Speakers crackle after upgrade to win10

Similar Questions

• Microsoft Windows Nokia Lumia640 LTE Denim loses FlashPlayer & IE11 after upgrade to Win10 Mobile overview

  To the right; After upgrading my Microsoft Windows Nokia Lumia 640LTE Denim phone Win10 mobile preview, I have function no. FlashPlayer available onboard, that shows any ad or the option to turn on or off in the settings of parameters / advanced as it should. It also, since the upgrade, omitted the option to block pop ups as well. The Explorer11 of the Internet also failed to appear after upgrading to Win10 Mobile preview, which, like Flash Player, is supposed to be incorporated. I did a hard reset without success, as again after the first upgrade to Win10 Mobile Preview, the second re-installation gave the same results.  Help, please! Thank you!

  Hello

  I have answered your original question: Flash Player only is not supported on mobile devices, including Win10 Mobile, only devices dekstop.  See Adobe Flash Player | Technical for the supported platforms.

  I don't know how and why it may have worked before the upgrade to Win10 Mobile Preview, but Flash Player has never been supported on Windows Phone.  Maybe it was something that Microsoft does. I recommend you contact Microsoft support for assistance.

  --

  Maria

• Bootcamp after upgrade went Win10

  Running Win 7 on El Capitan on my MBP 2011 end 17 "for months, then awoke to find that Windows has automatically upgraded to Win10. Everything was very good, but had lost the Bluetooth device. I rebooted to Mac to try sorting this side here and then BCA did not show any current partition of BC.

  Following are the results of TestDisk and gpt

  **************

  Last login: Friday, June 24 at 15:29:19 on ttys000

  John-MacBook-Pro: ~ list of john$ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 750,2 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 374.5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 374,8 GB disk0s4

  / dev/disk1 (disk image):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme MB + 48.2 disk1

  1: Apple_HFS Adobe Flash Player I... Disk1s1 of 48.2 MB

  John-MacBook-Pro: ~ list of cs john$ diskutil

  No logical volume group CoreStorage found

  John-MacBook-Pro: ~ Jean$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 750156374016; SectorSize = 512; blocks = 1465149168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: error: wrong card

  See the TPG: could not open device ' / dev/disk0 ': Undefined error: 0

  John-MacBook-Pro: ~ Jean$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 91201/255/63 [1465149168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-731414704] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [731824344-1269544]

  * 04:07 1023 254 63-1023 254 63 [733093888-731131904] HPFS/QNX / TO THE

  John-MacBook-Pro: ~ Jean$

  *******************

  Any help would be greatly appreciated.

  JohnS

  You have a GPT corrupted that the release of the command of TPG watch. Please download Fdisk TPG - https://sourceforge.net/projects/gptfdisk/ - and after the release of

  sudo-l/dev/disk0 Gdisk

• Want to 700-021eo. : 15-one smart card reader will not work or show after upgrade to Win10

  15-one smart card reader worked fine under WIN 8.1 but after that upgrade to Win10 it does not appear in the list of devices. I have tried to find drivers but don't know if it's a unit of HP or Realtek or whatever. Any suggestions?

  Kind regards

  Eyvind

  Hello @Eyka,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you have a problem with the smart card reader and wanted to help you!  I see that this problem started after the upgrade of OS Windows 10.

  It seems that there are no Windows 10 drivers available for your product on the HP site.  It seems that Windows 10 drivers can be pushed through Windows Update.  Alternatively, you can try to check this site as well:

  HP products - where to find Windows 10 drivers and software for my model?

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• Stream7 create a recovery media after upgrade to win10

  unboxed my stream7 a few days earlier and let it update and got the 'time to get win10' icon in the systray.  I created win8.1 media restoration until I take the not... so I can go back to a clean win8... because I have now about free 3.5gig after the upgrade on mem drive.  (it's why I want create recovery win10 media... I have none left of disk space!)

  In any case, when I try to create a restoration of win10 disc... I select the check box for the system files and it works a little butthen I get this cryptic message on the screen and a button 'Finish'... but no recovery drive.  If I do not select the system files, it will erase the disk and copy data to it, but this isn't a recovery disk... There is no need to re install win10.  This is win8.1bing, so I can't use the creator of media 10 victory as I have no key... I have to use the recovery media.

  any ideas?  I really like win10, but I need my space rear disc and I want to get rid of all the win8.1 on the driv cruft.

  Thank you.

  To answer my own post... Apparently, simply wait 12 hours. (He was not an update, at least I think... I got the auto update service stopped and the Tablet off all night)
  
  When I tried again this morning... It took about 2 hours, but he had completed the restoration of the road. Another 2 hours and it increased by win10 running, but the screen would not rotate automatically. The fix for that float around these forums. Basically you reinstall the driver win8.1 for HP accelerometer. And boom, in fact.

