problem with the ports of the two SLM2048

Similar Questions

• Problems with the two Flash/Shockwave

  I have problems with both Flash and Shockwave players. I went to the help pages for both of these players and I followed all of the suggestions that they had players not playing not even if they are installed. I have ActiveX enabled in Internet properties, security software is not in any way afilliated with this problem, which leaves me with being puzzled and frustrated. I hope you guys can help out me if possible, anyway. Also, when I try to reinstall Flash and Shockwave, flash "installed successfully" two videos do not appear.
  
  I say well, the possibility of an accidental uninstallment of two plugins not too long could have led to this problem.
  
  Thank you.

  Here is the awnser to your prob... anoying * http://home.att.net/~sjesme/ of hell

• Problem with the two factor authentication with Apple TV.

  I tried to connect to my Apple TV (2nd generation, operating system and updates are up-to-date), log-in failed and indicated that I had to use two-factor authentication which I recently install on my trust Apple devices which included my iMac, iPhone and iPad. As expected, I received a notice on my Apple devices trust with the verification code to six figures to add this code to six figures at the end of my password when signing in the Apple TV. I put my password and add the code check digit at the end on my password. It did not work. Now I can not connect. Any suggestions to connect to Apple TV using 2nd generation two-factor authentication? This Apple TV device is not supported?

  There is model of Apple TV MC572LL/A with Apple TV software version 6.2.1

  Model identifier is AppleTV2, 1

  Model number is A1378

  People have been facing difficulties with this process. I have not encountered such difficulties then have not had the opportunity to test solutions. While a little pain can I suggest that you disable temporarily two authentication step until you have set up your Apple TV.

• Problem with the two EA DEVELOPER SQL DATA MODELING 3.0.0.665 and 3.1

  I created a model of very large data using SQL Developer data 3.0.0.665 and 3.1 EA maker. Its having a lot of check constraints. Whenever I am the design of the fence and the DOF and reopening export to import the DDL file failure to import completely check constraints. It is important to check constraints, but without any range of values inside. Its very frustrating because whenever you open import ddl, you must manually add again all the details of data check range constraint.
  
  OS: Windows XP.
  Check in the two EA Developer SQL Data Modeler 3.0.0.665 and 3.1
  
  -------------------------------------------
  Here are the contents of the .dmd file.
  -------------------------------------------
  * <? XML version = "1.0" encoding = "UTF - 8"? > *.
  * < OSDM_Design class = "oracle.dbtools.crest.model.design.Design" name = 'Admin_Panel' id = "9BE18B0A-6C67-2E5B-00DE-BD8312189ECB" version = "3.41" > * "
  * < createdBy > administrator < / createdBy > *.
  * < Createduserid > 2011-10-17 08:32:18 UTC < / Createduserid > *.
  * < Admin_Panel ownerDesignName > < / ownerDesignName > *.
  * < false capitalNames > < / capitalNames > *.
  * < designId > 9BE18B0A-6C67-2E5B-00DE-BD8312189ECB < / designId > *.
  * < / OSDM_Design > *.
  
  -------------------------------------------------------------------------------
  An example how the check constraints to get dirty.
  -------------------------------------------------------------------------------
  Initial check constraint is as below:
  ======================
  ALTER TABLE test_table
  ADD CONSTRAINT Active_Flag_ck
  CHECK (Active_Flag IN ('A', 'I'))
  *;*
  
  Below how it occurs once I have imported the ddl and re-export:
  ============================================
  ALTER TABLE test_table
  ADD CONSTRAINT Active_Flag_ck
  (CHECK)
  *;*
  
  I'm in trouble as I already in the middle of the my development using SQL Developer Data Modeler.
  
  Please help me soon.
  
  Jean

  Hi John,.

