Space at the top of the screen when the window enlarged

Similar Questions

• StackPane not to fill the available space in the window

  Hi all!
  
  I am facing a problem when you try to resize (even just filling) additional space on a window with a 'structured' node
  
  Explain:
  
  I use this framework to manage several scenes: https://blogs.oracle.com/acaicedo/entry/managing_multiple_screens_in_javafx1
  It works fine, but I am not able of to the 'internal' node expand to fill the entire window. I am able to set min width and height to reach the limits of the window, but I would like to set to the mode "full screen" to the node and let the JavaFX do the trick. Is this possible?
  
  I have attached an image to help the explanation. Basically what I want, it's fill the green zone (controlled Screene that extends StackPane) with blue/pink (Gridpane with bottomAnchor = "0.0" AnchorPane.leftAnchor = "0.0" AnchorPane.rightAnchor ="0.0"AnchorPane.topAnchor = "0.0") node.
  I already tried to extend the framework to the node Anchorpane class but did not work.
  
  Please follow this link to the image:
  https://DL.dropboxusercontent.com/u/25373134/screen.PNG
  
  TKS in advance!
  André Castro

  Looking at the blog you linked, there is the following code:

  Group root = new Group();
  root.getChildren().addAll(mainContainer);
  Scene scene = new Scene(root); 
  

  It's probably the cause of your problem.
  A group is not a resizable pane, so it does not develop to adapt to its surroundings.
  Trying to root a StackPane instead and see if that works.

  StackPane root = new StackPane();
  root.getChildren().addAll(mainContainer);
  Scene scene = new Scene(root); 
  

  If this does not solve your problem, please post the full content of the file FXML you use and use a harness to test you app to display.

• HP Split x 2: not enough space for the Windows 10 update

  I have a Split of HP x 2 (64 GB SSD, drive hard 500 GB) running Windows 10.  I recently received notification of an update of Windows 10 version 1511, 10586.  Trying to install the update, I get an error message saying that Windows needs more space on C:, specifically 8.13 additional GB.

  Settings Windows reports 58.9 gb of 59.2 GB already used on C: which is 47.2 GB ' system and reserved.

  The update program says that I can use another drive for the update and I tried the built in D: (more than 200 GB free) and an external drive (900 GB free), but the update will fail with the same message outside a slight reduction in the amount required on C: (7.17 GB) of free space.

  I had already cleaned useless all the files using the Windows disk clean and have less than 6 GB in applications and data, in order to get rid of everything that would still runs.

  All GB 47.2 OS is really necessary?  Any large pieces I can get rid of, or is the only way an SSD upgrade?

  PeSke

  Only in the last day or two, MS has eliminated a new update of Win10 who, claim, addresses the problems of people said that they do not have enough disk space for the Nov 10 update and when they provide you with an external hard drive, it will not use it.

  I suggest that you are looking for updates and see if it is applied and then retry the update 10 Nov.

  Good luck

• virus from consumption of space in the "WINDOWS" folder

  Hey guys please help me... My local disk c is to have space 0. Its because of a folder named windows... When I click with the button straight on the record & clicked on properties he showed 18 released GB 19 GB... Then I clicked on windows, I selected all files & den clicked on properties he showed only 4 GB is taken... I think there is a virus in the file my antivirus avira name can't detect is... i also used combofix & I got the JOURNAL. TXT file... Please help me... & I get a coz of recovery console windows system that my portable dvd player no longer works...

  Google Chrome can create large files as it indexes your research. It could be that the program is not suitable for use on your computer.

  http://www.google.co.uk/search?q=Google+Chrome+Indexing&hl=en&num=10&lr=&ft=i&cr=&safe=images&tbs=qdr%3Ay,qdr:y#pq=+chrome+indexing&hl=en&cp=27&gs_id=1a&xhr=t&q=+Chrome+Indexing+Disk+Space&pf=p&sclient=psy&lr=&tbs=qdr:y&source=hp&pbx=1&oq=+Chrome+Indexing+Disk+Space&aq=f&aqi=&aql=&gs_sm=&gs_upl=&bav=on.2,or.r_gc.r_pw.&fp=a19bed4caca36660&biw=893&bih=492

• Free disk space in the Windows Explorer status bar.

