SRM with different DELL/EMC CLARiiON systems

Similar Questions

• SRM with different CPU clusters?

  Hey guys,.

  I can't find info on it so I hope someone can point me in the right direction.

  In SRM, geographically dispersed clusters can have different CPU providers? A group would be entirely AMD and the other an Intel.

  I have no experience with MRS whatsoever, and since the VM will be restarted remoetely I think that it would work. If it was me, I would

  remain consistent even if

  Please consider my response as 'useful' or 'proper' marking

  If I understand your question, you will not have a problem with different types of CPU in your clusters to protected site vs.recovery...  The only downside that I can think of is to old versions of Linux not having only not modules loaded into the kernel of the architecture of the chip.  I've personally done this and still have a single cluster of Intel that retrieves an AMD cluster, all virtual machines of RHEL 5.

  Tim Oudin

• DELL EMC CX600 FC SAN with ESX4.1 or ESX4 reference

  Hello, I try to integrate with a Dell EMC CX - 600 existing ESX4. My ESX (QLOGIC QLE2460s) HBAs are connected to 16 ports (only 8-port active), FC of McData Sphereon 4400 switches. My first problem is that I can't access the first McData switch. I'm looking for my customer documentation in the hope to reset this option to the factory settings and rebuild the configs. It's neither here nor there. My main concern is that when I rescan my HBA in ESX, I see no LUNS. Also, I can not add the ESX Server to host my list in the mgmt of navisphere WITHOUT GUI. I read that even if the SAN is end of life, there is running ESX 4 with it, users. I also read that I wouldn't need to install the navisphere agent in the ESX service console. Can someone point me in the right direction? I have not all areas set up for the new ESX hosts. What is a bond? Forgive my ignorance, I'm not very experienced working with fiber channel. Any idea is appreciated. What could I do it wrong? I checked that the McData switch does not block ports ESX (a switch that I have access to). Thank you.

  Unless you have zones configured on the switch, you will not get very far and will see the behavior you described.  You need enter this McData switch to configure the zones.

  -Matt
  VCP, VCDX #52, Unix Geek, Nerd of storage

• Distributed replication of file system between servers with different performances

  If the published file system replication is set between servers with different performances. What will happen with the fastest server performance? The performance will shrink to match the performance of the server in the slower string?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Stock of access with different Adobe ID without messing with my system ID

  Outside the use of other libraries stock, I sometimes used a Dollar Photo - who bought Adobe.

  Photo of a Dollar has always been a good resource for small editorial due to its price-point - discussion for another day...

  Now that he's under the banner of Adobe, I have a problem of access to the services.

  I created a separate "floating" adobe ID and cloud-account for a member of the team to a short-term contractor access to tools such as being an account that everyone in the company can use to access stock-guarantee. Makes it easy to control stock-spending and control.

  I cannot use this account on my workstation, since it conflicts with my Adobe ID, connect, then Photoshop does not work, ask me to activate again...

  Adobe stock is so useless to me unless I'm willing to go through it and use the demo files, connect different system, buy and send to myself.

  How can I use it in a team setting where different members of the team with their own ID Adobe needs to access the stock market with the id of 'General' or 'shared' as we do with other actions-sites that we use.

  Well, you can access an account created with a single ID when the account is created with a different code. It's like access to Facebook or any other site that requires authentication with different accounts.

  Having said that you do not have a few other options. You just have to identify you on the site Web of Adobe Stock with the ID that you have set up with actions. You don't have to log out of your Adobe applications. Once in Stock you can allow the images and save them in a library. Simply share this library with your main account and you will have access to them. You can share this library with as many people that you have in your company. No additional connection or deactivation and activation required. And no need to use two computers.

  Another option is to Stock for the teams. If you are using a fair share of images among other members of your team or your staff, maybe it's even a better road.

  But using libraries (essentially the same as light boxes on other sites) you should easily be able to do what you need without having to change computers.

  Hope that helps. If this is not the case, can you explain further your workflow and maybe I can be able to offer another solution for you.

