Sounds or audio not audible in the system

Similar Questions

• (Redirected) Dell audio drivers will not load when the system is turned on for the first time after his stop.

  Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.

  Hi akilesh.sharma18,

  Please repost this in the Audio forum from the laptop to help.

  http://en.community.Dell.com/support-forums/laptop/f/3517

• you see a blank page because no audio device attached to the system

  When I open the realtek hd, he says you see a blank page because no audio device attached to the system. to activate the gui, connect an audio device to the system. It has been like this since that I restart my computer and I had my helmet on for any input but it's always the same here standing, someone at - it advice I can do? Thanks for any response.

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Wacom Cintiq 13HD - "a supported Tablet not found on the system."

  You just bought a 13HD Cintiq (no touching) and installed the drivers Wacom on my Macbook Air w / OS X 10.11.4. It works as a second screen, but I can't get the pen to do anything and when I look in the preferences system under the Wacom component I see nothing except a message stating "a supported tablet was not found on the system." I have installed the latest driver and two former previous drivers and restarted several times now. Any help?

  That's what I see in the system Pref Pane:

  

  Have you checked the forum Wacom for possible solutions?

• Portégé R700 - 15L - 3 G is not recognized by the system

  Hello

  I already bought this laptop and I have problem with 3G driver to work.

  I downloaded the latest drivers from the website, but the device was not recognized by the system?

  Any ideas how to fix?

  Best way to fix this is to install the original OS, you got with this portable Portege. Original recovery image contains all the necessary drivers and tools and utilities.

  When you use the FN + F8 key combination what options are available?

• iCloud library is not available if the system library is located on a network file server

  I moved my library on an external hard drive, that drive is directly connected to my router via the USB port.

  I can make pictures to my library of photos and pictures of charge very well. I've set the library to serve the library system:

  

  But, by selecting the option of using iCloud library gives me this error message "iCloud library is not available if the system library is located on a network file server.":

  

  I have the ability to connect this external hard drive to an iMac which is used as a server, I just prefer not, but if it's the only option I want.

  So in short, can I use this configuration? If so, why the error message and how to cope.

  Thanks in advance to all.

  That's right - the library needs (for iCLoud, use of the library and for the safe operation) to be on a local wired connection - may not be on a network connection

  LN

• HTTP: Error 58 (the network function is not supported by the system)

  Hi all

  I have a problem with HTTP Client in LV 2011 functions.

  As you can see in the screenshot attached, I try just:

  -Open a handle-> no errors

  -Send a web request using the GET method-> error 58

  -close the handle

  The problem is that a 58 error: "the network function is not supported by the system. However, it works fine when I type the same URL in a web browser.

  You have any idea of what could be the problem? Thank you in advance for your help!

  J.

  I have fixed the bug: there was a white at the beginning of the URL... (!!!). I deleted the empty character and now it's OK.

• Portable CQ58, disk recovery "this computer is not supported by the system recovery media.

  Hello HP,.

  I have a laptop CQ58-bf9WM, which had Windows 8.1.  The 320 GB hard drive died and bought a new SATA 500 GB laptop.  had no CD recovery, went online, enter all the important information, serial No., model #, then purchased through HP recovery disk, received the CD (manufacturer 708896-001, 708895-001 708897-001) and put #1 disc in the CD started and that's what I get: this computer is not supported by the system recovery media.  You will not be able to continue to recover this system with these media.  "Error: 0100-169-1855-188 b" then you have the OK, then when you press OK, the laptop shuts down.  I pressed ESC on POST, then I tested memory and the new hard drive and they both passed.  HELP PLEASE!  Thank you

  Should not have anything to do with the new hard-both disk that is at least equal or greater than original ability, they work. It is 'possible' that you have received the wrong set of recovery.

  Thing of OE to check. Enter the BIOS by pressing F10 immediately after turning on (have to press ESC, then F10 to the menu). Is the serial number, model number.etc all intact?

• Trying to enable and disable the scheduled tasks back but becomes "the name of the specified task * does not exist in the system.

  I am trying to create a .bat file that stops a set of scheduled tasks and start another game, but when it works it is said that there is no such thing as the name of the task

  SCHTASKS/Change/disable /TN ImageCopyTest
  ERROR: The name of the specified job 'ImageCopyTest' does not exist in the system.

  Running schtasks/query does not list the tasks that I have implemented in Task Scheduler

  For operational reasons, the tasks are set on "Run If the user is logged in or not ' and I read somewhere that this automatically makes the hidden task

  Can someone shed light on how I can get around what I need this operation for our recovery after disaster

  It's on Windows Server 2008 R2 Enterprise

  Hello

  Apologize for the delay in response. Because the question you posted is related to Windows Server and more complex than that which are usually dealt with here, this issue will be safer in our MSDN forums that cater to the more THIS professional audience.

