Standard network naming

Similar Questions

• Migrate standard network switch to VDS

  Hello

  I intend to migrate little my clusters that are running in a standard switch to DVS. Need help to automate this process.

  My scenario is:

  In a 15cluster environment are present 5 are already running in DVS
  but 10 clusters are still a standard switch so I need to migrate the
  already existing DVSwitch.

  By taking a cluster of 10node as an example.
  (1) mgmt and vmkernel are on a vswitch (ex: vswitch 0)
  [vswitch 0 - connected with 2 vmincs]

  (2) virtual machine in a vswitch portgroup (Ex: vswitch 1)
  [vswitch 1 - connected with 2 vmincs]

  On all groups, we need to migrate only machine virtual portgroup
  or vmnetwork (ex: vswitch 1) to off-network vmkernel mgmt DVs.
  My plan:
  First add all cluster hosts to DVswitch
  Remove all a redundant vmnic (ex: vmnic3) connected to the machine virtual portgroup. (Ex: vswitch) 1 and adds it to DVswitch.
  Now migrate all virtual machines connected to a standard switch to dvs. (Here I hit)
  Is it possible if VLAN 10 (standard switch) then consists of 5 virtual machines
  check the VLAN 10 DVS and portgroup network set to 10 VLAN adapter on the
  SMV (I mean can we compare VLAN ID on VSS and VDS and inspiring than us)
  need to migrate virtual machines to a DVS.)

  As below:

  

  
  If it works correctly then you have to check the State of all virtual machines (ignore power VM off) ping
  If ok then proceed to map the second network card (ex: vmnic4) VSS for VDS.

  Use the Script:

  # ESXi hosts to migrate from VSS to VDS
  $vmhost_array = @("host1","host2")
  # Adding Hosts to existing VDswitch
  $vds = Get-VDSwitch -Name "SM_UAT"
  foreach ($vmhost in $vmhost_array) {
  # Add ESXi host to VDS
  Write-Host "Adding" $vmhost "to" $vds_name
  $vds | Add-VDSwitchVMHost -VMHost $vmhost | Out-Null
  # Migrate pNICs to VDS
  Write-Host "Adding vmnic2 to" $vds
  $vmhostNetworkAdapter = Get-VMHost $vmhost |Get-VirtualSwitch -Name "vswitch1" |select -ExpandProperty Nic |select -First 1
  $vds | Add-VDSwitchPhysicalNetworkAdapter -VMHostNetworkAdapter $vmhostNetworkAdapter -Confirm:$false
  # Migrate VMs from VSS to VDS
  Write-Host "migrating vms from VSS to VDS"
  }
  
  
  
  
  
  
  
  
  
  
  

  
  

  Maybe try like this

  # ESXi hosts to migrate VSS to VDS

  $vmhost_array = get-VMHost-name 10.50.37.31

  # get existing VDswitch

  $vds = get-VDSwitch-name "Pre-production".

  foreach ($vmhost to $vmhost_array)

  {

  # Add ESXi hosts service VDS

  Write-Host-object 'Add' $vmhost 'to' $vds

  $null = $vds |

  Add-VDSwitchVMHost - VMHost $vmhost

  # Natachasery to VDS migration

  Write-Host-object «first extraction vnic connected to vswitch»

  $vmhostNetworkAdapter = get-VMHost $vmhost |

  Get-VirtualSwitch-name "vswitch1 |

  Select-Object - ExpandProperty Nic |

  Select-Object - 1 first

  Write-Host-object "Removing vswitch vnic.

  $vmhost |

  Get-VMHostNetworkAdapter-name $vmhostNetworkAdapter |

  Delete-VirtualSwitchPhysicalNetworkAdapter-confirm: $false

  Write-Host-Object "RΘcupΦre removed vnic in a variable.

  $Phnic = $vmst | Get-VMHostNetworkAdapter-physics - name $vmhostNetworkAdapter

  Write-Host-object "adding vmnic (redundant) to ' $vds

  Add-VDSwitchPhysicalNetworkAdapter - DistributedSwitch $vds - VMHostPhysicalNic $Phnic - confirm: $false

  # Migrate virtual machines from VSS for VDS

  Write-Host-Object «RΘcupΦre virtualPortgroup vswitch info»

  $vssPG1 = $vmhost | Get-VirtualPortGroup - VirtualSwitch "vswitch1.