  Every time I'm fence design and export the ddl and reopening through the import of the DDL file

  Why are you doing this? Once the DDL file is imported and then save the drawing and open simply saved design, no need to generate the DDL and import it every time that you start Modeler data.
  On the list of values - forced as this CHECK (Active_Flag IN ('A', 'I')) are imported as constraint check plain and not as a list of values.
  There are the more specific elements import of check constraint - they are defined as type database constraint that you select during the import. Accordingly if you import your DOF as Oracle 10 g DDL, then you will get forced correct check in DDL generated for Oracle 10 g and Oracle 11 g. Constraint of evil will be generated for Oracle 9i. You can move the constraint for Oracle 9i (in the check constraint dialog box) or generic if it can be treated as such constraint.

  I logged for DOF bad bug.

  Philippe

• Date problem with the two documents.

  Hi friends,
  
  I have the table and have two columns EFFECTIVE_START_DATE and EFFECTIVE_END_DATE.
  
  Problem is I have some records of empooyee wise line and two resulting recordings gap which cannot be traceout.
  
  
  E_CODE EFFECTIVE_START_DATE EFFECTIVE_END_DATE PREVIOUS_COE
  10620 12 July 10 COMPANIES
  10620 17 / sep / 09-30 November 09 CORPORATE
  10620 19 November 07 31 January 08 CORPORATE
  
  I want to create a view that will give me the whole same table except Effective_Start_date and Effective_End_date. Files in the sample are shown in the table below.
  
  Fact is I don't have the current record in the table as shown in the table below, but I have to get this recods with force in the view.i must take care of EFFECTIVE_END_DATE must be-1 the next EFFECTIVE_START_DATE
  
  E_CODE EFFECTIVE_START_DATE EFFECTIVE_END_DATE PREVIOUS_COE
  10620 1 December 10 COMPANIES
  10620 1 February 09 30 November 09 CORPORATE
  10620 19 November 07 31 January 08 CORPORATE
  
  Please let me know is it possible to approach this one or should I think otherwise.
  
  Thank you
  Bachan.

  Bah,.

  The snippet of does'nt of Lee station have hard-coded values, it was just an easy way to select by using the sample values that you provided.

  I created a table with query select Lee & then creates a view for her...

  CREATE table tbl_test
  as SELECT e_code,
         effective_start_date,
         effective_end_date,
         previous_coe
  FROM
  (SELECT 10620 e_code, TO_DATE('12-Jul-2010') effective_start_date, NULL effective_end_date, 'CORPORATE' previous_coe FROM dual UNION ALL
   SELECT 10620, TO_DATE('17-Sep-2009'), TO_DATE('30-Nov-09'), 'CORPORATE' FROM dual UNION ALL
   SELECT 10620, TO_DATE('19-Nov-2007'), TO_DATE('31-Jan-08'), 'CORPORATE' FROM dual UNION ALL
   SELECT 10650, TO_DATE('14-May-2010'), NULL, 'SALES' FROM dual UNION ALL
   SELECT 10650, TO_DATE('11-Mar-2007'), TO_DATE('31-Jul-08'), 'SALES' FROM dual);
  
  create or replace view vw_tbl_test
  as
  select e_code,
         NVL(LEAD(effective_end_date) OVER (ORDER BY e_code, effective_start_date DESC) + 1, effective_start_date),
         effective_end_date,
         previous_coe
  from tbl_test;
  

  Hope that is clear or can be I got you wrong.

• Re: Satellite C650 - problem with the devices connected to USB ports

  Hello

  Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?

  The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.

  The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
  Thanks in advance

  Sorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...

  Post edited by: leahhw123

  Hello

  What happens with plug n play like USB mouse device?
  You are able to use an external USB mouse correctly?

  > but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
  I guess this could be a problem with the software or drivers installed.

  I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.

  In addition, you can try to install this software once more, check whether this USB problem appears again.