• ProBook 6570b: cannot close down, it only restarts after upgrade to Win10

  Hello

  After the upgrade to Windows 10 I can't stop the computer it restarts alone. Someone at - he seen this before and know what happends? "Regardless if I click on restart or shut down" on the start menu, it only restarts.

  Robert

  Hi Robert,.

  What you describe can be caused by a driver not play not with hybrid Windows 10 starts, then you can try the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close all open windows and check if the laptop will now be shut down properly.

  Kind regards

  DP - K

• HTTPS problem after upgrade to Win10

  I just installed upgrading Windows 10. Firefox works well, but some sites don't work, for example facebook.com. When I simply type in "facebook.com" I get the message sent in the pictures. The message is in Dutch, but it should be something with the https connection. The only option is to click on the button, I can not go on the site, I asked.

  I have a version of Firefox installed 39.0. All updates must be installed.

  Anyone know a solution? Or it is already known and wil he soon a fix?

  Hi, cela may be in limited accounts by family parental control of microsoft. you could turn it off for your account as described in the: http://windows.microsoft.com/en-us/windows-10/turn-off-microsoft-family-settings

  in case you want to have it by intention, you would be required for some configurations in firefox and install the security certificate for the ms family that is getting used to intercept connections secured in the browser trust store.
  Click on this link - then must display a dialog on the addition of a cert. Please check the trust this CA to identify web sites & confirm the change.

  Alternatively, you can also try the manual procedure described in https://support.microsoft.com/en-us/kb/2965142 in the section about firefox.

• Several problems with photoshop after upgrading to win10

  I've updated to win 10 a week ago and today I experienced several problems with photoshop. The first question is about the quick selection tool. I select and try to choose an area on the picture I want to work on. It performs either one of two things. F1. It won't select anything finally photoshop will crash. 2 when he decided to select something it goes super slow and will switch to the symbol of thought every few seconds.

  second question...

  Because I can't get select quick took the job I'll move the pen tool. I started to select anchor points and ill get maybe 20 points the image then becomes completely black. If I scroll top down I can clearly see the parts of the image, but when I stop scrolling returned to a black square. Later photoshop then crash.  TSF is to face all of a sudden?

  Make sure that your GPU drivers are perfectly up-to-date (directly from the manufacturer) and they are 10 Windows compatible. You can also try a reset preference:

  Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.

  Benjamin

• Edge 15 does not start in Win10 after upgrade

  Updated 15 edge of Win8.1 to Win10 today. Everything was fine, then an installation file is stuck so I held the power button for a forced stop. When I turn on again, I get nothing, just a blank screen. (I couldn't even Lenovo logo) After an another power cycles, I saw a screen for "automatic repair", then he went and I'm still stuck on a white screen, noise from the hard drive, it is not read.

  I also tried to boot "Windows boot manager" and hard drive, both got white screen.

  Any help?

  P.s. I upgraded to Win10 once a factory reset to Win8.1, so I do a factory reset, but it seems impossible to get to the option more.

  Thanks for your help, I've actually made a diagnosis of HD and found too many errors, I'll replace the HD.

• Cannot get any sound on my speakers after upgrading memory

  just updated my computer by adding more memory but I can't get any sound on my speakers

  Hi RawleHouston,

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not get any sound of your speaker after upgrading your memory. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. you receive an error code or message?

  Please follow the methods and mark the question below:

  Method 1:

  Step 1:

  Run the Microsoft Fix It from the link below.

  Diagnose and automatically fix the audio problems and audio playback:

  http://support.Microsoft.com/mats/AudioPlayback/

  Step 2:

  Follow the steps in the link below.

  No sound in Windows:

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

  Follow the steps in the link below.

  Tips for solving common audio problems:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  I hope that the information above helps you, and if you encounter any problems on Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• Sattelite L50 - B - 1 P 1 after upgrade win10

  Hello I have a P L50-B-1 1 computer laptop and I have a few problems after upgrading windows 10
  1 video R7 driver missing so no present catalyst so I weak and box spring and frezess in games
  2 voice garbeld microphone when recording

  I know that the series is interrupted, but there should be some sort of fix for the problems I have atm experience.

  I don't want to go down to wind 8.1/7

  What are your exact specifications, processor, RAM and OS type 32-bit/64-bit

  According to what it is, you may be able to use the new Crimson AMD drivers instead. I have a L50D-C - 13 G and I abandoned the catalyst for Crimson drivers drivers and my machine is running great. I have a R6 of Carrizo A10 - 8700P with windows 8.1 and it works very well for me. The driver lists the compatible hardware, read it and see if your machine is supported.

  http://support.AMD.com/en-us/KB-Arti...tion_16.2.aspx

• wrong key after re-installing Win7 after upgrade win10

  I chatted with Microsoft twice on this subject, but it seems that they are all delayed because Rhea or Nino could answer my questions.  The two gave conflicting responses and referred me to another organization of Microsoft dealing with Volume licenses!   I have only two computers, why I should go.

