spooler not runnig

Similar Questions

• spool of printer, where and what - what mine says is not runnig

  When I try to print it says printer spool does not

  You can try to disable your print spooling.  This means that when you print, you must wait for printing to stop before proceeding, but it could be a solution.  To do this, follow the instructions in this article:

  "How to troubleshoot issues that you may experience when you try to print to a local printer by using Office programs in Windows XP"
    <>http://support.Microsoft.com/kb/870622 >

  About 3/4 down there is one subsection titled "change the spooler settings."
  This does not solve the problem, but it might get you going again.

  HTH,
  JW

• Printer Spooler not working not

  I can't print the printer spooler is not running. I can't add the new printer. LexBce file does not run. How can I fix it?

  I can't print the printer spooler is not running. I can't add the new printer. LexBce file does not run. How can I fix it?

  Click Start, all programs, accessories, command prompt. type the command ff:

  dependent on the spooler of sc config = RPCSS

  related topic:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/print-spooler-error-1068-the-dependency-service-or/399f0ba6-EE10-43B7-A51B-b30bebb56cd9

  Hope this helps,

  Thank you

  Makoi

• Print spooler not working error 1068?

  After Service Pack 3

  Hello

  · What is the number and model of the printer?

  Try the steps listed in the link below and check if it will help: printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  You can also try the steps listed in the link below: you can not print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close": http://support.microsoft.com/kb/810894

• Printer Spooler not started or has the error?

  When you run in the installation or printing issues, and it gives you a message on your "Printer Spooler", it is usually in the service of your window.

  Here are some measures that you can get (again).

  1. click on Start Menu
  2 right click computer
  3. choose MANAGE
  4. click on Services and Applications
  5. choose the Services
  6 scroll down until you see PRINT SPOOLER, if it is there, click on it and run it. (In addition, it should be NOT automatic manual)

  If the "Printer Spooler" isn't on the list, you will need to contact your WINDOWS because this should be already on your computer and START.

  Thanks for reading, hope this helps.

• Printer Spooler not enabled: my printer does not print and my computer does not load the disc from the printer

  When I try to print a document, I get an error message saying my printer spooler is not active or currently running.  When I search my printer on the computer, it went, so I tried to charge it and it wouldn't let me install the printer.  Can you help me please?  Thank you.

  Hello

  1. what happens when you try to reinstall the printer?
  2. do you receive any error messages?
  3. What is the brand and model of your printer?

  Please provide us with some information so that we can help you solve the problem.

  You can consult these articles for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• print spooler not working-dependencies

  my printer does not work. Inop print spooler service. There were traced back to a dependent service

  Hello

  ·        What is the exact error message?

  ·        You are not able to print using the printer?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Follow step 1 below to start the spooler service in Windows 7.

  Step 1:

  a. click the Start button and type Services.msc in the start search box and press ENTER.

  b. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. find the print spooler service and right-click on it, and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Step 2:

  a. go to programs and features in Control Panel, and then click turn on turn Windows features on or off

  b. click + sign printing services

  c. Select LPD and LPR. You must remove the Internet printing Client and restart your system to ensure that there is no error in the spooler service.

  d. to re-add your printer driver.

  For more information, see the article mentioned below.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Printer Spooler not working!

  Does anyone know why the print spooler does not work, what are the causes and how it can be fixed? Because of this problem, I am unable to install a printer on my computer. I spent endless hours on the phone with tech support trying to install a printer, but without success... Then we had the errorr message saying that the printer spooler does not work.

  Thank you!

  http://support.Microsoft.com/kb/2000007/en-us

  Solve printing problems by resetting the print spooler

  I hope that the information above solves printing problems you encounter.

  See you soon.

  Mick Murphy - Microsoft partner

• Print spooler not turned on do not, how do I turn it on?

  I did a search print spooler, but when I try to open it with windows search, nothing happens.  Troubleshooting repeatedly tells me that my printer does not work because it is turned off.  I tried to uninstall, but impossible to reinstall without the print spooler on.

  Type services in the start search box, press on enter.

  Go to the bottom of the list of print spooler and click on start.

• Print spooler not accounting... I used the "Microsoft Fix It", but did not work... help me please.

  Service print spooler finished unexpectedly. This has happened to 8 hour (s).

  Try the hotfix in the following article to see if it helps to solve the problem: http://support.microsoft.com/gp/printing_problems.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• SCRIPT NOT RUNNIG

  Hi experts.

  I have the script that is not running. Please help me

  RUN ' BEGIN DBMS_STATS. () GATHER_TABLE_STATS

  ownname = > 'XXXX '.

  , tabname = > 'table_loG.

  , estimate_percent = > NULL

  , block_sample = > FALSE

  , method_opt = > 'RUSSIAN COLUMNS.

