Support of NI CompactRIO for LabVIEW 2015 missing

Similar Questions

• Support of NOR-DNET for LabVIEW 2013

  We currently use OR DNET 1.6.6 with LabVIEW 2011. I installed LabVIEW 2013 now also on my computer and tried to synchronize all of the drivers with my installation of LabVIEW 2011.

  Well, it seems that NEITHER-DNET does not support LabVIEW 2013, at least officially. compatibility of Version of LabVIEW and NOR-DNET indicates that NEITHER-DNET 1.6.6 supports 2011 NOR-DNET 1.6.7 2012 LabVIEW and LabVIEW.

  The list NOR system driver November 2013 set OR DNET 1.6.7 defined pilot. When I try to install it, there is no support for LabVIEW 2013.

  My question is, if there is a plan to include support OR DNET for LabVIEW 2013 or later in the game to pilot?

  I copied the directories vi.lib\DeviceNet and vi.lib\nidnet of LabVIEW 2011-2013 and I can load my programs without any problems. I always did not build an executable and does not run on the test set-up, but projects can be loaded in LabVIEW 2013 without any screws of brocken. should I expect any problems running LabVIEW 2013 with the NOR-DNET to 1.6.6 and 1.6.7 driver?

  Nick

  There should not be problems but it is a former pilot, we will not be updated for the future version of labview.

• Is LabVIEW 2015 for Mac?

  We have a license for LabVIEW 2015 and received the software on a USB Flash drive.  I have used successfully to install LabVIEW on my Windows PC, but am confused how to install LabVIEW on a Mac.  When we arrived LabVIEW on separate DVD, there was a DVD of MAC or Linux, but there is only this Flash drive.

  I searched through files and folders on this drive, looking for Mac and Linux.  The only Mac that I found was "MAComponents", which is a record for the Components Wizard of movement.  Similarly, references to Linux seem to be especially RIO LVRT related and.

  I called AND ask for help, but so far have not heard back.  I probably made a mistake in not making a formal request for Service, but the system was down for the day, I called...

  A Web search for a download for LabVIEW 2015 detects a lot of downloads of Windows, but even once, I don't (yet) found nothing for Mac.  I don't know miss me something (like 'just connect the Flash drive to a Mac, and it will "do the right thing") - I must confess that I did not (yet) experience that I just mentioned...

  Bob Schor

  http://FTP.NI.com/evaluation/LabVIEW/ekit/other/Downloader/LabVIEW2015-evaluation.dmg

  There is the assessment of 2015 for Mac.  I'm trying to find a Readme for this.  But I expect that it has only been tested on Yosemite and earlier versions

• LabVIEW 2015 SP1 missing palette for target touchpanel

  Hello

  I had an interesting problem for my installation of sp1 LabVIEW 2015.

  When I select a new project for a target of touchscreen, I don't get the palettes to add functions and commands.

  The palettes appear, but they are empty.  (Note that if the target is 'My Computer', everything works fine)

  After a lot of head scratches and research here, I found that there is a way to manually load the .mnu files to fill palettes.  All seemed well until what all I'm back have had a lot of icons with? in them.

  I then tried to install it on some other machines and they all worked well.

  Then, I discovered that when you choose a location to load the files .mnu, on my main pc, with the question, he kept pointing to a directory other than the one on my work pc...  I've searched and searched but cannot find where LabVIEW gets to this place.  All my paths are the default.  I even checked the registry keys (that I can find) and they are all ok also.

  So, I finished to cheat and copy the .mnu files in the path, its research and its working now.  I am not happy with that as its limit causing me problems if there are updates etc...

  My pc was looking for this path

  My work pc has been searching for this

  I'm guessing that my problem will be solved by resetting the locations by default of LabVIEW, but I can't find a way to do it.   I've done several uninstalls / reinstalls and no still no luck.  If anyone knows where these values are stored, so please let me know.

  Concerning

  Andy

  Hi Andreas,

  Thanks for the reply.

  I have now managed to solve my problem.

  It seems that one of my components labview has not activate properly when I applied the license key.

  I ended up asking another activation (via the online system) and it looks like its all working now.

  Not sure why LabVIEW behaved as he did, and why there is no indication of a license number.

  Very strange.

• Deploy file. DLL for CompactRIO with LabView

  Hello

  I have compiled a DLL-file of SimulationX, and I want to deploy this file on a CompactRIO with LabView. How do I do that?

  Thanks in advance

  A correction, the x 900 cRIO and 908 x seem to use an x 86 CPU and execution Pharlap ETS. PharLap ETS allows you to run SOME Windows but by far not all DLLs, because it supports only a subset of the Windows API available on Windows 2000. So, if you have a controller of 908 x cRIO (900 x are very old and unlikely to be used these days) you MAY be able to deploy the DLLS on your cRIO system. To make sure that you check the DLL API not supported importation by the auditor of the DLL which can be downloaded for your version of LabVIEW specific here.

