this behavior? Any suggestions? Many thanks - Harry

  I never had this problem '' IF '' the time has been set correctly on both devices. Check the cameras to see if they are turned off in a few minutes or more. Not if they are out of time, but if a camera is set to 12:00 and the other on 12:05 or 01:00.

• Sorting by Capture time?

  New digital photography I take seems to be perfectly managed by LightRoom 2015 CC, there is a time to Capture poster and when I sort a file or a collection of these 'capture time' it works as I expect, but when I take an old photo taken on an old camera or scanned recently or years ago that I'll meet serious problems trying to associate a date for the old photo and then have sort correctly and I have been reading and browsing for hours and have found no clues other than that stores Lightroom several dates and times with a photo I am sometimes (sometimes only) able to see in the EXIF metadata Preset and they understand :

  Date time Original

  Date time digitized

  Date time

  (see: Lightroom files can contain several Dates "Julieanne Kost's Blog of ")

  I don't see an easy way to change these fields, and they tend to "come and go" when you browse the different files with the same "EXIF Preset' selected. However, I can edit and sort by (yay!), called the Capture time, that would be great if it worked. But unfortunately edition the using metadata to capture Date/time / command menu to change the Capture time doesn't seem to change how this picture sorts out when 'Capture time' is selected for the type.

  The only other option triage is called 'Added order', which is perhaps one of the three metadata fields that I list above?

  It seems to me that someone above Adobe worked ENOUGH SACRAMENT HARD to make it so difficult! ::) or I have a damaged catalog or user, me, is missing some basic notion. In any case, I hope that everyone who reads this will forgive my attempts rather feble to hide my frustration in this. There is a lot of work to change the timestamp date 22 thousand pictures, especially when you have already done in Photoshop elements Organizer and little if any that is deferred and appartently needs to be redone. So yes, I'm frustrated, so forgive me and help me understand what is happening, refer me to something I should have read before starting this project, give me homework, I have a Lynda.com account, just please tell me not concerning the bug well documented with metadata in video editing, this is not what it is. Please do not give me great detailed explanations of the three options to adjust the Date/time of Capture on selected images, I've lived all this. I just need to know how to change a date field for a photograph that Lightroom will allow me to sort by and I don't like that it is or if I lose any reference to another date the file is trying to remember (I do not remember when the photo was scanned). And please excuse my tone! I'm really a fan of the product, but he left me speechless on this problem! ::) Thanks for the advice, suggestions and patience! : )

  -Michael

  Huge thanks to johnrellis and Just Shoot Me for pointing me in the right direction, I think I'll answer my own question since I think I know roughly what the problem was and what to do about it, if you use a Mac like me.

  (1) it is primarily a problem with scans, I received from ScanCafe.com, they have done a GREAT job but left something weird in there with metadata.

  (2) I went to the app store for Mac and bought this: Mac App Store - PhotoMill: batch convert, edit metadata, rename, resize, watermark and more

  (3) make sure that you understand about the file formats and how LightRoom manages metadata. In my case, I deal with JPGs and have LightRoom updated all the metadata automatically. If you are not familiar with this aspect of LightRoom, stop here and do some reading, you'll see why if you read on.

  (4) with closed LightRoom, I opened all the images of ScanCafe and essentially put the capture date, creation date, and modification date for the desired date, since I care anything else then will forgive for not work this up yet, but if you're like me and you have a digitalized picture just don't care when you analyzed the darn thing! Why change the date Mod? Because I don't know what I'm doing, so I just changed it, omniscient mod date will reset to the date I do other changes to this file, no biggie, I took just a shotgun approach because I was frustrated.

  (5) very important, once you're done editing all stamps date and time of all the images of your bad conduct, launch LightRoom and select all the images you just edited the metadata, then right-click on one of them and select metadata / reading

  (6) it warns you that you go to the wire of the writing of metadata in the catalog for these images, which shouldn't be a problem, because you have read step 3 above and you know that all the necessary metadata has already been written in the files. If you're good. Say very well and let it read disc and begin to sort correctly.

  Thank you all, sincerely. Drinks on me at the World Famous Magic Castle in Hollywood for your help johnrellis and Just Shoot Me tell you when.

  Your friend for life,

  -Michael

• Two cameras will synchronize together to help sort by Capture time

  Hello ~

  I recently used a second shooting game for the first time at a wedding I shot, and I tried in vain to get them to be sorted in Lightroom using Capture time. I changed the time to match already and it worked, but when I sort these photo by capture time, it only sorts camera 1 hour of capture, followed by camera 2. It not sync the time of two cameras together. Does anyone have advice? I scoured the internet for the answer to this all day today and yesterday and can not get help!

