Source monitor empty when reloading my project

Similar Questions

• can not see the wave forms when dragging clips in the source monitor

  I'm editing interviews where images and the original sound has been grouped in merged clips or sequences. I love the source monitor editing in the timeline, so I drag the sequence in the monitor source from the location of the project. From there, I can see and hear the movie without problem. However, when I mark the starting points and insert the images into a new sequence (my own assembly), there is none of the waveforms. In the source monitor itself, if I change the Audio waveform display, there seems to be none of the waveforms here either. Its strange, because first of all, I can hear the audio, and secondly, if I open the original sequence in the timeline panel by double-clicking it, instead of in the source monitor, dragging in there, then I can see the audio waveforms very well... Sounds strange... that the program if not just showing the waveforms for sequences if they are in the source monitor?

  Any ideas would be a massive help.

  (this is CC, 2014, with the Canon 5 d footage and Wav audio files recorded separately)

  Thank you!

  Thank you all for your advice.

  I really discovered what seems to be the cause of the problem. In the sequence, there is a blank audio track for a reason any. When I delete the sequence and then drag this sequence in the source monitor, BEHOLD, I still see forms audio waveform. No idea why it shows one track empty when it IS... Weird.

• When I stop playing, the source monitor goes black. It does not show a still image after pausing.

  I just got a HP Prodesktop 400 G1 MT, Intel core I7 processor. In first 8 adobe, when I stop the video playback, the source monitor and program monitor won't give me a fixed image. As soon as the video is stopped, the screen is empty while normally, they would be in a freeze frame. the computer has an AMD radeon graphics card. I have two pc for dual monitors. I tried to play with the settings of reading to the premier, but no luck. I'm about to take the computer to be recovered. Any suggestions?

  Hello! Thank you for responding. I'm currently doing an update for my AMD display driver, and it is up to date. I called tech support and they helped me in the question of fixing from the option menu file - rendered video - general - project settings and playback - selecting mercury playback engine software only option. My computer was set to the GPU acceleration engine. It works fine now. Thanks.Aldo

• My monitor pane and preview source are empty

  I PPro CS6 (6.05) on a PC with Windows 7-64.  I installed body on a new laptop about 6 months ago and use this configuration since install.  Today when I started a project, both the source monitor and preview screen are blank.  In other words, when I try to add something in the source monitor, there is no video.  If I move the video and audio to the timeline, I see the horizontal bars for video and audio.  When I scrub through the timeline, I can hear the audio, but there is no video in the preview pane.

  Also, when I export the video, I get the export settings window that opens and I can see the video in this window, and the finished (in MP4 format) video shows the video perfectly.

  I've changed a setting or is there something else?

  Re-install.

  The Adobe Creative Cloud Cleaner tool allows to solve installation problems

• How to empty my Source monitor?

  Hello, I work with lots of photos and use the project window as a way to organize a story-board and display my photos in the source monitor to check I'm going. Sometimes, he does not display the photo more and stays on the last screen. Then I realized that if I'm looking for the Source monitor Panel under the header 'Window' (it will list the main headers at the top of my workspace all photos that I opened in! with the done current TIC TAC on.) So I guess I need to empty because it is full... I asked the question in a different way to the community in the field of research, but he has not returned nothing so I hope that someone here will have the answer for me.  I guess I could use the other program to the storyboard ("I forgot what it's called!) but I try to stick with what I know! Oh I got 'Bridge', but I still know. Thank you for any input :)

  You should have an option to close all the menu drop down.

• CC15 crashes when audio bug - fast shuttle the source monitor

  So, with the latest version of first CC15 (2015.0.1), when I have images in the source monitor Panel with any audio other than on the stereo and I quick-shuttle forward or backward, I have an accident with this crash report:

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Adobe first Pro.exe

  Application version: 9.0.1.36

  Application timestamp: 55acd8dd

  Fault Module name: AudioRenderer.dll

  Fault Module Version: 9.0.1.36

  Timestamp of Module error: 55acb6fe

  Exception code: c0000005

  Exception offset: 000000000001f8cc

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 4105

  Additional information 1: f7bd

  More information 2: f7bde30bbb93e21ad58fc5293b02f73d

  3 more information: 6f86

  Additional information 4: 6f8697bd2fc5361900645287eebcf52f

  It is clearly audio related, that doesn't happen with the stereo clips and the failure is AudioRenderer.dll. I've submitted a bug report, encourage others to do the same if they can reproduce this problem.

  Someone encountered this or have a fix?

  Hi RM,.

  Someone encountered this or have a fix?

  I apologize on behalf of Adobe for this question. Please update for first Pro CC 2015.0.2 (9.0.2). The solution is in the update.

  Thank you
  Kevin

• Monitor is white empty when you try to view the video full screen on youtube.