• I'm having a problem with the FireFox browser. I have attached two files that describe the problem. I have marked their A &amp; B. A is the way it should lo

  I'm having a problem with the FireFox browser. I have attached two files that describe the problem. I have marked their A & B. A is how it should look like and B what happens once I have, I opened several tabs. I can get it back to normal if I click VIEW, click Customize. When the window customize appears that Firefox returns to its normal state. I have to click on the done button and go back to what I did. I tried to reset FireFox back to the default settings, but that has not fixed the problem.
  It started happening a month. Is there a way I can fix this? Thanks for your help. I don't know how to fix my 2 attachments that shows the problem I'm having.
  [email address removed to protect your privacy and security]

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• Two problems with the registry and Aero

  1. so I just follow the instructions on the Microsoft page at http://support.microsoft.com/kb/947215 on how to fix the error "the user profile service has no logon. I executer run in Safe Mode, follow the instructions in method 1, reboot and it worked again. After that things return to normal, I open the directory in the registry editor to see if anything changes. And Yes, because when I start Safe Mode and open the registry editor, I don't see that a file ends with .bak, however there are two. Is this a problem?

  
  2 I do not know if this has happened recently or a while back on my computer (the one with the same problem above), since I just noticed it. Usually on my other laptops, all the windows around is a 'border' like this:
  
  But some of the windows now appear when, will be absent this "frontier". Here are some examples:
      
    
  The above image (the stop a job), a border. But it is thin, and on the left side, there is more of a 'border' as the right and down side.
  

  I don't know what happened, but is there a way to solve this problem, because it does not concern normal like other computers?

  Thanks for any help.

  1. as long as you don't face any problems with the registration on your account, it is not a problem.

  2. Please run Microsoft Fixit from the following links and:
  http://support.Microsoft.com/mats/aero_effects_not_working/en-us
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us
  http://support.Microsoft.com/mats/Windows_Display_Quality_Diagnostics/en-us
  If the problem persists, answer here.

• 3 laptops different ALL been facing intermittent problems with the USB ports.

  We have 3 laptops at home, running 3 different versions of winsows 7... Home, Professional and Ultimate. They have in recent months ALL given intermittent problems with the USB ports. A device that worked on a port stops working. It may or may not work on another port. A week later it could very well lead again on the port that wouldn't work. This applies to all types of devices.

  A few more questions:

  Is there a USB device that you use with all three computers?

  This problem occurs with all kinds of USB devices?

  The is the problem with all the USB ports on each laptop?

  Have you tried to reinstall the USB drivers? As in, uninstall via the Device Manager, restart your PC and allowing Windows to reinstall?

• I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because that box "email".

  I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because the 'email' box keep rejecting their email address valid. And I just tried to remove the line in my form and it does not allow me to delete or to mark it as not necessary either.

  Currently, there is no way around the field email forms of the Muse. Another option is to have a look at Jotforms or another third-party provider of shape that Muse has widgets for.

• the problem with the wi - fi does not work on windows 8.1

  Hello dear forum users (sorry for the English, use a translator)

  I have a laptop HP Pavilion dv6-7055er, 8.1 Windows 64-bit

  Card Broadcom WiFi 802.11b/g/n 1 x 1 4313GN worked on windows 7, but fails on windows 8.1. Tried to find the driver on the broadcom , but not found. Device Manager indicates that the problem with a PCI device. Specifies no problems with the Wi - Fi adapter.

  What could be the cause and how to fix it? Thank you!

  It seems that your WIFI adapter is not supported by Windows 8.1

  There are a few options available.

  The first and simplest is to purchase a USB wifi adapter to plug into one of the USB ports on the laptop. I have a dual ASUS USB-AC56 band that meets the 802.11ac specification.

  The second option will be to take a look at the installed optional wifi adapters to see if they have Windows 8.1 supports, buy one to replace the Broadcom card installed with.

  Ok. The two following adapters are compatible with your laptop and Windows 8.1. They have a BIOS support.

  The Qualcomm Atheros AR9485

  The Intel Centrino Advanced - N 6230 WLAN module

• Problems with the resource of labview execution 2 visa

  I use two loops in a labview code all-in - connects to a motor controller and other is used to connect to a multimeter agilent. As soon as I run this VI, the loop to connect to the controller stop working and only used to configure agilent machine works. If I remove the second loop (connecting to the computer of agilent), the code works fine. I guess it's a problem with the execution priority. Could you please review the attached code and let me know any problems with it.

  COM1 and Com3 share an interruption.

  Go to the BIOS of the computer and set the port to Com3 to the Com2 port, then they will be on their own interrupt and see if that helps.

