Speakers Altec Lansing has stopped working, the helmet works OK (Touchsmart tm2-2102TU)

Similar Questions

• My speakers Altec Lansing ADA745 will work with my 530 s the new Dell Inspiron PC?

  My speakers Altec Lansing ADA745 will work with my 530 s the new Dell Inspiron PC?

  I watched updates of the audio driver for my pc and am not sure which one I need or you can even use it.

  Although "4.1" speaker systems are very common, the ADA745 should work without problems on a new system.  I have no connection to the ADA745 info but I guess it would connect everything as you are currently connected to the old PC.  New systems PC audio supports up to 7.1 speaker (with the most common 2.1 or 5.1) systems.  There is no drivers for speakers, however, you need to define the types of speakers in the control panel (e.g. article 4.1, and if this isn't an option, try the 5.1 and see if works well).   Printed with the new PC installation worksheet should detail the audio connections and if not, there is a copy of the Dell manual loaded on your PC and it has the details on the back panel connections.

  In Vista, the sound control panel is accessible by Start/Control Panel/hardware and sound/Sound.

• Façade has stopped working properly on the Qosmio X 300/305

  Greetings and thanks for reading,

  I had my computer not a week ago and since then, I had some problems, especially with a blue screen when I hit the FN key. Research on the problem, I disabled services of Toshiba and eventually found the culprit: hwsetup.exe. Manual execution crashed my computer and it still doesn't work. However, after you install a new version of it, it seems that FN is working fine now. Hwsetup running always breaks the computer well.
  Any ideas what may cause this? The computer is new, so I don't see what I could have done to cause this situation myself.

  Now to the following problem: it seems that the façade has stopped working correctly, the touch of the keys that allow you to launch the application Dolby, the webcam application and also turn on and off the red lights on the keyboard. When I click on the touch keys, all I get is the tone of the speakers, but nothing happens. I guess I have disabled something by mistake. Any thoughts?

  I would be grateful any entry immensely, people, so please share your theories with me. It is such a thin laptop and I can sleep now, it's difficult to to cause these problems... ridiculous, Yes, but I want everything to be perfect because I spent so much money.

  Best regards
  Johan

  Hello

  > I can't install the flash card value as well as the utility driver package. It's actually the cause of the blue FN screens. I'm really lost here.
  First of all, you should check if the BIOS version you are using is the most recent.
  If this isn't the case, update the BIOS.
  Then, you must install the utility to Support Flash Cards because this utility is necessary, to get other utility Toshiba works.

  Then install the added value package because it contains the Driver TOSHIBA components common that is an essential component of Windows Vista. He will have to make the other original programming TOSHIBA works correctly.
  It also contains the TOSHIBA Flash Cards tool that provides Hotkey function and function of pitcher who starts the keyboard shortcut function and sends the other TOSHIBA utilities.

  If the BSOD will always appear that it is advisable to recover the operating system

• Skype has stopped working, several times a day, especially after the hibernation of the BONE

  Until recently, I used Skype 6.0 without problem (the latest version had a bug that when headphones are plugged in, headphones and speakers were performing simultaneously), but I was required to go through an email about group conversations. Since then I am fumbling with Skype blocking ("Skype has stopped working") without any obvious reason (Skype in the background), especially once I wake Windows hibernation.

  I use Windows 7 64-bit. The exception is 0xc0000005 and its offset 0x011666fe.

  I naturally use the version 6.14, have a BONE perfectly patched with drivers up-to-date, tried several restarts but also uninstall and reinstall and do not use compatibility mode.

  What exactly the offset of the exception said about the problems I encountered with?

  Offset of the exception is the address in the memory of the computer where this 'exception' appeared. Exception 0xc0000005 code means "access violation". There are very little chance anyone will tell you exactly what is happening at that particular memory address. Generally, the debugging process is by trial and error. In some cases the question may be due to corruption of the Skype configuration files.

• Headset Bluetooth connected to the PC, but has stopped working.