  I have a HP w2207h screen flat monitor. When I try to view online, such as YouTube videos, full screen, the screen goes to a blank white screen. Sound works, no picture. However, when I view the same video from YouTube in Internet explore everything works fine. Is there a setting that I need to solve this problem? Would appreciate your help!

  Try disabling hardware acceleration in Flash Player.

  See the videos in Flash will not play in full screen

  Blink the window "display settings":

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/help01.html

• Cannot read sequences in the Source monitor

  Hi all, this morning I met a problem that I've never seen before, and I can't find discussions about this anywhere. I use CS6 first to edit a feature-length documentary, and the images amounts to approximately 715 concerts, I'm storing them on a disc of RAIDed 3TO. I worked on the project for the last week or so with no problems, but today whenever I try to open the clips in the source monitor interview, I get the yellow screen "Media pending". Timecode was audio parts sometimes independent, sometimes it just runs silently. Sometimes the images begin to play, sometimes the right source monitor panel turns green and is sitting there during the execution of the timecode. I opened another project to see if the question was to the system-wide, and reading worked very well there. THEN, when I came back in the doc project, opening clips in the source monitor opens the wrong clips, and then it started to open the clips of the other project, I had just tested. I'm supposed to have a meeting with the client tomorrow, and I am at a total loss. I tried to clean the media cache, I reloaded the program, I rebooted the computer, nothing did. Sometimes, video clips start to play and work for about 30 seconds and then I move the partition and everything freezes again. In addition, the program stops to respond at the slightest provocation, just right click on a clip to get its properties caused the program stops responding.

  I'm under Premiere Pro CS6, windows 7 x 64

  16 GB of RAM

  HDD SEARCHED with 655 GB free of 1.81 to

  NVIDIA GeForce GTX Graphics Card 680

  The images vary. It's all 1920 x 1080 @ 23.976 fps, some is videos .mp4 mpeg with an aspect ratio of 1.0 and the rest is files .mov mpeg digital SLR with an aspect ratio of 1.0.

  If I am not to provide certain information, please let me know, and any help is greatly appreciated!

  Will be

  UPDATE: now any read's wobbling or slow. I tried dragging the clips in the timeline to extract only the bits that I need right now, and my the program monitor just turned black while the audio ran under

  UPDATE 2: I thought I might have a problem of memory, so I bought more RAM, up to 32 GB now, does not resolve the issue. A user of CreativeCow recommended to save my files to preview on my desk. Did this, no help. I pulled a few clips (about 40 minutes) on the timeline to see if I can make it out and extract of what I need. No luck, the rendering is running quickly for a minute or two and then slows down to an image every 5 to 30 seconds. Rendering of images in the same timeline plays very well, but nothing works in my source monitor, nothing is non-rendus works in my calendar. I'm at a total loss and 4 days late now. Any help would be massively appreciated

  Hey Kevin, thanks for getting back to me. Unfortunately, none of these solutions worked for more than a few minutes. Honestly, I could just be overloading my system. I need to make the updates anyway. I migrated the project of a new super workstation to which I have access, and it seems to work well so far. It is unfortunate that I can't work from home, but the project is on track, that's all that matters.

  Will be

• Could not get the Source monitor and program to display together

  Hi, I use Premiere Pro constantly for about 6 or 7 years and have never had problems with the monitors Source and program appearing side by side in my workspace.  I've recently updated to CC and, in addition to having one monitor 'fixed' and a sudden 'floating' (I've unable to paste the two up, but would have a run on my second monitor) it was working OK. The last two days, I can't set both monitors. I double click on a clip in the project, and it is not displayed anywhere.

  My preference is to set the workspace to imitate CS5.5, but this option is sorting is no longer the problem.  I'm trying to go back to the previous workspace and it tells me that there is not.  I tried control boxes and uncheck the menu window. Any help would be appreciated.

  

  Source monitor can normally be added to any 'panel' by clicking on the Panel, then in the menu dropdown you show, by clicking on the Source monitor... then navigate to it by selecting the tab is in the Panel that was highlighted when you clicked.

  You can change the panels by "entering" a title as source or scopes or whatnot too and drag in or to another palette, with the possibility of having always appear (for example, if you then release in the area left highlighted a Panel, you drag in) to the left of other things in the control panel... or if you say leave in the Middle then it displays when you select the tab at the top of the Panel. Others cover it when you click on the tabs. I think that the help pages following (they aren't long) could you get:

  Use and customize workspaces in Premiere Pro

  Working with panels in Premiere Pro

  Using the Source program monitor in Premiere Pro

  Things have changed a lot since 5.5...

  Neil

• new mac pro 6 core 64 GB of RAM: reading late 4K files timeline and source monitor

  Here is my speed.  not that I understand all the details of this test, but it seems relatively quickly.

