start the computer as if it was newly installed mozilla 19.0 begins

Similar Questions

• Installation of Vista on the new hard drive was interrupted, and now I can not start the computer

  So I decided that I need a bigger hard drive. I got a 500 GB hard drive, so I have it PLOPPED in my Acer Aspire 5517 with my vista boot drive, turned on and began to go through the process. Once he got to the phase 'installation complete' it seems to take a while, so I let it run all night. Once I got up, it was on a black screen with the mouse, I let stand a few more minutes but still nothing. I turned off and started it expects to find to return at the beginning of the installation, but instead he began to start from what is on the hard drive at this time. It got to the screen with the loading bar and the sign 'Microsoft Corporation'. The loading bar was very frigidity and stopped and started randomly. I let it do this while I went to school, but when I got home, it was always the same loading screen. I rebooted and tried to start in safe mode, but when I do it it stops at crcdisk.sys, and never forwarded charges. I tried to do the reset thing factory start it but that doesn't seem to work. My other puny hard drive still works, but the other does not. I searched the internet but have not seen any other problem like it. I want to just start completely clean of my new 500 GB. Please help!

  Hi James,

  1. What is the number of brand and model of the hard disk of 500 GB?

  2. How did the 500 GB hard drive connected to the computer? It is external or internal?

  To troubleshoot the unable to start the issue to cause corrupted driver, some files that can not be loaded during the startup process must be fixed or restored. So, let's check the disk by using the Windows Recovery Console.

  (a) put the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD ".

  (c) select a language, a time, a currency and a keyboard or another input method, and then click Next.

  (d) click on repair your computer.

  (e) (click on the operating system you want to repair), and then click Next.

  (f) in the System Recovery Options dialog box, click command prompt. Type chkdsk c:/f to try to correct the errors.

  (g) Note: answer them when chkdsk asks you if you want to check the disk next boot Vista

  (h) after the recording of the disc, and then run sfc/scannow to check the corruption of system files.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Check out TechNet help links and check if that helps:

  The computer starts stops at crcdisk.sys

  Help! Vista won't start... (crcdisk.sys)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Start the computer to a black screen after you uninstall a game.

  Original title: cannot start the operating system.

  OK I installed this game, so he has not ran smoothly and I uninstalled it. When it was above him asked if I wanted to restart the pc. I did and when I restarted it loaded the 1st screen and it became all black. so I decided that I restart again but same thing happened on n, I indeed that this stay for awhile on a black screen, thinking it will take some time to load up, but no, I put the windows CD boot in and pressed F12on starts from the CD-ROM, the CD-ROM began checking for hadrware and other things , but in the moment, it says install from the screen went blue with white letters saying error. He says can be caused by the virus, malware or any newly installed software. I rebooted and now I'm under certain diagnoses by symptoms - came with my dell pc. so the symptom I am scanning is "can not boot the OS" no results to present but can someone help me? or tell me hor run in safe mode or anything like that? THX

  Hi VladKrem,

  You receive the rattling of the computer?

  I recommend you perform the upgrade on Windows XP site & check if it helps.

  How to perform an upgrade on the spot (reinstallation) of Windows XP

  Hope the helps of information.
  Please post back and we do know.

• I tried several times to set up an email account with Thunderbird, but the next time I start the computer and start Thunderbird, no account is displayed.

  I bought a new desktop PC with Win 8.1 and installed Firefox and Thunderbird.
  Then, I tried to set up the e-mail account manually (in IMAP) following the instructions here: https://support-en.upc-cablecom.ch/app/answers/detail/a_id/22 , but can't set the mail server outgoing smtp correctly (I could receive mail but not send them). Subsequently, I deleted this account. Then, I started the automatic mail with UPC Cablecom under the http://www.upc-cablecom.ch/content/dam/www-upc-cablecom-ch/Support/executables/upc-cablecom-email-assistant.exe link tool and he did successfully set up the account, however, because a POP3 server account. As I was not happy with it, I deleted the server of incoming POP3 mail (and lost the e-mails received, of course...) and retried a manual installation. In doing so, I got an e-mail account IMAP incoming more two outgoing SMTP server (comparing them, I also understand the configuration error that I had done the first time). I then deleted the manual as SMTP server the automatically the installation server worked correctly.
  In this context, accepting them and sending E-mail worked OK. However, the next time I started the computer, the e-mail account disappeared and Thunderbird was asked to set up a new account again. I have successfully set up manually once more, but the same problem resurfaced at the next startup, the e-mail account was gone...!

