SSM-20 no license

Similar Questions

• ASA-SSM-10 improvement no license or signatures

  I successfully upgraded our ASA-5510 with the latest version of the software.

  Our IPS module however ASA-SSM-10 seems to be the settings to factory default with only an IP address that is configured without any permission or certificates. The ASA-SSM-10 module can be improved with the lack of licenses or certificates? In addition, by using PuTTY I am able to connect to the ASA-SSM-10 module and ping the module and my laptop that I have connected via the management port. I am unable to ping from the laptop to the module of ASA-SSM-10 well.

  Continuing the investigation in addition to the configuration of the management port IP address there is no VLAN, GW, image url or ip address of the configured port. Is there a simple way to upgrade the software on the ASA-SSM-10 without affecting our two ASA - 5510 that are configured for failover?

  I suppose I can do up to a VLAN, GW and port address to get my cell phone to ping to the ASA-SSM-10 module to upgrade without affecting our ASA-5510 that are configured for failover. ***

  You can attach more licenses for the legacy IPS until April 26. But the question is whether it is worth spending time and money in the present. The IPS legacy is dead and you should focus on firepower for IPS. But who does not work on your hardware.

• Cisco ASA 5510 + license + AIP - SSM

  Hello.

  I have this box.

  I have a few questions about it.

  (1) I'll be able to update the firmware (from 8.2 to 8.3 or greater for example) without smarnet for ASA 5510? And what can not do without smartnet?

  (2) I have only AIP-SSM-10 module this ASA 5510. is there a smartnet, too? And when I buy only one module is it build in a subscription for 1 year for the signatures of the IPS?

  (3) if I have the Cisco ASA 5510 base license, my IPS on AIP-SSM-10 will work?

  (4) as I foresee in a purchase of the year a 5510 more with the same module and mount ther of failover. I really need license Security more than failover (active / standby)? For active/active, I know I need one, Yes?

  Please help me.

  (1) you must Smartnet in order to download the software from the download from cisco.com site.

  (2) Yes, there is also a smartnet for the AIP module. Module AIP does not come with one year subscription, but you can ask for a demo license.

  (3) Yes, the basic license is OK for the AIP module.

  (4) Yes, you would need license security more on the two ASA to be able to run any type of failover on ASA5510.

  Hope that answers your questions.

• AIP - SSM 10 Signature Update license?

  Hi every one.we had an AIP - SSM 10 for our asa5520.actually it is bundle asa5520 + AIP-SSM10. (part number ASA5520-AIP10-K9 =)

  (1) I want to know that if we want to improve our signature aip - ssm we get the Services Cisco IPS download signatures or not with this number of pürt we get it too!

  (2) in the case and we must get the Cisco IPS services separately so where can I find a reference number for the services of this?

  (3) what license that must be installed on the sensor activation? If we get the Cisco Services for FPS then we receive license activation for installation on sensor too? or not if not, can we install signatures on a sensor that it has not been activated yet? guess we can get a few signatures how! (I know JOINT-2 we cannot install any license until the license is installed on the sensor.) Thank you

  CON-SU1-AS2A10K9 would be the correct contract to put all the pieces of the boot under the maintenance contract.

  CON-SU1-ASIP10K9, this is what is used when the AIP-SSM-10 are purchased as spare.

  I don't know if yes or no this Service Cisco IPS contract can be used to cover only the AIP-SSM-10 if it was purchased as part of a package instead of a spare part. You will need to ask your reseller or Cisco sales representative.

• -Renewal-license module CSC SSM

  Recently, my existing CSC SSM module license expired & I need to know the necessary steps & product ID to renew expired CSC SSM license module hosted on ASA-SSM-20 device:

  Tip,

  The system was laid off with Base & more license, 500 users.

  Yes, it's at the BASE and MORE.

  Please check the question as answered if that's the case, so that others can benefit from in the future.

  Take care

  PK

• License number of basic CSC SSM

  I am registered CSC SSM 10 with cisco.com licenses. I have received no file.when license I wil try to register for the next time it shows error like this

  Please correct the errors below and to resubmit the request

  We cannot provide a license at this time key. Our records indicate that the product authorization key that was entered during the registration process has yet been used, and a license key has been issued on the following date:

  Issue date: March 7, 2008

  Please help me solve this problem

  You will need a new PAK for registration. Address an alliance with Cisco Tac cases and get the correction key (PAK) and registration.

• Licensing Module AIP SSM issue

  Hello

  If I put 2 AIP SSM Modeules in to a Cisco ASA 2 which are grouped, need me a new license for the firewall?  In the ASDM she complains without a valid license installed even if the firewall collects the cards and allows me to configure in CLI.

