SSO with BES and 3 rd-party applications

Similar Questions

• Problem with WLC and a 3rd-party NMS SNMP AP Assoc/cancellation interruption

  Hello

  I'm troubleshooting an issue, why our NMS is not able to automatically clear an alarm generated trap of an AP that has been separated and is associated with again.

  When debugging on the WLC snmp trap generation, I discovered that when the AP disassociates the WLC sends the trap of bsnAPDisassociated , which is perfectly defined and I can also find in the SNMP Object Navigator. However when the AP reassociates again the WLC sends the ciscoLwappApAssociatedtrap.

  Part 3 NMS is not able to understand it, but our WCS system does, that's why I then took a peek in the MIB file installed.

  I discovered that ciscoLwappApAssociated is a sheet of ciscoLwappApMIBNotifs (1.3.6.1.4.1.9.9.513.0. 4), which I have neither

  Cannot be found in the Cisco SNMP Object Navigator or the downloadable MIB.

  As the MIB in the WCS is a XML file I didn't how to get information in the 3rd-party NMS.

  Anyone have any idea on how to solve this problem or there at - it update CISCO-LWAPP-AP-MIB available somewhere?

  Our WLCs are running the latest version of the software (7.0.116.0) as well as our WCS (7.0.172.0)

  Thanks in advance!

  Kind regards

  Patrick

  Such discrepancies sometimes occur. Best is a matter of TAC in order to tackle the problem through a bug or have a new MIB published on cisco.com if necessary

• HPWA_Main.exe people with disabilities and HP Support Assistant Application stop working

  First of all Hello! I have some problem in my HP G62 - a32EE Notebook PC windows 7 homebased. First of all my HPWA_Main.exe has been disabled. Even if my bluetooth and WLAN is disabled. I tried to unplug the adapter and I also uninstall my wireless HP support, but still I can activate it. I tried to click on the F12 key, but even my f12 key didn't work. My system BIOS has been updated already last January 13, 2012.

  Second, my HP support Assistant application stops working 5 days ago. I received a notification on my hp support assistant that needs to install the update. So, I installed it but I can't install itself because of serious problem. So, I was advised to close the application, and I did. Yet, I can not use my hp support assistance so far.

  Any help will be much appreciated.

  What was the status message for the card wireless in Device Manager?

  My previous post should be the steps listed.

• Could not access the internet via third party application

  Hi Forum members,

  I develop a thrid party application, which makes http calls to retrieve the data.

  Perfectly on Simulator to work.

  I'm testing this app on BB 9000 "BOLD", he is not able to do an HTTP call.

  Code:

  http = (HttpConnection) Connector.open (URL);

  invalid url parameter of returns.

  Kindly let me know what changes I need to do on my "BOLD", I am a newbie and don't know much about it.

  I'm not able to go forward because of this error.

  Thank you and best regards.

  (1) "I had a Word with vodafone CC, they told me that we must have the BES server in our company, only then my device can become."

  a BES device, so I guess I won't be able to test MDS in the Network Diagnostics tool, am I rite? »

  You are right.

  (2) "even if we need to test the WAP option in the same tool, we need to provide information such as:

  Gateway APN, gateway ip, gatewa userame, pass, source ip and source port. »

  There are (at least) two versions of WAP.  your comments are correct for the WAP 1.  For WAP 2, if you have directories of Service on the phone, it will automatically connect.  It wouldn't surprise me if you do not have WAP 2.  However, you can read the requirements for WAP 1 and WAP 2 here:

  What - in different ways to establish an HTTP connection or socket
  Article number: DB-00396
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

  (3) "contains the information required to connect to a provider wireless WAP 1.x gateway.

  Legacy AT & T wireless only subscribers: Contains the information required to connect to the carrier's WAP gateway.

  does that mean vodafone will not support the WAP1.x and any third-party application cannot test this option as well. »

  No - it means settings that you find on this site are specific for att devices.  You will have to find the equivalent information for the Vodafone India.

• BlackBerry 8520 Smartphone sync problem with BES 5.0.2

  Hello

  I have a BB 8520 with FW 5.0.0.681 synchronization with a BES server. Since I pluged into the computer to synchronize the contacts manually and not through the wireless, wireless sync account e-mail no longer sync.