• What type of support for labview usb protocols?

  Hello guys I want to connect a device to your pc via a usb port and I want to use labview to analyze the data.

  But first of all, I would like to know what usb protocols support for labview.

  USB, USB CDC and other TMC?

  I ve read labview recognizes a raw device to the usb, but what is? Is it VI to read and send data, or I have to do? If these VI exists, they do the handshake? flow control?

  Thank you.

  Please read the chips and have a look at the USB specification (it is linked to in the nuggets).

  TMC, CDC, MAss Storage are all built on the basic USB protocols.

  LabVIEW has no built-in support for one of these classes of devices except Test and measurement.

  Shane

• support for labview 2014 nidaqmx

  Looks like the last 9.9 niDAQmx is not support for Labview 2014. Any idea on where to download / expected eta for niDAQMX support for labview 2014?

  A new version of LabVIEW is generally released during the week OR (starting tomorrow). I guess, at the end of this week, at the latest, you will find all necessary drivers - including a new pilot DAQmx - ni.com.

  Kind regards, Jens

• Support for LabVIEW 2016

  Can someone tell me what VirtualBench drivers will be available for LabVIEW 2016?

  Release date is... right now! NOR-VirtualBench 16.0, with the help of LabVIEW 2016, is available here:

  • Driver 16.0.0 and NOR-VirtualBench Application

  (My apologies for yesterday, does not but it takes a little while to download pages to go live.)

• MATRIX Toolkit for LabVIEW 2012 for LEGO Mindstorms Installer?

  Hello

  

  Help, please

  Hi 40123157,

  MATRIX support is included in the competition MINDSTORMS Kit. Here you can find the box tool from last year: http://www.ni.com/download/labview-ftc-toolkit-2012-2013/4331/en/.

  An updated version of this tool for 2014-2015 aims to be released at the end of August.

• Problem setting Legacy DAQ board using NOR-DAQ 6.1 for Labview

  I know that the Board of Directors is an old legacy product not supported by NEITHER, however for a low-budget project, I have 3 of these AT-MIO-16 x cards and the need to use them.

  I know I got this job in the past not distant os, however, for the life of me can't get things sorted and work.

  You use a NT box, in which this configuration used to work... uninstalled and started fees for other reasons, and I can not get the NOR-DAQ 6.1 to support LAbview 6.1 or 7.1.

  Of course, I understand the OR-DAQ 6.1 should be used for Labview 5 and older, but also know this has been successfully done in the past.

  I downloaded all knowledge base articles dozed or both support and remember to use successfully the last time that I set up so I know not somehow it works.

  My configuration is: AT-MIO-16 X to the bus combo board (called work)

  NT PC

  LabVIEW 6.1 or 7.1

  NOR-DAQ 6.1 is the most recent to support this card.

  However, it will not install its support to its latest versions of Labview and I get errors, crashing, or missing files, when I followed various circumvention of knowledge base solutions.

  I was hoping that someone has a documentation somewhere how to handle this, because it really is a matrix of spaghetti.

  I can get NOR-DAQ support files installed, and Configuration Manager works well, finds the map and allows its parameters to be defined.

  But when I load the DAQ vi of any type, Labview accidents and the wizard of data acquisition channel does not work at all (no error).

  Thank you

  Yes, the installation program from the folder of disks for NOR-DAQ 6.1 on the ftp site has worked well.

  Workaround. Thank you

• Compilation of Xilinx not installed labview 2015 FPGA tools

  Hello

  I just installed Labview 2015 + FPGA Module on my computer with an older version of Labview 8.6.

  When I compile a labview FPGA project 2015 I got this error message "year error occurred while communicating with the server compilation" and warning "tools of Compilation of Xilinx not installed."

  I can assure you that my server of 2015 lunch perfectly and I installed everything correctly. I assure that it is a conflict between labview 8.6 and 2015 therefore uninstalled the older one.

  The problem is my build configuration is set to Xilinx 10.1 (which should be 14.7) and there is no way to change this.

  After looking around I found that Labview looking for best compilation tools then maybe this is not the problem

  Is there something I missed?

  Kind regards

  Hello

  I found the source of the problem. The FPGA, I used was based on a FPGA Virtex II matrix that is not compatible with this version of the build tools.

  Thanks for helping me!

• LabVIEW DSC 2015 with Labview 2015 64-bit

  Hi all

  I would like to know if it is possible to install the labview DSC 2015 with Labview 2015 64-bit module. When I run the Setup program, a message appears telling me to install Labview before installing the DSC Module. Maybe I need to install a 32-bit version of Labview? If anyone has an idea...

  Thanks for all,

  Alex,

  From the Readme of LabVIEW file:

  Supported modules

  LabVIEW 2015 (64 bit) supports only the NI Vision Development Module. Refer to the documentation of the Vision Development Module for more information. No additional modules support LabVIEW 2015 (64-bit).

