Square library... not the ordinary GPU problem (overlay) Blue

Similar Questions

• Songs in the library, not the same indictment

  My laptop shows 177 songs but my new desktop computer only 60.  How can I get the rest of my songs on my desktop computer?

  Copy it to the network, or use a portable hard drive.

  TT2

• Links of search results Google does not load (not a direct new problem)

  Simple problem:
  1 enter a term for Google to search for (either using the Google toolbar installed or via his landing page).
  2. the results are returned correctly.
  3. However, the returned links open in the same tab of search result, or in a new tab or a new window.
  4. Select the link in the search results tab does nothing. Firefox seems to be a momentary load try before remaining in the same place.
  5. launch the link in a new tab/window returns a Google long-chain based on the prefix (i.e. www.google...) address in the navigation of an empty tab/window.
  6 addresses returned by the search can be copied and pasted into new tabs/windows to load without a problem. Research process of Google to normal using this query works since IE every time.

  Test: "Energizer Bunny".
  Returns the link: www.Energizer.com/Energizer-Bunny/pages/Bunny-Center.aspx
  Has address: http://www.Google.ca/URL?SA=t & rct = j & q = % 20bunny energizer & source = web & cd = 1 & ved = 0CDYQFjAA & url = http %3% 2F % www.energizer.com%2Fenergizer-bunny%2Fpages%2Fbunny-center.aspx 2F & ei = ruYyT47cIYHjiALj69XGCg & usg = AFQjCNHg-eabuCQBx6Bv36V9F4pN4tQRYA & cad = AJLN

  Note that this is not the Google redirect problem that many users have encountered, but something different.

  Suggestion of John99 above that the cause of the problem is a problem of update of Google I think is correct. The discussion link: https://support.mozilla.org/forums/contributors/708153 indicated that Mozilla is working with Google and that a cancellation would be promulgated.

  Although I can say this was done because the Google search function works again (from 4 PM MDT). I tried with some queries from first time and they worked as announced. All features have been restored.

  (For the record, cookies were already on my machine but I clear them and hide according to the first answer - that didn't work. No other solves above I only implemented. "So as far as I'm concerned, he was a"problem of Google", it was a"fix Google").

  Hope that affected everyone else now has the same experience. Thanks to those who offered their intelligence.

• Satellite L50D-B-12W does not recognize the Integrated GPU

  Hello

  I recently bought a laptop Satellite L50D-B-12W.

  The laptop comes from Italy and im from Spain, but the stock windows installed from the factory was in English.
  I change windows stocks for a Spanish 8.1 for Windows Pro 64-bit and the problem starts here.

  This medication works well, except the built-in graphics card.
  The laptop tells me what the model is AMD APU A6-6310 with graphic AMD Radeon R4 card.

  Initially I download graphics drivers web support AMD APU.
  I installed and recognizes the cpu but not the graphics card (remaining with the VGA in Windows standard) for videos HD plays with cuts and slowly.

  Then I download the autopilots downloand shape AMD and the program downloads the APU A6 drivers but the problem is the same.

  I try with Windows 7 64 bit also, but I can't seem to recognize the integrated graphics card.

  Please, can someone help me?
  What are the correct drivers I need to download?

  Hello

  The Satellite L50D-B-12W was not equipped with a dedicated (external) graphics chip
  The L50D-B-12W Satellite was equipped with rolande A6-6310 AMD processor supporting internal graphic unit Radeon R4. This GPU is just a part of the AMD CPUS.
  The graphics AMD compatible driver is already listed on the page of the Toshiba UE driver under:

  -Laptop
  -Satellite
  -Satellite L series
  -L50D-B satellite
  -PSKULE
  -8.1 Windows

• New laptop - you see is not the local copy of the library

  I've always had my library (500 GB) on a USB external drive. This has never caused a problem for several years.

  I recently got a new laptop (Lenovo X 250 Windows 7) and I'm working through the implementation. I downloaded the latest version of iTunes... went in the preferences... selected the former library on my external drive folder... nothing. iTunes don't even see.

  After some research on these forums, I followed plan, hold the SHIFT key while opening iTunes to force it to create a new library on the hard disk external. I did it. Then, as indicated, I moved all my media in the newly created iTunes Media folder. Progress! iTunes can now 'see' the library... but all the content is marked with the meaning of the cloud logo I need to download it. So, if I do not have wifi... I can't play any content, even if it is attached everything locally.

  I did a test and click download on a song. The result was iTunes there duplication in my local library by adding a '1' after the title of the song. I checked all the multimedia files are indeed still on the local disk - they are not lost.

  Suggestions on how to get iTunes to consider this as a local library?

  See the following tips for use.

  Make a portable split library

  Fix iTunes for Windows security permissions

  Empty/corrupted library iTunes after upgrade/crash

  If your entire library was starting with the outside so it should be possible to get it working again. If this isn't the case, you can ensure that you build it correctly this time.

  Regarding duplicates see Re: deletion of duplicates in the library. Note that everything in the media folder must be connected to iTunes first for this script to work.

