SRP521W fall short

Hello

We use a SRP521W as the main router to an office with about 25 users.

On the cable network is about 25 computers, phones IP 25, 3 printers. Wireless network take some smartphones and tablets. Traffic from the computer is 100% Office remotely.

That said, for the last few days a network connectivity sucks. I think the problem is, precisely, the SRP521W. Some mornings the WAN link is down and can only be raised by a reboot of the router.

There is a tunnel IPSec at HQ.

Wireless network was recently transferred to a WAP121 to unload the SRP521W. It has two networks: internal and customers with two VLANs.

The CPU usage is about 30 to 45% all day and sometimes the spikes to 100%. RAM usage is 40-45%. I don't know if it's 'too', 'medium' or 'very low burden '.

Anyway, the time for questions:

one) how can I get a table of active on the firewall/NAT connections to see if there is something 'strange' on the network ensuring that may be causing issues?

(b) is there any bug know-how in the management of VLAN the PRS that may be causing the problem? (this is one of the last changes).

(c) if the problem is that it is too load for a little such router, what alternative would you recommend given the above details? (remember that I have not really wireless router, as I have the wap121).

Thank you very much for your help!

Marc

Hi Marc, thank you for using our forum, my name is Johnnatan I left the community of support to small businesses. I apologize for the problems you are having, I will share with you information to help you with your problem.

1. this router has not been done with log control, but I found in the administration of the unit how guide enable or disable temporary Logs. You can see here

2 just to make sure that the latest firmware is 1.01.27, I encourage you to download it and install it if you don t have later, you can download it here.

Before starting the process, I advise you, create a backup of your configuration, the firmware update and then perform you a reset, after that, try your configuration again. If the problem is back again once set up manually just the necessary configuration

I hope you find this answer useful,

"* Please mark the issue as response or write it down so others can benefit from.

Greetings,

Johnnatan Rodriguez Miranda.

Support of Cisco network engineer.

Tags: Cisco Support

Similar Questions

  • Palm 755 p falls short in something just for me.

    I bought my Palm Treo because I am often making appointments and I needed a friendly calendar app user with a display of the hour by hour. This phone has been about what I needed, and it blows away the competition in this aspect.

    However, the only characteristic that it is absent, is the ability to take the coordinates of a current phone call and regular plug it directly into a slot on the calendar of the hour by hour.

    So, I'm not sure where the appropriate place to make suggestions, but this feature would be an astonishing upgrade for future phones or even as downloadable upgrade to the current 755 p.

    Hello and thank you for using the Palm Help Forums!

    We appreciate the feedback and Palm is always looking to improve the products. However, there may be there a 3rd party application that can perform this function. I would recommend from www.freewarepalm.com to seek an application that fits your needs.

    I hope this information is useful and please let me know if you have any questions or concerns.

    -Pat

  • What happened to customer support?

    It seems that Apple has forgotten customers along the way.  I have been struggling with my iPhone for about 6 months... and it does not work.  I spoke with not less than 10 "Senior" advisors to solve problems and each of them said 'ILS' would be the one to solve it.  6 months and I have not heard a thing from ANY of them.  The reason for which I had no less than 10 is because I have to keep the call to know why I have not been contacted, and if nothing is done yet.  I get a new rep who takes responsibility... and we start again.  A rep sent me a free, external $ 250 HDD for my troubles.  He's very nice, but my phone still does not work.  I believe that the last time I called on this issue has been more than a month.  I gave up and I use workarounds with my phone.  In the process, I lost all my texts.  This may not seem like a huge loss... but for me, I had the very first text I've ever sent since the first iPhone.

    Now, today I just got got off the phone with a "man" who tells me that a refund can take up to 30 days!  He also informed me that he could not talk to my bank on the issue of letting them know that there is a billing error.  I was charged $380 when it should have been $378.  For this reason, I was charged for $380 but they refund $378, which does not correspond to my Bank... and they cannot fix.  Add to that the brevity of the agent and apparently no empathy for the situation.  At some point, I stopped for about 15 seconds because he kept talking about me.

    I used really really praising Apple's Support.  I really felt it was the best support on the planet, but it is really falling short nowaday.

    I feel rejected in both of these situations and must change.

    I'm sitting here today without my money... and the Apple support showed me how much they care about that!

    I don't even know if it's the ideal shape to complain.