  Looks like you need to run 32-bit LabVIEW.

  Bob Schor

• Found 0 results for my browser missing important elements, the menu..., whole tool bar drop down to print, copy, work offline, file, save, bookmarks, history. I just installed latest foxfire on windows xp. Found a few instructions, but they called in the

  Found 0 results for my browser missing important elements, the menu..., whole tool bar drop down to print, copy, work offline, file, save, bookmarks, history. I just installed latest foxfire on windows xp. Found a few instructions, but they called the keys of my computer does not have (key under OSX there no file, edit, history, help, tools, navigation, all the things that your directions say to use. Also, I'm still hanging and the message a scrip is running. I don't know what are the thises scripts but I of course don't need them.

  This has happened

  Each time Firefox opened

  == I just noticed it. It probably happened when I upgraded foxfire.

  Don't see the menu bar not (File, Edit, View, history, Favorites, tools, help)?
  Turn on/off the menu bar is a new feature in version 3.6.
  (Linux and OSX see: what happened to the file, edit and view menus? )
  Windows Method 1. Press and hold the key and press the letters of the following in this exact order: V T M
  Windows method 2 Press and release the button. The Menu bar is displayed; then choose ~ ~ red: V ~ ~ iew > ~ ~ red: T ~ ~ oolbars and click on ~ ~ Red: M ~ ~ enu Bar.
  The menu bar should now be displayed permanently, unless you turn it off again using view > toolbars. Check = not displayed, NO check mark is not displayed.
  See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing

  Navigation, bar toolbar bookmarks and other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).

  Mode full screen
  http://KB.mozillazine.org/netbooks#Full_screen

  See also:
  Back and front toolbar buttons or others are missing
  Customize controls, buttons, and Firefox toolbars

• upgrade to support/drivers of material for Pavilion dv8000t with Win 7

  Just upgraded my 2005 HP Pavilion dv8000t for Win 7 32 bit home premium.  Only XP was initially available, and now HP support will not recognize anything whatsoever to allow driver downloads.  Anyone else run into this?  Ideas, suggestions?

  Thank you very much

  Darth

  Hi, Darth:

  Use does not install drivers for the devices that update of windows Vista.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=1832444#N614

  If you cannot connect to the internet, please post the hardware ID's for Ethernet controller and network controller.

  I will guide you how to find the hardware for the network controller ID, and if you want, you can post the hardware ID's for all the missing devices, and I'll see what I can find.

  Go to Device Manager and click on the network controller needing drivers.

  Then click on the Details tab at the top of the control of the network window.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters that start with PCI\VEN

  If your model has a bluetooth radio, Vista driver will not work, so here's another model W7 bluetooth driver.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3357378&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_76382_1%257CswEnvOID%253D4052%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• NOR-Fieldpoint supported in Windows 7 and LabView 8.6

  We have a 'classic' with an ethernet controller FieldPoint system. We want to be able to read/write from/to the FieldPoint network using a computer with LabView 8.6 and Windows 7. NOR-FieldPoint is supported in LabView 8.6 and Windows 7?

  Kind regards

  Nate

  Hi natewkidd,

  I feel like some confusion between the operating systems running on a development computer (as Windows 7) and real-time operating systems that run on our real time (such as the PS-2000) controllers. I will do my best to clear up this confusion first answering your questions.

  (1) what is the difference between 2009 LabView real-time and LabView 2009?

  LabVIEW Real-time 2009 is actually a software officially known as 2009 LabVIEW Real-time which is installed after the LabVIEW 2009 development software to allow the user to develop and deploy applications in real time on targets in real time as your PS-2000. You can consider the LabVIEW Real-time 2009 almost as a plug-in for LabVIEW 2009 deployment and development of real-time applications.

  (2) if I have a PS-2000 on the ethernet network and to use a computer that is running Windows 7 and LabView 2009 for record and display data, will I still be able to communicate with the network FieldPoint screws write FieldPoint to my Windows 7 computer?

  If you go just to use the PS-2000 as a network module (NOT to deploy a real-time application to run on the PS 2000 itself), you should be able to communicate with him using just the read/write FieldPoint screw on your Windows 7 with LabVIEW 2009 machine and the driver NOR-FieldPoint 6.0.5. In this case, you actually do not need the Module Time since you do not deploy the application to the target in real time.

  About the PS-2000 unsupported beyond LabVIEW 8.5.1, is because the controller's memory is not large enough to hold the software that is installed on the controller with LabVIEW 8.6.x Module real-time and LabVIEW Real-time Module 2009. For more information on this, you can check this knowledge base article.

  I hope it's useful! Let me know if you have any other questions.

  Thanks for choosing National instruments.

  Aaron Peña

  National Instruments

  Technical sales engineer

  http://www.NI.com/support