  Write-Host-object "migration of VSS for VDS vms."

  foreach ($vssPG to $vssPG1)

  {

  $dvsPG = $vds |

  Get-VDPortgroup |

  Where-Object - FilterScript {}

  $_. ExtensionData.Config.DefaultPortConfig.Vlan.VlanId - eq $vssPG.VlanId

  }

  $vmhost |

  Get - VM |

  Get-NetworkAdapter |

  Where-Object - FilterScript {}

  $_.NetworkName - eq $vssPG.Name

  } | Together-NetworkAdapter NetworkName - $dvsPG.Name - confirm: $false

  }

• Unable to connect on the internet on another computer - "Windows could not find a certificate to connect to the network (named).

  When I try to connect to internet on my other computer I get a message saying "Windows could not find a certificate to connect to the network (name)". It's only since I've had a second computer as it does on my old computer which is

  a laptop HP Pressario with Windows XP Home Edition. Someone told me to go to authentication in wireless networks, but can highlight something here as everything is gray.

  Hello

  · What type of encryption do you use on the router?

  · You have the latest drivers for your wireless network card?

  Make sure the authentication IEEE 802. 1 x wireless card is disabled, and check if that helps.

  a. Click Start, then select run.

  b. term ncpa.cpl type dialog box and then click OK.

  c. right click on wireless network connection icon and select Properties.

  d. click the wireless network tab.

  e. click on the properties button next to remove it.

  f. click on the Authentication tab, and then clear the authentication 802. 1 x IEEE select this network check box.

  g. click OK to update the settings.

• suddenly more elements network named WCIVANT04 now gone

  Never had this in the column before network.  Clicking on it opens a box that included "scan with Norton" (Norton failed to find all the files inside) and "connect to remote computer."  Anyway another box opens with a subject top left appearing as "Windows security" and required my user name and password to open the WCIVANT04 folder.  I did not either.  What is c?

  I keep the libraries where the unusual item was featured in the network segment and reopened and the unusual element, to which I refer was gone.  He has since reappeared then disappeared once more

  I answered my own question below... except that I have not added a file and print sharing resources... at least not that I know well, except if performed by mistake.

  

• Bug in the application of models Standard of naming in 4.0.1.836

  Whenever I want to apply naming rules to a table, the surrogate key column check box is always checked. Even after I uncheck, the template is applied. In my current design, these columns are already named as I want them to be, but I need to apply a model revised to FK columns and constraints not NULL. No matter what I do the PK column is changed then I have to change it back manually.

  Hello Kent,

  Please report to us that. I logged a bug.

  Philippe

• Standard networking

  Hello

  I just question.

  We have a server ESXi 5.1 configuration that connects to a network of 172.69.12.xxx.

  Now, I tried in a test inside this ESXi host environment.

  I have 4 hosts (nested) ESXi, 1 AD-DNS-DHCP server, 1 vCenter server and 1 Server SSO/inventory, which are all in a network of 192.168.20.xxx (my AD network)

  I can ping the machines and can join the domain.

  Note: vmnic IP is located in the 172.69.12.xxx when checked in the poperties of network adapters

  Now I tried the 4 hosts to add in my vCenter created and attempted to create the virtual machine (with success)

  My problem is the virtual machines are able to get an IP (192.168.20.xxx) the DHCP server, but I can't be able to ping the server AD (vice versa). I can only ping the hosts.

  It seems that my hosts ESXi that prevents them from communicating.

  In order for VM nested to receive traffic, you may need to define 'Promiscuous Mode' to 'Accept' the Group of host port to which you have attached the virtual ESXi hosts.

  André

• Standard network config switch

  I'm just up an environment VSphere 5 and running for the first time.  It is the way I have the network currently installation.  I was wondering if I should split the network management and VMotion on in separate vSwitches.  Management and VMotion are configured to each use one of the physical NETWORK adapter while the VM network is sharing the other two physical NIC resources I use to implement illustrates the configuration of the network both directions, but does not specify which is the best option.  Thanks in advance for any help!

  

  I think it's important that you choose a different range of IP subnet for the other than the management network vMotion. Your configuration now I believe that you will not use the vMotion VMkernel at all, only the other interface management and vMotion.

• Application of model names naming standards does not (consistantly)

  I'm trying to understand the logical steps the application of naming standards to the columns in the paintings.  I say this because sometimes it does; but most of the time it isn't.  I noticed this strange behavior last night as he tried to apply my criteria for assignment of personal names but, for the life of me, couldn't understand the logical steps to do.

  I have my own standards of naming template as shown here, which are the ones I want to apply:

  

  Now, for example, I create a new table called customary ADDRESS with the columns and data types.  For the primary key, I ADDRESS_ID , and in order to exercise, I put in the CITY, STATE and zip_code "Mandatory" (or NOT NULL).

