Sprite under problem still clickable sprite?

Similar Questions

• My touch screen has a problem after downloading the IOS 9.0.2. Already try apple advises the steps. But the problem still occur. Already done restart of strength. Factory setting Reset also possible. But still the same problem. Can only be used at one min

  Hello!!!

  IM Apple Fan.

  Purchased IM Ipad2, Ipad4, Iphone6

  Last month I already buy s Iphone6 +.

  Today I feel unhappy

  MY IPHONE 6 'history '.

  My touch screen has a problem after downloading the IOS 9.0.2.

  Already called and try apple advises the steps. But the problem still occur.

  Already done restart of strength. Factory setting Reset also possible. But still the same problem.

  Only can be used for a minute. After that... The problem comes in again & again & again...

  APPLE.COM

  Can U help me

  Only products of Apple of love before updating the version 9.0.2

  iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.

• When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  Ideas:

  • When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  I tried to download the RegCure as advised, but the problem still exists...

  Who advised you to 'download... '. RegCure? Doing so could only worse issues! If you ever think that your registry database must be cleaned, repaired, boosted or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Hi, on some sites of adobe muse, when I load, I get a mobile version of the site (on a laptop). I tried to remove the 'phone' and the words after that on the address bar and even cleaned my browser, but the problem still exists. What can be the reason? I'

  Hi, on some sites of adobe muse, when I load, I get a mobile version of the site (on a laptop). I tried to remove the 'phone' and the words after that on the address bar and even cleaned my browser, but the problem still exists. What can be the reason? I am using Lenovo y50... help me please

  The y50 Lenovo is a hybrid and that manufacturers are especially ThinkPads, I guess that Adobe sees it as such is why you get the phone display.

  However, you can delete the 5876 to get a view of the desktop and all do it muse site

  for example, the home page

  change the /phone/index.html to businesscatalyst.com/index.html to see the office... I suppect you forgot the slash so delete/phone phone not only

  Office ex = yourweb page | Home

• I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still re

  I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can we do?

  Moved to this discussion in the creative forum cloud download & install.

  R.O.B. Please see Sign in, activation or connection errors. CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for more information on how to resolve the error of connection between the computer and our activation server.

• Button.Enabled = false (but still clickable?)

  Hello dear Forum,

  Got a button (any png defined as a button in the library).

  You drag the button on the stage, given an instance name "btn".

  By clicking the button triggers an eventListener that does all the right things, except...

  BTN. Enabled = false;

  .. .only changes the cursor to a pointing arrow. What? It is still clickable.

  My intention is to disable the button, so you can't click on it. But you can still click on it. Not good.

  QUESTION: How do I disable a button and stop him from which is clicked?

  Thanks for your support,

  Johan

  REASON: I'm temporarily disable the button so that you can not click on it several times while loading other stuff. Makes sense.

  To disable the button (a homegrown SimpleButton) use its mouseEnabled property.  I think that enabled applies only to button in AS3 components.

• I could not hear any sound from my speakers, only used the tool of the window all still no sound, so upgraded to sp2, now having display problem & still can't hear it please help?

  I have xp home edition sp1 happen something with my sound on pc tools in the window couldn't resovle the problem, so updated to sp2, now, I posted problem cannot reset resolution on screen and still no sound, anyone has a solution?

  Hi JeanBolling,

  ·         What tools did you use to solve the problem?

  ·         What happens when you try to change the resolution?

  Method 1: Check if you have followed this guide from Microsoft.

  No sound in Windows

  Method 2: Uninstall the sound card and reinstall to check the issue.

  a. click Start, click Control Paneland then double-click System.

  b. click on the hardware tab.

  c. expand sound, video and game controllers.

  d. right click on the sound card, and then click on Uninstall.

  e. restart the computer. Log on to the manufacturer's Web site and update the latest audio drivers.

  Method 3: For the display problem, you can consult this article.

  Resources for troubleshooting problems in Windows XP

• On laptop CD/DVD drive is not recognized/is missing. Having read the other topics, problem still not solved.

