SPA9000 Setup problem with FXS ports

Similar Questions

• Satellite C650 problem with USB ports

  Hello

  I have a problem with my laptop, with my USB ports.

  A few days ago, I plugged my mp3 to charge its battery. I did when system Windows began and after a few ports seconds has stopped working. They work for one to five minutes after starting my computer, but only after my laptop's turn off for a few hours at night for example.

  They work fine and all of a sudden we hear the sound of a disconnected device and usb ports turns off. I tried many solutions but nothing worked. I removed all the USB ports in Device Manager.

  I checked in the BIOS, but everything seems to be okay. I tried to disable the disconnection of usb ports to save energy, nothing. Tools that have been provided by Toshiba to check hardware see as usb ports work correctly. Only usbdview program sees as unknown device, I tried to uninstall it through this program but still nothing.

  You have an idea, what could happen? Or if there is no possibility to fix without service visit?
  I would appreciate your help.

  Hello

  Have you tested these ports USB plug a USB mouse or a USB keyboard?
  These devices work properly?

  I don t think you need a visit to the service.
  I think that it s just a software problem
  Given that the USB ports are controlled by the chipset, I would recommend reinstalling/updating the chipset driver

  The alternative is a bit drastic, I think about the recovery of the laptop...
  It might be possible that the registry has been confused upward or some 3rd party software preinstalled on the laptop could affect the USB ports.

  I remember that my USB ports do not work after installing iTunes.
  I had to reinstall the operating system once more to get the USB port work even more funny is that I installed iTunes once more and USB worked correctly

• PROBLEM WITH USB PORT

  I HAD PROBLEM WITH MY (USB) PORTS... WHEN I CONNECT DEVICES WITH MY COMPUTER, IT SHOWS THAT THIS MOTTO IS NOT RECOGNIZABLE TRY SOME OTHER CONNECTION FEATURES... I CHECK MY DEVICE MANAGER AND HIS WATCH THAT THE DEVICES WORKED PROPERLY I WASN'T THE PROBLEM, IT IS... HELP PLZ

  Simple method is to unplug all your usb device, turn off your system (power off) press the power for 5 seconds (while it is turned off), then turn on your system. Leave the window and then try to connect your USB device one by one... Should be detected and installed, if necessary.

• Window vista xps 420 problem with USB ports.

  I have problems with window vista dell xps 420 machine, all USB ports are not recognized, unless the computer is restarted or rebooted. anyone has a suggestion.

  Hi Miguelsmith,

  1. When did you start to question?

  2. you remember to make changes to the computer recently?

  You can uninstall and reinstall all USB device manager entries and check if it helps.

  a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  You can also consult the following article:

  Tips for solving problems of USB devices

  Hope this information is useful.

• problem with the ports of the two SLM2048

  Hello:
  I have a problem with two models of SLM2048.
  I only as configured in these devices was 4 VLAN and link aggregation port between these devices.
  I detect some Don t work ports (I connect to a workstation in the port and the Don t upward, but in the other port if upward)
  Could be a hardware failure? or maybe the switch block these ports?
  Best regards

  I'm not sure that I fully understand your port problems.  Is this a failure of single port or you have a problem of end-to-end between ports on two different switches?

  Andrew Lissitz

• Just bought Wndows Vista and having problems with the port for Palm 125

  I just bought a Windows Vista-based computer and have problems with getting my 125 Palm to synchronize with the desktop computer.  I get an error message saying: "No available Com1" what should I do?

  Thank you

  Frustrated

  Don't ask me the procedures step by step that I did, but I finally success!  I uninstalled Palm Desktop and started from scratch.  I unplugged the Hot Sync cradle by the USB port, then I installed Palm Desktop from my drive and then update Palm Desktop on the Palm for Palm M125 site.  It still does not, I manually added a port and manually changed to COM1.  I then pressed the Hot Sync button and in the Device Manager, a folder has become available "device named" with Palm Desktop as a subfolder.  It is always active, I updated my computer for Palm USB driver.  Miraculously it worked.  Thanks for your help, but as usual everything it needed, it was patience and trial and error to solve the problem, since it does not seem to be a quick fix related this topic.

