Sound does not work under Vista on Satellite A200

Similar Questions

• Keyboard does not work under Vista on Satellite L300D

  Dear readers,

  I have a Satelite L300D with Windows Vista 32 bit Home Premium. It is about 5 months and so far I have not had problems.

  Today, I started the book and noticed that I was not able to type my password for Windows.
  I thought, there must be a problem with the keyboard and restarted the laptop.
  I tried to enter the Bios and I wonderd, keyboard worked as expected it. Back to Vista, the keyboard does not work yet.

  I rebooted again and activated Capslock befor the Windowsstartup and looked at the LED.
  Just after the appearance of the Windowslogo, Capslock off a keyboard was dead.
  So I thougt it must be a driver error. I deleted the two driver files Hardware-Director told me where the drivers keyboard, rebooted twice a keyboard had returned to work, but only until the next reboot.

  So I decided to make the recovery of HARD drive and reinstall Windows, thinking, this should fix the problem.

  But it's still there.

  Is there someone who could help me? If this is an error of the driver, is should have disappeared when the laptop is in a State of delivery, right?

  I would be very happy for any advice or help

  Greetings from Berlin

  Thomas

  PS: I want to say sorry for my bad English... :-)

  Hey mate

  > It's about 5 months and until now I didn't have problems.

  I wonder why this keyboard problem happened after 5 months of use?  :|
  This means that this keyboard worked fine using the Vista and the Toshiba Recovery disk operating system but recently stopped working if the Microsoft OS is running.

  In my eyes it s a hardware issue ok, it s really strange that you can use it in the BIOS and the Linux system. But I recommend to contact the ASP (certified partner) in your country and ask if the technician could test with the new keyboard.

  I think that your warranty is valid and therefore everything must be covered by the warranty!

  Good luck

• USB ports do not work under Vista on Satellite A200

  Hello

  I bought a 2nd hand A200.
  I formatted directly and installed Vista Home premium.
  After all pilot facilities, I detect that the USB ports on the right side do not work :(

  There is no driver chipset for Windows Vista. But only for XP.
  I have installed to test the chipsaet XP drivers in Vista, but the same problem is still there.

  Please, everyone the same problem?

  Hello

  What model A200 do you have exactly?

  If you need a chipset for the Intel chipset driver you can download also from Intel page directly. This t shouldn't be a problem

  On the other hand, it would be interesting to know if the USB ports on the right do not work with any external USB devices.
  Have you tried to connect a USB mouse to all these ports?

  Sometimes a simple delicate solves these annoying problems.
  -Disconnect all USB devices
  -go to the Device Manager
  -remove all USB host controllers and hubs USB root to the list of devices
  -restart the laptop; wait until all devices would be installed
  -reconnect the USB device

  In my case, this procedure has helped several times.

• Re: Satellite P100-194 PSP6AE sound does not work under Vista 32 bit

  Hello world

  I got a nice Satellite P100 and configure Vista for a friend. I don't have the CD that came with the computer, so I installed those on the Toshiba site. I found out later that there is a proposed order of installations, and there is no chipset driver for Vista, so I used the XP one.
  As far as I got, everything works fine but the laptop remains silent. There is no sound from the speakers at all. Windows says it all was going well and there is a level moving in the sound mixer, but he remains silent.

  Does anyone have an idea what I could check or change? I would be very happy!

  Thanks in advance,
  Markus

  From my point of view, there is a hardware malfunction.
  Why? Because the sound through headphones. Therefore, it is not a software/driver problem.

  But what you could do is to check the audio playback device by default:
  Go to control panel of-> sound-> the Read tab
  Here the speakers should be peripheral activated and chosen as a default value.

• Built an MSI that does not work under Vista but works under XP

  We have built a MSI file that does not work under Vista but works under XP. No errors occur in the installation.  Running the installation "as Administrator".  But the application does not start without errors.

  You'd better choose to post your question in the developer forum. You can try the MSDN forums below, but you should definitely provide more details when you do.

  MSDN forums - http://social.msdn.microsoft.com/Forums/en-US/categories MS - MVP - Elephant Boy computers - don't panic!

• Touchpad does not work under Vista - Satellite A110

  I installed Win Vista business on Satellite A110...
  I downloaded the alps touchpad drivers: the drivers are installed, but it does not work!
  Is this a known issue? I did something wrong?
  Thank you

  Downloaded the correct drivers for your computer? Sometimes the machines appear to be similar, but then they have different hardware...

  Your touchpad has a function before?

  Welcome them

• Satellite A200-1AX: many applications does not work under Vista

  Greetings,

  I bought A200 1AX a few days ago and I'm not having a good experience with regard to the installation of applications on this Vista box. Even install yahoo messenger did not work and produces the NSIS error. 3D max 9 installation does not work (even though some have managed to operate); Install Adobe CS3 (supposed to be for Vista) did not entirely - the photopshop component have not installed, etc.

  The bottom line, I plan to move to XP OS. Means the required BIOS update I have my Vista recovery CD will NOT work after the switch to XP?

  Thank you for your feedback.

  Best regards, Ashraf.

  Unfortunately I put t know how to help you.
  Usually, if the 3rd party applications are designed and support the Vista while there should be no problem with unique program facilities.

  Check if all software packages are completely cared for and compatible with Vista.

  > The necessary BIOS update means that I have my Vista recovery CD will NOT work after the switch to XP?

  No, after the update the BIOS of XP, you will still be able to use the Vista CD from recovery, but perhaps some functions such as the FN keys will not work.