• I am installation 5.1 SRM with EMC Recoverpoint

  Hi all

  I'm looking for more help on SRM 5.1 with recoverpoint instalation.

  I have instaled SRM 5.1 on two sites and two matching sites now. I'm confused about the Recoverpoint version works with MRS 5.1.

  Please post the link to download the version of EMC Recoverpoint approperate.

  I am looking for a document updadated on SRM with recoverpoint instalation. I've already gotten below mentioned two, but he's too old.

  http://www.EMC.com/collateral/software/technical-documentation/h5582-VMware-site-recovery-manager-with-RecoverPoint-implguide.PDF

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1014610

  I get an error every time I connect to vcenter and connect to SRM plugin. I enclose the screenshot, then I type my ID for matching sites.

  
  

  Post edited by: thomaskuttyjohny

  I got the details

  VMware vCenter 5.1

  Site Recovery Manager (SRM) 5.1 Server

  Replication RecoverPoint storage (SRA) 2.1 adapter

  RecoverPoint 3.5 SP1 or later version

• The Dell printer cannot communicate with the Dell computer.

  It seems that suddenly my Dell AIO 942 printer cannot communicate with my Dell Studio 17computer.  These devices have been the transparent connection until two days ago.  I've set up a restore point, I installed the drivers, unplugged and re plugged 110 s and USBs, used different ports and I still have the same, printer cannot communicate with the State of the computer.   Copy and scan functions are good, Windows Vista operating systems.  How can I find these devices to their previous state of communication?

  Jesse,

  Thank you very much for the detailed information. It really give us a head start trying to solve the problem.

  Please answer these questions to get more clarity-

  (1) what are the other steps in troubleshooting tried by you so far?

  (2) other changes on the computer that I should know about?

  In the meantime, I have you refer to items offered on the Dell website - troubleshooting

  http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-942/research

  You can also have a look at the Microsoft article as well-

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Get back to us with the results.

• Alignment of thread with different screen resolutions

  I noticed that block diagram wire positions/alignments can change, sometimes significantly, by switching to screens with different resolutions.  There is a ton of information on the maintenance of the proportions on the front panel as the solution of problems, but I can't find how to mitigate the problem with the wires on the block diagram.  Does anyone know how to best handle this?

  Thank you!

  crossrulz wrote:

  I never noticed the block schema change due to screen resolutions.  I saw this kinds of problems during the change of system fonts.  For example, switching from XP to Win7 meant go to police Aero, which is a font more great than XP used to its default system font.

  That's what I noticed as well.

  The solution is to set the blockdiagram fonts in the LabVIEW.ini be specific font rather than a system font.

  Something like

  BDFont = "Tahoma" 13

• Dell Inspiron 2650-system of operating Windows XP. I am unable to connect to the internet. Status: Network cable unplugged. Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  The network port is the port on the laptop (it is not that large - look around) that looks like a large phone connection.

  You have a router/network to connect to and a cable network to connect with?

  Look at the 'Network option' part of the poster:
  http://support.Dell.com/support/eDOCS/systems/ins2600/placemat1.PDF

• I just bought a Logitech Web c110 camera and every time I try to install the installer crashes. Also, I was making the blue screens with different messages on them.

  Original title: how to find missing or corrupt files on windows xp pro

  I just bought a webcam logitech c110 and whenever I try to install the installer breaks down and I was doing the blue screens with different messages on them... How to scan for missing or corrupted files?  My brother-in-law has built this computer for me and I did not all disks for windows xp pro. system that is on it

  Hello

  1. you receive an error message while trying to install the webcam? If so, then post back the exact error message.
  2 are you able to install any other software?

  Try to capture the error message on blue screen and after return the exact error message. This could help us help you better.

  Step 1: Try to install the webcam software in clean boot state and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• If I can reinstall XP pro on a 'white box' PC using a disk with a Dell or HP? I have my product key. If I can't, then what?

