Sounds dead after mode 'sleep'. (Windows 7)

Similar Questions

• When we turn the or after mode 'sleep' my motherboard will load but then nothing else... White screen. If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  When I turn on my PC or after mode 'sleep' my motherboard will load but then nothing else... White screen.  If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  I have this pc for 3 years.  My system was full of unused and unwanted programs, so I rebooted to Vista, deletted all my old files that Vista had moved into the "old." This is when I started having this disorder.

  (I made this process more yet to see if it would help with no luck)

  My first thoughts were video driver... downloaded the new drivers 3 times.  scanned all the other drivers for updates ect. nothing seems to help...

  Anyone have any ideas?

  Thank you

  Dave

  I have

  I was able to download these files.  Rthl64.sys point - one component of your network cable in pictures device driver memory.  Interestingly, the dates of the 2006 pilot (Rtlh64.sys my Sep 26 07:20:23 2006 (45190CF7)), so it's most likely your problem.  Follow these steps:

  -Download a new copy of the software/drivers on the website of Realtek here: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=7&PFid=10&Level=3&Conn=2

  -Uninstall the current software/drivers on your system

  -Install the newly downloaded drivers

  -Monitor for more BSOD

  Here is a summary of the BSOD:

  BSOD BUGCHECK SUMMARY

  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 16:23:07.947 Sun 31 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 13:18:38.380
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03de3a30 fffffa80 '05bf1050 fffffa80' 072dc010
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 22:49:49.007 sat 30 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 5:12:31.440
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03def060 fffffa80 '05bdf050 fffffa80' 04aeb2d0
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6001.18000.amd64fre.longhorn_rtm.080118 - 1840
  The debugging session: 21:48:58.144 Wed Oct 27 2010 (UTC - 05:00)
  System Uptime: 0 days 9:49:32.487
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03a1ca30 fffffa80 '05-99050 fffffa80' 039c8c60
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

  -John ( http://www.carrona.org/index.html )

• X 51 R2 is very slow recovery mode sleep (windows 8.1, 100% of disk in the Task Manager)

  My X 51 that R2 is very slow recovery mode sleep (windows 8.1, 100% of disk in the Task Manager).  I ran the online support tool and Support tool help.  It takes 3-5 minutes before using the drive falls down to a normal level and the PC can be used.

  Please help.  Thank you.

  Hello

  This may have something to do with the settings in Windows 8.1. Take a look at this Microsoft Community forum thread, it may be useful.

• After entering the mode 'sleep', WIndows 8 occasioanlly stops.

  This happens rarely; only three times since the installation of Windows 8 about two months ago.  I use my computer on a regular basis and prefer to put in mode 'sleep'. Normally, the screen turns off first followed quickly by the computer go to sleep - in other words, all the lights and sounds of my Tower disappear and everything is happy.

  Sometimes after the screen stops normally, the computer takes about 5 seconds before the tower was asleep, before turning off. The delay is very sensitive. The next time I turn on my computer, it goes through the normal startup process (does not wake from sleep).  There is no error, BSOD or anything, but I lost all my previous session data as if I shut down the computer completely.

  I think I've identified the relevent event in Event Viewer.  The most recent is as follows:

  Log name: System
  Source: Microsoft-Windows-Kernel-Power
  Date: 25/05/2013-05:19:19
  Event ID: 41
  Task category: (63)
  Level: critical
  Key words: (2).
  User: SYSTEM
  Computer science: Home
  Description:
  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.
  The event XML:
  
   
     
      41
      3
      1
      63
      0
      0 x 8000000000000002
     
      2889
     
     
      System
      Homepage
     
   
   
      209
      0 x 58
      0x2
      0 x 0
      0xfffff88000b29e62
      4
      0
      0
   
  

  The two previous incidents are identical except the timestamp and BugcheckParameter4, the latest of which is:
  0xfffff88000afce62 and
  0xfffff88000c07e62

  If it helps, the 209 BugcheckCode in hexadecimal is 0x000000D1
  However, I couldn't find anyone get the same problem subsequently to spend in sleep mode, but then again I don't know much about this stuff ~

  Any help is appreciated. If there is any other information that you need, let me know what (and where). Thank you.