    It is not. This is a technical support to the user forum, so we have nothing to do with Apple Customer Support. We work with others to solve problems. Since you're here, why not share with us what is your problem. You never know if someone here has run on it at one time or another.

    If you click on the link contact us at the bottom right of this page, you will see all means at your disposal to contact Apple about your customer complaint.

    Good luck

    GB

  • HP Envy 15-J039tx: graphics - upgrade

    Hello and good evening everyone.

    Is it possible to update my laptop graphics card?

    Current record being:

    HP Envy 15-J039tx

    NVIDIA GeForce GT 740 M (2 GB dedicated DDR3 memory)

    2.4 GHz Intel Core i7-4700MQ

    8 GB 1600 MHz DDR3L

    I don't want to open my laptop and check for me if it is integrated or separate housing arrangements.

    In addition, how to check what is the limit of upgradation.

    Need help please guys, I would have

    Thank you.

    Cadence is like the speedometer for the video card. More power equals more images per second. The higher the resolution, the more power, keep the same pace. To drive a screen UHD (4 k or even 5 k) a powerful video card to demanding games at a playable speed. Anything more than a year will fall short. You face the eternal dilemma. Everything you buy will not upscale within 90 days. But it is a good time to buy as we just went through a major upgrade point; Skylake platform is a game changer and if you get something with a 6th gen i7 and a 4 k monitor and the best map video there now, you will be good for years to come.

  • By Satellite C50-B-15J support standard SATA 3?

    A month ago, I bought a Toshiba Satellite C50-B-15J type of laptop.
    I've included a Friday Intenso 128 GB SSD that was inserted in place of the original HARD disk.
    The original, STRANGE HARD disk and a chassis Assembly in place.

    Go ahead everything correctly, but available by important SSD speed test falls short speed SSD SATA3.
    My question (it is not in any specification) for the chipset of the motherboard supports SATA3 if the standard?

    He is such a relatively new model, one would certainly expect.

    > It is such a relatively new model, one would certainly expect.
    New model doesn't mean better and higher standards. Laptops are available with different hardware platforms, cards mothers, chipsets and processors.

    The exact specification of your laptop model is not known to me, but you can check the transfer rate using various tools such as CrystalDiskInfo.

  • Is it as easy to make statements of income using the iPAd as a laptop?

    I have ios9.2 of the iPad. It's easy to do your tax return with the iPad uses a tax applications, for example Turbo tax?

    Versions of regular computer of these programs cannot and do not run in the iOS.  There is a TurboTax for iOS, but I don't know how complicated a situation back it can handle.  I have never studied what I doubt, it can accommodate the complexity of my return to remedy this I always use TurboTax for OS X and its implementation of full functionality.

    TurboTax for iOS is a free application, so you can always try.  A snapshot of your W2 if you just drop, it seems that it should be good.  If your situation is more complex and requires information and additional forms, it can fall short.

  • Change in gain on the PXI-6221

    Hi all

    I apologize in advance for a newbee question. I recently started to work on the measurement of force in the laboratory of fluid mechanics. We got a load cell 3 - axis with 0.5 mV/V, power per channel, which I hung on SG24, which sits on SC-2345, connected to the PXI-6221.

    As far as I understand, after the signal comes out SG24 unit, it is amplified to 500mV and powered to PXI card, which in turn have 4 possible gains of 0.2V, 1V, 5V, 10V. To keep the resolution as fine as possible, I'd be interested take a +/-200mV gain, which in turn cut my signal more then half but keep a resolution ~ 6.1uV, I like not having the range, my forces expected fall shorter reach.

    The problem is that I can't find neither manual or MAX a way how truly change the gain. If I open MAX > NOR-DAQmx devices > PXI-6221, I see no possibility to change the input voltage. I can see +/-10V in the Test Panel, but if I change to +/-200 m it resets at + /-10, after I close and reopen again.

    Can someone help please on this issue?

    Thanks in advance

    Hi Chris,

    You made my day )

    Thanks a bunch!

  • Change a drive letter

    In June, I bought a WD My Book Essential external hard drive. When I installed it, it falls short of the letter 'K', which was the next player.

    I just got the replacement and it took more than one of my removable drive letters "J" and I can't change. I asked WD in this regard and they had no answers. I can rename the letter IN the alphabet, but I can't go 'UP' in the alphabet. Microsoft wants $100.00 for the contest.
    I checked Google and just receive the same information.

