Start bar Windows suddenly moved up when I started my pc
Hi, today when I opened my PC my start bar is installed on the top of the screen without reason. I moved it to the bottom of the screen, but I'm really worried because someone might be in my PC because I had a similar problem on Skype.Please answer because I'm very worried about it!
It's here. Note the drop down in the middle...
Tags: Windows
Similar Questions
-
Original title: windows cannot find c:\windows\system32\control.exe
Using Windows Vista 32-bit SP2. I get the message: windows cannot find c:\windows\system32\control.exe when you try to start Control Panel. I have to solve as soon as POSSIBLE
Hello
1. What is the brand and model of the computer?
2. What is the security software installed on the computer?
3. have you made changes on the computer recently?
Method 1.
Start the computer in safe mode and check.
Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode
If you are able to open in safe mode control panel, and then start the computer in a clean boot state and check.
Affecting system boot minimum state helps in the identification of third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Method 2.
I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833
Method 3.
You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.
Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
I hope this helps.
-
I have an email in my windows to send that cannot be deleted or moved. When I try to do, or I get a message saying error has occurred. This email continues all my other emails in my Outbox. How can I remove this outgoing email?
original title: problems with outgoing mailHow to remove an Undeletable Message stuck in Windows Mail
http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.htmlIf still no joy, try to compact and repair the database. -
Windows Defender will stop when the computer starts
Windows Defender goes off when the computer is started and occasionally when the computer is running. I bring up the Control Panel icon, click on restart and restart the program. I had this problem for a week but have not added new software for a fortnight. Everything ran happily until a week ago. I am running Windows Vista Home Basic on a Packard Bell Imedia 3312 UK computer, purchased in April 2009
Are you by chance using AVG 9.0 for your antivirus package? This version of AVG 9 automatically extinguished Windows Defender. Microsoft® Security MVP, 2004-2009
-
Windows Media Player opens when I type any key. This started 2 days ago and did the computer virtually unusable. The mouse is however immune to this phenomenon, so I can still use it.
No idea how to solve this problem?
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Do a system restore. Choose at least 3 days ago when you did not have this problem as your restore point.
Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
To sit and wait. The machine restarts when it's done.For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
* Original title: windows startup
Hi I have a windows computer 7 and when I start it up it says windows could not start then it says windows normally or repair I choose windows star normally and his coming as a code error 0x0000005c and I did they opsen others, but still the same error code I just wanted if I can back up my photos because they are good, or I can try to solve this
Thank you
The BIOS back to their default level settings.
- Make sure that all internal cables, cards, and other components are installed and correctly.
- Start your PC with essential hardware only.
If no change:
Perform Diagnostics on the memory and hard drive tests.
-
I have a paid subscription to cloud creative Illustrator and photshop. I had to make a computer reset due to windows 10 and now when I connect it says start trial?
-
original title: fallout3
Fallout3 and Broken Steel, Point Lookout was working fine in windows7 ultimate 24 hours ago now all of a sudden after loading when I hit continue it crashes, Intel processor Core i3-2100 3.10 GHz (Sandybridge) Socket LGA1155, Asus AMD Radeon HD 6770 DirectCU 1024Mo GDDR5 Mushkin Silverline #991768 4 GB (2x2gb) DDR3 1333 MHz 9-9-9-24, thanks in advance, Morgan
Hello
1 did you change on your computer?
2 did you receive an error message?
Fallout 3 is not compatible with windows 7. See the below link for the same thing:
Method 1:
You can even check this link: make sure to run older programs in this version of Windows: http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows
Method 2:
However, start your computer in a clean boot state, and see if that fixes the problem.
See How to solve a problem by performing a boot in Windows Vista or in Windows 7
Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.
-
Why Windows keep moving & hide my files with me?
original title: make him stop, please stop! Why Windows keep moving & hide my files with me?
Windows Vista using Media Player 11:
I am way in music and want to have recorded and named in a certain way. Sometimes in windows 'Explorer' I group songs into folders according to the albums I create (i.e. mixtures of burning); in this case, I'll keep the names from the same artist and change the name of the album (in properties) that I chose. As soon as I click on the folder 'Explorer' moves it somewhere, I don't think. Sometimes things end up in the trash that I know does not recycle. It also renames my files. For example, I had a song that I had saved the name of the file is: 01 History.wma; and the rest of the info has been saved in the properties (Album, artist, track number, etc.). As soon as I turn my head the computer renames it to something that looks like this: 01HistoryAtmosphereSevensTravels - UndergroundRap.wma. Why it does this and how can I stop it?
Hello
· It only happens with music files?
· When the issue started?
Step 1: Run Virus scan.
Try to scan the computer using Antivirus software because this problem can occur if the computer is infected with the virus. You can do an online scan by clicking on the link http://onecare.live.com/site/en-us/default.htm and clicking on the analysis of a complete Service and accept the agreement.
Step 2: Rebuild the data base of the media player.
Follow the steps in http://support.microsoft.com/kb/925718
Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I have Vista, and when you use the vertical scroll bar to move up and down on a page, EVEN if you press the arrow above or below, or use the real vertical scroll bar window keeps minimizing it IS VERY SENSATIVE TOUCH how to stop this from happening? It is very annoying when you think you're scrolling down and you get a MINIMISEE WINDOW in A SMALL WINDOW.
Hello Barbara Mary,.