  Help please

  Yes, you do.

  AIP SSM module is independent of the SAA. Each AIP SSM module would need their own license as it relates to the AIP SSM module number.

• Update license of IPS ASA - SSM

  Hello

  We have an ASA-SSM-20 IPS, the license has expired and we purchased a Smartnet contract for the device.

  I would like to know how to upgrade the license.

  We tried to do the ASDM, and chose the option updates to cisco.com.we got the following error.

  internal error. Unable to send the license request. -4: unable to proxy transparent tunnel. Proxy returns "HTTP/1.1 403 Forbidden.

  How to solve this problem or how to do when you use the other option, how to get the license file.

  Best regards

  It seems that your AIP-SSM20 is configured to use an http proxy to connect to the Internet. If you allow the IP address of the AIP-SSM20 management in your web proxy, it may solve your problem.

  If this isn't the issue, you can always apply a license manually. Download your license file here:

  https://Tools.Cisco.com/swift/LicensingUI/home

  and apply via the ASDM or the CLI

  -Bob

• Had a bad IPS SSM-20 RMA for the nine now license need to fire?

  Now the license for IP addresses on my account service contract is different than the one installed. the serial numbers are different? How can I get the I went back through RMA and have a license for the new serial number?

  Use your open box of TAC to request the license is transferred. It should have been done automatically when the device has been RMA'ed, but if not just ask your TAC engineer to do.

  -Bob

• AIP - SSM 40-level question.

  Hello

  I am trying to upgrade the AIP - SSM software file 'IPS - K9 - 6.0 - 6 - E4' in 'IPS-engine-E4-req-7.0-2 '. But it is not allow.

  "Could not pass the software on the sensor.

  Level the current signature is S698. The current level of the signature must be less than S480 for this installation package. »

  So I tried to update the signature file less than S480, "IPS-GIS-S460-req-E3".

  "Can not upgrade the sensor software be"
  This update can be installed on the sensor with and the version of the 3 engine.

  The currently installed engine version is 4.

  There is no signature file in cisco downloads less S480 in version 4 engine.

  See the version

  AIP - SSM # sho version

  Application partition:

  Cisco Intrusion Prevention System, Version 6,0000 E4

  Host:

  Domain keys key1.0

  Definition of signature:

  Update of the signature S698.0 2013-02-19

  OS version: 2.4.30 - IDS-smp-bigphys

  Platform: ASA-SSM-40

  Serial number:

  License expires: November 3, 2013 UTC

  Sensor time is 3 days.

  Using 4203216896 bytes of available memory (24% of use) 1045143552

  application data using 41.4 M off 167.8 M bytes of disk space available (26% of use)

  startup is using 37.8 M off 70.5 M bytes of disk space available (57% of use)

  MainApp N-NUBRA_2009_JUL_15_01_10_6_0_5_57 (Ipsbuild) 2009-07 - 15 T 01: 15:08 - 0500 Running

  AnalysisEngine NO-NUBRA_E4_2010_MAR_24_22_44_6_0_6 (Ipsbuild) 2010-03 - 24 T 22: 47:53 - 0500 Running

  CLI N-NUBRA_2009_JUL_15_01_10_6_0_5_57 (Ipsbuild) 2009-07 - 15 T 01: 15:08 - 0500

  Upgrade history:

  * IPS - K9 - 6.0 - 6 - E4 21:14:06 UTC Wednesday, March 24, 2010

  IPS-GIS-S698-req - E4.pkg 15:44:43 UTC Sunday, February 24, 2013

  Version 1.1 - 6, 0000 E4 recovery partition

  ____________________________________________________________________________

  Any help will be much appreciated... Thanks in advance.

  Liénard

  If you try the software version Upgrade, try to use the IPS-K9-7, 0-2 - E4.pkg instead of the engine update package.

• Could not update the Antivirus model Cisco CSC SSM

  I have a Cisco ASA 5520, with Cisco ASA-SSM-CSC-10-K9. ASA version 8.4.3.

  Since two days ago, reason for automatic virus protection update for Cisco CSC SSM failed, error message as below:

  AntiVirusPattern: Model update: the download file failed for ActiveUpdate could not verify security information. The confidence of information database is damaged. Contact Trend Micro technical support... The error code is 62.

  The license is valid and the subscription is expired September 2014.

  Any body encountered a similar problem before?

  Any body has Trend Micro Cisco CSC SSM helpdesk contact?

  I can't find any info Trend Micro for Cisco CSC SSM.

  SCC Module tcaps 1144 is available on server Trend Micro safesync:

  See

  https://supportforums.Cisco.com/docs/doc-40231

• Users for Module CSC - SSM

  Hello world.