  Message relates to: Palm m125

• Problems with the port replicator USB 2.0 after installing Windows XP - SP2

  Hello world

  I have a Satellite M30 742 with MS-Windows XP Professional installed. I plugged most of my external devices to him through a port replicator Toshiba USB 2.0. Everything seems to work fine until I installed Service Pack 2.

  Therefore, starting my laptop computer is an adventure to recognize random port replicator: usually four USB ports are recognized, but the ports series and parallel, keyboard and mouse ports are ignored, with a message "unknown USB device".

  Uninstalling and reinstalling, them or their drivers are a vain effort, since Windows keep ignoring them.

  However, in other occasions, they are recognized without problems (even if windows insist on installing their drivers each time that it finds, even if I have already installed a large number of times).

  Please, you have an idea to solve this problem * boring * problem?

  Thank you very much in advance,
  Ricardo.

  Hello

  what you might try is to reinstall the chipset driver because I think that the USB is connected to the chipset.

  In my opinion the Windows upgrade had changed the pilot USB from Toshiba a MS a. So the Port Replicator is not recognized all the time.

  Rudi Bye

• Problem with USB port and touchpad satellite A135-S2386

  Welcome!

  Laptop Satellite A135 in Houston, I bought about a year ago, it was working fine until last Friday. All my USB ports stoped working. I have power to the usb ports, but Windows Vista recognize any tool that is connected to the computer. Only what I get is USB is not recognized, or something like that. The same situation is under Linux (ETCH Deiban), the USB ports does not.

  Another thing is touchpad. It does not at all, regardless of it's Linux or Windows. Stoped working in Sunday.
  I used the cd recorvery and reinstall Vista, but the problems still exist.

  Please tell me what to do with this problem.

  See you soon

  Hello

  If the problem persists after using the original recovery media is certainly hardware related issue. I recommend you contact the nearest authorized service provider. They check your laptop.
  Sorry, but I really don't think you can do it alone to solve this problem.

• Problem with opening port (pat)

  Hello

  I am trying to open port 80 (www) on my pix and send all queries to my internal web server (192.168.0.150)

  I'm currently running Pix V 5.1 (5) on a classic old pix (stable)

  I'm not having much luck opening the port.

  I have 200.220.230.136/29 assigned to me

  Here's my ip address

  Router LAN: 200.220.230.137

  WAN Firewall: 200.220.230.138

  NAT firewall: 200.220.230.139

  LAN Firewall: 192.168.0.252

  I think the problem I have is with the static command.

  If someone could please take a look at my config and give me any advice on where I might be wrong, it would be a great help

  Thank you

  Clint

  PIX Version 5.1 (5)

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  access-list 101 permit ip 192.168.0.0 255.255.255.0 any

  access-list 101 permit tcp any host 192.168.0.150 eq www

  access-list 100 permit tcp any host 192.168.0.150 eq www

  access-list 100 permit icmp any any echo response

  access-list 100 permit icmp any one time exceed

  access-list 100 permit everything all unreachable icmp

  interface ethernet0 car

  Auto interface ethernet1

  Outside 1500 MTU

  Within 1500 MTU

  IP outdoor 200.220.230.138 255.255.255.248

  IP address inside 192.168.0.252 255.255.255.0

  ARP timeout 14400

  Global 1 200.220.230.139 (outside)

  NAT (inside) 1 192.168.0.0 255.255.255.0 0 0

  public static 200.220.230.142 (Interior, exterior) 192.168.0.150 netmask 255.255.255.255 0 0

  Access-group 100 in external interface

  Access-group 101 in the interface inside

  Route outside 0.0.0.0 0.0.0.0 200.220.230.137 1

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  No sysopt route dnat

  I think your 100 access list should look like this.

  access-list 100 permit tcp any host 200.220.230.142 eq www

• Problems with HDMI Port 3/4 on Toshiba 46xv733

  HY everybody,

  When I try to connect a device (PC, Xbox, or PS4) HDMI1 or HDMI2 (where everything is fine) for HDMI3 or HDMI4 I can't make them work properly. Resolution passes something a cable not only 30 Hz. When I try to change the resolution (on PC) the photo does not match the screen (for large or too small).