1. What is the brand and the manufacturer of your computer, and the touchpad?
I suggest that you try to reduce the sensitivity of the touchpad the touchpad software installed on your computer. Reduce the sensitivity of the touchpad will take care of this issue.
a. Click Start and type mouse in the search field.
b. examine the left panel of the 'Properties' window and expand the option "sensitivity." Click on the option "Sensitivity to touch."
You can control and reduce sensitivity to touch.
Thank you
Irfan H, Engineer Support Microsoft Answers. -
All of a sudden my computer when I turn it on says Boot Device not found.
OT:Boot Device not.
All of a sudden my computer when I turn it on says device not found Boot, please install an operating system on your hard drive, hard Drivr - (3F0), F2 System Diagnostics. My cd/dvd does not work, but I have a flash drive and an external hard drive with the recovery on this disc but it does not start similarly access flash or external. F10 boi configure options to no effect. Help me please
Hello
Since then, will not start to any device, it's a hardware problem. If you need the help of the
Manufacturer of the system or a real computer store (that makes its own service in the workshop).I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
My windows Explorer stops working when I try to use the file menu on a file.
My windows Explorer stops working when I try to use the file menu on a file. If a file is selected in a folder that windows Explorer will be display Windows Explorer has stopped working the message box. This occurs only if a file is already selected and you click on the file option in the menu bar. All the other menu items work well if a file is selected or not, and if no file is selected the menu file works fine. I already ran SFC/scannow from the command prompt, but it returns no violation.
Hello
Thanks for posting your question in the Microsoft community forum!
I understand that you are having problems with Windows Explorer. I'll help you solve the problem. To be able to understand the question in a better way, I would like to ask you a few questions.
(1) did you make any changes before the show?
(2) how often does the problem occur?
Method 1:
Step 1: You can check if the same problem occurs in safe mode.
Please follow the link on how to start the computer in SafeMode below.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Step 2: Perform a clean boot.
Put your boot system helps determine if third-party applications or startup items are causing the problem.
How to set up Windows 7 to start in a "clean boot" State
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
See also:
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Note: Choose a date before that the problem occurred as your restore point while performing a system restore.
WARNING: Perform a restore of the system can change your settings and delete your unsaved data. Do it at your own discretion.
Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved in Microsoft Windows.
-
hide the document window and set face-to-face progress bar window...
Hello world
We have created the command script to generate multiple files inx artlink reports and write to a text file.
Our script will open each document in the selected folder and generate reports of link art. To start at the end of the process of the progress bar window will be placed to display the status of the process. The problem is the progress bar window was sent back after the opening of each document. It is possbile to minimize the window so that the window of progress bar only displayed on the screen as front most window.
Can someone look into this and help out me. Thanks in advance.
Indana
When you open a document, you can specify whether the window should appear:
App.Open ("path/to/file.txt", false); does not display a window in the opening.
What is do the trick for you?
-
The old status bar showed a lock icon when a site secure - where is this lock icon in verse 4?
The status bar was along the bottom of the window. At the right end of the bar, a lock icon appears when you are on a secure site, as bank earnings or invoice. With the now missing status bar, where can I see this lock icon?
The lock is no longer a part of Firefox; It can give users a sense that a site is secure by not providing all the information related to a site. Familiarize yourself with the Site identity button in Firefox:
- https://support.Mozilla.com/en-us/KB/site+identity+button
- http://www.dria.org/WordPress/archives/2008/05/06/635/
You can install an add-on to display a padlock in the URL/address bar:
You need to update the following. The Plugin version (s) below has / have been submitted with your question and is obsolete. You need to update in order to avoid the known security issues with the version (s) you have installed. Click on 'more system info... '. "to the right of your question to see what was included with your question.
- Shockwave Flash 10.2 r152
- Check your plugin versions on one of the following links:
- http://www.Mozilla.com/en-us/pluginCheck/
- https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
- Note: plugin check page lacks information about all versions of the plugin
- There are links to tests specific plugin available on this page:
- Update the Flash plugin to the latest version.
-
I was able to burn DVDs & CDs for years on this computer, and then all of a sudden, nothing happens when I insert a disc.
Help!
Hello
· What is the number and the model of the computer?
· Were there any changes made on the computer before the show?
You can follow the steps from the link: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/982116
Maybe you are looking for
-
ThinkPad with transflexive, outdoor screens
Hello I want to replace my R51 with something a bit faster and lighter (T400, T61, X...).One of the most important features for me on the R51 is transflexive screen.The screen is readable in full sun with minimal background light. What current Thinkp
-
How do you attach a 'job action' of a droplet? The menu is there...
This has been discussed before, but I could not find a recent conversation that relates to the latest version... Compressor 4.2.1 OS X 10.11.2 As noted earlier, when saving a SETTING as a DROPLET, it doesn't seem to be a way to attach a REVENDICATIVE
-
How can I activate XP after the expiry of the grace period of 7 days?
A couple of weeks, my PC (home built with XP Pro OEM) downloaded a load of updates through Windows Update. This weekend was the first time that I had turned it on since then, and the logon screen XP tells me now that XP is not active any longer. I
-
After restoring to factory default of Vista, I lost my access to the Microsoft Office products
I recently had a severely damaged Vista OS, which after several attempts to recover and restore several restore points failed, I had to restore the default value of the plant from the D drive. The restoration was a success and my system now works fin
-
Why my network connection properties do not show more UAC prompt?
I can't put my connection properties more. In network & sharing center when I rightclick > properties on the connection interface, it shows no UAC prompt. I have disable Netbios over Tcp/ip, but every time that I connect it changes to default (enable