Standard networking

Similar Questions

• Standard network naming

  [I have three hosts \[vm01, vm02, vm03\] in a single cluster \[CL01\]. On each host, I have a virtual switch with two standard networks - one for mgmt and a single port group. On dv01, I named these VM01Network and VM01MgmtNetwork. VM02 and 03, I simply changed the numbers in the names to match. Therefore, each host has two networks and the cluster has three networks port group... VM01Network VM02Network and VM03Network - in other words, each host has a different virtual network name...

  Is this properly configured? I intend using FT and HA. Do I need all these names are the same? Is what makes them different better? TO be clear, if you look at a map of the cluster you see three unconnected cards.

  The names MUST be the same for vMotion (and I guess) FT to work.  This is because the name is what the NETWORK card in the VM properties is related to.  When the virtual machine is moving to a different host, he finds the correct port group by matching the name.

  Virtualization of happy!

  JP

  Please consider awarding points for correct or helpful answers

• Migrate standard network switch to VDS

  Hello

  I intend to migrate little my clusters that are running in a standard switch to DVS. Need help to automate this process.

  My scenario is:

  In a 15cluster environment are present 5 are already running in DVS
  but 10 clusters are still a standard switch so I need to migrate the
  already existing DVSwitch.

  By taking a cluster of 10node as an example.
  (1) mgmt and vmkernel are on a vswitch (ex: vswitch 0)
  [vswitch 0 - connected with 2 vmincs]

  (2) virtual machine in a vswitch portgroup (Ex: vswitch 1)
  [vswitch 1 - connected with 2 vmincs]

  On all groups, we need to migrate only machine virtual portgroup
  or vmnetwork (ex: vswitch 1) to off-network vmkernel mgmt DVs.
  My plan:
  First add all cluster hosts to DVswitch
  Remove all a redundant vmnic (ex: vmnic3) connected to the machine virtual portgroup. (Ex: vswitch) 1 and adds it to DVswitch.
  Now migrate all virtual machines connected to a standard switch to dvs. (Here I hit)
  Is it possible if VLAN 10 (standard switch) then consists of 5 virtual machines
  check the VLAN 10 DVS and portgroup network set to 10 VLAN adapter on the
  SMV (I mean can we compare VLAN ID on VSS and VDS and inspiring than us)
  need to migrate virtual machines to a DVS.)

  As below:

  

  
  If it works correctly then you have to check the State of all virtual machines (ignore power VM off) ping
  If ok then proceed to map the second network card (ex: vmnic4) VSS for VDS.

  Use the Script:

  # ESXi hosts to migrate from VSS to VDS
  $vmhost_array = @("host1","host2")
  # Adding Hosts to existing VDswitch
  $vds = Get-VDSwitch -Name "SM_UAT"
  foreach ($vmhost in $vmhost_array) {
  # Add ESXi host to VDS
  Write-Host "Adding" $vmhost "to" $vds_name
  $vds | Add-VDSwitchVMHost -VMHost $vmhost | Out-Null
  # Migrate pNICs to VDS
  Write-Host "Adding vmnic2 to" $vds
  $vmhostNetworkAdapter = Get-VMHost $vmhost |Get-VirtualSwitch -Name "vswitch1" |select -ExpandProperty Nic |select -First 1
  $vds | Add-VDSwitchPhysicalNetworkAdapter -VMHostNetworkAdapter $vmhostNetworkAdapter -Confirm:$false
  # Migrate VMs from VSS to VDS
  Write-Host "migrating vms from VSS to VDS"
  }
  
  
  
  
  
  
  
  
  
  
  

  
  

  Maybe try like this

  # ESXi hosts to migrate VSS to VDS

  $vmhost_array = get-VMHost-name 10.50.37.31

  # get existing VDswitch

  $vds = get-VDSwitch-name "Pre-production".

  foreach ($vmhost to $vmhost_array)

  {

  # Add ESXi hosts service VDS

  Write-Host-object 'Add' $vmhost 'to' $vds

  $null = $vds |

  Add-VDSwitchVMHost - VMHost $vmhost

  # Natachasery to VDS migration

  Write-Host-object «first extraction vnic connected to vswitch»

  $vmhostNetworkAdapter = get-VMHost $vmhost |

  Get-VirtualSwitch-name "vswitch1 |

  Select-Object - ExpandProperty Nic |

  Select-Object - 1 first

  Write-Host-object "Removing vswitch vnic.