  FYI

  COM1 and Com3 share IRQ3

  COM2 and Com4 share IRQ4

• Having the problem with the function on SG300 Dhcp / 500?

  Having the problem with the function on SG300 Dhcp / 500? now I can use the dhcp server on the two model, but have a problem.

  My problem is when I create

  VLAN 1: 192.168.0.1/24 dhcp pool 192.168.0.10 - 250

  VLAN 10: 192.168.10.10 - 250 192.168.10.1/24 dhcp pool

  case 1

  I plug the pc to vlan 1 can I get ip 192.168.0.11. But when I change this pc to a new port in vlan 2 I always get the same ip address. why I can not get IP of vlan2.

  case 1

  I plug the pc to vlan 2 I can get ip 192.168.10.11. But when I change this pc to a new port in the vlan 1 I always get the same ip address. why I can not get IP of vlan1.

  but when I have access to the switch and remove the link after that that i will get correct IP.

  I think this is the bug of this firmware. Could you help this case.

  This is a known bug that is the setting of Cisco

  Sent by Cisco Support technique iPad App

• When I try to play a game online a page appears saying certifcate theres a problem with the security of websites and it will not connect to yahoo messenger

  Im trying to sign on a MSN chat game when I do a page appears saying that there is a problem with the security certificate from the Web site.

  It gives you three choices

  leave the Web site

  continue to this website (not recommended)

  more imformation

  When I click on continue he don't go to the game it won't let me play and a page comes up saying (open ports)

  also when I try to log in to yahoo Messenger, a message pops up saying

  We cannot connect to yahoo messenger

  then he gives me a choice of output or troubleshooting

  When I use troubleshooting, it is said that there could be a problem with your internet connection

  I have listed these two items because they were both working at the same time now their not.

  Any site, I try to get shows this message cerificate

  I did a scan on my computer and it says (fichier-\device\mfeavfk01.sys) (masked driver infection)

  so im collecting it is all related to the same problem

  Hello

  1. what browser you use to play games online?

  2. If you are using Internet explorer, version of Internet explore you use?

  Method 1:

  If you use Internet Explorer, I also suggest you to see link and check.

  "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site

  http://support.Microsoft.com/kb/931850

  Method 2:

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  If you are facing any issue links to the yahoo Messenger, I suggest you to contact yahoo messenger support forums and check.

  http://help.Yahoo.com/communities/index?page=forums

• strange problem with the database link

  Hello world
  
  I have a strange problem with the link of database in Oracle 11 g Express Edition;
  There are two computers: computer-server and the client computer. Tnsnames.ora are the same on both computers IE.
  
  CT =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
  )
  (CONNECT_DATA = (SERVICE_NAME = XE)
  )
  )
  
  I created the database link:
  
  Create database link zdalny
  Connect to < user_id > identified by < password >
  using "CT".
  
  Customer cannot connect with server when I do not use above the command. But when I change 'use' for using "krzysztof:1521" or by using "krzysztof" or "server IP:1521" - everything is ok.
  
  Why I ask. Because in all the materials that I read about Oracle command with the help of "CT" should work correct. But there is no. Do you know why?
  
  Thanks in advance and apologize me for my English.
  
  Rgds
  Krzysztof

  Here's the tnsnames of your server, but to connect to the oracle server db (any client or to another instance of db oracle), you must install oracle client.
  However, in your condition, you want to connect the DB1 Oracle OracleDB2 using a link db, I'm right? In this case you should always set the entry in the tnsnames.ora
  To verify that you can connect to Oracle DB2 from DB1 Oracle, you can use tnsping in the command line.
  In your case

  c:\tnsping CT
  

  Krzysztof Szymaniak wrote: CT =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = XE)
  )
  )

  Check your tnsnames entry in the machine, you are trying to connect to. And check if the tnsping is successful.
  Sometimes the error message says not everything, which means that you need to troubleshoot yourself and learn from the experience.
  Always in the opposite case, refer to the documentation.

  See you soon.

  Published by: Spongebob December 14, 2011 09:30