  Hi André,.

  The kernel power event 41 ID error occurs when the computer is off or it restarts unexpectedly. Starting a computer that is running Windows, a check is made to determine if the computer has been properly closed. If the computer was not closed properly, a kernel Power event 41 message is generated.

  I suggest you to refer to the article and check if it helps.

  Of core Windows event error ID 41 'the system has rebooted without cleanly close the first' in Windows 8, Windows Server 2012, Windows 7 or Windows Server 2008 R2

  Please post back with the results and we will be happy to help you further.

• Windows 7 hangs after mode 'sleep'

  I saw this question in previous discussions but non of the suggestions helped solve this problem on my workstation. I am running Windows 7 Home premium and off late (1 month or more) after the brief windows sleep the computer must be restarted to function fully. Video drags and mouse accused also by shots. Any help to solve this problem and stop the reboots will be a great help!

  Moved from devices on Windows 7 and drivers Forum.

  Sudhakar salvation,

  Thanks for posting in the Microsoft Community Forum.

  Rest assured that we would do our best to help you.

  This issue could be due to corrupted or outdated drivers or third-party software conflicts.

  Please answer the question so that we can help you.

  1. Have what measures you tried?
  2. What is the brand and model of the computer?
  3. Do you remember any changes before the show?

  I suggest you follow the methods below:

  Method 1: Safe Mode

  I suggest to start the computer using safe mode and check if the problem occurs or not. At the start of the computer Mode safe with the minimum set of drivers and files.

  Refer to section of boot mode safe.

  Start settings for Windows (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  If the issue happen not in Mode without failure, perform a clean boot and check.

  Method 2: Clean boot

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135/en-us

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 3: run the Troubleshooting of power 

  I suggest to follow these steps and run the troubleshooter of power:

  1. Open the Control Panel.
  2. Click on Troubleshooting.
  3. Click show all in the left pane of the screen.
  4. In the list of options, click Power.
  5. Click Next and follow the on-screen instructions.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

   

  Method 4

  I suggest you refer to the article and see if it helps:

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this will solve the problem, if not let us know with the updated status and we will be happy to help you further.

• Portege Z10t-a - intermittiently touchpad stops working after mode 'sleep'

  Hello

  I have a protected Z10A and the touchpad and keyboard intermittiently stops working after the mode 'sleep'. I can't wake up, or restart without re-booting.

  I did the update to the keyboard firmware docker as advised in a thread on January 2014, but this did not help the problem.
  This computer is 2 weeks.

  I was download site and updated all the drivers and updates.
  The computer works perfectly except for this problem.

  When the Tablet is in standby, the white led flashes, and it is when everything works fine, but if the light for some reason any does not Flash but still turned on, then it will not start and I have to restart the tablet.

  I have disabled hibernation in the options mode, but still no help.

  Any help would be appreciated.
  Thank you
  mm

  Hello

  I m wondering if the option (in BIOS) called Wake-Up on the keyboard is turned on.
  To restore the functioning of the computer from sleep mode, press the power button or any key on the dock of the keyboard for a short period of time. But the keys on the keyboard can be used if the option is enabled.

  Note: when the laptop is in Sleep Mode, the power indicator of will blink white. If the light flashes white, the computer laptop isn t set mode sleep!

• XPS 8700 Fax / Data modem not recognized after mode 'sleep'

  I have an internal modem installed pci-e.  After the system goes into sleep mode, the modem is not recognized.  Resolution is to draw the pci-e card, restart the system, then stop again, re - install the Fax/data modem and it is recognized, until the system goes into sleep or stop mode.