  I searched throu the documentation and the Web but can't find info HDMI3/HDMI4 are different from HDMI1/HDMI2.

  The TV is Toshiba 46xv733.

  Any suggestion on how to solve this problem would be highly appreciated.

  Thanks in advance

  Hello

  In [User Guide | http://www.toshiba-om.net/LCD/PDF/English/XV733-32374046-English.pdf] you can find some information that certain HDMI devices at the beginning may not work properly with your latest HDMI TV due to the adaptation of a new standard.

  In this case you must unplug your HDMI cable first, and then try the two options settings. INSTAPORT content type and turn off.
  You start HDMI source should work with your TV.

  The HDMI 3 seems to be a little different from the HDMI 1 and 2.
  3 HDMI supports digital and analog sound.
  HDMI 1 / 2 / 4 supports digital audio ONLY.

  The HDMI 3 must be used in order to receive sound from a PC connected (via HDMI to DVI cable).

• Problem with switch ports linksys 5 (EZXs55w)

  Recently, I upgraded my internet from DSL to cable. While using the connection DSL my 5 switch port has worked perfectly fine. Since going with cable, I can't connect my other computer or xbox 360 to my network. I get a message on the computer that will not connect say limited or no connectivity. Any help would be appreciated thanks in advance.

  As you have changed your ISP from DSL to cable, this option will not work with the cable ISP. Buy a router (wired or wireless router) to do your multiple computers to go online with your cable ISP.

• HP Envy 17-k207na: problem with lan port even when installation of official drivers...

  I downloaded the driver from Realtek LAN (LAN) fromthis site and always when plug you my cable to the pc it says limited conectivit that I tried on another pc with cable it works internet. -.-

  Hello:

  Try the driver directly from Realtek.  a 4th on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• Problems with the Display Mode target on end 2009 27 "iMac

  Used late 2009 iMac 27 "in the view target in conjunction with a Dell XPS tower with i7 processor, Windows 7 and the best graphics card I could afford at the time connected by HDMI to mini display port cable.  Worked well for years.  Set aside Dell for a few months and the update of the iMac to El Capitan OS 10.11.3.  Recently tried old setup with same Dell PC and was able to move from Mac to PC, but the PC screen resolution was at the lowest setting. I got an error message when enabling/disabling to PC who said there was a problem with the port causing mini display of the system back to the lowest resolution. Impossible to reset at a higher resolution.

  I tested the Dell PC on another monitor, and it works very well at higher resolution (2560 X 1440). Now, when I reconnected it to the iMac (which works fine), the screen becomes black.

  Is it possible that the operating system upgraded (El Capitan) is not compatible with the targets using mini display port Display Mode?  Any ideas?

  Use your iMac as a display with the target - Apple Support Display Mode , also consider having a bad cable or connection. Does not hurt to try different cables, they can and will the bad!

• Satellite M70-190 - problem with USB

  Hello!
  After you uninstall Windows XP and BIOS update, I have a problem with the USB ports. My work does ' t of USB flash drive. Windows also find a USB flash drive, but I can't find it in "my computer".
  If anyone idea about this problem?
  PS, External HARD drive works perfectly, as the USB mouse and USB WiMax modem.
  I m hoping someone out there can help with this problem.

  If I understand you well you don't have problem with USB port, but with a single USB device. Right?

• problem with the ghostery Setup Wizard - it starts every time

  The ghostery Setup Wizard starts each time I start firefox android. Each time, I manually close all my tabs, but they are all jut come immediately again when I restart firefox.
  I don't have this problem with my desktop, Win XP. I also ghostery ext on my XP with no problem.
  I ONLY WANT A FIREFOX PAGE WHITE when I start!
  Thank you!

  LeGregox: I'm sorry, but I do not understand your question.

  Maybe you should ask people Ghostery support?

  https://getsatisfaction.com/Ghostery