View v3.1 is supported under vSphere 4.1?

Similar Questions

• Network adapter (device Bluetooth (Personal Area Network) and Btooth works does not after installing W 7 Ultimate__ (Situation Reported to microsoft Hel and Support under SRX1120597135ID Without solution untill today))

  BTooth works do not after Windows Vista upgrade (Btooth works without problems) for W7
  At the moment I have problems connection BlackBerry device and other devices via Btooth
  messages 1: 'softwarfe device driver was not successfully installed ".
  message 2: "WIDDCOMM Bluetooth Software 6.1.04403 Dell Incompatible" (WIDCOMM = Broadband - manufacturer)
  In short, the list obtained messages:
  1 device driver software was not compatible
  2. incompatible software Bluetooth
  3. the drivers are not installed: lists of codes (31) (28) (10)

  Report of the final situation for Microsoft Help and Support under SRX1120597135ID (withoutany positive response so far, I have been asked to report through this forum, I hope a solution will be here)
  I tried all the options you will find in google without success.

  I contacted Dell and Bradband and I have upgraded to WIDCOMM Bluetooth Software 6.2.0.6600 available in Dell Support without positive results.

  Repost: Windows Update has nothing to do with the upgrade of Windows. Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error when you try to run Quicken 2011: this program is not supported under XP

  Win XP pro - Quicken 2011

  I am running win XP pro. When you try to run Quicken 2011 I get an error message: this program is not supported under XP.  What I do toget Quicken supported?

  For help on Quicken, I recommend posting your question in the community live Quicken .  The people there can help you better as we can in this forum of Windows. Boulder computer Maven
  Most Microsoft Valuable Professional

• I can't find the option view the files and folders under my tab options folder... Please help

  I can't find the option view the files and folders under my tab options folder... Please help

  I can't find the option view the files and folders under my tab options folder... Please help

  Assuming you are using Vista...

  Start button > in the search box, type folder options > press the Enter key > display tab > (see screenshot)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• RHEL 7 will never be a platform support for vSphere SDK for Perl 5.5?

  RHEL 7 will never be a platform support for vSphere SDK for Perl 5.5?

  https://www.VMware.com/support/developer/viperltoolkit/viperl55/vsp55_vsperl_relnotes.html#supported

  
  

  Thank you
  

  We have recently updated the Perl SDK to 6.0 U2 which now supports RHEL 7.1, as seen in the vSphere SDK for Perl Release Notes

• VMware tools on OpenSuse 11.2 under vSphere...

  Anyone having difficulties is to install VMWare tools in a race of VM (x 64) opensuse 11.2 under vSphere?  It seems to install fine, then it shows that 'no managed' in the summary of the virtual machine and the status in vcenter.  Hmmm...

  Part of the guide: Unmanaged VMware Tools

  After installing a PSB of tools on a client, the vSphere client VMware reports the status of the VMware Tools as

  unmanaged response to comments. Thus, this indicates that the PSO is installed and you should not attempt

  Install the standard VMware tools via the vShpere client.

  Follow the attachment

  If you have found this information useful, please consider awarding points to 'Correct' or 'Useful'*.

• Adobe officially support under Photoshop VMware?

  I need to convert Photoshop discrete servers for an image based on a VMware/resizing Blade Server environment.

  Adobe officially support under Photoshop VMware?

  In addition, what versions of ESX are currently tested and supported?

  I understand you may need some configs special to get licenses to work... What is it?

  Also, if some versions of Photoshop are supported and others are not supported under VMware, I need to know that as well.

  How to get to a product manager at Adobe?... For gods sake, they have a blockade of customer service to get a person who knows such things.

  Thank you

  Cody

  It is not supported in some way and that that settles.

  Mylenium

• Impossible to install any program because not supported under Vista, but my PC is Windows 7 Pro 64-bit

  I try to install Rockwell Automation Studio 5000, but I get an error message saying "Studio 5000 is not supported on Windows Visa without Service Pack 1 or higher". However my PC is under Windows 7 Pro (64 bit) and Vista that is covered by the requirements of this program.

  Any ideas?

  What is the version number of Studio 5000 you have?

  You can try to install using the "compatibility mode".