  I experience lag during playback of 4 K, the monitor source or online images of scene.  in other words, when I hit play it takes half a second to one second to read.  Once he plays, he has no problem.

  deselection of video keyframes, remove all unused audio tracks (3 cam project) does not help.  Once a clip plays back (and it reads without problems as I said), when you can come back at the beginning of the clip (up arrow), he rereads - i.e. begins once again - no lag.  in the scenario, let's say you chop a 20 minute interview (ok, in detail: each element seems to be 05:51 long and about 5 GB, h264 - must be an automatic feature on the camera in terms of storage - in other words, no large files of 20 GB or whatever it is)-so when you this chop into smaller pieces, when you then go further down the same hashed clip It is delayed once again.  even if it is the same file on the computer.  then return to the where it did not delay initially, this part now shifts again.

  When I put the 1080 p prores files in the project, fast lighting everything.  (I'm talking to navigate and manipulate items in the editing or even source monitor Panel.  I'm not talking rendering and output.  "I think it works very well.)  I'm at the limit of whats possible with my machine and the sequences of 4K with PP?  This is the format?  intuition and several years of experience tell me whatever it is 422 still works perfectly but nothing h264 will always be even the fastest machine to work so hard.  right?  evil?

  PP CC was last updated

  El capitan (guilty?)

  today work with 5400 1 speed 4 thunderbolt to drive rocketstor toaster.  not insanely fast, but as I said, once I got the game on a clip I already hit play previously, it works without lag.  So how is it possible?  What is this feature that makes this place?  There seems to be things loading in the bg who then are responsible - and when you place this specific element to the following, even if both refer to the same file, you have this lag again.  between the second half and second complete.  I exported a file of 5K h264 in a different project and the computer, finder, quicktime etc has no questions immediately play it back.  What gives?

  any ideas?  I thought that a machine of $5K don't experience any lag really.  No I don't want to throw money to solve the problem, but you know what I mean.

  Thank you!

  Michael

  PS: I just checked one of my files to QuickTime.  Yes, here also a half second delay on the play button.  not powerful enough system for reading 4K flawless?  are my criteria for impeccable speed on computer too high?

  

  

  Post edited by: michael freund

  Throw 4 k on a timeline dramatically ups the flow required for EVERYTHING on the computer. Understand, that for 'typical' UHD (1920 x 1080) as I work with, my pc is a 4-core i7 (8 "virtual"... Yes, whatever) 3.5 Ghz (2 cores overclocked as which proved faster in operation), 32 GB of RAM (RAM frequency has been changed too), GTX970 / 4 GB vRAM for graphics.

  I have a decent drive in this machine... Setup but put most of the things PrPro on a WIDE, material faster striped RAID-0 would work as well or better.

  -: Twin 250GB SSD in RAID 0 for speed system, used for the OS & programs ONLY;

  -250GB SSD for the system cache and cache/database files also PrPro;

  -Disk internal 500 GB at 10 000 rpm, previews; (kept fairly clean, less than a third full)

  -Disk internal 3 TB, project files;

  -Internal drive 2 TB, media files; (maintained below 50%)

  -Internal drive 2 TB, exports.

  This extends to the work of in/out/cache disk so it is not slow things down, and so the CPU can be better used. I do stuff test & family here, keep the media on a PNY 128 GB flash, read-only drive so the USB3 who is fast enough.

  Other things, such as documents & upload files, storage general file, is on other players. This keeps all the foregoing, including the system drive, pretty skinny and good working condition.

  The newest Samsung T1/T3 external SSD drives have been tested for incredibly fast work flow, much more than other readers USB3.

  And of course, the internal drives m.2 must amazing flow.

  It is a system of 'balanced', having enough of every bit of available material nothing stacks up this CPU.

  Then... you can watch your disk configuration. You may need a higher throughput...

  Neil

• using the iMac 5 K and BM IO - source monitor changing 25 p 50 p causing black between the source and the program 4 s

  Reading in the source organization IMac 5 K using Blackmagic IO outputs 25 p 50 p monitor

  The effect is black as monitor re sync when I switch between 25 p 4 seconds the program monitor and hardware 25 p in the source monitor. Occurs on iMac 5K not MacBookPro.

  This happens with:

  Images 25 p in F5 Sony MXF DALYS and

  25 p DALY mxf op1a export agency

  Reading in the Source monitor is reported as 50 p BM Office video and monitor.

  A sequence created by dragging clips to create (so matching 25 p DALYS) reports it as 25PsF in BM (and so in 50i by monitor)

  Change the interpretation of the attached to the interlaced 30 frame can result in 60i and then adjusting to 25 fps may result in 50i, but this appears inconsistent.