  I'm on a computer laptop gateway and my cd player does not work all of a sudden. I can eject and put CD in there and it will hum for awhile, but nothing will happen. I went to Device Manager and it is not yet listed. I read the other topics and the problem is still not resolved, please help. Also, my HKEY_LOCAL_MACHINE folder has not all folders in there, so I can't go to system/etc to delete anything because there is nothing to remove. Thank you for your time

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers to check with the system manufacturer to see if there is a firmware or drivers for your if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• The customer service horrible, problem still not solved!

  Have been waiting and redirected countless times with Dell, the service is absolutely HORRIBLE. My problem must be resolved so easily but all support Dell seems to be able to do is redirect me to departments who "don't deal with this issue" and continue to redirect me to the departments that are not yet open.

  Here's my question:

  I have a pro place 8 tablet and I lost the original charger. All I need is another charger since most chargers are not compatible with this tablet (which is another complaint all on its own). I found it by these forums to search and discover that it is a common problem that Dell is well aware of.

  So I call them.

  Start telling them that my tablets not charging

  The support guys trying to tell me that I need a new motherboard... $ 269

  Of course, might be possible, but I remember actually pre lose my charger that whenever I tried to use another charger, it wouldn't work. Also online in the support section for this tablet is the FIRST most popular question and the first solution, they point out, is that you need to use the original charger.

  Oh OK, well, if you think that's the problem, I can redirect you to sales...

  Uh, you're not supposed to know that... After you've tried condescendingly explain to me why the motherboard needs to be replaced after that I had asked you...

  Good redirected to sales

  We no longer sell this charger

  Okay is there any other place I could possibly get this charger

  You can try best buy or Amazon

  Thank you very much.

  After looking on their Web sites and to realize that they don't sell it, I decided to call and ask what will work the Chargers not Dell or the specifications of this special charger so that I can. just. fees. my tablet.

  It took me quite a 1 h 30 trip comprising services saying they are allowed to sell Dell products and cannot tell me even this charger specifications and that I can ask other departments about this. Then redirected to incorrect departments or those that are closed. All it seems to stop me from buying a charger for $10 anywhere else.

  Don't know what else to say. Still have no charger, still cannot order a new, still do not know what other charger would work. Call us and be redirected at least 2 hours, I have 16 total number of calls on my phone to their different support numbers. I think I know their business better than at this point. Literally the worst customer service I've ever had, wouldn't mind so much if only I actually got my problem fixed! Afraid to never buy Dell again where any little thing goes wrong and you are ADMIN NOTE: profanity removed according to the TOU >.

  Hi Dolotova,

  Thanks for posting.

  I apologize for the service you have received to date.  Unfortunately nobody has referred you to the spare parts page.  Here's the charger you are looking for.

  Kind regards
  Robert

• Audio problems still exist after July Update Organization

  Customer since Creative suite 2.0 and never had any problems making vids. Maybe can someone tell me what settings to use to create a clip vid of simple h264 with audio track? Audio is clipped, choppy and seems to be accelerated to any media use; separate .wav, mp3 in a GoPro video or a track HDV or my Canon 6 d. Result even import old clips in sequence, or from new projects.  I looked around but didn't see any responses. Yes, I can still use CC2014, but I would like to use the product for that I am paying. It would be if I had known that they are still working on this. TIA

  Yes, I see many people with the question. I had problem and solved. Everyone has different scenarios, but unwilling to provide any information, just fix it is general conscensus. I look in my preference settings Audio Hardware, my ASIO latency of the device, its control panel, sequence settings, and try to imagine what others have without providing is difficult.

  The MADAM is the passage from the first 2014 where he was and was in older versions as first WDM Sound, where the input, output, clock and latency were not options on the screen for front.

  What is your latency? mine is 200 ms.

• Problem with clickable area CP7

  Hello world

  (first of all sorry for the language, I'm French)

  I have a problem in a captivate module 7, I created several clickable areas (I take one and copy/passes along the module). Some work perfectly and some do not work. Areas are clear, nothing is set above or nearby.