• CD/DVD does not work under Vista

  I have a laptop Compaq Presario F700 under Windows Vista Home Premium.  For the first year and a half i have owned my laptop, my CD/DVD drive worked perfectly.  A month ago it has stopped working completely.  It does not appear in my computer or Device Manager and it does not open.  I don't think that the drive is defective because it will open when the first Compaq screen shows up, but when the Microsoft Corporation loading screen is up, it stops working.  I used Google to good use, but none of the solutions I found worked.  I tried to delete upper and lower filters but they aren't there, and I tried all the solutions Microsoft Fix - It nothing works.

  Any help is greatly appreciated

  Hello

  Reader might indeed have gone wrong.

  Check with support from Compaq and their forums for known problems.

  Compaq - Support
  http://www.Compaq.com/country/cpq_support.html

  Compaq (HP) - Fourms
  http://h30434.www3.HP.com/PSG/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Update does not work under Vista

  Hello! I have Vista Ultimate 64 bit and a few weeks ago, I noticed that my windows updates had stopped working. I followed the instructions to do a repair of my drive, but got "the upgrade is not available. Press Cancel and then select upgrade to a newer version than what you have "." However, there is nothing that gives me this opportunity. How am I supposed to fix it then?

  I have a feeling that this happened after a service pack has been installed (3?), but as I put it to the automatic updates I have not noticed exactly when he had ceased. I'm frustrated and very frankly also irritated. I paid a fair bit for Vista Ultimate and I'm basically says my drive is useless. I ran the Microsoft Fix It, and he said he solved the problem, but it didn't. I also did a system restore and that do not also not fixed the problem. The error code I get whenever I have try to do an update is 80070490. I saw a lot of messages from people having this same problem, while searching for a solution, so there's obviously a problem somewhere I would appreciate to help get it sorted please.
  Thank you and best regards,
  Sharon

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  or

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  A repair install is the usual solution of SFC/scannow does not work.
  However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 or SP2 for Vista

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

  Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

• FN key does not work under Vista on a Satellite A100-192

  After the key Fn for Vista Installation do not work.
  HotKey Utility and other tools are installed (in recommended order), but when to start Vista displayed the error message: "could not start the HotKey Utility.

  All the other device works.

  Hello Kat

  I have the same laptop. This is the Satellite A100-504 comes with Windows XP Home edition. It is the different number (504) but the same hardware configuration, and the number PSAA9E. I have preinstalled Vista last week successfully and everything works well.

  You use facilities upgrade Toshiba Vista DVD or you own Vista DVD?
  In any case, I installed clean Vista OS (using the facilities of Microsoft CD). After that, I visited the download page of Toshiba and initially downloaded the document called Instructions of facilities.

  Please, do the same and install stuff all listed in the order. It is very important. After this Vista should work well and also all Toshiba designed tools and utilities.

  BTW: standby power utility is not like before as Windows XP Home edition. Laptop uses Vista power settings now.

• Help! HP Toolbox does not work under Vista

  When nearly two years ago, I added a Vista PC to my network, I found that the HP Toolbox software - necessary to monitor the level of status and toner for my LaserJet 1320 - wouldn't install or run under Vista.  I contacted HP and they told me "us working on this and should have a new version available soon.  I regularly, come back and still would get a similar response.  Now that I replaced my last XP machine with a Vista computer, I'm more in need of this utility than ever.  I sent HP Technical Support and I was told ' sorry, pal, but you're out of luck.  The 1320 is no longer a current model so can't stand us it anymore. ' (With a strong commitment to customer support, I'm surprised they even bother to release the drivers!)

  Does anyone have a fix for this problem?

  After reading some other forums, I found that when you print a Test page through printer menu options, the page displays the ink levels.

• Driver Realtek 8103e does not work under Vista (DV4T), ethernet does not work

  I got a new motherboard under the vices, but now the ethernet does not (rj45).  I tried several drivers of other work say but it isn't on mine.

  Included are version 8/20, 9/21 and 1/24 (dates or latest codes) everything has been loaded at the front desk.

  I have the icon and when the cable is unplugged shows red X, which disappears when reconnected.

  Anyone have an idea when else I can do?

  I can't understand how a company like HP sends a non-working back unit after repair.

  If you had any driver installed for Ethernet before installing what I gave you...

  Then uninstall them all and also this driver which I gave you.

  Restart the system and reinstall this driver from me.

• My admin password does not work under Vista

  my administrator password won't work now, what do I do now because some programs require me typing my password and it won't take it. Please help, thank you, randy

  * original title - I have a windows vista, *.

  Hello

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Database pogram worked under Windows XP but does not work under Vista

  I have a piece of third party software that I bought in 2002 is based on MS Access. It is a program of inventory control with a number of predefined data entry forms and reports. Initially, he worked under Windows 2000 and continued running when I upgraded to Windows XP. However, after the upgrade to Vista, I get the error message "the Microsoft Data Access components are not found on your system. These must be installed to the program works correctly. "I've updated to Office 2002 to Office 2007 to try to solve the problem, but without success.

  Are there other components of access or other software that I can download to keep this work programme (the original third-party supplier is no longer in business).

  Furthermore if this third party access program is a "module compiled access", and then upgrade to Access 2007 will not help. You may be able to connect to the old Access db to Access 2007, but then you have to write all the modules to allow the use of the program.

  If the program is not a compiled module in Access 2007, you must change the vba modules to be complient with your installed version of access

• Screen saver does not work under Vista.

  I am running Vista Home Premium, but I was never able to get the screensaver running. Done everything I should, but it just never worked.

  Is there a solution?

  Here is the article from the MS Support about wireless pointing devices and screen saver...

  The screen saver does not start after the installation of a wireless pointing device

   http://support.Microsoft.com/kb/913405

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.