  I recently bought a Bluetooth hands-free headset, with the intention to use it for my PC and Playstation 3. It took me a while to find a way to connect it correctly, but I managed to put in place and both the speaker and the microphone worked perfectly. However, when I moved my Bluetooth adapter to another USB port and reconnected my headphones, the speaker has stopped working. It was not broken, because he was still working on my PS3, but it did not play all the sounds from my computer. I would go to control panel > sound and I would be with the right button of the headset and click 'test', it would have displayed on my screen as if he were playing, but no sound came through the speaker. The microphone was still working, and I don't really use the speaker, so I didn't really like. However, I recently connected an controller to my PC as a game controller, and I installed the wrong drivers while my card is always connected. I uninstalled the drivers and later installed good, Bluetooth had stopped working on my PC, so I rebooted, plugged the adapter in, active Bluetooth etc, and I was able to reconnect my helmet. However, now the microphone has stopped working as well. I tried to use "Microsoft Fix It", and when I would try to help out the speaker or microphone, he told me to turn on my camera, then it is already enabled, and I wouldn't be able to do anything.

  Hi sexualharrasmentpanda,

  Please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/2fdc6964-78f6-468F-98c2-a1a9c7ffadce

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• "Share" feature in the Finder (or other applications) has stopped working.

  Use OS X El Capitan on a Mac Book Pro, the function in the Finder (or other applications) has stopped working "share."  From the Finder, I select a file and to 'Share', select say "Mail", nothing happens. Even when selecting other sharing options such as 'Notes', etc.  He used to work.  Now it is not.  In system preferences > Extensions all the sharing options are regularly controlled.  The same problem occurs in other applications such as Photos.  Selection of a photo and trying to "share."  Nothing happens, the application crashes. Does anyone have a solution?

  The Share button shows 'No. Service' or missing menu items?

  https://support.Apple.com/en-us/HT203129

  If this does not help, backup the computer and reinstall OS X El Capitan of OS X Recovery.

  https://support.Apple.com/en-us/HT204904

• How to make the new version, I just installed as the old work that has stopped working?

  I used Thunderbird for many years and have always been very satisfied.

  A few days earlier, he has stopped working on my computer. I think that this was due to an update of AVG Free 2015. (When I restarted after the automatic update, Tbird and Chrome and Firefox broke everything. AVG has since been removed and replaced with Avast. Chrome and Firefox, both work very well after I installed the latest versions.) I took the opportunity to get the latest version of Tbird (I was 37) and installed it. TBird is OK, but the operation is a total disaster!

  He used to see me just like the user. Now I have to choose my Inbox by clicking, and then open it in a new tab. I could accept this pain if things worked OK. The first email that I click appears in the message pane. But I can't delete it unless I double click to open in a new tab! I can not get the following message to be displayed in the messages pane. It's used to work if I simply clicked on the message.

  How can I make Tbird work as he did? I used to love, now I hate it! Please help me before I dump Tbird and switch to Gmail!

  Thanks for any help.

      -jim
  

  And it still works like that for me.

  First define your default account
  Account settings, mark your account, thoroughly open stock account and 'set as default '.

  To see how it works

• After installing the update tabs 26.0 fox has stopped working

  I have Windows 7 on both of my computers. After updating firefox to 26 my tabs fox has stopped working. It shows that it is enabled, but I get a white screen. I can't edit or save all Web sites to the best sites.

  In fact, the developer has a new version which is awaiting review. If you want to install now until the Add-ons site admins finish to check it out, you can find it on the page of 'Versions' here:

  https://addons.Mozilla.org/firefox/addon/FoxTab/versions/

• I get the message "firefox has stopped working" after closing browser

  Hello.

  My problem is that when I close the FireFox browser, I get the message "FireFox has stopped working". It's pretty boring. I have read some other posts here that describes a similar problem and we tried some of the suggestions in them including:

  A clean install, a reset of the browser, running in safe mode, uncheck hardware acceleration, disabling Extensions and plugins one at a time, uninstall my antivirus (avast), backward to 23.01 and audit version run in compatibility mode that someone claims to be helped. None of this has been effective.