  When you go down (or double-click) on ADDRESS_ID or zip_code to display the properties for these columns, you will notice that the 'constraint name', 'Not Null Constraint name' are all empty - as it should.

  

  When I returned to the table properties dialog box and click naming rules, another dialog box appears allowing me to select which specific naming rule, I would like to apply.  I keep all selected one, click OK.  However, when I now explore the ADDRESS_ID, CITY, STATE or ZIP CODE, there is no constraint names based on my model - at least not immediately apply (for some reason any).

  As a work around for me, if I pointed out, say, zip_code, click on the naming rules , and then click OK, then click apply and again double-click zip_code, constraint name would eventually appear.  However, it is never uniform.

  

  The zip_code with the not Null constraint name column has finally appeared.

  

  We should also not the standard naming PK never applied at all.

  Why it does not work - is this a bug?

  What I am doing wrong?

  Is there another way to do this?

  Hello

  Thanks for the report detailed the constraint not null not defined by the standard naming Wizard. I logged a bug.

  Philippe

• DataModeler v3.3.0: - model naming for substitution key creative standards

  I use DM 3.3.0.734 and in the logic model, we can now set in the properties of the entity to "create a surrogate key.
  When we engineer to the relational model, for each entity are automatically created a new column with the name model _ID {entity} in NUMERIC form (without precision) and are defined as the primary key.
  
  My questions are:
  Is possible to set a different naming standard for the creation of surrogate key?. We define id_ {link}
  Is possible to set the precision of the DIGITAL surrogate key?
  
  If we define the entity as a primary UID column, these columns are included in a unique constraint, but use for PK naming standards.
  As a result, are the following:
  Unique constraint name: entity_PK
  Name of the primary key (surrogate mother): entity_PKv1
  There is no way to set standards for naming such as "{entity} _UID" for unique or even, constraints "{entity} _SK ' for the name of the surrogate primary key?
  
  Can anyone help with some of these topics?
  Kind regards
  Ariel.

  Hello Ariel,.

  Standard model of naming for creating surrogate keys

  I logged enhancement for this request.
  How to change the names of these bad (will change one by one is not an option):
  (1) if the keys unique "transformed" are the only ones you have in the relational model, then simply can apply naming standards
  (2) you can write the transformation script to do it for you
  (3) you can use the new feature - search, export to excel file, change the names here (using find/replace will be faster) and return the changed data back to the relational model
  Here is the description for this:
  https://Apex.Oracle.com/pls/Apex/f?p=44785:24:13179871410726:no:24:P24_CONTENT_ID, P24_PREV_PAGE:6621, 16
  http://www.thatjeffsmith.com/archive/2012/11/SQL-Developer-Data-Modeler-v3-3-early-adopter-search/
  http://www.thatjeffsmith.com/archive/2012/11/SQL-Developer-Data-Modeler-v3-3-early-adopter-collaborative-design-via-Excel/

  You must find _PK, then filter result on Index and you can export the result using the report feature (in XLS or XLSX format). You can create the template and include only the table and the (index) name as properties to include in the report.

  Kind regards
  Philippe

• Standard naming for the creation of an interface

  Hello
  This question be stupid, but I want to know
  
  Are there any standards for naming to create any interface
  
  as in the staging, I set WC_Dim_DS (warehousecustom dimension table_name staging)
  
  How normally an ODI project... naming conventions?
  
  For interfaces/packages
  
  
  Any suggestions?
  
  
  Thank you
  saichand.v

  Hi Andre,

  Yes there are follow-up/recommended by Oracle naming conventions.

  For the sound Interface recommended

  For more readability, you can include the name of the target on behalf of your interfaces table:
  Int

  Example:

  Add int. EDW_SALES
  Int PRODUCT update.

  Thank you
  Guru

• ASA 5520-Duplicate Object - network with the same ip address

  Hello friends,

  We have 5 people work as a team, some in collaboration with CLI and Assistant Deputy Ministers.

  now, we have seen with the same IP address other network objects are created,.

  now some time its difficult to solve or monitoring

  can someone help me to find a solution so that nobody can create any object with the same IP address.

  You could do with a technical solution like EEM where you analyze syslog to see if someone sets up an object with an IP address and then act on it. But WWM has 9.2 which is not available for the 5520.

  If you can solve the problem with an organizational solution. Apply a standard for naming, how objects should be appointed, ensuring that everyone watches he objects before creating new and more important, you must talk to each other which will configure that.