  What is program compatibility?
  Program compatibility is a mode in Windows that allows you to run programs written
  for earlier versions of Windows. Most programs written for Windows Vista are also running Windows 7,
  but some older programs might run poorly or not at all.
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  Compatibility mode - make sure to run older programs in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Windows 7 Compatibility Center
  See if your software or hardware is listed and what options you have

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Learn how to use the Mode of Windows 7 compatibility with legacy applications

  http://Lifehacker.com/5466628/learn-to-use-Windows-7s-compatibility-mode-with-older-apps

  Using Windows 7 or Vista Compatibility Mode

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Also: http://www.sevenforums.com/tutorials/1196-internet-explorer-compatibility-view-turn-off.html

  J W Stuart: http://www.pagestart.com

• Satellite A300 - 1 5 ACPI is not supported under Linux

  I have laptop Toshiba A300 - 1 5. When I run Windows absolutely everything works fine.
  But when I boot Linux (I tested the two 8.10 of Ubuntu and Fedora 10), Fn keys does not work.
  Neither is bluetooth, which is a USB hidden and disabled by default.

  I noticed that pilots * toshiba.ko* and * toshiba_acpi.ko* cannot be loaded.
  I tried to load them, but both * dmesg * and said */var/log.messages*: * {color: #000080} not a cell phone supported. {color} *.
  I also tried to use * toshset, toshutil, fnfx *, but they all need * / dev/toshiba * and * / proc/acpi/toshiba * or * / proc/toshiba * exist.
  And it is impossible to load them, because the cell phone is not supported.

  I have two questions:

  1 Toshiba plans to cooperate with suppliers of Linux in order to fix this bug.
  I have visited many Linux forums and many people's complaint they have keys functional unfunctioning under Linux.
  So, I think that if the product is thrown on the market, it must be supported, is it not?

  2. How can I temporarily fix this bug to get the missing functionality before the next version of Ubuntu or Fedora? Can someone advice any solution.
  (Well, please don't say: leave Linux and use Windows.) I want to use Linux, not Windows. "And I want a job in the same way).

  If you want additional information about a bug, I will provide.
  Thank you very much.

  Hello!

  I have a Toshiba Satellite A300 - 1 M 1 PSAGCE under Ubuntu Intrepid (kernel 2.6.27.11).

  _I realized that only Ricoh SD/xD Card does not work (it worked on VIsta). _

  Anything else is OK.

  I think that our laptops are related, take a look at my ACPI and journal modules.

  Bq. + $ lsmod | grep acpi +------+ 16400 1 acpi_cpufreq +------+ freq_table 13568 3 acpi_cpufreq, cpufreq_stats, cpufreq_ondemand +------+ 4 47800 acpi_cpufreq processor, thermal +.

  Bq. + $ ls/proc/acpi / +------+ battery dsdt event fadt fan info power_resource processor embedded_controller ac_adapter sleep thermal_zone wakeup video +.