  It seems that after a reboot of the computer, the browser will be ok for 2-4 closures and then it will start by the message at each end. In addition, after uninstalling avast was good for 6 closures. Roll back also gave me approximately 6 free message closures. But then, the messages and does not stop.

  Is there anything else I can try? Thanks in advance for your suggestions.

  
  

• After the update to the latest version of iTunes, it includes the error message 'Push Apple has stopped working' and ITune could not be started

  iTune cannot be started on Win 7 after recent update with error message "Push Apple has stopped working"

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• "Show my windows and tabs from last time ' has stopped working after software updated to the end of January or early February. Now on 12.0a2. Change options "Auora to start: ' no longer works.

  I use this feature for years and update Firefox/Aurora in the next few days, maybe a week, an update becomes available and everything suddenly ' show my windows and tabs from last time ' has stopped working. I can go to the Tools-Option-general tab and change "at Aurora startup:" to this option, or 'Show my home page (s)' and now the opening in a new tab single even though I have URLs there. This may mean that this bit is not read correctly. I'm not playing: config, but I watch a few spoken options in the Web and everything looked OK.

  I would uninstall and reinstall it if you think it will solve the problem. I updated Aurora again because this problem started and it remains broken. It is a system of XP with SP3

  PS: I have two other windows with a XP and the other Windows 7. When I had the problem on my primary XP System I stopped to make updates to other systems. Today I updated the two other systems with the latest Auora (skip one or two updates) and both work very well.

  The best way for me to trouble?

  Hey punchcard4rjw,

  Have you tried to start Firefox in Mode safe? Key 'shift' startup of Firefox. If it doesn't happen in Mode without failure, you should read the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems.

  If this does not work, you should look the article How to fix preferences that will not save.

  Hope this helps!

• Equium A210 - after that set BIOS to update the DVD player has stopped working

  Hi, since I have recently updated my BIOS, my DVD drive has stopped working on my Equium A210-1AS with Vista 32 bit.

  I tried the program fixme Microsoft who does not work, upper and lower register isn't here ether in regedit.
  Someone at - it solutions for getting the DVD drive working again?

  Thank you

  Hello!

  The CD/DVD drive is listed in Device Manager? You see an error code?
  If the drive is listed in Device Manager, you should try to remove it, and then restart the laptop.

  Try to load the default settings in the BIOS.

  Have you tried to remove the upper and lower filters by yourself? Here is the solution from Microsoft:
  http://support.Microsoft.com/kb/314060

  Good bye

• Pro L10: After using a wireless mouse, the touch pad has stopped working

  Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

  I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

  Can you help me?

  Hello

  It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
  I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
  I guess that you are having regular problems with a USB mouse.

• HP CSI Shell has stopped working - cannot install the printer driver

  I just bought a printer LaserJet MFP M127fw Pro, but the installation of the pilot program still crashes. I tried 3 different modes of driver installation: the installation CD install HP Smart (USB) and download online, but I keep getting the same error.
  
  10-15 seconds after I start the driver installation, a pop-up Windows appears, advising me that:
  "HP CSI Shell has stopped working".
  
  I called HP customer care and they post in the computer section of the Support Forums.
  
  Does anyone have a solution to this problem?
  
  I have a HP Media Center PC with Windows 7 64 bit.
  
  

  Update:
  
  I tried the feature "Add a printer" windows default in Control Panel, and my printer is finally functional - only when used wireless. However, if I connect the USB cable from my printer, it will be recognized as a different printer and always unsuccessfully installed the drivers for it.
  
  If it works wirelessly, it is good enough for me.

• I get the following message and the crash - "container plugin for firefox has stopped working". How can I fix?

  On the last day of little the interent has been crashing with the following response - "container plugin for firefox has stopped working." Why and how can I solve this problem?