• Network mapping network Vsphere VCD

  Hello

  So I'm new to VCD and try to understand best practices on how to map vcd networks return to networks vsphere.

  I'll start with the external network.

  In my vsphere network I already have a distributed with several groups of ports of production.  This distributed switch is supported by 2 natachasery starting from each host.  The natachasery connect to the ports of shared resources pswitch that allows traffic on all VLANs.

  To set up my network external vcd.  Should I start with a new Distributed Switch groups port dedicated for the vcd?  If so, I guess I would need to devote natachasery to this new dvs?  I guess this new 'external network' should have no access to my production network?

  So what I think.

  1. new DS with a Teddy connected to my cisco switch.

  2. place a single vlan on that port to pswitch coming out just through my firewall to the internet.

  3. create the Group of ports on this new distributed switch

  3. create my vcd external network to use this port group who has access only to the vlan that comes out to the internet.  No connectivity to my network of vsphere production?

  Again, I am new to vcd so feel free to offer a completely different solution.  I'm tryin to figure out how the vsphere networking should be setup to support these networks of vcd.

  
  Thanks in advance,
  Ian

  Let me start by asking what is the purpose of this cloud.  Is it to run systems for yourself, or others (such as other companies).

  This is a quick setup which I think will be works for many people, or at least as a starting place to get an idea how it goes toghether. I used it as a whole little clouds which was a private cloud, so it has worked well for the needs could help by giving you a start.

  In VCenter

  Unique DVS

  4 cards network uplink on DVS

  dvPortGroup to name VMKernel/VMotion "VMotion" VLAN 11

  dvPortGroup to Managment named 'Management' VLAN 10

  dvPortGroup to Internet only traffice name "InternetDirect" VLAN 12

  dvPortGroup to the name of "VMNetwork" VLAN 13 Normal network traffic

  VLAN 14 also install switch as private use to VCNI traffice between fenced of vApp

  In VCLoud

  2 x network provider in VCD Setup

  'Internet only' - pointed the DVS dvPortGroup named 'InternetDirect '.

  'Normal network' - pointed the dvPortGroup named 'VMNetwork '.

  1 x network pool

  'Standard network Pool' - configured to use VNCI on VLAN 14

  For each org (we had some, but they are all very easy company)

  added 2 networks for each and pointed provider networks

  Unless I forget something that that's all we had to do to have a "normal" and the only network Internet and allow VAPP is fenced and have private network segments. -A bit of VLAN, we used could have been consolidated, but we liked the idea of knowing esxi-esxi traffic has been segmented wit ha vlan other speculation.

• AirPort Extreme: extend only 5 GHz network

  I have a Time Capsule 802.11n (4th generation) set up to expand my WiFi network at our show in the stairs.

  The WiFi hotspot, upstairs in my office, is an Airport Extreme 802.11n (5th generation).

  Attached to my TV Sony is a transmitter Brightech DoublePlay HD Bluetooth 4.0, running on the band 2.4 GHz effects seriously communications on my WiFi network (demonstrated unequivocally by the device to the USB port on the TV).

  If I can force time Capsule 802.11n (4th generation) in my living room to expand the WiFi network exclusively on the 5 GHz band.

  I named the Base Station Airport Extreme 802.11n 5 GHz network (5th generation) and have set up time Capsule 802.11n (4th generation) in my living room to expand the 5 GHZ network named (not WiFi Dual Band network) but me uncertain whether time Capsule 802.11n (4th generation) in my living room is locked on the band of 5 GHz. is there a way to check this.

  Appreciate your help, any...

  WiFi performance was dreadful while listening to the sound of movie via Bluetooth head sets, take several hours to be ready to play a movie in iTunes or play will stall and plans several hours to be ready to resume.  If I can lock the time Capsule 802.11n (4th generation) in my living room on the network of WiFi 5 GHz, I think I'll have the trouble of sorting.

  

  

  If I can force time Capsule 802.11n (4th generation) in my living room to expand the WiFi network exclusively on the 5 GHz band.

  Sorry, but no. When you extend an Apple base station, two radio stations are extended.

• New router ' Fritz! Box "7490, reconfiguration of network"

  I just upgraded my router, Fritz! Box 7490, & I need to re-set my network help please.

  Before the upgrade, I had a very old router Aolynk. This was connected to my TC, the last giving us WiFi for our House, but also my parents House, via an Ethernet cable connecting the TC at the airport Exremem BS. Beside that, I use the TC to occasionally save the iMac & the RMBR & the old router sent our CCTV to phones via an Ethernet cable. The new router is now the primary device & our hub WiFi (Wireless AC active). I read an article that I thought would help, but I had no success.