  Thank you.

• NI LabVIEW driver for the SRS DS345 function generator generates error "(Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system."

  Hello

  We have a generator function SRS DS345.

  I just downloaded the driver NOR for the instrument on http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9149659CE034080020E748....

  After installation, the DS345 appears in MAX, and I can well communicate with him.

  However, if I run the srds345 to Started.vi, I get an error "location information insufficient (Hex 0xBFFF0011) or the device or resource is not present in the system" from initialize it with Options.vi srds345 sub - vi.

  The only change I did Exchange address GPIB 14 to 19, which is our function generator GPIB address. In addition, the

  Functions of SRS DS345 generator of function palette is empty, even after you restart LabVIEW (see attachment). I'm using LabVIEW 8.5.1.

  Your help in resolving this issue is appreciated. Thank you.

  Best regards

  Peter

  Have you installed the driver from LabVIEW or copied directly from inst.lib?

  The first is easier, and you don't have to restart LV more...

  Error in a not filled gpib address points. I have not checked if this driver has a resource name visa or a string of gpib address old but in the first case, try the little triangle on the right at the slect address instead of by hand.

• "The expected Version of the product is not found on the system" error message during the Installation of Service Pack 1

  I got the error message 'the expected version of the product was not found on the system' when I was installing Microsoft Office Professional 2003 Enterprise Edition (Microsoft Office Outlook 2003 with updated business contact to update Manager) Service Pack 1. I wonder that someone has a solution to resolve this error message. Your help is greatly appreciated.

  Jim

  You cannot install Office 2003 Service Pack 1 when overview of InfoPath 2003 Service Pack 1 is installed

  If which are not related to the situation, suggest it ask you for help by the experts of the Officeinstallation, modernization, and activating Microsoft Office products Forum.

  MowGreen Services update - consumer safety

• Cannot install KB982331 KB981715 & KB982312 "the expected version of the product is not found on the system.

  I have the Compatibility Pack installed so that I can open .docx files of type 2007 etc.  Apparently the updates of Windows 'think' I have Office 2007 if updates following KB982331, KB981715 and KB982312 are queued to be installed, but they are unable to install it because I have not Office 2007 is installed.

  When I try to install the tool in stand-alone via the following links

  KB982331

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en

  KB981715

  http://support.Microsoft.com/kb/981715 and select download package now.

  KB982312

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=6deb4fb0-CBFC-40DF-8F62-35fa1db0e167&displaylang=en

  I get an error correctly indicating that "the expected version of the product is not found on the system.  So they will never install successfully but Windows Update won't jump that updates are not necessary.

  Does anyone know how to remove these updates to install?

  Thank you

  Chuck

  Support of Microsoft's solution was to uninstall the Office 2007 Compatibility Pack.   I chose to ignore the updates and keep the ability to view Office 2007 extensions.

  In addition, contact the support does not count as a solution, especially when the problem is not resolved by the project "fix."

• "The expected Version of the product is not found on the system" error message during the Installation of Service Pack 3

  During the installation of Microsoft Service Pack 3, I get the message "The expected Version of the product is not found on the system."

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Downloads of SP3: -.

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  How do you know if you are running a 32 bit / X 86 or 64-bit computer

  1. Click Start.

  2. Do right click my computer and then click Properties.

     • If you don't see "x 64 Edition" in the list, then you are running 32-bit Windows XP.

     • If "x 64 Edition" is listed under system, you are running the 64 bit version of Windows XP.

• File are not accessible by the system

  There is, I had restored my computer using suite recovery of my computer.  I backup all before starting the process.  After when the process was done and I had everybody works very well, I went to remove my files of backup for the space, but I have a really stubborn file/folder.  I'm going to remove it and I get a message saying that the file is not accessible by the system.  From there, I tried going through safe mode to delete, taking possession of the records, using prompt command to remove and even using Unlocker.  None of these methods was able to remove this darn folder.  Now, I don't know what to do next.  If unlocker failed to remove the folder, then I don't think that there many options remain outside to wipe the drive.  and it's something I don't want to do.  So, I ask, what should I do next?

  Picture of the Error Message

  Photo of properties of "folders".

  Hi ShoaJo,

  Error code 14, you can see the article mentioned and check.

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  I hope this helps.

• Output video HDMI to the TV is fine, but audio not transferred to the TV

  HP G60-440US Notebook PC, Windows 7 32-bit. Laptop connected to LED TV via HDMI cable. Video output from the laptop to the Tv is perfect, but the sound is in the laptop speakers (NO SOUND OUTPUT OF TV). The play sound icon does not appear on the click with the right button on the VOLUME in playback devices. I've updated all the possible drivers and BIOS. Help, please

  Thank you

  Hello

  Check the document below:

  Connect a TV or monitor to your Windows 7 PC using HDMI