  In Windows 7, I wonder how to display disk space is free in the Windows Explorer. In XP, you could see how much space was free down in the status bar. He would say how objects and disk space that was free. How can I activate this in Windows 7?

  Return to the root that particular drive is annoying, when I should be able to see how much free space I have for any folder.

  Thank you.

  These 2 features have been removed from the latest version of windows and really help to speed up the use of every day:

  Display the amount of free space
  Display of the total size of the files in folders.

  How this two features can be added to the status bar?

• Inactive space in the window of brush presets

  It is a very unusual thing. I decided to re - install photoshop, but when I opened it, the control panel preselections of brush on the right has a very weird space under the slider of brush size that I can't do anything with. When I switch on I get sort of a do not enter sign. Clicking on it does not help, and the window closing and reopening it don't work either. It's right here too much room and it really kills me. I can't find anything related to this, but someone has an idea what it is?

  

  But have you used the brush and changed the tip of the brush a couple of times?  My gut feeling is that this isn't the problem, because even if there is "recent" brushes to display, it should still be a ready for when there are empty window.  I would definitely check the permissions, but if there is a problem it will not for general preferences because they save OK, but check the path to the other presets.

• Bootcamp lost after the new partition (try to increase disk space for the window)

  I have Version OS X El Capitan 10.11.2. Here are the details on my system.

  

  So I tried to increase the space in the partition for the training camp by using disk utility. I created the new partition. But now I can't bootcamp while I restart the computer and hold down the option key. I tried this in the terminal:

  sudo fdisk e/dev/disk0

  p

  setpid 4

  07

  Pavilion 4

  p

  writing or w (tried both)

  There

  But it does not seem to pick up my bootcamp windows. I also tried to restore the mac as early date of backup via external hard drive, but that doesn't seem to help either.

  Here is the screenshot of the output. Any help would be appreciated. Thank you.

  

  Can you post the output of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• White screen when loading Windows

  original title: white screen

  When I turned on my computer all I got was a white screen, (I don't know even how I got here!).  I have no toolbar, no start button, etc.  Help!

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Dell Inspiron M5030 black screen when installing Windows 8.1 on 'Get Ready devices.

  Dell Inspiron M5030

  I had Windows 7 installed and works perfectly, but I wanted to install Windows 8.1, I tried a new install first (also tried to upgrade to windows 7). Everything installs fine but when it restarts for the first time the windows logo appears and 'Getting devices % ready' then the screen goes black.

  Ive tried:
  -For let sits for awhile to see if it comes back, and I get nothing after hours
  -J' plugged a monitor without response (also tried to close the cover put to sleep and go to bed)
  -J' quit and tried to start in Safe Mode, but it says that Windows cannot boot mode safe because windows setup has not finished

  I can start on my windows repair and go to the recovery prompt but don't know what to do. It looks like a video driver issue, the laptop has an AMD Radeon HD 4200. If thers any why to install the driver before implementation ready devices? Help, please!

  I had the same problem and did this and it worked without problems... The idea is to integrate the drivers updated in the ISO/DVD. The drivers supplied with the W8.1 DVD do not work as well as I was getting the BSOD with the installation.

  1. download Winreducer and install all the 3rd party software that it requires.  Look in the howto.pdf

  2. download the latest AMD Catalyst drivers from AMD website (not beta).  Drivers Windows 8, I think that the list.

  3. extract the files to temp dir.

  4 copy files and drivers since the temp (packages\drivers\display\w86a_inf) directory and the sub (B149756) to the dir dir drivers winreducer (work\integrate\drivers\x64).  In the x 64 dir, you should have cats, msi, INF and the b149756 files.

  5. run winreducer.  Make sure you have practice an iso to DVD Windows 8.1.

  6. Once you mount your iso, you will spend for options and features screen.  You can see the presets, appearance, features... on top.   Let alone all the options EXCEPT the location of the drivers under System.  Change this to x\WORK\INTEGRATE\DRIVERS\x64.  Don't forget to change the x to your location.

  7. click on finish.  Save as an iso. Apply.  It will save the iso changed in the winreducer folder.