  My 'white box' PC is all buggy after a lot of use, and I want to start with a reinstall.  I have my product key XP Pro but no media.  Can I use a disc that came with a Dell, HP or other PC manufacturer?  The steps, what are my options.

  Thanks for responding.

  No, you cannot use your support Dell/HP OEM to install XP on a generic computer built. Installation media more computers brand is locked in BIOS for motherboard of that OEM (Dells are). In addition, most HPs have just a recovery disc and not a real disk operating system. As for using the product key you have, it's from the CD that you used initially install XP on the generic construction machine? If so, will need you a corresponding version installation CD; namely the retail Home/Pro/MCE or generic OEM Home/Pro/MCE.

  If it were a copy retail:
  How to replace lost, broken, or Missing Microsoft Software or Hardware - http://support.microsoft.com/default.aspx?scid=KB;en-us;326246
  MS - MVP - Elephant Boy computers - don't panic!

• Problems with Windows Installer after using System Mechanic.

  I had a problem with my Dell 2 years and was told by the Support Dell buy iolo System Mechanic. However, now I have problems with Windows Installer (it is not installed correctly) and I've read that this can be caused by the registry cleaner in the iolo System Mechanic.

  So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

  Thank you!

  original title: Registry Cleaner/Windows Installer

  So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

  1 no, the registry cleaners can give you immediate relief, but they are a big pain in the long term.

  2. follow the four methods listed in the resolution section of the following article:

  http://support.Microsoft.com/kb/2642495

• I can't read the .avi files with any program on my system.

  I can't read the .avi files with any program on my system. Have several programs that all of them played before September 2010, like the classic, windows media center windows media player media player, Director of windows, windows, 5.3, video programs video ulead dvd creating toshiba. Nothing works, frustrating not being able to download videos from two different cameras and burn them on DVD. I get an error of almost all the programs, saying that it was unable to load the required component, but I can't determine what this component. I tried to reinstall the codecs again non-joy.

  The free utility GSpot to identify the codec that created
  a .avi file... maybe it will help solve the problem:

  Download GSpot
  http://www.free-codecs.com/download/GSpot.htm
  (left-click the text: "Download GSpot")
  (on the next screen...
  left click: 'Download [GSpot 2.70]')

  You don't have to install it... just unzip the file and
  GSpot.exe left click to launch.

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html

  Evaluation of video files and Codecs with GSpot
  http://www.windowsmoviemakers.NET/PapaJohn/68/GSpot.aspx

  Good luck.

• reinstalled Windows Vista on a HP computer with a Dell reinstallation DVD.

  I have already downloaded all the HP software & drivers that I need to make it work like a HP., everything seems normal & tact except in the reception centre where it tells you all the details of your computer, it said its production is Dell & must say HP. The product key on the side of my computer is of course for a HP. Until it is recognized as a HP & not a Dell, I can't activate my windows with this product key.

  * original title - I reinstalled Windows Vista on a HP computer with a Dell reinstallation DVD. Now, I can't activate Windows because my product key will not work. *

  You'll have to contact HP and see if you can get a set of restore from HP for your system disks, you will not be able to activate the copy of Dell's Windows with a key to HP.

  "AnitaFatBowl" wrote in the new message: * e-mail address is removed from the privacy... *

  I have already downloaded all the HP software & drivers that I need to make it work like a HP., everything seems normal & tact except in the reception centre where it tells you all the details of your computer, it said its production is Dell & must say HP. The product key on the side of my computer is of course for a HP. Until it is recognized as a HP & not a Dell, I can't activate my windows with this product key.

• An image work gold with all dell computers?

  Hello
  I am new to Dell image help so I want to know that the image created by DIA will work with all laptops dell and computer?

  Hello, ImageAssist An image will work with most Dell Latitude, Precision and OptiPlex systems. Some XPS and place systems as well. The operating system must have been offered on the system of the factory for drivers to be available as well. [See the complete list of systems supported at this location: en.community.dell.com/.../11438.dell-family-driver-packs:550:0]