  I tried to delete and cancelled the Service Office Service book but nothings changes. BTW, I only have two more accounts set up through the page Web of BES and they synchronize correctly.

  Any ideas?

  Sincerely,

  David

  Hi again,

  I realized what was wrong for synchronization after wyping... I used the BB with BES and BIS and BIS keeps configuration even if BB wiped which is logical because it is not portable by the BB...

  That's why I manages to get emails in the office mailbox... I feel better now that it is resolved

  ++

• OBIEE SSO with permission

  Hi gurus,
  
  
  (1) I have configured instance SSO with windows Active Directory and OBIEE.
  
  (2) I also have another instance (without configured SSO) with table external authentication (verification of name and password of the user) and authorization (groups, that populate the session for the filtering of data variables).
  
  Now my question is, I want a combination of scenario 1 and scenario 2. I want OBIEE SSO with Active directory
  
  and the groups in the external table.
  
  The reason being, my groups are custom in the outer table groups, I do not want to keep users in the repository.
  
  can you please give me some pointers if the scenario is possible. Thanks in advance
  
  Thanks and greetings
  Satya

  Now my question is, I want a combination of scenario 1 and scenario 2. I want OBIEE SSO with Active directory and the groups in the external table.

  I don't have what is your question? Just do SSO with AD, and then load the groups in the GROUP through SQL init block. What is your real problem?

  To filter the report data, you must have the same structure of Group at Web cat I guess (correct me if I'm wrong).

  Yes, even if you do not need to use the same workgroup name. Is MNI names I'd rather have completely separate groups, some for safety to the RPD for Web security catalog. As long as the groups exist in the appropriate location (RPD or Web catalog) and they are assigned in the block GROUP init then OBIEE will be happy, they do not need to exist in both places.

  (2) No SSO will fill the Remote_User variable rather than the default USER variable.

  No, you say OBIEE where to put the REMOTE_USER value. "You can simply select ': USER"FROM DUAL or if you have your users defined in a table, you can also authenticate the user exist in this table, SELECT": 'FROM USER_TABLE WHERE USER_ID =' USER: USER" which adds another layer of authentication to your SSO solution.

• behavior of application with BES flavours IE for Exchange, Domino and GroupWise.

  Hello

  I have a java application to networking than woks with BES for Exchange. Can I assume that the same application works also with other i.e two flavors Domino and GroupWise.

  my application uses MDS and makes use of the BES network.

  Please clarify for me.

  Thank you

  Sri.

  The Mobile Data System (MDS) component of BlackBerry Enterprise Server offers the same features for Exchange, Domino and GroupWise flavors.  An application using the SDM as transport should work the same, regardless of the messaging platform.

• with third party applications, I can read and write on the external drive HFS + for windows?

  Hello

  I see with third party app I can read and write to external disk NTFS on the mac computer.

  then othrwise, then I can read and write on extern hardrive HFS + with application of third party windows computer.  So who are the best third-party applications to read and write HFS and if they are free of charge on the external drive?

  Thank you

  Johan

  Now that I understand your goal, check out http://www.ufsexplorer.com/rdr_hfsp.php but your YMMV.

• Apple Watch series 2: third-party Applications have control of gps, and exactly what kind of information you get when and after running?

  Third-party applications have control of gps, and exactly what kind of information you get when and after running?

  What I mean is can party like Strava apps or MapMyRun turn on and use the GPS for the courses?

  Also, the default running app, what kind of information you get? During the race, exactly what then I tell me? In addition, exactly what information can I see after I run? I would like to know whether or not she has the cadence.

  Last question: is it easy to verify my info running? Speed and natural lights?

  Thank you!

  Hello

  Information about the integrated training application - including data you can choose to display during training, and where the information is available to see later - are available here:

  • Work with your Apple Watch - Apple Support

  Cadence is not measured by the app to training.

  More information:

  http://www.Apple.com/Apple-Watch-series-2/

• Three questions.  The heart rate monitor now plays nice with the third-party applications?  Can you run these third-party applications, without the link to your phone?  How much storage?