  I had good faith Win 7 on my computer, then a free upgrade to Win10.  Everything worked except my ENTRY video card and it wasn't a problem of provider, either a driver problem with desktop video card.  (I worked with the seller of the input card).  In a Win 7 machine, the card worked fine.   Stupid me, I had updated Win 10 to see if it would solve my problem, what keeps me coming back to Win7 with an easy click on (Win10 upgrade records the Win7 files until you update.)

  No problem, I had my software Win7 disk so I re-installed, using the product key, I had listed with my Bill for the software I bought it online.   Didn't work, so I used another button, for my current computer Win10.  It worked, and I installed Win7 on server.

  Good news: my entry video card works.  Bad news: I can't activate Windows 7.  The key that I use, the key to this computer failed during installation reports that she wants a "Home Premium Key" while I had upgraded to Win7 Pro for free.  The key that let me install (for my OTHER computer) is blocked by Microsoft, as it should.  No trouble there.

  How can I get from Microsoft to resolve this issue.  I have the invoice and key for the software on my desk ready to prove my case.   Microsoft let me update this machine with THIS key to 10 Windows but it won't let me DOWNGRADE using the SAME key for Windows 7.

  I suggest that you run the diagnostic tool Microsoft Genuine Advantage in normal mode and copy and paste the results into a response for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

  Run the tool and when it ends, click the copy button, open a text such as Word or Notepad file and select Edit, paste. You can paste directly into an answer here. Open a response, right click and select Paste.

• Latitude E5520 Audio problems after upgrade to win 10

  I have audio problems after upgrade to win 10 64-bit.

  Dell Latitude E5520 IDT 92HDxxx HD Audio
  Hardware ID:
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A & REV_1001
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A

  (1) if I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

  (2) if I use the latest Dell driver (IDT 92HDxxx HD Audio Driver) I hear initially via speakers, but as soon as I plug in headphones I can't switch back to the speakers (i.e. switching between the speakers and the headphones does not work) and my laptop computer microphone works.

  I would be happy to provide more information and help to debug.

  To a Microsoft Community Forum, I received the following reply from Rob Brown - Microsoft MVP:

  *************************************************************************
  Hello
  AS OEM Dell is responsible for the good operation of the equipment both
  and Windows. Check their documentation online with Dell Support, and
  drivers and ask questions in the forums about known problems. Make sure that you are
  Run the latest version of the BIOS, chipset and drivers.
  I hope this helps.
  *************************************************************************

  I understand that the Latitude E5520 does not appear on the Dell "Computers tested for upgrade to Windows 10" list... However I was hoping maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

  Thank you
  John D.

  johnsdagg

  AS OEM Dell is responsible for the good operation of the equipment both
  and Windows.

  Hi, John. It's quite nervous of a member of the MS forum say that Dell is responsible to operate Windows. It wasn't Dell but MS who claims that Win10 has most of the necessary drivers and if not then the drivers Win7 and Win8.1 would work.

  johnsdagg

  I was hoping that maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

  I doubt that it is possible for two reasons. Dell went from IDT Realtek as the audio seller so probably not more a a contract with IDT, if IDT even exist anymore. A year ago IDT was acquired by another company. I do not know its current status, but it is sure that the acquiring company will not be upgrading old software IDT. Reference Dell itself does not write the audio drivers. Even when IDT was the seller I believe that Win7 drivers are the final versions - no version 8 or 8.1 I think.

  johnsdagg

  If I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

  The native Windows audio driver can't stand struggling external mic. It is a MS 'known problem '. MS must implement a decision-making support, but there is no indication that it will be. Meanwhile, you have two workaround solutions. You can switch backwards between the natives and the IDT drivers. At some point Win10 could leave the IDT driver works correctly. Or get an outlet cheap usb audio to the microphone. Struggling running out-audio driver usb Windows native usb and so dependent no driver IDT.

• HP Pavilion notebook pc p001tx: unable to find audio beats after upgradation from windows 10

  I have updated my windows OS 8.1 for windows 10 previously audio beats laptop after upgrading pc speakers it's been showing realtek high definition audio. I completely lost my beats audio experience. Please guide me how to fix this problem

  Have you looked in the control panel?

  With my current HP Omen 15 loan product specifications, this is where he now resides after the upgrade to Windows 10.

  Help us help you by displaying the following information.

  1. the full name of the model. or product number. the laptop - see web document this HP if you do not know how to locate the product number or model number.

  Try the following audio driver Realtek 10 Windows. It can return the function Beats to your laptop.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72139.exe

• HP All In One: Lost power option after upgrading windows 10

  Before upgrading Windows 10, I could hold my cursor to the right of my screen and I'd be shown options to turn off or put my computer to sleep. After upgrade, I am unable to get this to fall down. How to turn off my computer or set mode 'sleep'?

  muskratt

  This ability was known as bar charms - and deleted for Win10 MS.

  To turn off your PC now, you go to the Start Menu and options options power, you will see here - select one of these.

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================