  You have an idea for a solution or the same problem?

  Thanks in advance

  The point of break for your click box is near the end of the slide (depending on your screenshot).  If you want the slide to pause as a result of the click box, move the right end of the purpose of click left box a bit (for example, 1 second or more).  Click boxes can be set NOT to automatically pause the slide.

  Select the box click object, and then check in the Properties tab to see if you have deselected maybe Visible output (which would mean that the click box has been disabled).

  ALS check if perhaps you have deselected the option fo project Pause until what the user clicks. This would mean that your click box is not going to pause playback.

• AUTOMATIC logoff problem still exists in Skype v.3.6.97

  Although Skype iOS is a connection automatically and never offline, after update to Skype v.3.6.97 bug automatic logout of Skype without your knowledge after leaving it for a while. My contact told me in email that I was in the State of offline and cannot call or instant messaging for me, but I have never logout my account nor the whole of the offline state. This bug is a serious matter and hope that developer Skype can fix this in the next update as soon as possible.

  Response of Claudius: "the Skype team is aware that in certain circumstances the Skype App still disconnects. I can't comment on when this will be fixed. "Until we can do is to open Skype App intermittently to keep it on the connection state. Or ask your contacts to send e-mail to you when they want to make Skype video calls you if they see you are in offline mode.

• XP home sp3 startup problems - still starts in safe mode

  Hello

  MY OS is XP HOME SP3 on a 3200 Averatec serieis.the startup cannot be completed and moves only to security mode.all other debugging options, last good state and directory... I tried are blocked and place an order for safe mode! I have tested several Anti spyware software and antivirus, but found nothing as a threat or a spyware! on the other hands I don't have my OS systems with my recovery disks now cos they're in Toronto today and I'm in Asia.

  Is anyway for me to find a bootable disk image cd as a solution? or can I solve the problem without any boot cd.

  Thanks for any help

  Hi Tatiana,

  1. Did you the latest changes on the computer?
  2. What happens when you try to start in normal mode?

  Check if the below mentioned settings are correct on the computer in safe mode.

  (a) click on the start menu, click Run.

  (b) in the run box, type "msconfig" without the quotes and click OK.

  (c) click on the 'BOOT. INI"tab and uncheck" / SAFEBOOT ", click 'Apply', 'OK '.

• My compositions are still clickable, even if it has already been triggered.

  Hi all

  I am updating a portfolio website that someone else did. I'm more literally learn tutorials and trying to deconstruct what he did.

  I have a collage of images, each with its own composition (trigger, objective and close). When you click a picture that the composition appears, closing extends all over the page, perfect composition closes whenever the user clicks on after its outbreak. However, what is happening is that images behind the publication triggered fire when turned on in their areas instead of the composition of closing.

  The "trigger on top" is disabled in all of the compositions. I don't know how I can solve this, spent over an hour trying to understand him. Any help is appreciated.

  Thank you.

  Hello

  You can share the URL of the page in question? If the you have not published it yet so can you please share the .muse file so that I can take a look

  There might be a problem with the layers too, but I wouldn't be sure unless I see the file. I shared the my email in a private message I will send shortly.

  Concerning

  Vivek

• Batch "save under" problem

  Strange things are during the batch save as function.

  I have a set of actions I need to run on hundreds of jpegs, they simply had a lens correction, Auto color and auto contrast, then need to record in TIFF format, everything works fine when I record the action, but when I run it on a folder full of images JPEG, TIFF is huge! original JPEGs are about 5 MB and TIFF is 30 MB, if I ask to save it as a file individually think fine (about 2 MB file size)

  In the Save as item, I've specified compression jpeg at a quality of 8, but it seems miss it in the batch, am I missing something?

  Running on OSX 10.7.5 CS6

  Sorry, I meant stock,

  the output should be tiff, as requested by another Department,

  I just created a new action with the same settings and it worked perfectly,

  the two actions are identicle yet we work and the other not,

  bit of a strange problem, but it works.