  , degree = > DBMS_STATS. AUTO_DEGREE

  , cascade = > FALSE

  ); END; »

  RUN ' BEGIN DBMS_STATS. () GATHER_TABLE_STATS

  ownname = > 'XXXX '.

  , tabname = > 'table_loG.

  , estimate_percent = > NULL

  , block_sample = > FALSE

  , method_opt = > 'RUSSIAN COLUMNS.

  , degree = > DBMS_STATS. AUTO_DEGREE

  , cascade = > FALSE

  ); END; »

  RUN ' BEGIN DBMS_STATS. () GATHER_TABLE_STATS

  ownname = > 'XXXX '.

  , tabname = > 'table_loG.

  , estimate_percent = > NULL

  , block_sample = > FALSE

  , method_opt = > 'RUSSIAN COLUMNS.

  , degree = > DBMS_STATS. AUTO_DEGREE

  , cascade = > FALSE

  ); END; »

  Hello

  The slash must be a a new line:

  RUN ' BEGIN DBMS_STATS. () GATHER_TABLE_STATS

  ownname-online 'XXXX '.

  , tabname-online "table_loG.

  estimate_percent-online NULL

  block_sample-online FALSE

  method_opt-online "RUSSIAN COLUMNS"

  degree-online DBMS_STATS. AUTO_DEGREE

  the cascade-online FALSE

  ); END; »

  /

  RUN ' BEGIN DBMS_STATS. () GATHER_TABLE_STATS

  ownname-online 'XXXX '.

  , tabname-online "table_loG.

  estimate_percent-online NULL

  block_sample-online FALSE

  method_opt-online "RUSSIAN COLUMNS"

  degree-online DBMS_STATS. AUTO_DEGREE

  the cascade-online FALSE

  ); END; »

  /

  RUN ' BEGIN DBMS_STATS. () GATHER_TABLE_STATS

  ownname-online 'XXXX '.

  , tabname-online "table_loG.

  estimate_percent-online NULL

  block_sample-online FALSE

  method_opt-online "RUSSIAN COLUMNS"

  degree-online DBMS_STATS. AUTO_DEGREE

  the cascade-online FALSE

  ); END; »

  /

• The work is not Runnig

  Hi Experts
  
  We are using Oracle 10 g Release 2 database on Server 2000,
  A month of jobs are not running,
  I've created the jobs of Toad,
  for one and a half years jobs were running Fine
  What could be the Cause of this behavior
  
  my employment status is with the status to online only, but not running
  There is no mistake, I think,
  I need to manually run the job execution every time
  
  Please suggest
  Thank you very much

  Hello

  I'm assuming your sysdate (date system is for the month of July), you can check if below init settings are correct and that it is set to job_queue_processess must be greater than 0. And were there any change this setting from the time wherever you see this problem.

  JOB_QUEUE_PROCESSES
  job_queue_intervall

  See you soon
  Anurag

• report with the parameter user is not runnig

  Hello
  I created the user parameter p_deptno and qyery related "" select * from emp where depno =: p_deptno ";"
  When I run the upgrade report page paper a popup page will open and ask us to enter the deptno and the input on the basis parameter, it retrieves the report folder.
  If I tried the same thing with the url: http://localhost:portno/reports/rwservlet? destype = hide & desformat = pdf & report = emp.jsp & userid=scott/tiger@orcl
  the parameter window is not opening and and blank report opens with the coloumn headers.
  help me solve the problem.
  
  I use devsuite oracle10g release 2 on linux (OEL4).

  Hello

  Use paramform = Yes instead of paramform = true:

  http://localhost:8890/reports/rwservlet?destype=cache&desformat=htmlcss&report=EMP.jsp&userid=Scott/Tiger@ORCL¶mform=Yes

  Concerning

• Problem with my printer - printer spooler does not

  Printer Spooler not working do not, said no installed printer, doesn't let me install again running with windows Xp.  I can do no problem before working with this printer for 10 months with no problems, is there a solution.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Use of the special procedure for printers Lexmark described below and follow in its first Article.  If still no joy, use the alternative method that is linked below.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

  A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.

  Open a command prompt window (start > run > cmd > OK)

  Type the following in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS
  output

  Note that there is no space before the =

  If you want to use a Lexmark or Dell-badged Lexmark printer after having done the above, you will need to reinstall it.

  Alternative to the method of his Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• My spooler system starts and then stops, it is set to auto. Sys spooler keeps coming back. does not

  I started the sys 6 times he said start ed and when I go to install my lexmark p6350 said spooler not working not

  Try to run these tools:

  http://support.Microsoft.com/mats/printing_problems/

  See if she could solve the problem, also try to update your Windows.