  $vmhost |

  Get-VMHostNetworkAdapter-name $vmhostNetworkAdapter |

  Delete-VirtualSwitchPhysicalNetworkAdapter-confirm: $false

  Write-Host-Object "RΘcupΦre removed vnic in a variable.

  $Phnic = $vmst | Get-VMHostNetworkAdapter-physics - name $vmhostNetworkAdapter

  Write-Host-object "adding vmnic (redundant) to ' $vds

  Add-VDSwitchPhysicalNetworkAdapter - DistributedSwitch $vds - VMHostPhysicalNic $Phnic - confirm: $false

  # Migrate virtual machines from VSS for VDS

  Write-Host-Object «RΘcupΦre virtualPortgroup vswitch info»

  $vssPG1 = $vmhost | Get-VirtualPortGroup - VirtualSwitch "vswitch1.

  Write-Host-object "migration of VSS for VDS vms."

  foreach ($vssPG to $vssPG1)

  {

  $dvsPG = $vds |

  Get-VDPortgroup |

  Where-Object - FilterScript {}

  $_. ExtensionData.Config.DefaultPortConfig.Vlan.VlanId - eq $vssPG.VlanId

  }

  $vmhost |

  Get - VM |

  Get-NetworkAdapter |

  Where-Object - FilterScript {}

  $_.NetworkName - eq $vssPG.Name

  } | Together-NetworkAdapter NetworkName - $dvsPG.Name - confirm: $false

  }

• Standard network config switch

  I'm just up an environment VSphere 5 and running for the first time.  It is the way I have the network currently installation.  I was wondering if I should split the network management and VMotion on in separate vSwitches.  Management and VMotion are configured to each use one of the physical NETWORK adapter while the VM network is sharing the other two physical NIC resources I use to implement illustrates the configuration of the network both directions, but does not specify which is the best option.  Thanks in advance for any help!

  

  I think it's important that you choose a different range of IP subnet for the other than the management network vMotion. Your configuration now I believe that you will not use the vMotion VMkernel at all, only the other interface management and vMotion.

• New router ' Fritz! Box "7490, reconfiguration of network"

  I just upgraded my router, Fritz! Box 7490, & I need to re-set my network help please.

  Before the upgrade, I had a very old router Aolynk. This was connected to my TC, the last giving us WiFi for our House, but also my parents House, via an Ethernet cable connecting the TC at the airport Exremem BS. Beside that, I use the TC to occasionally save the iMac & the RMBR & the old router sent our CCTV to phones via an Ethernet cable. The new router is now the primary device & our hub WiFi (Wireless AC active). I read an article that I thought would help, but I had no success.

  I need assistance with the above, and some tips on how to host 6 other our audio/video system Ethernet cables (two rooms, each show 3 cables, one for the Smart TV, APR or other devices requiring an update and media coils).

  I want it is-

  1. to put WiFi on my parents. After reading the article, I followed the instructions, linking the TC with my iMac, turn off the "WiFi" on the TC & activation of Bridge mode. I got the TC & tried to thread failed. Run the cable to the Lan port of the router to the WLAN or a LAN on the TC port? I want to use the TC in this way, so I can release the LAN ports of the router, which I have 3 (Gigabit). The 4th is used for the Internet. I then connect an Ethernet cable between a LAN on the TC to the BS port extreme airport as before. I have to configure EI?