  TT2

• iMac mid 2011 - GPU problem - no guarantee - not under replacement program

  Hello, I have an iMac 27 inch mid 2011 (bought on 28.05.2011 including Apple Care). The screen went blue and the iMac last weekend had problems at the start (screen stuck on gray - boot loop). I figured well known GPU problem , so I took it to my dealer.

  Diagnosis: GPU problem, but given that the replacement program ends Apple decided that I have to pay for repair costs: around 600 euros.

  Apple has decided that they will replace the video card for free for four years after the first retail computer sales. I am deeply disappointed by Apple since I am an Apple user since 1992 and it feels like they have let me down. Apple knows clearly that there is a problem with the video card. It seems that I have no chance that my iMac was not showing no signs of video card problem earlier. I can't use my iMac a lot because of work, so if I had turned on the iMac, a little more or let run together weeks I would have had more "luck"?

  Thanks, I called Apple and asked if they would reconsider their position, but the assistance service said they couldn't do anything for me. I kindly asked the Assistant if he could talk with his manager, but it did not help.

  Is there something else I could do? I am disappointed by Apple because I think they don't care for users for a long time and they force you to buy a new iMac. For iPhone 5, there is a program of replacing the battery. I took mine to my dealer, but my iPhone does not apply to Apple, the battery is quite good. So, if I had taken my iMac to the dealer with no sign of problem that apple would say, it does not apply to the video card replacement program.

  Is it possible to convince Apple to take care of my video card problem? For the moment, I agreed to pay for the fix, I need my iMac, but I will continue to find the solution of Apple (refund or half the cost).

  Y at - it advice in this regard, how can I convince Apple changing its position?

  You do not discuss Apple on these forums, we are all users like you. Apple does not read or participate in these forums. If you have a problem with your iMac, bring it to a Apple Store or call AppleCare or Service customer and plead your case.

  Good luck.

• Problem with my file in the SupportVIs directory found deployment package and not the Destination directory specified

  I have a little problem with a package of teststand.  I wrote a few screws to provide a wrapper around a custom DLL to provide the error handling. These screws use the following call library functions as indicated below.

  

  After installing my application, some of my screws are my DLL custom in the correct destination directory and other parts that are in the Directory Support screw which creates the deployment. The problem is that the DLL must be installed in a specific directory, because it uses the other files that are in this place-related directories.

  Currently I work around this problem by running the installer, and then manually delete the DLL to the folder of the SupportVIs dirctory.

  Does anyone have any suggestions on how to fix this?.

  

  

  Hey,.

  So, what seems to happen, is that your VI sees that DLL as a dependency and wants to keep with her VI.  I can't find a way to the deployment tool to do what you ask, however, here are two ideas that could solve your problem in other words.

  Do you need to have your DLL in the precise place?  If this is not the case, why not in your VI on your call library function, check specify a path on the chart.  Then, on your diagram, you generate a path relative to the location of the VI.  In this way, it's okay if your DLL is located in the support of screw

  Another idea would be after that installation is created, you can create a batch file that runs the installation and then automatically delete the DLL support VI place.

• 'Library not found or failed to load' on the other system

  Hi all

  I searched a bit on the forum and found similar problems, but not really a solution. So I'll give a try with this post:

  I have two similar computers: Windows 7, 64-bit, Labview 2011 (service pack 1) is installed.

  And the goal is to acquire images of an acquisition card BitFlow.

  BitFlow software provided for the frame grabber, which has been tested for windows 7, 64-bit and Labview 2011. With a machine (machine A), the program works very well. No problem.

  On the other machine (machine B), Labview is unable to read the supplied library: after selecting the library in the library function node call, Labview gave the error 'Could not be found or failed to load library' on the node library function call.

  Machine b - in all my knowledge - the same configuration of all software compared to a machine, so I don't know what the problem is here. The only difference is that machine B has a different computer security protocol - but it has administrator rights...

  In addition, I tried a stand-alone executable file (and the installation program) who worked on a third computer, but not on the machine B - because of the same problem.

  Does anyone have an idea what direction am I looking for the solution? Or what may be the problem? Or what I'm missing here?

  Let me know if you need any additional info.

  Best regards

  Michael

  Haverdings wrote:
  "Library could not be found or failed to load." I guess this would mean a "failed to load" error (because the library is present), but I don't know that the 'fault' it is.

  Bitflow is installed by simply copying the files on your computer. No installer is required - even though they claim. Is there a way to check if the required version of the C runtime is used?

  Thanks for the replies

  Well, then the message could be more developed and make a difference file not found explicitly and not being not able to load, if LabVIEW would make some extra humba mumba woodoo, that's exactly what Windows shows a request when he tries to load a DLL. This code error, simply said, sorry, I could not load the DLL and that could be because it does not exist, but also because I couldn't load it for other reasons, such as the missing dependencies, (a corrupted OS or anything else). Not very useful to you, and I don't know LabVIEW must try to be smarter than Windows here, trying to see if the DLL actually existed. For all it's worth can be a text file or what is not a DLL, the DLL name!