  Bq. + $ dmesg | grep-i acpi +.
  Bq + BIOS-e820: 00000000bfe86000 - 00000000bfebf000 (ACPI NVS) +------+ BIOS-e820: 00000000bfeee000 - 00000000bfeff000 (ACPI data) +------+ ACPI: USE 000FE020, 0024 (TOSINV r2) +------+ ACPI: XSDT BFEFE120, 0064 (r1 TOSINV TOSINV00 1 1000013) +------+ ACPI: FACP BFEFD000, 00F4 (TOSINV TOSINV00 1 MSFT 1000013 r4) +------+ ACPI: DSDT BFEF1000, 7745 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: FACS BFE93000, 0040 +------+ ACPI: HPET BFEFC000, 0038 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI : APIC BFEFB000, C 006 (TOSINV TOSINV00 1 MSFT 1000013 r2) +------+ ACPI: MCFG BFEFA000, 003 c (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: ASF! BFEF9000, 00A 5 (r32 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: SLIC BFEF0000, 0176 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: BOOT BFEEF000, 0028 (TOSINV TOSINV00 1 MSFT 1000013 r1) +------+ ACPI: SSDT BFEEE000, 0655 (r1 PmRef CpuPm 3000 20051117 INTL) +------+ ACPI: DMI detected: Toshiba +------+ ACPI: PM - timer IO Port: 0 x 408 +------+ ACPI: address Local APIC 0xfee00000 +------+ ACPI: LAPIC (acpi_id [0 x 01] lapic_id [0x00] activated) +------+ ACPI : LAPIC (acpi_id [0x02] lapic_id [0x01] activated) +------+ ACPI: LAPIC (acpi_id [0x03] lapic_id [0x00] disabled) +------+ ACPI: LAPIC (acpi_id [0x04] lapic_id [0x00] disabled) +------+ ACPI: IOAPIC (id [0x04] address [0xfec00000] gsi_base [0]) +------+ ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) +------+ ACPI : INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 level) +------+ ACPI: IRQ0 used by substitution. +------+ ACPI: IRQ2 used by substitution. +------+ ACPI: IRQ9 is used by substitution. +------+ ACPI: HPET id: 0x8086a201 base: 0xfed00000 +------+ Using ACPI (EMAC) for SMP configuration information +------+ ACPI: Core review 20080609 +------+ ACPI: looking for initramfs Custom DSDT +------+ ACPI: bus type pci registered +------+ ACPI: EC: pick up at CBS in the DSDT +------+ ACPI: _OSI (Linux) ignored by DMI BIOS query +------+ ACPI: active interpreter +------+ ACPI: (supports the S0, S3 S4 S5) +------+ ACPI: IOAPIC using for interrupt routing +------+ ACPI : EC: non-query interrupt received, switch to stop mode +------+ ACPI: EC: Storm detected GPE, transactions will use polling mode +------+ ACPI: EC: GPE = 0x16, I/O: / order = status 0 x 66, data = 0 x 62 +------+ ACPI: EC: pilot started in interrupt mode +------+ ACPI: PCI [PCI0] root bridge (0000:00) +------+ ACPI: PCI Interrupt Routing Table [\_SB_. PCI0._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. P32_._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP1._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP2._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP5._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. PEGP._PRT] +------+ ACPI: PCI interrupt link [INKA] (IRQ 3 4 * 5 7 9 10 11 12) +------+ ACPI: PCI Interrupt Link [LNKB] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI interrupt link [LNKC] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI Interrupt Link [LNKD] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI : PCI Interrupt Link [LNKE] (IRQ 3 4 5 7 9 10 11 12) * 0, disabled. +------+ ACPI: PCI Interrupt Link [LNKF] (IRQ 3 4 5 7 9 * 10 11 12) +------+ ACPI: PCI interrupt link [LNKG] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI interrupt link [LNKH] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: power resource [FN00] (on) +------+ pnp: ACPI PnP init +------+ ACPI: type pnp registered bus +------+ pnp: ACPI PnP: found 8 devices +------+ ACPI : Type of non ACPI pnp bus +------+ PCI: use ACPI to IRQ routing +------+ ACPI: RTC may wake from S4 +------+ ACPI: [fan] (on) +------+ ACPI: SSDT BFD77C18, 026 (r1 PmRef Cpu0Ist 3000 INTL 20051117) B +------+ ACPI: SSDT BFD75598, 0537 (r1 PmRef Cpu0Cst 3001 20051117 INTL) +------+ ACPI: CPU0 (power States: C1 C2 [C1] [C2] C3 [C3]) +------+ processor ACPI0007:00: registered as cooling_device1 +------+ ACPI : processor [CPU0] (supports 8 throttling States) +------+ ACPI: SSDT BFD76E18, 01CF (r1 PmRef ApIst 3000 20051117 INTL) +------+ ACPI: SSDT BFD77F18, D 008 (r1 PmRef ApCst 3000 20051117 INTL) +------+ ACPI: CPU1 (power States: C1 C2 [C1] [C2] C3 [C3]) +------+ processor ACPI0007:01: registered under cooling_device2 +------+ ACPI: processor [CPU1] (supports 8 throttling States) +------+ ACPI : transition device [FAN] to D3 +------+ ACPI: thermal Zone [THRM] (44 c) +------+ ACPI: Power Button (FF) [PWRF] +------+ ACPI: Power Button (CM) [PWRB] +------+ ACPI: lid switch [LID0] +------+ ACPI: battery [BAT0] (battery present) +------+ ACPI: AC adapter / CC [ADP0] (online) +------+ peripheral acpi: 1B: registered under cooling_device3 +------+ ACPI: Video Device [VGA] (multiple heads: Yes Rome: no message: no) +------+ iwlagn 0000:03:00.0 : state changes by ACPI to D0 + power------+ ACPI: WMI: responsible Mapper +------+ iwlagn 0000:03:00.0: state changes by ACPI to D0 + power------+ ACPI: EC: lack of confirmation, cut the interrupt mode. +

• VSM Support VMware vSphere 6.0

  Is it possible to have taken MSM supported with VMware vSphere 6.0?

  Please advice.

  Hello Muhammad,

  By releasing VSM v4.5 soon, which will support vSphere v6.0.  Until then no, the current version v4.0, doesn't support vSphere v6.0.

  Kind regards

  Don

• SSH v2 taken supported under 6.2 IPS?