    Any ideas?

    genedm

    Take everything that is installed in the 'K' and change it to 'X '.
    Change of WD to 'K '.
    Change 'X' to the letter what you ever free

    If you can't do it in your operating system (you told us what it was that we could tell) you can download an app like partition disk suite (trial), he'll do

  • Need instructions step by step to make a video call via facebook.

    I installed cd and my new life Cam movie camera works fine on the computer (Vista).  I don't know how to make a video call?  The instructions which have been contained in the box for Window Live Messenger seem to fall short.

    Do you have an instruction step by step on how to connect with another person to have a live call?  Thank you

    The following link might be worth a visit:

  • 2 tunnels vpn site-to-site location A to B

    Hello

    Current:

    I have an ASA 5505 (8.2.x) deployed on a client site with a public ip address provided by the customer.

    I have a tunnel from site to site between us (site A) and client (site B).

    ASA (at the client) has been installed with 2 VLAN by default (one for outside, one for the Interior using the 2-7 ports).

    Future:

    The customer wants another tunnel from site to site for a separate project, but they want to use the same ASA but uses another port configured for a schema from a different ip address for this new project. (which means the same ip address public, but different vlan IP).

    My Actions:

    (A) my first reaction was that I could not do that, but since it's customer and I must find a way, if I can reconfigure client (site B) ASA to take a port and configure it to a vlan different (using the system of intellectual property for this project) and set up a second tunnel from site to site using this vlan?

    (B) can even reconfigure a port for a third vlan on this SAA? (customer ASA 5505, 8.2.x, per seat 10 credits).

    What is the best approach to accomplish this task?

    Thank you...

    It's a strange question - technically, you could - I think that the place where you will fall short is that it uses the same peer address at its end.  I don't think that it will eventually operate favorably... never tried.

    I don't really understand the need for "another site to site tunnel" however.  Theoretically, I could be wrong here, there is only need a tunnel of the phase 1 of IKE.  There may be several IKE tunnels phase 2, communicating through the tunnel at the same time, however.

    Why not let the equal relationship as it is, expand your (and his) internal/external cryptos and go from there.  8.4 ASA supports twice nat - which could be a solution if he has questions on its end.

    And to be honest, even the ASA 5505 that I helped set up were all on the remote site, and I'm sure that each of them exists only for the purposes of a single site to my organization.

    Perhaps explain WHY he wants to do what he wants to do it too?

  • HP Mini 110-3600 sd screen problem

    Hi all

    I have a problem with the screen of my HP Mini 110-3600 sd (product code LD078EA #ABH). Yesterday morning all of a sudden it became too small for the content, which means that the bottom was not visible (for example windows, I use windows 7 starter edition). To be clear, that the full screen doesn't work, if I maximize the view, it's actually too short. The night before, it was working fine and I did not install anything until I turned it off.

    I tried to install the new drivers and using the different resolution but nothing seems to work. What I find strange is that when I look at op the specs of this laptop it says it works at 1024 x 600, but the pc is recommended to run in 1024 x 768 60 Hz. (The screen has never been replaced) The laptop seems to be confused about her size and position, if I chose a resolution '1024 x 600' and 'centre screen' it looks like the screen space, but he put a black in the top column, so that in the end, she always falls short. And, although I'm not sure about this, I thought the laptop used to support a higher resolution, before this problem (1360 x 768 perhaps?).

    Below, I've included a story on the monitor (or pilot), if more info is needed I would bring him a pleasure (but I'm not experienced enough to know what you guys should be now).

    Intel(r) Graphics Media Accelerator Driver for Mobile report

    Report date: 31/08/2013
    Report time [hr:mm:ss]: 16:18:43
    Driver version: 8.14.10.2230
    Operating system: Windows 7 Starter *, Service Pack 1 (6.1.7601)
    Default language: Dutch
    DirectX version *: 11.0
    Physical memory: 1011 MB
    Minimum graphics memory: 8 MB
    Maximum graphics memory: 249 MB
    Used graphics memory: 93 MB
    Processor: x 86 family 6 Model 28 Stepping 10
    Processor speed: 1662 MHZ
    Vendor ID: 8086
    Device ID: A011
    Review of the unit: 00

    * Accelerator information *.