  8 burn and install.

  9. After you are done installing, install the driver package that you downloaded in step 2 by running setup.exe in the main dir.

  10 thank me LOL

  It worked for me on an Inspiron M5030.  I hope that my answer is detailed enough.

• White space in the Windows 7 Task Scheduler

  I noticed a whitespace in Task Scheduler when it will be launched with the mode full screen

  

  However, when it is "expanded" to a tiny screen (restore down), white space is not present

  Edit: Looks like the 'problem' is present with large screens.  I tried connecting my laptop to my monitor and then start the Task Manager. The same result is displayed.

  I was able to reproduce white space as you have indicated.

  I have never seen since I rarely close a window full-screen.

  I don't know what is the cause.

• Low disk space on the Windows XP computer.

  Original title: clean C disk, compress files.

  I'm low disk space and need to Defrag. When I clean disc - the same 2-,-is still there. No matter what I do, I always only 7.1% of free space on my C drive. How can I get more space?

  Hello

  What is you receive the exact error message?

  You can follow this link & check if the problem persists:

  How to recover space on Windows Server 2008 and Windows XP computers?

  
  Reference: forty ways to free disk space

  Hope the helps of information.

• Since version 18.0.0, Firefox regularly replace some parts of my screen when it is enlarged but not active (Outlook or Word); is there any solution for this?

  Any time I can get Firefox enlarged but not active (so it is behind another active window / application) on Windows XP Pro SP3, it regularly replace significant portions of my screen. If I move the mouse, type, scroll up/down or anything to change the screen, the active application is slowly starting to appear. For example, in Office 2007, when this happens, I can continue typing a sentence in Word or Outlook and this line is displayed, but the rest of the message area displays remnants of Firefox. If I move the mouse along the Ribbon of Office, it will be displayed in pieces are the reached mouse. This problem has been held regularly since the version 18.0.0 and persists in 18.0.1. I prefer not to minimize Firefox so I can move conveniently via Alt - Tab from Firefox and the other application, in that I work, but this problem that is almost impossible. FYI, when I'm in Firefox, no other pop application on top, not other applications show otherwise, so I know that the problem is caused by Firefox and/or interaction weird with the new version and installed plugins, drivers or other software.

  Could you try to disable graphics hardware acceleration? (I have trouble determining your "more system information" if it is enabled or disabled). As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You need to restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Orange Firefox button or classic menu Tools > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  If you restart Firefox, the problem is solved?

• Blank Screen when start Windows normally

  original title: white screen

  I can only run Vista in Mode without failure. When I run normally, I get a blank with a slider screen once I connect. Any suggestions?

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

• Satellite A210-151: black screen when changing Windows

  Hi people,

  and another question, mainly to check if there is a bug already known.

  Suddenly, the screen goes black and the laptop freezes without any responses on strikes. This happened about four times in the last eight weeks, and the only action I can attribute this behavior is to change from one window to another, or to open a new window in Vista (pre-installed version of Toshiba).

  I have problems to work with some applications, however, especially Wings3D what all doesn t start. It is most likely a problem of display driver, but Toshiba s, last date is may, old version of catalyst), and of course original ATI drivers can't be installed on the machines. Or does anyone know a work around for this kind of problem?

  Michael

  Hello Michael

  Sorry to ask but is Wings 3D designed to run under Vista OS?

  Any display questions is not easy to talk much, but to be honest, I can't imagine, it comes up with the clean operating system preinstalled. I guess this is the result of the customization of the operating system.

• Not enough space on the data store

  I created a VM w2k8 server. I have attached a second virtual drive to it in the vsphere client determined I gave him too much space. I went back in the vshere client and click on delete. Now, when I go to add a second drive with the right amount of space I want t use I get error not enough space on the data store. I noticed that the old file vdmk still exist but do not know how to proceed. It is a 5 ESX environment and the data store is on the SAN. Space on the windows server is listed as unallocated.

  Hello and welcome to the community of VMware. Well I would like to browse the data store and make sure that there are no vmdk files sitting here that, if the other wise not to be there. Have a go at this and feedback your conclusions.

  Best wishes.