Speakers playing while headphones are connected.

Similar Questions

• Reading through computer speakers, even when headphones are connected to the sound

  Hello
  When I connect my headset to my dell ispiron 1545, the sound is played through the speakers of the laptop,
  nothing will stop it doing this
  In my playback devices I have

  Speakers/headphones
  IDT high definition audio CODEC

  Independent (RTC) headset
  IDT high definition audio CODEC

  -------------------------------------------------------------
  When I turn off the speakers/headphones, I have NO SOUND at all and I have a small speaker with an x in the corner
  nothing allows me to set the helmet as a defauld, when he says to set as default, nothing happens, as it won't let me change anything in the
  IDT Audio Control Panel
  Also, I am an administrator
  PLEASE HELP AS MY LAPTOP SPEAKERS ARE RUBBISH

  Hello

  Follow the steps in this article and see if the problem still occurs.

  http://support.Microsoft.com/mats/NO_SOUND
  See also: http://windows.microsoft.com/en-US/windows7/Tips-for-fixing-common-sound-problems

• Satellite A660: the sound is still coming from the speakers even if headphones are connected

  Hello

  whenever I have connect headset I still sound emitting from Laptop speakers.

  I have looked in the sound options and realtek but can't see a way to fix this.

  It is forward in my old laptop.
  Michael

  Go to: "Control Panel."
  Click on: "Realtek HD Audio Manager".
  With the "stakeholders" tab highlighted
  Click on: "connector settings" (it's the icon of a yellow folder, in the shaded blue, on the upper side right of the screen)
  «Click here: "contextual dialog box enable auto «»
  Click: 'OK '.
  Connect headset
  What pop-up appears, select "headset" as connected component (NOT out line)
  Fact

• Speakers get muted when headphones are connected

  HP TouchSmart 520

  Windows 7

  The built-in speakers put muted when headphones are connected.

  Hello

  I had the same problem recently with the urge of 23 I use at work, so I plugged the headphones in the speaker to the back of the computer. The music now plays only through the headphones.

  When the computer is seen from behind, the speaker on your desire output jack is probably close to the lower right. It looks like your headphone output, but it has a small icon that looks a bit like this:
  (((.)))

  In addition, a member of the forum named emmarose has had the same problem; That's how she solved: "the problem was solved when I deleted and reloaded the sound driver," she wrote.

• Qosmio F50-108: speakers still work same headphones are connected

  I have this laptop and when I insert the headphone output line, my speakers doesn't always work and I heard sound, speakers and headphones.
  What should I do to correct this?

  When I insert the headphones, I want to hear sound only on sound, no speakers on this time, and when I unplug the headphones, the sound should be back on the speakers?

  Help, please...

  Thank you

  Hello

  You should check the settings in the control panel-> Realtek audio Manager
  Pregnant tab contains some options on the right.
  There should be a path analog and Digital port.

  Turn right or left click on the headphone and check if the option has been disabled which allows the sound from the speaker, while the headphones are connected.

  Welcome them

• No sound - "no speakers or headphones are connected.

  original title: Sound

  Hi I have a problem with the sound on my Sony Vaio.

  The audio icon displays a red x and when I move my cursor it happens with the text next message "no speakers or headphones are connected" could please help me.

  ~ Denise ~

  Hello

  1. are you you can hear sounds in Windows even if there is a red X mark?
  2 have you made any changes to the computer before the show?

  3. you are trying to play sounds through internal speakers?

  You can perform the following methods and check if it helps to solve the problem.

  Method 1: Run the audio troubleshooter.
  Open the Audio playback troubleshooting utility:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2:
  If the audio functions work correctly, I suggest you return the item.
  In Windows 7 a red "X" may appear on the speaker in the notification area icon, even if the audio output correctly functions: http:/support.microsoft.com/kb/2011656

  Method 3:
  If the problem persists, perform the steps described in the article.

  No sound in Windows: http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  See also:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  I hope this helps.

• no speakers or headphones are connected

  Hello! I have HP pavilion dv5 un2420, im suffering from a problem of noise... .the icon in the system tray program (x) volume on, and giving the indication to this statement that no audio device is turned on, I uninstalled the driver from Device Manager and after hibernation the volume icon indicates no speakers or headphones are connected now tell me it is a software problem or hardware, im so exhausted! Please help me out of this *.

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Satellite Pro 4600: beep when the headphones are connected

  Greetings to everyone.

  I feel a strange audio problem with my Toshiba Satellite Pro 4600 headphone output port. Whenever headphones are used, bursts of low beep occur regularly every 3 seconds or so superimposed on what playing right now. Each burst lasts about one second and consists of about 8 fast beeps. The beeps occur after Windows starts and end once the system off. I thought that it was a driver issue, but I use the latest driver for my card, downloaded from the site Web of Toshiba (package name: s5105sndx.exe).

  Can anyone help?

  Thank you for your attention.

  This problem doesn't appear if the headphone is plugged or also with the speakers if the headphones are disconnected?

  If this happens only if the headphone is connected if there is something wrong with the headphone jack.