  2. I want the Ethernet of CCTV cable through the TC rather than use one of the ports on the router, which is the situation at present. (Of course I don't want another outgoing cable TC goes to the router as it defeats the purpose to release the ports on the router.) I wanted to lift as soon as possible the line & it was the fastest way. We had trouble getting food for the mobile, but once the camera system has been reset to HDCP problem has been fixed.

  3 tips on how to manage the flow of both BC I was hoping to give each player to medis/streamer a port on the router, but I'm still short of some?

  Once configured, I was hoping to use Time Machine from time to time, which means I needed to take the TC on the network and replace it afterwards or is there another way?

  A lot of questions, sorry. Networking is a pretty big unknown.

  Thanks a mil,

  CAPO Dino

  Run the cable to the Lan port of the router to the WLAN or a LAN on the TC port?

  Yes, at least to make the configuration correctly.

  I have to configure EI?

  Possible... Although it should have always in bridge.

  Always start a new network with a complete factory Setup configuration.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  Connect as you said... Ahmed to TC WAN LAN.

  Make the configuration of the TC. It is necessary to bridge... (Tab network, router mode... OFF (bridge mode).

  The Internet tab should also be on DHCP.

  You should see that it gets an IP address from the Fritz... and passes DHCP requested from customers (without wireless or ethernet) through to the Fritz so.

  2. I want that the cable Ethernet of CCTV through the TC rather than use one of the ports on the router.

  In bridged TC should not be a problem.

  3 tips on how to manage the flow of both BC I was hoping to give each player to medis/streamer a port on the router, but I'm still short of some?

  Transport CANADA ports should work.

  However if you are having problems... now go out and buy a 8 ports gigabit switch... It is extremely cheap point now and better than being frustrated by the lack of ports. I run a complex system... but everything is connected via a 16 port gigabit switch. So I never need to mess with the majority of the cables... it does not move even if Exchange you routers and AP autour.

  Once configured, I was hoping to use Time Machine from time to time, which means I needed to take the TC on the network and replace it afterwards or is there another way?

  Which should be as good... but I also warn you that Mac OS is lost very quickly now. It must connect by ethernet or wireless directly to TB without going through the Fritz. For some strange reason, Apple have evolved in network features that are not compatible... for example, Hello is very important and the Frtiz could be contravention.

  http://www.IP-phone-Forum.de/showthread.php?t=281365

  Just do a google for Fritzbox and Hello... you will find many articles... There are questions.

  Yes for apple not in line with the standard network world.

  As you can see other problems may arise as quickly...

  One of my solutions is to use the static IP address instead of the Bridge mode.

  Here's a post I did with a bunch of screenshots to explain it.

  Try it and see if it helps... assuming that you would have trouble...

  I can give specific information if you give me some screenshots of the configuration of the Frtiz... LAN and DHCP IP range.

  Re: time capsule Airport Guard disconnection

• Cannot connect Tecra 8200 wireless network

  I have an old laptop Tecra 8200, I recently bought a wireless router but I can't get the laptop to connect to it.
  He sees the network and attempts to connect to it, but after a few minutes it stops and returns looking for available wireless networks.
  The laptop uses windows XP with service pack 2.
  Everything on the laptop is standard and I did no improvement to him so there the standard network card. I don't know if this is the problem and that is that I'm not sure what network card enough.

  What card Wlan do you use?
  Check Wlan card details in the Device Manager.

  Looks a bit a problem of compatibility between the wireless network card and router.
  Please make sure that your wireless network card uses the same Wlan standard IE. 802 11 B G etc. as the Wlan router.

  What you could do is update the Wlan driver too.

• Network drivers for Laserjet p2035n

  I'll put up a Laserjet p2035n a network printer on a Windows 2003 server, which is already installed on another computer.

  I have the IP address and create a new standard TCP/IP port, but the HP site has only USB drivers (even for the N). I just need ordinary network drivers.