  How can I keep the device recognition, didn't have to pull on the map and re-insert/install whenever I start?

  When I look at the Device Manager after the mode standby or shutdown, the device will display hidden and not connected to the system.

  System BIOS is updated to the current 10 A

  Always include the version of Windows in your messages.

  You may need to change sleep settings and possibly disable hybrid sleep by using the Windows power options, and/or adjust the power options in the BIOS Setup.

• How to turn sound when switching mode sleep?

  Hello

  I got my 13 edge two days ago and have now installed all updates and upgrade the BIOS (how can this amount of updates it will take a new PC? Not surprised a lot of people have problems with their computers...)

  But I can't find out how to make the boring 'BING' when the computer goes into sleep mode. Looked in system sounds and the Control Panel, but I can't. Ether in power options...

  It's embarrassing during the day, but if she wakes up on LAN alert during the night I want it to be QUIET.

  Everyone knows?

  See you soon,.

  johfo

  Power Manager (Advanced mode)-> global settings-> power management options to

  Uncheck "beep when power state changes.

• Satellite Pro P100 - screen and sound problems after upgrade to Windows 7

  Hi all

  I got my Satellite Pro P100 (model number is PSPAEE-00C006EN and the second digit of the serial number is '7') upgraded from Vista to Windows 7, and since then, some bugs seem to have had place - can someone help me on the following:

  -L' screen DIMS increments, irrespective of the fact that I have saved my power settings to stay on FULL (battery or sector)

  -No sound. Once or twice, the sound card worked and settings to say this works correctly (and you can see the movement of the graphic equalizer).
  In terms of PC knowledge, I would be 5/10 (so not a dummy, but certainly not a pro! and we tried a lot of the more obvious things)

  Thank you all

  Hello

  1.) if the screen dim option doesn't properly work, I recommend you to reinstall Toshiba Value added Package. This package controls these functions, the keys FN and others. Visit the Toshiba page for an update!

  2.) did you check if the sound is muted if the equalizer work? In addition you can also try to update the audio driver might it work ;)

• 8500 a does not print after mode 'sleep'

  My Officejet Pro 8500 has just started having this problem in the last two weeks. Every time the screen goes off I have to power and power on again to use the fax, copy, or scan functions. I can submit a print job, print manually, or receive a fax and the video screen shows it's printing, fax, or scan, but nothing happens. I have to stop working, power works, and it works fine. That is until he's going to return to the "standby" mode.

  I tried, without turning off the power, unplug the system, wait a few minutes, then by plugging it to the top. It made like a reboot. Is there any other suggestions that I can try? Have to do 10 to 15 times a day is getting old.

  Thank you

  It seems that this has solved my problem completely. I lit my saving in last night and was able to receive faxes from one day to the next. Seems to work very well this morning.

• Lose my ethernet internet connection when the computer goes into mode 'sleep '.

  I have a desktop with Windows Vista.  I have my internet through a cable company.  I've never had problems of connectivity for 2 years and then out of no where he would pass the signal after mode 'sleep'.  I had the cable company come out and check on all equipment and it's good that now, I'm still clueless and confused.  The connection icon have an exclamation point in a yellow triangle and say "limited connectivity" and «identify...» "and then I click on Local area connection status and make a diagnostic test that will get me connected to"network 2 "until it goes into sleep mode and then the process repeats.  It's boring say the least.  When I login and go to the LAKE State he says;

  IPv4 connectivity: Internet

  IPv6 connectivity: limited

  Media state: enabled

  Duration:

  Speed: 100.0 Mbps

  He said that the issue is resolved after each diagnostic test, but then it happens again.  I need some help pleaseeee!

  > I need some help pleaseeee!