  Just a guess... perhaps the day is not set to the same value, or time zones are not properly defined or something like that

  But if you're not going to show us a screenshot, show us the date and time, so we can diagnose the things

• LR is more sorting images by capture time

  Good afternoon

  I have been using Adobe Lightroom 2 with Photoshop CS4 without any problems.

  However, recently I got problems with the order in which to store my images is LR.

  I work in Raw and always start LR. From there on, I open my image in Photoshop before making any adjustment and then by saving in 16-bit PSd or Tiff.

  On the first save the format tiff/psd file normally resides in LR - IE next to the original raw and virtual copy. But now, when I come back to changes in Photoshop psd re-recorded file is moved to the beginning of the Lightroom library. The area around the image is darkened and against it, it has a message 2 0' and the phrase 'the photo is part of a stack.

  I don't understand why he did this and I do not voluntarily battery use. I want to just my images on screen, next to each other for ease of use.

  All my photos are sorted by capture time and even if the files in question are the good time he still does not stop Lightroom to place upstairs, out where it should be.

  It is not a huge problem, but it's quite annoying when you have thousands of images in your catalog, and he has never done before. I restored LR for the default settings, but it did make a difference.

  Please can someone help.

  Right-click on an image in the folder or the collection and select stacking. You have the option to expand or collapse the batteries and also the ability to stack automatically during capture . With auto tack stack by capture time , you can select the time range for auto stacking to apply. It sounds like you have battery auto by capture time together. If you do not want to pile up time at all then this set to 0 seconds.

• Filter by Capture time?

  Does anyone know if it is possible to filter photos in Lightroom by 'capture time '?

  I want to start working on a blog that deals with the difficulties and spinoffs to photograph landscapes during the mid-day.  It would be extremely useful I might have Lightroom filter 10 000 + images in my library for me show that those taken between 11:00 and 14:00, for example.  Any ideas as to how this could be done?  This is not part of Lightroom features, is maybe some kind of plugin?

  Just to clarify, I know that I can sort by capture time, but my experiences seem to show that in sorting by capture time, there is automatically a sort of first level by Date of Capture, which means that this method doesn't really work in the way I described above.  My goal is to filter the entire catalog and show photos taken between two times of day, but without regard to date.

  Any help would be greatly appreciated.

  ====

  * I guess I should add that I am using LR5.

  Post edited by: JG_Coleman

  The filter any plugin should work

  PS: I want to see your blog post when it's over.

• Bug in the Edit Capture time function?

  I have problems with the feature 'Edit Capture time' in LR3. I'm curious to know if others have a similar experience and you have a few suggestions.

  I have lots of old jpg files that have been scanned and stored on my computer over the years. The actual creation date is not correct on most of them. As I was their import in LR3, I tried to change the date and I've been to unexpected behavior when trying to resolve several images at the same time. What I noticed is that LR3 will correctly assign the new time of capture on some images. The rest, he attributes a time completely random capture that could be earlier or later than what I selected years. I have to repeat the process several times on the images with the wrong date before ultimately bringing all to have time to capture that I want.

  To clarify what I mean by several images, I would say that it could be as little as 2, and other times, it's as much as 100 + images. I use the stamp of time in my naming convention for my file names are unique, so I like it to be as accurate as I can get it for stuff I shot with film. I'm running the 64 bit version of LR3 with the latest updates on a computer that is running the 64 bit version of Windows 7. I have 8 GB of memory in my machine. More than enough free disk space. Does anyone have ideas on this?

  Another thing that I will mention, that may just be me not understanding how the feature is supposed to work. I put a time to capture the 25/05/2000 12:00:00 AM for 33 images. After several attempts to get all 33 of them to make the change, I have them sorted by capture time and noticed that after 10 images from the time of 12:00 to 12:00:01. Then it changed to 12:00:02 after another8 images until I finally touched all the images of 33. I thought it was supposed to put them all to the same date and time? Here, because I do not remember the time I took these pictures in 2000, the only reason why it is important is so that the images appear in the correct order when I sort by capture time.

  I didn't know what it is about that online, but I thought I could put it out there and see if I get anything back

  Let me first explain how the "time capture Edit" is supposed to work in LR (the UI is a bit missleading here), and maybe that will shed light on what you are seing:

  • If you have a picture selected and choose "Adjust at a date and time", the time of Imaging is set to the date / time specified.
  • If you have more than one selected image and choose "Adjust to a date and time", time of creation of the most selected image is set to the date / the specified time and time of creation of all other selected images are adjusted by the same amount of time, because the image chosen was to be adjusted to the date / time specified.