  Please notify.

  Hello

  You can either use the standard Plug-and-Play drivers by running the installation, then stop and add the printer through the windows have a printer dialog box. the software can be downloaded here:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=3662025&prodNameId=3662049&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=lj-65822-1

  Select Add printer and follow the steps in creating a Standard TCP/Ip port providing the IP address of the printer.

  Follow the steps until the selection of the model is listed.

  Click disk, and then navigate to C:\Program HP HP LaserJet P2030 series (can also be included under Program Files (x 86) to 64-bit operating system), from there select the displayed INF file and select your printer.

  Follow the steps to complete the wizard.

  For a standard network installation, you can use the complete software below:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=3662025&prodNameId=3662049&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=lj-65873-1

  Shlomi

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WAG160Nv2 with the last FW asks for network authentication user: past after past wireless

  I have updated to the latest FW today.
  But all of a sudden when I try to connect wirelessly to it.
  He asks me to authenticate network right after that I entered the wep wireless password.

  It never asked before with the previous firmware.
  And I have no idea what is the user/pass.

  Can someone tell me what it is?

  Thnanks

  This looks like standard network authentication. Go into the control panel. Network connections. Open the properties of the wireless network connection. Should be an Authentication tab where you have enabled authentication for 802. 1 x.

• HP Officejet Pro 8100: HP Officejet 8100 N811a - network connection is not possible

  Hello community,

  I have a pretty standard network with 3 points of access, WPA - PSK authentication, TKIP/AES encryption, running on channels 1-11. I made the MAC filtering is off and DHCP is on.

  The printer connects to the network, or via the software of HP Doc or the EWS settings.

  It's however possible to connect the city nearby networks so I must be overlooking something.

  After that under the HP Doc and he's trying to set up the printer I just get an exemption from the unknown error.

  The printer prints fine when connected by cable.

  The Network Configuration after the eroor HP Doc said

  Wireless on : Pass
  Wireless Working : Pass
  
  Connected : Not Run
  
  Network Name Found : Pass
  
  Printer Settings Consistent : Not Run
  No Filtering : Not Run
  Channel : Not Run
  Security : FAIL
  
  And in the Configuration it lists the SSID but IP Adress states : not applicable
  

  Ideas?

  Hi @NK10,

  Welcome to the Forums of HP Support!

  I see that you are unable to connect wirelessly with your HP Officejet Pro 8100 printer. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you mentioned that you have "3 APs, authentication WPA - PSK, AES/TKIP encryption, running on channels 1-11 I made sure MAC filtering is off and DHCP is on. »

  First, I'll assume means AP access point.

  • WPA2-PSK (TKIP) WPA2-PSK (AES) and WPA2-PSK (TKIP/AES) are all different encryption options. Which one do you use?
  • Do not use more than one type of encryption at the same time, what access points help.
  • The router is connected to one channel at a time, not 1 to 11. What channel are you on?
  • DHCP should only be enabled on the router and disabled on each access point.

  Looks like the access points are configured incorrectly. They should have the same type of encryption and be on the same channel as the router. If the printer works well on the wired connection the wireless network configuration is causing a conflict.

  Tips for a successful wireless connection:

  • Using a unique network name (SSID).
  • Make sure you have 802.11 g active.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz and 5.0 GHz network names are not the same. Rename the 5.0 GHz network.
  • Don't hide your SSID (network name).
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch?
  • Do not use a network of comments (SSID).
  • Disable UPnP on the router.
  • Set the router to 20 Mhz only, or 145Mbps depending on the router.
  • Update the firmware on the router.

  For troubleshooting purposes, follow these steps:

  1. Disable all access points.
  2. Connect the printer to the router wirelessly.
  3. Test print.

  If the printer works fine wireless connected access points, you must reconfigure the access points correctly. HP does not support the networks with access point, additional router or switch, etc. The complexity of the configuration.