    Accelerator in use: Intel (r) Graphics Media Accelerator 3150
    Video BIOS: 2036.0
    Graph current mode: 1024 x 768 True Color (60 Hz)

    * The devices connected to the graphics accelerator *.

    Active screens: 1

    * Laptop *.

    Name of the monitor: digital LCD-scherm (1024 x 768 60 Hz)
    Display type: digital
    Gamma value: 3.54
    DDC2 Protocol: support
    Maximum Image size: Horizontal: not available
    Vertical: Not available
    Watch taken Modes supported:
    1024 x 768 (60 Hz)
    Display Power Management Support:
    Standby mode: not supported
    Standby mode: not supported
    Active off the coast of the Mode: supported
    Raw EDID:
    00 ff ff ff ff ff ff 00 36 03 00 03 00 00 00 7f
    2f of ff 0c 01 03 80 00 00 00 00 a0 00 57 49 9 b 26
    10 4f 48 00 00 00 01 01 01 01 01 01 01 01 01 01
    01 01 01 01 01 01 64 19 00 40 41 00 26 30 18 88
    36 00 00 00 00 00 00 18 00 00 00 00 00 3 c 00 fd
    EB 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 68

    * Other names and brands are the property of their respective owners.

    I really hope you can help me, because I am abroad and need the laptop to support my study.

    Thank you

    I see. Thanks for letting me know that. I see some other posts on this thread that mention check video cable as it passes through the hinges. It is a common problem for all laptop computers with cables video/camera/wireless antenna through the hinges.

    Here's your Guide to Service and Maintenance. Display Assembly removal starts on page 61.

  • What is the failure of the system to defragment effect the failure to save?

    Well, I posted this question before, but I think I've ruled out the obvious questions.

    My laptop was backing on a schedule like a charm until May-June when something happened. The last good walk back was in may, and no matter how I put the back upward, custom/windows recommended, make an image etc. I constantly get the message "backup failed" and that the annoying red bar.

    I thought maybe it was the external hard drive, which windows recommends that you use as a backup. In fact, I used this external hard drive before and when my hard drive crashed, it was a God send when I had to reinstall the operating system and all of my personal software.

    Anyway, I always noticed that when I would defragment, which is on a schedule, he used to always say 100% defragmented. All of this, the C drive, the HP system recover and HP tools.

    HOWEVER, I noticed that the system will not defragment completely. It has 5% not degragmented. It took place around the same time that the loss of the ability to save.

    (I saved on DVD but I wish she could be like it was before, updated the back ups periodically according to a schedule).

    Thus, the system refers to the registry? I know the least about how to deal with this. I fall short, I don't know how to fix it. This may be the reason why now the backup that is in my book - not the software provided with the Passport, but microsoft backup hard drive - does not work?

    If so, how can we get the system adjusted? Or register if it is what it is.

    Thanks for everything very specific advice for someone who doesn't know much about the registry.

    I suggest avoid you the Windows backup program and you get a good commercial backup program. This forum meets for a windows problem reports. I know that I was very impressed when I tried it. Three I'm familiar with and like Norton Ghost (which I use for 8 years no 1 problem), Easeus Todo Backup free, you can download it from

    http://www.TODO-backup.com/products/home/free-backup-software.htm and Memeo , which has 30 day free trial and you can buy it for $29.99 - you can download it from http://memeo.com . You can get Ghost for almost nothing (like me), if you look at the sales.

    The March 2012 issue of PC World is very high on Easeus FREE program, and I was recently tested in a variety of configurations and must say that I am very impressed. As Ghost will support up to a network drive and it will create a bootable CD for when your PC does not start. See commentary to PC World to

    http://www.pcworld.com/downloads/file/fid, order 80031, 4/description.html .

    -

    CNET has a lot of reviews of backup program to

    http://download.cnet.com/windows/backup-software/?tag=contentBody;sideBar .

    Some of them are free (the last time I checked there over 300), some have free trials (more), and some are buying only (more than 200).

    -

    External hard drives are the best for backup. You can get a 500 GB one for $70 and a 1.5 to one for about $90. You can also buy a flash drive 16 GB for as little as $10. It is the best insurance you can buy ever!

    -

    I hope this helps. Good luck

  • As how can Airbnb, I download my own autoplay, video looping?