  I need assistance with the above, and some tips on how to host 6 other our audio/video system Ethernet cables (two rooms, each show 3 cables, one for the Smart TV, APR or other devices requiring an update and media coils).

  I want it is-

  1. to put WiFi on my parents. After reading the article, I followed the instructions, linking the TC with my iMac, turn off the "WiFi" on the TC & activation of Bridge mode. I got the TC & tried to thread failed. Run the cable to the Lan port of the router to the WLAN or a LAN on the TC port? I want to use the TC in this way, so I can release the LAN ports of the router, which I have 3 (Gigabit). The 4th is used for the Internet. I then connect an Ethernet cable between a LAN on the TC to the BS port extreme airport as before. I have to configure EI?

  2. I want the Ethernet of CCTV cable through the TC rather than use one of the ports on the router, which is the situation at present. (Of course I don't want another outgoing cable TC goes to the router as it defeats the purpose to release the ports on the router.) I wanted to lift as soon as possible the line & it was the fastest way. We had trouble getting food for the mobile, but once the camera system has been reset to HDCP problem has been fixed.

  3 tips on how to manage the flow of both BC I was hoping to give each player to medis/streamer a port on the router, but I'm still short of some?

  Once configured, I was hoping to use Time Machine from time to time, which means I needed to take the TC on the network and replace it afterwards or is there another way?

  A lot of questions, sorry. Networking is a pretty big unknown.

  Thanks a mil,

  CAPO Dino

  Run the cable to the Lan port of the router to the WLAN or a LAN on the TC port?

  Yes, at least to make the configuration correctly.

  I have to configure EI?

  Possible... Although it should have always in bridge.

  Always start a new network with a complete factory Setup configuration.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  Connect as you said... Ahmed to TC WAN LAN.

  Make the configuration of the TC. It is necessary to bridge... (Tab network, router mode... OFF (bridge mode).

  The Internet tab should also be on DHCP.

  You should see that it gets an IP address from the Fritz... and passes DHCP requested from customers (without wireless or ethernet) through to the Fritz so.

  2. I want that the cable Ethernet of CCTV through the TC rather than use one of the ports on the router.

  In bridged TC should not be a problem.

  3 tips on how to manage the flow of both BC I was hoping to give each player to medis/streamer a port on the router, but I'm still short of some?

  Transport CANADA ports should work.

  However if you are having problems... now go out and buy a 8 ports gigabit switch... It is extremely cheap point now and better than being frustrated by the lack of ports. I run a complex system... but everything is connected via a 16 port gigabit switch. So I never need to mess with the majority of the cables... it does not move even if Exchange you routers and AP autour.

  Once configured, I was hoping to use Time Machine from time to time, which means I needed to take the TC on the network and replace it afterwards or is there another way?

  Which should be as good... but I also warn you that Mac OS is lost very quickly now. It must connect by ethernet or wireless directly to TB without going through the Fritz. For some strange reason, Apple have evolved in network features that are not compatible... for example, Hello is very important and the Frtiz could be contravention.

  http://www.IP-phone-Forum.de/showthread.php?t=281365

  Just do a google for Fritzbox and Hello... you will find many articles... There are questions.

  Yes for apple not in line with the standard network world.

  As you can see other problems may arise as quickly...

  One of my solutions is to use the static IP address instead of the Bridge mode.

  Here's a post I did with a bunch of screenshots to explain it.

  Try it and see if it helps... assuming that you would have trouble...

  I can give specific information if you give me some screenshots of the configuration of the Frtiz... LAN and DHCP IP range.

  Re: time capsule Airport Guard disconnection

• Cannot connect Tecra 8200 wireless network

  I have an old laptop Tecra 8200, I recently bought a wireless router but I can't get the laptop to connect to it.
  He sees the network and attempts to connect to it, but after a few minutes it stops and returns looking for available wireless networks.
  The laptop uses windows XP with service pack 2.
  Everything on the laptop is standard and I did no improvement to him so there the standard network card. I don't know if this is the problem and that is that I'm not sure what network card enough.

  What card Wlan do you use?
  Check Wlan card details in the Device Manager.

  Looks a bit a problem of compatibility between the wireless network card and router.
  Please make sure that your wireless network card uses the same Wlan standard IE. 802 11 B G etc. as the Wlan router.

  What you could do is update the Wlan driver too.