  For more information, see print wireless Center.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Computers on the ghost network

  Hello
  I'm helping a friend with its network of small business office.
  I don't have all used Vista but I am strong user of Xp
  Are behind a Netgear FR114p firewall firewall and have 3 Vista 64,
  PC1. PC2 and pc3. PC2 has a printer (usb5) usb which is shared with pc1.
  When you add the printer to the mapping network poster pc1 and pc2 pc3.
  then the printer is added, but the test page does not print.
  All computers have been setup with vista standard network options selected
  All use dhcp. all three are supported iv6p.
  the PC1 network name is network4 and see the local and internet access
  the PC2 network name is networking6 and show to local and internet access
  the PC3 network name is work and shows access to internet

  PC1 and pc2netwok maps show the following
  computers: pc1, pc2, pc3, oc-pc1 and pc2-OC pc3 map shows just pc1.
  PC2 and pc3.

  When I looked up pc1 printer installation it showed printers location only
  \\pc-oc\usb5 (xps). This computer (pc2-oc) is not real.

  What are these ghost computers? Is it a private network local iv6p?
  How can I get info on them? Can just the gasket on the watch i

  printers.
  I don't have access to the network right now so I can not answer in detail

  questions. I'm sorry I bad form...
  I would get pointed in the right direction for this problem.

  Th

  Hi joexaung,

  Recycle the router by turning power on and off and check.

  You can download and install the update available in the link below

  Duplicate computer names are generated when configuring an Unattend.xml file to generate random names for several computers on a network

  http://support.Microsoft.com/kb/973033

  For more information, see the link below:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  This might interest you:

  What is Windows Connect now?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-Windows-connect-now

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 freezes when connected to a network

  I have a computer that is running Windows 7 x 64 edition and an Acer notebook running Windows 7 x 86 edition and I have this problem on both of them.  The BIOS is upgraded to the latest version, all Windows updates and the latest drivers are installed.

  If I connect a router that is permanently connected to the internet (internet is provided through the connection standard network) or one of the computers, everything works fine.  My computers are always on and even for the days without rebooting.

  However, as soon as I connect to the internet manually (or a virtual private network) via the network and sharing Center (which means that my network sharing Center shows that I am connected to my network and the second connection), the computer hangs after a few moments.  If I nothing, just leave the computer on idle when you are logged in this respect, it can take anything between 5 minutes and a few hours before it freezes.  If I'm working on the pc, usually only a few minutes.  If I listen to music (for example Winamp) while working, less than 5 minutes.  This happens regardless of what application I work in (Visual Studio, Outlook, Excel, Google Chrome) and no matter if the request, I work uses the network that I am connected or not.

  OK, the gel.  What happens is the computer crashes completely.  The mouse pointer stops to move and no keys or whatever it is that you can get the computer out of the gel.  Must reset hard.  No event log is created.  If music was playing before the Frost, the last note that was played just repeat until reset.

  It's not a too big problem on my pc that I'm usually connected to a DSL router, but on the laptop that I use for travel, it is a huge problem because I connect to the internet using a 3G dongle which shows as a network that I am connected in the network and sharing Center.

  Laptop is an Acer Travelmate 6592 G.  I used to run Windows Vista x 86-based computers and never had this problem.  I had this problem on my pc and laptop with Windows 7 x 86 edition, and then a clean installed x 64 on a new partition on my pc.  The problem is there from the beginning (before anti virus or all other installs).

  My apologies.  I should have updated this thread.

  On my side, it seems that AVG was the question.  As soon as I removed AVG, the problem disappeared.  I am now using Avira on my pc with Microsoft Security Essentials on my laptop... Did not have a single freeze since about June and my computer is never turned off.

• Windows Media Player very slow on network

  After having upgraded to Windows 7, I noticed that Windows Media Player 11 is painfully and stupidly slow, during the handling of the media streamed on my network.