  It's on an IMac 5 K use pilot 10.6.4 with El Capitan to CC2015.2 and day to day.

  This problem occurs both Ultrastudio 4 K and MiniMonitor (the reduced MiniMonitor the 50 p to 720/25 p

  The problem ONLY is NO PRODUCT with the same project/media/drivers/software/e/s on a MacBookPro.

  I don't know if it means a bug in the driver of the ORGANIZATION or the World Bank.

  Thanks for any help or the confirmation or not of this problem on a similar facility

  OK - after that the support of a lot of help from the world BANK has been fixed by trashing preferences (I used preference - Digital Rebellion Manager))

• Transmit mercury only shows the program, not the source monitor monitor

  Hello people,

  For some time now, I have this problem where only the signal from the program monitor is sent to my external monitor. The source monitor working within first on my computer monitors, but will not playback on my external monitor. It is in each project unique im working on and I find it very difficult to identify the problem. It won't work when I drag a clip from a location to the source monitor or make a match frame of the timeline. I would add also that sometimes, but not everytime, when the program monitor transmits very well and I do a double click on a clip in the tray or drag it to the source monitor, my external monitor goes black. This also happens when you do a correspondence framework. And to add another weird thing, the audio is being transmitted by the source monitor. First pro audio is routed through my external monitor. I can just hear end during playback of clips in the source monitor. It's just the video that will not be displayed on my screen.

  
  

  My hardware is just simple Quicktime mov with ProRes in them in 1920 x 1080 so nothing special.

  I have the latest version of first and my driver for the monitor of Blackmagic Mini is also updated.

  I'm open to suggestions!

  Thank you!

  I think I solved my problem.  After a lot of troubleshooting, we ransacked the Premiere Pro preferences (hold down shift + option while launching the first) and the source has been restored.  Or my preferences were corrupt, or else my system has been set up in the reading panels and Audio hardware preferences.

  Unfortunately, after a few days the reading of the source monitor went out again.  I trashed my preferences again and reading has been restored.  I'm still trying to understand why this has happened.

  To answer your questions.  I am using a monitor.  He has worked with AJA Kona, but we recently went to Blackmagic so that we can use to Resolve.  I do not know if yes or no the Blackmagic was initially working right, but I don't think it was.  I got stuck on a large project, it was a few months before I could make a test or troubleshooting.

  I hope this helps!

• Different sizes of resolution between the Source monitor and program monitor

  Hi guys!

  Newbie here-sorry in advance. The size of resolution replaces my source monitor monitor of the program to the point where its very large in the program monitor and the image stays that way when exporting... What I am doing wrong?

  If all the clips are from the same camera, you make a new sequence that is correct, then put all your clips in it and change. You are simply based on this first clip sequence settings to lay the foundations for your project.

  If you have snippets of a few different types, such as 1080 p and 720 p, then you must decide on a workflow that suits your needs. If the final result must be distributed to 1080 p, you high-end 720 p content, but end result must be 720 p, better off to reduce the content in 1080 p. It depends on different factors.

  Thank you

  Jeff

• Audio waveform disappears from the Source monitor after opening another audio clip

  I use Premiere Pro CC 2015 on an iMac (late 2014) of new 27-inch Retina 5 k with 8 GB of RAM.

  I've got 5 takes of the same voice that I'm editing into a simple video "How-to" recorded at the screen. I'm pass between the clamps and picking at the take, that I prefer and move it into the timeline.

  Problem is, once I open an audio file and then pass away from him to another audio file in the monitor Source Panel, the waveforms on this clip will not appear when I open it in the Source monitor. See waveforms is a unique case, unless I restart Premiere Pro. I can still hear everything and I still see the playhead moving across a green screen, but the waveforms are gone. It works fine the first time I open the clip.

  I waited about 10-15 minutes to see if it's just to take a second to reload the waveforms, but none of the clips appear in their new waveforms unless I restart the first. I tried to open a video and then come back to an audio clip. I have actually managed to do come back simply by moving the source monitor Panel in its own window separate from the table of mixing, effects, etc. but it happened again the next time I went to another audio clip and no amount of monitor source is fluttering it don't come back.

  Is there something that I am missing? I can still change course by listening to each piece of the voice-over begins, but without seeing it, it's a real pain.

  I think that this has been fixed with the latest update. No more problems!

• Reset the Source monitor timeline

  When the claws come out my camera and are placed on the timeline, the time does not start to 00:00:00:00 but that ever time the camera placed on the clip.  Is there a way (or a workaround) to redefine the time in the Source monitor to 00:00:00:00?

  PS. I know how to put my camera at the start of a shooting at 00:00:00:00, but it is impossible to switch several times to the 00:00:00:00 during a 20 minute session fast movement.

  You can right-click a file in the project Panel and change the timecode to start at all times as you want.