  I went through the CSC - SSM product data sheet at http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/ps6823/product_data_sheet0900aecd80402e4f.html.

  In the license product he sai CSC - SSM 20 supports max 1000 users. What does that mean?  This means that I can't use CSC - SSM when the number of users is more than 1000?  If I'm not correct, what is the maximum number of users I can get behind CSC - SSM 20 so that it works efficintly when all features are enabled?

  Thanks in advance

  Deepak Khemani

  Hi Deepak,

  The numbers that you're talking about in the data sheet are a number of IP addresses of the single user inspected by the module. This account is a cumulative over a period of 24 hours. If the license is exceeded, the administrator will be sent an email once per day to inform them of this.

  -Mike

• CSM up-to-date IPS AIP - SSM

  Hi all

  I need help. I'm setting up my 3.1 CSM to apply the update on my IPS AIP - SSM.

  I went to the FPS tab apply and choose Update cisco.com. But it's still as treatment for a long time.

  I tried to enter my username and password for the sensors or account of the BCC but still no improvement. Anyone know how to configure it. I tried to read the user guide there is no examples.

  Thank you

  The two IPS - K9 - 5.1 - 8.pkg abd IPS-SSM_10-K9-sys-1.1-a-5.1-8-E3.img will recreate the image on the partition recovery and the application partition.

  The System Image will erase everything before starting the imaging process.

  The Service Pack Upgrade file will first of all take the current configuration and convert it to work with the new version and save off the coast. Also several other special folders on the sensor (for example, the license file) will be saved off the coast. The imaging process will run and then the saved to the large files will be automatically applied to the probe.

• License and trial IPS signature updates

  Hi all

  We have an AIP - SSM-20, I installed a trial license in the meantime that the contract. I don't know how I can get the signature files but I can't download it from the site and auto-update fails with permission.

  Is is possible to get these with a trial license?

  Thank you!

  Jacques

  The trial license itself affects only if the sensor will allow you to install files.

  The trial license not has no effect on whether or not your cisco.com username will be able to access the files.

  You have a representative Cisco you work with? If yes then contact him/her. They should be able to get approval for your username, or download the files themselves and provide them.

  If they download them for you, you will not be able to test the function "auto-update", but at least will be able to install them manually.

• installation of update of signature for JOINT-2 AIP - SSM

  Hi every one, im not sure about this issue but I think its beter ask you experts.i want to know that if I update the signature for example for my JOINT-2 can I install this update of GIS on my AIP - SSM--> assume that software IPS on both devices are same and I also installed the license key valid on AIP - SSM.now can I do this or not? and I know that if you do not license installed on JOINT-2 you cannot install any point of GIS on JOINT-2 but this topic AIP - SSM? I want to say I can install updated GIS on AIP - SSM without installed the license key valid on AIP - SSM? Thank you

  There are 3 main types of Signature updates.

  (1) IPS sensor Signature Update

  (2) updates of Signature CSM for IPS sensors

  (3) signing IOS IPS updates

  The IPS Signature Update file name is in the form: IPS-GIS-Sxxx-req - Ey.pkg

  That's probably what you are referrnig to in your message. This file can be installed on ANY device IDS/IPS or Module.

  Here, the requirement is not the platform but rather the level of the engine. The part "req - Ey" in the file name indicates that the sensor has already run the 'y' the software engine level.

  If a file IPS-GIS-S436-req - E3.pkg can be installed on any IDS/IPS device or Module as long as the software on this sensor is a version of the 'E3 '.

  The CSM updates are updates of signature for the Cisco Security Manager. They contain special files that SCM uses to update, and then also included in the JLC update is the update of real sensor described above. CSM unpackages the CSM update, updates and then uses this file embedded to upgrade the actual sensor.

  The third type of file is for routers IOS loaded with the special IOS software that has the distinction of IOS IPS where the router itself (instead of a separate module of the IDS/IPS) keeps track of the signature.

  These updates to the signing IOS IPS settle on the real router and are not installed on the Modules or the sensor IDS/IPS devices.

  So to answer your question, yes the same Signature Update for your JOINT-2 is the exact same Signature Update for your SSM modules.

  The same exact file is available through several different paths on cisco.com. But no matter which way cisco.com you have downloaded the file, you can always install it on all the Modules and the IDS/IPS Appliances.

  With respect to licensing, the license works the same on all Modules and the IDS/IPS Appliances. A license must be on the sensor for the Signature Update to apply.

  NOTE: A trial license is available at cisco.com for new sensors to allow you to get everything set up properly for your sensor to be covered by a service contract and get the standard license for the service contract.