• audio in my sony vaio laptop off – "no speakers or head phones are connected.

  the sound icon shows a cross-reading. When I keep the cursor on the audio icon, a message appears saying: "no speakers or head phones are connected.

  Please help me to fix this.

  Response to the merger: http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/audio-device-disabled-no-speaker-or-headphones-are/93336e0f-d233-40f8-9316-2c3c1a11573e

  Audio device disabled - "no speakers or headphones are connected.

  I followed the steps recommended by you, but the problem of noise continues. Please note my findings below and help me go further: -.

  'Sound, video controller & games' shows two devices: Conexant HD smart audio and NVlDIA high definition. There is no mark exclamation red cross mark or yellow on both of them. When you click on, the two machines carry a message - "the device is functioning properly. If I right click on them, the options are - 'update or disable or uninstall.

  However, the ((deuxieme audio Conexant HD smart icon right IE thelast except one) at the top of the Device Manager screen bears a mark of Red Cross. If I click on that red mark, the only option available is "Uninstall".

  Please excuse the delay in the response. After checking your computer manufacturer site, I found that the drivers are not available for Windows 8 OS. This problem can be caused due to problem of compatibility between the audio drivers and Windows 8. To resolve this problem, I suggest you to download Audio driver from this link: http://www.sony.co.in/support/product/vpceh3aen and save it to the desktop.

  Installing the driver in compatibility mode Windows 7, see: http://windows.microsoft.com/en-US/windows-8/older-programs-compatible-version-windows

  Keep us informed.

• MacBook randomly landed volume when the headphones are connected.

  Hey,.

  There is something wrong with my MacBook. When I plug my headphones, the Mac randomly landed the volume at any time. I thought the keyboard can be broken, but it doesn't happen when the headphones are connected so it may be a problem with the software (I think?). Has anyone experienced the same problem? Do you know how to fix this?

  My Mac is the MacBook Pro 15 "retina (mid-2014) running the El Capitan 10.11.6

  Please try resetting the memory NVRAM and SMC.

  Reset the NVRAM/PRAM memory.  http://support.Apple.com/kb/PH18761

  Reset the SMC. Choose the method for "If the battery is good behaviour."

  https://support.Apple.com/en-us/HT201295

• Equium A200 PSAF5E - internal speakers working but headphones are not

  Hey guys,.

  I have a problem with my Equium A200PSAF5E,

  My sound is perfect, however when I plug in my headset, nothing.

  My headphones are 'connected' and when I do the 'test' headphones I hear the sound through the headset.

  This is driving me crazy because I can hear the TV hidious

  Help

  Michael

  It's very strange. So you're sure that your headphones are 100% ok?
  Have you tested your helmet with other devices?

  Have you tried to update the audio driver? If this is not the case, the update.

  But not to be honest, it looks more like a fault of headphone jack to listen like a software problem.

  In any case, it should be to update the audio driver

• Always sound coming from the speakers when headphones are connected

  When I plug my headphones, the continuous sound coming out the speakers with no sound at all through the headset. When I go on manage audio devices, the helmet will appear, but it says that they're disconnected even if they are connected. I know the headset works very well because they work with my phone. I have Windows 8. What can I do?

  Hello. This is usually a driver problem, especially on models having Realtek audio.

  If you need more help please give the complete model name of the laptop.

• Since iOS 9.3.1 my phone plays music on its own when the headphones are connected

  Since the last update, my battery does not last a whole day more and for some strange reason when my headphones are plugged into the music start playing without me from music. Music plays on its own at random times. Several times when I have my phone on the desk, I heard the beginning of music playing also on its own that helps the battery drain but other that the battery for some reason life any has been terrible. I hope Apple fixes this soon and also the restoration of the ability to use 3G to help save battery life. I have actually charged my battery to 100% and without touching all day insured no apps running in the background and I noticed my battery was 70% when ended the half-day.

  Try settings-> general-> transfer & Apps suggested and disable "Apps install".

• Pregnant active satellite L855 - 10 p: even if the headphones are connected

  Hello

  I have an interesting, a very minor, but quite annoying problem.
  Basically, every time I start playing some audio on my laptop, and I plugged headphones, it will play through the speakers during the first few seconds and then switch on the headphones.

  It doesn't matter how long the headphones were in.
  If nothing has played, and I then click to play a song or video or something, it will do.

  Its quite annoying as obviously I use headphones when you try do not disturb others with my noise, this kind of ruins it.

  I can not turn off the speakers, as it seems to disable the port audio jack as well.
  Everyone has ever known, or have an idea how fix?

  Thank you

  Charlie.

  Hi guys

  The question is not related to a faulty headphone jack port, but the settings that you can find in the Realtek HD audio Manager (models L855 supports the Realtek sound card)

  In Control Panel-> Realtek HD audio manager, you can find symbol small file placed on the upper side right.
  I m not fine the name of these options, but when you click it the connector settings window will open.
  Enable auto popup dialogue.
  Now, every time when headphone is connected, you can choose helmet as one device that you want to use.

• How to display the lsit of play while visualizations are playing

  How to display the playlist while visualizations are playing

  What version of WMP are you using?

  You can usually right click the button reading at the top and select view the list pane.