    Good guys, I've been struggling with this these days. Basically, I am designing a site for a long time with scrolling and I try to make my homepage (top) a video in full screen. Very similar to these Web sites if you want to get a clearer picture:

    1. Airbnb

    2. Blu Homes

    I obviously want the video to be optimized for all browsers, while maintaining a good level of quality. So I searched for a solution that allows the following:

    1. AutoPlay & loop
    2. Download my own video through file (and not via Youtube or Vimeo)
    3. Upload an image to help Pack the video does not load for the Viewer
    4. Reagent (resizable)
    5. Playable in all browsers for desktop/laptop

    The widgets I've tried so far are are so close, but all fall short of one or two criteria.

    Recently I bought the 'ultimate video widget' Muse for you (link here) and while he seemed to tick all the boxes, my video doesn't play not return in the Safari browser... So close.

    If someone could point me to something they found who works in which all these factors, it is so amazing.

    I would be grateful unconditionally!

    Hey Evan,

    You can certainly do it, here is a comprehensive document with instructions and links to the necessary widgets you need to download,

    Please follow it even and let me know if this helps.

    Link - Add video in Muse backgrounds

    Best regards

    _Ankush

  • ESXi Hypervisor - start of the guest on the question of booting operating system

    Hi all

    I am very new to the game of VMware and I intend to start playing with free products available and to acquire a good understanding of it.

    My question that I have currenty obtained is:

    I have my desktop PC, I intend to install 5.1 ESXi hypervisor on it and then install a version of windows as a guest operating system.

    I hope that I can set up so that when I turn on the computer, windows automatically boots - so if my wife wants to use the computer, it can still, and his experience is no different. However, I can then install several other OS and turn them as and when I need and have a good game.

    Reading through the documentation that it doesn't look like this is possible?

    I know that this is not strictly the destination of the product, but it would be convenient for me.

    Has anyone encountered this before? / You know a way to do this?

    Thank you very much

    Tom Whittle

    Welcome to the community - it is possible to have a virtual machine to run at startup of the ESXi Hypervisor but where your solution falls short is you are not able to access the virtual machines in the ESXi host console - you still need another machine to run the vSphere client so you can manage the ESXi host and access the virtual machine.

  • Notifications will not be sent by e-mail - Exchange 2010

    I looked high and low, read the manual and search the forums and I can't understand it.
    Environment:

    VCenter/vSpeher 4.1 - ESXi 4.1

    vCenter OpMan 5.0

    Server Exchange 2010-1 Cas/HT 1 Server mbx
    I have vCenter opman set up to report to my corporate email address when the health or risk alerts occur at critical or immediate level.  It is set to the name of the object: checked world for all children.

    In the Console of Administration- http:// < ipaddressofvApp > / admin I have configure the smtp Protocol to point to my CASE 2010 Exchange and server HT.  I use the administrator account to vcenter which has its own mailbox on the exchange server and is a member of the domain.

    I left the ip address of the vcenter and VAPP receive connector to connect via an already configured in Ex2010.  No emails... never.

    Today, I created a new connector to receive specially selected vCenter OpMan and TLS security.  no emails

    SMTP is running on vCenter.  but I guess I'm not sure what server sends these notifications... is what the Windows Server that I run vCenter on?  What is supplied with the appliance of OpMan Quasi-linux servers?

    I looked on the Ex2010 Server tracking logs and no emails have come to the exchange of the address I have provided above.  Can what newspapers in vmware I consult to help investigate this issue?  I see a lot of documentation on how to configure these notifications, but they fail / fall short by telling you things like how to make them actually work in your messaging environment.

    I don't think that it must be complicated.  I bought vCenter OpMan so I could see what is happening, and it is not uncommon to notifications by e-mail on these things.

    I appreciate the thoughts and the time spent on this from anyone.

    Tony

    follow these steps

    (1) connect to the VM user with the admin user interface

    (2) run "vcops-admin smtp del" to RESET the SMTP settings

    (3) replace the CLI-online whole vcops-admin...

    -The log search questions by e-mail about communication with SMTP server is "analytics.log" on the "Analytics-VM.

    -newspapers to search for configuration problems (for example, by setting the parameters) are on the "VM UI', / var/log/vmware-> admin.log, vcops - admin.log and vcops - admin.cmd.log

    Thank you!

Maybe you are looking for