  A playlist with just 100 items may take minutes to load and actually it scrolling... Well, glacial activity seems fast in comparison. I actually cannot scrolling playlists from a PC on a network - it's this slow. It is enough to click the scroll bar and hope I hit to the right place!

  Once that she's going to get, that's fine. The media broadcasts nicely and theres no lag. However, for the first two minutes, I can't jump on video, or pass them / prev item...

  Is this a known issue? Perhaps with knowledge to solve?

  Boring technical details:

  PC running Win 7, server with media running Windows Vista SP2.
  While the server is not exactly modern, do not this slow - it responds very well when you use desktop to distance or standard network of navigation, for example.

  Playlists are created by mounting the disc of servers and just drag media in the playlist. Nothing complicated.

  Any help would be appreciated!

  Kind regards

  Søren Andersen

  Do not be anxious, but bump :)

  WMP 11 will never work in Windows 7. WMP 12, it's what works. Programs and features / 'Activate Windows features and turn off' has a check box for this.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Network on the virtual computer is not updated after changing the image or

  Hi all

  I encountered a weird problem with one of the pictures gold.

  What I did:

  1 remove Image network adapter gold

  2. addition of new network card and the new network in the annex

  3. power on the Image or

  have 4 you communicated an ipconfig/renew

  5. check that it is in fact now pulling an IP from the new network

  6. picture power off gold

  7 snapshot

  Now after you apply the new snapshot with the new network adapter to the pool and do a recomposition, still have all VM the old network attached to it.

  What Miss me?

  Thank you

  I think that what is expected - after you create a linked clone, its network settings are retained through operations of discount/redial. To view documents:

  "In the View Composer recomposing and rebalance operations, a best effort is made to ensure that the label of each card network NETWORK attached to each workstation linked clone is kept when a clone related new NICs inherits a new base image. View retains the label of network with a NETWORK card that was in place before the operation to reconstruct or rebalancing as the new base image has an available NIC configured with the same type of network switch. (A NETWORK adapter can be configured with a standard network or distributed virtual network switch switch.) »

• VM with 1 NIC shows a standard portrgoup and a distributed portgroup?

  It's confusing me. I'll put up a distributed switch, and I have all my exchanges set up, each corresponding to the standard portgroup (IE, 1 standard for VLAN 15 portgroup and 1 portgroup distributed to VLAN 15, etc.).

  So I have a win 2008 R2 VM, with 1 NIC and I shut it down and changed is the portgroup to the equivalent distributed portgroup standard networking (e.g., the portgroup distributed for this VLAN). I made this as a dozen times already, for other virtual machines, and it's all worked fine. This time, however, this adds the portgroup distributed, but also leaves the portgroup standard.

  And I don't know why. With 1 card NETWORK, the settings of the virtual machine are showing the NETWORK adapter with a network connection to the distributed portgroup, as it should. Yet the component resources in the watch vSphere client * two * portgroup standard and distributed. All cards that are in the vDs are in LACP mode (we connect to a 6513 Cisco using 10 G of fiber NICs). VDs has 1 NIC of each host, and the standard switch on each host has the other NETWORK card, so I can migrate virtual machines between the two without loss of connectivity.

  I have connectivity, I ping the virtual machine. I see the virtual machine in the distributed portgroup look the vDs. I see it also in the portgroup standard (this standard switch has no adapters, so it can actually do something, do not send/receive). If all the packages must be from the portgroup distributed (as it should).

  Clues about where to look next? I checked the VM, there is only 1 NETWORK card in Windows, no hidden devices NIC so why does he want 2 trade? And how can I say this not to do?

  All ESXi hosts are the ESXI 5.1 U1.

  Thank you

  It is resolved, with the help of Technical Support. This virtual machine has a snapshot, which is why he wanted the portgroup standard and the portgroup distributed. I deleted the snapshot, and now everything's fine.