  An interesting read that actually explains the problem a little more can be found here. You see that it isn't a problem of LabVIEW but just about anyones problem faced DLLs that can go just about anywhere.

  The best way to see what your DLL dependencies, is to charge with the program of the mentioned dependencies in this viewer. He has problems it is today on Windows 7 systems, but still can give you some useful information.

• Error: "the instruction at 0x010acd0c referenced memory is not able to be read. "SQLDUMPER library not initiation" to start Windows XP.

  Original title: SQLDUMPER library initiation.

  From the start of my computer, I get the following error message:

  "The instruction at 0x010acd0c referenced memory is not able to be read. "SQLDUMPER library not initiation.

  What can be done to perfect this problem?

  Dump SQL program is a program that helps you to debug the SQL database on your system crashes.

  If you don't have SQL Server installed on your system or don't know what it means, that the software SQL debugging could subsist a trial version of the software you installed and uninstalled then more late leaving the program SQL dump and now he doesn't know what to do with himself.

  Take a look in Add/Remove programs to something like this:

  Microsoft SQL Server VSS Writer

  If find you it and know that you are not using SQL Server, uninstall Microsoft SQL Server VSS Writer, restart and see what things look like.

• "Library not registered" in Vista Home Premium in network and sharing Center trying to activate the password protected sharing.

  Trying to activate sharing protected by password in the network and sharing window I get the error message "library not registered. Also, in media player, I get always an error of sharing multimedia. I think that the 2 mmight be bound. PLEASE HELP ME!

  Hi Dj,

  When he the accur first question?

  Have you tried a system restore to a point before the question accurred?

  You can follow the procedure as described below:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow steps 7 to place the computer in his usual when you finished the clean boot troubleshooting

  Do the system restore to a date preceding the accurred question according to the link below:
  System restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Reply back with more information for you to help

  Kind regards

  Kiki

• loaded call of duty 2, but will not be executed, the library not registered

  I was able to actually load the game (I can see it in programs), but when I try to execute a notice appears saying there are compatibility problems. (I ran the program under xp3 compatibility, vista2 etc..) I touched the program anyway and "library not registered" comes back every time.  Very frustrating.

  This solves a problem I've been working on for months.  I have never messed with 10 windows experience - has been a long pain without any benefit.  It DOES nothing again - except mess up COD 2.

  Thanks again.  Uninstall KB3086255, run as COD 2 Windows 7 admin and you're ready to go.

• Media Player problem - library not updated

  Hello

  I had a problem with my windows media player - it's are more updates from the music library.
  Initially, the problem was with my i-tunes purchases only. I would like to download - it would save in my music folder - appear in my library of MP - then disappear from the library. He's doing the same trick with CD Ripper using the MP.
  Trobleshooter told me that the files were corrupt but did not say who. Subsequent verifications and bugs says everything was ok, but this is not the problem is still there.
  I have the version 12.0.7601.1754 for Windows 7 WMP12

  The indices of solutions?

  See if that does something positive,

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

• rendition iPad Folio published but not listed is not in the library of the app

  I created a folio for iPad (1024 x 768) and a folio for iPhone (1163 x 640) and published "renditions" (same folio name, publication name, folio number and product ID). I have published these direct and free. I see them both as "renditions" when I connect to my account on Adobe Content Viewer on the iphone and ipad, but the rendering of the iPad does not appear in the library of the live application. The iPhone folio appeared successfully in the library of live app on my iphone 6, but my colleague downloaded th same application on his iphone 6 and its not appearing in his. I have updated their a few times, but no change. Any suggestions welcome, thank you for your time!

  I solved this! The problem was that the ID of the product is identical to an another folio in the account. The product of a set of "renditions" ID must be the same, but it must be different from all other folios in the account.

• Illustrator does not recognize my GPU NVIDIA 920 M, what driver is up-to-date. Even with my Intel Graphics 5500 which is recognized, I'm not able to turn the GPU performance. What can I do?

  Illustrator does not recognize my GPU NVIDIA 920 M, what driver is up-to-date. Even with my Intel Graphics 5500 which is recognized, I'm not able to turn the GPU performance. What can I do?

  In addition, all the menus to stay for a while and then disappear. I have to be fast to all operations, including by opening a file, apply an effect or export a file.

  Images:

  

  Jonathan,

  I'm afraid that you are locked into the GPU problem, described by butz in post #13 here:

  https://forums.Adobe.com/message/7773402#7773402

• Hi, why my color is not the same between the library and the development.

  Hi, why my color is not the same between the library and the development. The color is yellow in the library... I'm not problem before windows 10...

  thx for your answer...

  The upgrade of Windows 10 has probably replaced you previous monitor with an incompatible profile mode. Calibrate your monitor or assign the previous monitor profile to your screen

  http://Windows.Microsoft.com/en-us/Windows7/change-color-management-settings