  Example:

  Image	Date/time before	Time after	Change Header 4
  More selected	2010-08-01 15:00	2010-08-03 17:00	+ 2 days + 2 hours
  2nd selected	2009-01-15 01:25:13	2009-01-17 03:25:13	+ 2 days + 2 hours
  3rd selected	2003-12-31 23:00	2004-01-03 01:00	+ 2 days + 2 hours

  I guess that what you are writing is based on different (perhaps with 1 second interval) original date/time on your images.

  Gossweiler beat

  Switzerland

• Sometimes they have a hard time capture the image on a physical machine

  Hello

  Last night I had a hard time getting the image on a physical computer.  The machine is a windows 200 advanced server with Service Pack 4.  Last week, I was able to do it without any problem with the same thing.  I was finally able to capture the image after that I went into control manual (Add/Remove Programs) and remove the agent then rebooted. Has started the process more.

  The log file is attached. I'm just curious as to why the problem occurred.  I used the Converter 3.0.3.

  TNT

  It could be a problem with the version of the converter that you use. Of the 3.0.3 release notes, in the section "problems":

  New that task fails for source machine remote Windows when navigating backwards in the Conversion Wizard

  When the following circumstances are present, the physical source computer does not restart:

  • You are remote hot cloning a source of Windows 2000 or Windows NT4 machine

  • The agent is installed on the source machine, but the system has not yet been restarted

  • You change the selection in the source and change to the original source before clicking on finish in the Conversion Wizard

  In this scenario, the task will fail with an instant failure error message. The reboot is required to start the snapshot on the source remote machine service if this converter can take the snapshot of the machine.

  You can try to use the 4.0 version converter and see if you can reproduce the error.

  If you found this helpful, please consider naming pointsIt

• How to add image capture times that do not have EXIF?

  Hello

  I have a lot of photo (jpeg high quality) a scanner dia have not all the EXIF data. Lightroom takes the date of creation of file to order, which is annoying. Is it possible to add these photos capture time, since I've known about since they were taken?

  Samuel - on Lightroom 3.6 / win64

  Metadata > command change the Capture time is going to change the time of one or more photos.  Beware that when you change the time of a lot of photos at the same time, LR shifts the time of all those, rather than being at the exact same time.   The Capture time of Exif plugin is also provided for the scanned images.

• How to sort by "Date time digitized?

  Hello

  "I understand the differences between" Date time Orig ", Date time digitized" and "Date Time". I scanned images that show the original time and Date time digitized. But I can't find a way to sort by Date time digitized, only Date time orig. help, please!

  Thank you

  Michael Morrison

  In the EXIF standard, Date original time is when the image was captured originally, i.e. when the shutter is pressed.   Date time digitized is when an analog image (film) was scanned (digitalized); for digital cameras, usually Date is the same Date time digitized original time.  The Date field time is supposed to be the last time that the software (or firmware) changed the picture somehow. LR is not well maintain Date time.

  Date of the capture of LR usually shows the Date time original EXIF. (When Date time Original is missing, LR is trying to use other date fields, but it is buggy and confusing.)

  Unfortunately, LR provides no method for sorting by Date time digitized. However, both plugins provide only ability: List View and the data Explorer.

• Capture time lose fractions of a second

  Hello

  I use LR 5.7, Camera Raw 8.7, on a Mac OSX version 10.10 and have noticed that recently I can sort is more correctly on time to capture images.  When I look at the XMP file, I find that the capture time is always recorded with the decimal part, the value 00 considering that in older versions were maintained, tenths and hundredths

  It's very annoying when shooting sport with motor drive I'm getting lots of images 7 or 8 who all seem to have the same time, so I can't count on being correct - even with filename sorting order is not good for me, as I often shoot with two bodies.

  Does anyone know if there are plans to restore it?

  Thank you

  Chris

  I submitted a bug report: Lightroom: change the Capture time keeps the fractions of a second.  Head over to this topic and add your vote.

  If you encounter this problem, again, you can use the Exiftool free to adjust the date/time outside of LR.