  But you're in the wrong group! It is a problem with your network driver
  or your Windows installation. You have this repost to a suitable for Windows Vista
  Forum. It is possible that a newer driver from the network has a problem with sleep
  mode, you should try another pilot (older or newer).
  From your description, there is a problem to renew the lease of your
  DHCP server (which must be running on your router), it does not use the
  IP address assigned earlier or he does not do / IP address (which
  should be the same) we get the router. It is also possible that the
  problem is with the router or a new firmware on this subject. You should study
  These two avenues, including a replacement of the router and firmware.
  Another very simple solution is to configure your PC for a static IP number and
  leave it like that. In the forum, I mentioned, people will be able to talk to you
  through this option if you don't know how to do this.

  --
  Kai

  IEFAQ: http://iefaq.info Newsgroup: microsoft.public.de.internetexplorer

• keyboard & mouse freeze after the mode 'sleep', using Windows Vista 64 home premium

  keyboard & mouse freeze after the mode "sleep", using Windows Vista 64 home premium.  I received once posted this question, an answer of "fix" to a thread that has worked.  Unfortunately, I deleted the thread. I swapped the USB connectors for mouse and keyboard, but that didn't change anything.  Could someone please re - send the wire?  I promise you that I'm deleting it this time.

  Thank you very much

  E-mail address is removed from the privacy *.

  Hi RICH0214,

  Follow these methods.

  Method 1: Follow the steps in the article.

  Device Manager does not display devices that are not connected to the Windows XP-based computer

  http://support.Microsoft.com/kb/315539 (applies to Windows Vista)

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Create a new user account.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• P2715Q, Windows size and location change after the mode 'sleep'

  Hey

  After that the monitor wakes up fashion 'sleep', all the windows are in the upper left corner and in different size just before going to sleep. It makes me crazy. Did not help. Found a few registry hacks key, but it can't be that difficult.

  I use following:

  View P2715Q Dell, Windows 10 Pro GTX 1070

  Everything is up-to-date.

  Really hope you can help me!

  #update 1

  It has something to do with how long the mode 'sleep'. I set the Sleep mode function 1 minute, whereas the display 'falling a sleep' and woke up after 30 seconds or more. Everything was in place.

  This isn't a question of monitor. It is a video card driver problem. Tiles from 1920 x 1080 uses two P2715Q sewn together by the video card driver to get the resolution of 3840 x 2160. So if the video card driver is slow to initialize the awakening from sleep mode, all open windows and icons are tossed at top left. We see this issue "tile" on AMD and Nvidia drivers. All you can do is to continue testing video card drivers latest when they are released.

  Workaround solution =
  * Spend 90% of your icons to the taskbar or the far left background
  * Close all open windows before allowing computer standby modes

• Network card in Windows 7 does not start after PC mode 'sleep'

  I'm having a problem with multiple PCs in a field by which after that the PC goes into sleep mode network connectivity is lost or degraded. PC users past in mode 'sleep' and they won't be able to connect, or if they can open a session they will not have access to network drives. Restart or NIC deactivation and reactivation of will solve the problem. Also note that he seems to have started after the installation of update for Windows Defender (definition 1.211.1747) definition.

  Hello

  Thanks for posting your query on the Microsoft Community.

  You mentioned that you are connected to a domain network, I suggest you post your query on the TechNet forums as we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Satellite L40t-b917 - sleep problem after upgrade to Windows 10

  Name: satellite product L40t-b917

  Operating system: Windows 10 (64-bit)

  Hello

  If I have problems with the mode 'sleep' after that I upgraded to Windows 10. When I try to resume my laptop from sleep mode, Toshiba screen seems then the unit turns off.

  After 2 hours of searching on the internet I found that a solution said that my drivers are too old. So I tried to download but my drivers resembles not yet supported.

  Any solution to this problem?

  Where can I download updates for my device?

  Thank you.

  Hello

  Go to control panel and uninstall the Touchpad, display, wireless and sound drivers/utilities.

  Restart, and then run Windows Update to install the updated Windows 10 compatible drivers.

  Make sure that the BIOS is also the latest version.