  My experience with the original watch is that the heartbeat was working fine with apps in the House but does not work well with third-party applications.  Aboriginal health applications were sub par at best.  In addition, he wouldn't these third party apps (Strava), unless you were related to your phone.  A new doesn't do me much good if it is always the case.  Finally, it's great that you can bind your helmet now but what storage is the watch have?  I am not unrealistic, its understandable if its not much, but I hope that it is enough that a few apps and music enough to pass through a 4 hour tour.

  1 WatchOS3 made major changes in this area, and 3rd party applications get access to things like HR. OS3 also makes everything much more receptive. 3rd party applications will need to be updated to play with the HR monitor.

  2. you can run applications 3rd party without the phone with you, but for your type of application, you'll want a series 2 with GPS watch. The likes of Runkeeper OK working in the older shows, but without GPS, they do not really work you need. New - 3rd third party apps will need updates to work with the GPS watch. OS3 software has been available to developers for a while now, so I expect software updates only very quickly. I don't know if or when 3rd parties had access to the equipment and GPS devices, s, then it may be some while before they have series 2 updates.

  3. you can store 2 GB of music. How much music that is depends of course format and quality, but certainly several hours.

  Hope that helps

• Registration of a client device in a java application with BES/MDS

  Hi all

  I put this thread here that my application is a java application, but it could have also listed under the section development push as well.

  I have a part of my application that needs to connect to the BES to a certain company to receive push messages. The app works fine establishment of a listener and receiving thrusts by the MDS Simulator, and I also added more code to register the device with the BIS (BPA) from BIS example of Simon Hain.

  Initially I thought that the he had to register with the BES, just like how register us with the BIS except change some settings, as do not add an app ID etc. I have created a basic application of the Z10 push and remember that coding is the same for the BIS and BES except that the application ID and address BIS have been left blank. But now, after some research, I think with Blackberry 6/7, to onboard with a BES connection (unless a middleware program requires us to send some data onboarding) to receive a Push message, we just open a connector to the port number using the deviceside = false setting and wait for help to arrive.

  I looked on the net and forums to directly answer this question but can't seem to find one, that's why I'm asking here confirm.

  Quite simply, taking example of Simon for base, if I plug a client device to a BES (where the server application didn't need any onboarding of the device, its function is to, just send a message to the JSON style to the MDS with the device PIN to the device) would need to register the client with BES/MDS device, as Simon does with its function of registerWithBpas() to register with BIS/BPA , or could I just go directly to opening a connection to a port with the parameter; deviceside = attached false and wait for a Push message to arrive.

  Of course the devic has already been saved in the BES with its ID, e-mail address of the person using this device, etc.

  Simon if you get a chance to personally respond to it, that would be great!

  Thank you all for your time and your help.

  Rob

  Do not enter the unit, simply push the spindle for the MDS and push message will appear on the device.  As you rightly point out, the device is already on the BES and must use the MDS to access the internet in any case.

• What is the best third-party application to create flash standalone applications with?

  Hi all

  Can someone tell me what is the best third-party application to use Flash to create stand-alone applications.

  So far, I looked at the Zinc and SWFStudio. I realize that it is AIR too but I think that this application will only extend Flash to a degree.

  What I need is to get as much control of the MAC/PC/Mobile device as possible. Also, I need to be able to communicate with other applications exe/app on the local computer or through networks.

  I think it would be better to list what I need to do:

  1. listen to actions in other applications exe/app on the same system / network

  2. "sniff" directory and then list the contents

  3. check the other exe/app on the same system / network

  4 backup/update XML files on the same system / network

  5 register and retireve of data from a database on the same system / network

  6. read video files FLV, MPEG and many other possible formats

  7 be able to build for MAC/PC/Tablet? Mobile devices

  I think it's a good list to start with.

  Any help would be much appreciated here.

  Thanks in advance

  DAZ

  Adobe AIR has native extensions (ANE) just for that. For any feature the AIR framework has no you can write plugins that extend the capabilities of AIR. Here is a list of extensions for example, some are windows (Mobile only):

  http://www.Adobe.com/devnet/air/native-extensions-for-air.html

  Here is an example of a DONKEY Windows written in Microsoft Visual Studio 2010 C++ to tap into the .NET image processing:

  http://blog.magicalhobo.com/2011/09/12/air-3-native-extension-ImageProcessor/

  Incidentally I've used mProjector and Zinc and in between, they also support their own plugins for extended functionality.