• HP DM 4.5 SP2 cannot capture an image of WES2009 of T5740

  We use Altiris and have problems with PXE. To deploy images that we intend to migrate to HP Device Manager 4.5 SP2. Installed on a Windows 2008 R2 and FileZilla Server. EVERYHING works fine, but when I capture an image from a thin client WES2009 T5740 custom image will not capture. The thin client EBOOT 2 times and installs some files on the workstation. After the installation of the files, the thin client is reset each time in Windows. You see a HP backupground. A windows Device Manager is popping up and restarts the workstation. No idea why it does not work. If I capture an image Windows XPe to a T5730 capture with FTP works fine. With T5740 WES2009 won't yet make the FTP connection. I tried an old image of WES2009 and the last image of WES2009. It does not work.

  Today I installed the Device Manager in the production environment. The mentioned in the above 2 posts is a facility in the environment of the OTA. In production it works. Image captured from the Device Manager is saved with the option of shared folders.

• HPDM 4.5 SP2 - unable to capture the image

  I installed HPDM 4.5 w/SP2 and have hurt captures an image of Smart zero of a HP T410 (I have not tired yet other thin clients). I did not save my old settings because I wanted to start from scratch because I didn't keep any of the old images in any case.  A test of the ftp protocol and shared folder filing came back successfully by using the repository Editor.

  Everything else seems to work very well as I am able to clone parameters and send a command to reboot successfully but when I try to capture and image, it fails with the following information.

  2013-05-22 09:17:15 sent special to the device management gateway

  2013-05-22 09:17:17 task has been retrieved by the Agent.

  2013-05-22 09:17:20 capture image to the master repository.

  2013-05-22 09:17:20 capture image to the master repository.

  2013-05-22 09:17:20 the common task cannot run.

  2013-05-22 09:17:20 the common task cannot run.

  2013-05-22 09:17:20 the common task cannot run.

  2013-05-22 09:17:20 the common task cannot run.

  The agent update task also fails and the underside of the log information.

  2013-05-22 09:43:16 reference card: master repository

  2013-05-22 09:43:16 sent special to the device management gateway

  2013-05-22 09:43:18 task has been retrieved by the Agent.

  2013-05-22 09:43:22 copy files using the master repository repository.

  2013-05-22 09:43:22 the common task cannot run.

  2013-05-22 09:43:22 ErrorCode: 14031022, detail of error: could not download the file (s).

  2013-05-22 09:43:22 the common task cannot run.

  2013-05-22 09:43:22 ErrorCode: 14031022, detail of error: could not download the file (s).

  2013-05-22 09:43:22 the common task cannot run.

  2013-05-22 09:43:22 the common task cannot run.

  I don't know there is a setting somewhere that I forgot, but not sure it is and was hoping someone could point me in the right direction.

  Yes, the shared folder is mainly used for WES units.
  Can you see something in the ftp log which leads to an error?
  With FileZilla FTP Server, you can see in real time what is happening.
  With IIS, etc., you will need to check the logs.

• In almost real time image processing

  What is the best way to implement almost "real - time" treatment of image with two usb cameras? Capture, process, showing results and then capture, process, etc. until I chose to stop the program. I use LV with vision development module 8.6. What function can I use to capture the image?

  With LabVIEW 8.6, you can get the driver NOR-IMAQ for USB cameras .  It's really similar to the other drivers IMAQ, but examples are provided in this knowledge base.  To use several cameras, you will use just two copies of the screws.

  I'm not sure if you need more information than that, but let me know if you have any more specific questions, with which I can help.

• Having problems capturing the image with 2 cameras and the PCIe-1430

  I have problems of switching between my two cameras and breaking or capture images in Labview or MAX. I can switch between cameras and capture images very well so that in the Vision Development Module, but not in Labview or MAX. However, it does not work the first time I have capture an image of a port, but not after that.

  This the error I get LabVIEW:

  1074397150 error occurred at Snap.vi IMAQ

  Possible reasons:

  NOR-IMAQ: A timeout error has occurred while you wait for it
  specified event.  If you expect a picture, check that all the videos
  data are acquired during the period.  If waiting for a
  signal, check that the assertion of signal occurs within the time limit
  period.

  This error I get from MAX:

  The IMAQ error

  Error 0xBFF60022

  A timeout error occurred while you wait for the specified event.
  If you expect a picture, make sure all video data is acquired
  during the period. If you wait for a signal, check that the
  affirmation of signal occurs within the time limit.

  The following list is what I currently use:

  1 card PCIe-1430

  2 cameras JAI Pulnix CM-140MCL

  LabVIEW 9000 f3

  Vision Assistant build 20090611041452

  MAX 4.6

  NEITHER Vision 9.0

  IMAQ 4.3