  When you try to copy the current config on a server using the scp, we received the following error message:

  The major protocol versions differ: 1 vs 2

  Remote Protocol version not supported for the host, w.x.y.z. - must support SSH version 1.

  Is it possible to activate SSH version 2 support of PCs under the IPS?

  SSHv2 is supported of the traffic of IPS (IPS acting as server), but it is not taken in charge when IPS acts as a SSH client.

  Syed Iftekhar Ahmed

• View 6 does not support the 2012 server as a host for the connection to the server operating system

  If I do some preparation work for a view upgrade 6.0 (from 5.3).  After skimming the documentation on the operating system for connecting servers, I notice that Server 2012 is not supported, but Server R2 2012 is.

  I can get it for the installation of "resolution of compatibility issues" for the installer, but rather, I don't throw a facility "not supported" in the production.

  Does anyone know the reasoning/logic behind this?

  Most clients use the R2 versions, it's the fundamental reason.

  The smaller support matrix, faster than we can make good QA on the targeted OS versions and this means that we can release the software more quickly.

  Linjo

• LACP now supported in vsphere 5.1?

  Hi all

  I tried to lacp on my cisco switch 3750 put lacp on vpshere (channel-group xx active mode) 5.1 5.1/esx, it did not work.  I have lacp on my openfiler two nic I can see the policy is it works.  When I tried on my esx5.1 my dvport of switches (I) update status, which is the simple mode, which means that it does not work it's supposed to be (P).  My esx5.1 is currently connected to the later.  My dvport or standard port will still work with the compatible link aggregate which is channel-group active xx on and ip of the hash. My quad nic is Intel 82576 Gigabit.

  comment, you can add is very appreciated.

  Thank you.

  LACP is supported.

  Maybe the blog article below will help you

  http://wahlnetwork.com/2012/10/15/using-LACP-with-a-vSphere-distributed-switch-5-1/

• ESX 3.5 can support a vSphere 4.1 OVF?

  ESX 3.5 can support an OVF file created in vSphere 4.1?

  Thank you

  Chris

  OVF is supposed to be independent of the Virtualizing software so I think that there should be no problem for a host ESX 3.5 import an OVF created with vSphere 4 ot 5 — I say this without having tried it myself

• Support HBA (vSphere 5) and display of the adapters for storage in vSphere client

  Hi again,

  Some hosts that I am looking to upgrade from ESX 4.0 update 4 to ESXi 5 bear the name of FC HBA following listed under storage adapters, and I would like to see if they are compatible with ESXi 5.

  Focus on the ISP2432 4 Gb Fibre Channel to PCI Express HBA

  The actual servers themselves are servers Dell M600 blades. I would say that it's just what is listed in the section of storage cards (my guess is the name of the driver). The configurations of real system for M600 blades as they were purchased from Dell are listed as having HBA QLOGIC QME2472 FC4 HBA's PORT DOUBLE PC CARD adapters in them. These are listed as supported on ESXi 5. So I guess my question is more around - what is reported in the list of storage adapters more indication of the driver name for the HBA rather than the real exact device/model of the HBA? How can I make 100% sure that this is the exact material HBA model in my hosts? i.e. the QME2472? I can use Dell OpenManage but that lists what ESX reports cards like - which is the ISP2432 base of HBA. Is there something more low level, that I can use to see the material in ESX?

  See you soon,.

  Sean

  Yes, the HBA is supported on ESXi5.  You can always check the HCL for clarification

  Brand name	Model	Type of device	Supported releases
  QLogic	Focus on the ISP2432 4 Gb Fibre Channel to PCI Express HBA	FC	ESXi 5.0 ESX / ESXi 4.1 U2 ESX / ESXi 4.1 U1 ESX / ESXi 4.1 ESX 3.5 U5 ESX 3.5 U4 ESX 3.5 U3 ESX 3.5 U2 ESX 3.5 U1 ESX 3.5 ESXi 3.5 integrated U5 ESXi 3.5 integrated U4 ESXi 3.5 integrated U3 ESXi 3.5 integrated U2 ESXi 3.5 integrated U1 ESXi 3.5 integrated ESXi 3.5 Installable U5 ESXi 3.5 Installable U4 ESXi 3.5 Installable U3 ESXi 3.5 Installable U2 ESXi 3.5 Installable U1 ESXi 3.5 Installable ESX 3.0.3 U1 ESX 3.0.3 ESX 3.0.2 U1 ESX 3.0.2 ESX 3.0.1 ESX 3.0