  Although I greatly prefer Zinc. I used it in several projects and the library of extended features, it comes with is pretty extensive, documentation and help. They update a little more.

• How bridge communicates with third-party applications?

  Hello

  Is it possible to communicate between Adobe Bridge and a third party request help SDK bridge?

  I want to learn how bridge can communicate with another application? SDK bridge have samples that explain how the bridge communicates with other applications such as Photoshop and Indesign Adobe. Can someone guide me or give me a sample where bridge communicates with a third-party application?

  Thank you.

  There is no direct access to the deck from a non Adobe application.

  If you need to access bridge, it must be done via another application such as Photoshop Adobe. THAT IS TO SAY: -.

  C# - Photoshop - bridge

  You must use BridgeTalk to send and receive messages between Photoshop and Bridge.

• Why finder hide Documents and office files in the home directory of the user by activating iCloud drive? What about the behavior of Time Machine backup or third-party applications?

  I'm under MacOS Sierra. I am connected to my iCloud account. I activated the option Desktop and Documents, but I did NOT activate the option optimize Mac storage, because I wanted to make sure that all my files would be available locally, just in case, I would need to work without an internet connection.

  -J' noticed there now a menu iCloud in my sidebar in the Finder, with links to Documents and desktop.

  -J' also noticed that Documents is no longer presented in my favorites in my side bar of the Finder.

  -This last suggests that files saved in 'Documents' are not saved more on my HD... but only in iCloud, which isn't what I want.

  -Then, sailing in the Finder Macintosh HD/users / 'My account' /, I noticed that my Documents and desktop folders are more visible, as if these files are not saved in my home folder most. Which raises the question: where are My Documents and files on my HD, so they are still?

  -Using a shell session in the terminal and again navigate to/Users / 'My account' /, I noticed that my Documents and desktop folders are still there. Which suggest that records and records of office reside actually still in my home folder under users, but Finder actually hide it and present them as being stored in iCloud only disc. It's very confusing.

  This raises several questions:

  -In the first place, why Apple hide Documents and office files in the directory? Why not view these folders in iCloud and directory?

  -Whence the iCloud folder or drive, reside actually on my hard drive?

  -What time Machine. Is it still back up my document files and folders?

  -What games third-party app mirroring backup of My Documents files and folders? They still work properly? (I use Livedrive backup and Sugarsync for files mirrored across several macs).

  -How can I understand that Apple is doing with my folders and files? Some users might be happy with the iCloud drive concept, without worrying about how it works, but I don't take chances, and I want to keep a good understanding about the functioning of my system.

  Could someone explain what is exactly happening?

  With office and selected Documents, access to these files are now in the iCloud Drive, not in your home folder.

  My guess would be that they do not appear in your file because it would be confusing for many people to make them in two places.

  If you want in the Favorites, open iCloud Drive and drag them in the sidebar here.

  All about iCloud drive has been saved on your Mac. With the exception of the office and the Documents, they are in ~/Library/Mobile Documents. However, if you choose optimized storage, older documents are removed from your Mac. I don't know what is "old".

  ~/Documents and ~/desktop have new metadata indicating probably Finder does not display them in a Finder window, only in iCloud drive. They are not hidden in one of the normal methods of unix.

  I have not tested Time Machine or any other backup program. The folder still exist in your directory home, and they still have all the files, I don't think that changes anything.

• Open with options: I want to add a new application to the list right click on file-> open with and rearrange the list so my search app is first. I know that I can use open with-> other and select any application, but it takes too much time since I u

  I want to add a new application to the list right click on file-> open with

  and also reorder the list so my search app is first / top of the list.

  I know that I can use open with-> other and select any application, but it takes too long I should use my intended application in this way several times a day.

  Basically, I'm looking for a configurable way configure open with, something more to send to Windows.

  Thank you very much for all the advice offered.

  The operating system, not you, not control that open with the menu command.