  Thank you in advance for your help!
  Maxonce

  Verify which profile is used.

  AppMenu button - help - troubleshooting - profile directory - Open Directory information

  Your profile folder should open in Windows Explorer. What is the location of the profile?

  Restart your computer and repeat the steps above. The profile folder has changed?

• How can I get rid of a 'sidebar' (an additional site without on the left of the screen) that is still there after restarting Firefox and even cold, start the computer?

  I opened a Web site of the library without specifying "in a new tab. I expected to crush the existing active tab. Instead, he opened in a demi-fenetre on the left, without tab and without all the icons "Min/Max/Close. I can not close it even by restarting Firefox or stop and start the computer. He now appears on each screen in Firefox with each tab. I note the address of the site to be replaced, but the offending site is https://servicing.capitalone.com/c1/login.aspx.

  There is an 'X' in the top right of the sidebar.
  You can replace it with a different sidebar; Therefore, you can use "Ctrl + B" to bring up the sidebar bookmarks, use "Ctrl + B" once more to turn it took off.

  Click on the star to bookmark to bring up the bookmark, in the lower left corner, if you see the following, uncheck the box.

  [X] load this bookmark in the sidebar.

  You can right click a bookmark to display the bookmark properties, uncheck the "load this bookmark in the sidebar".

  In the sidebar

  1. Right-click to bring up the Page Info
  2. Triple - click the url
  3. use "Ctrl + B" to bring up the Bookmarks Sidebar
  4. Paste the url in search, then right click on the found object to bring up the bookmark properties

  In the list of Favorites library there is unfortunately no column in the list of library of favorites for this feature, but you can click on the bookmark and properties will be displayed on the box under the same information, if you see a drop-down list "gone" click to view the list of properties.

  If you want to see the extent that you have these bookmarks you export our bookmarks in bookmarks.html file and then view the source and use of find for WEB_PANEL = "true" - I have the extension 'Search all', so I can see how many times the string occurs and where.

  It has a turbulent history, it is useful as a reference column, but it was destroyed in Firefox 3, after use in a link, use, restoration of use later but not keyworded bookmarks and not places links both where it makes sense to break. Remained at does not not for keywords because they wanted to destroy the mot-cle--Word key lost for a year in the beta version of Firefox 3. Now, it must be eliminated because few people (can) use it (properly), but they will make this inaccessible box first - someone ' else see the additional error with that.

• Unable to start the computer after the installation of Windows updates

  original title: same problem with the other oddities.

  I also have a computer down the update.  Although I tried several times to start the computer from the installation CD re, when I get to the page where I have options to fix or exit, locks from my computer to the top and will go no further.  Suggestions how to get the computer to boot the CD and allow me to choose the repair option without locking up?  Thank you!

  I finally managed to get the reinstallation CD to load.  I also spoke with telephone tech support at Microsoft who helped me to descend KB977165 my system.  After that was removed the computer booted without error.  By MS tech, I am also running the anti-virals and malicious programs to see if they detect all the other infections.

  Originally, the CD would load to the point of being able to choose between the options: continue to fix or exit.  At this point, the computer froze upwards and would not all repairs in order to remove KB977165.  Microsoft launches a call again tomorrow in order to install safety free bug so far.

  Thanks for your reply.

• Update Windows Crititcal 7/15/1010 has restored the settings of the computer as if it was brand new.

  Update of Crititcal title: original Windows 7/15/1010

  When I closed my computer last night, the computer indicated that an update critical would be complete installation on closing down.  This morning after my computer (with Windows 7) has been turned on, I found a lot of programs assists or reset to original settings (means that all previous information/data alleys) where I have to configure all settings.  It's as if it was a new computer where I have to install my security, games, configure Outlook Office, etc. !!!   I raised my system retore and it showed my last checkpoint was the critical update!  There is no other control point!   Has anyone else had this problem with this last update?  I feel I have to do everything from scratch.

  Hi Krakenlord,

  -You have several user accounts on your computer?

  Step 1

  If you have several user account make sure you have loged in your user account profile and check if you can see the files.

  Step 2

  Start the computer in safe mode and check if you can see the files and program and post the result. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  Access the link to learn more about how to start the computer in safe mode:http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  Step 3

  I would say also allows you to perform a system of restore from safe mode to check if you have any other old restore points, and if you can restore the computer to an earlier date where you had all the files on the computer and see if you can get it back.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Access the link below to learn more about how to repair the operating system and how torestore configuring operatingsystem to a point in time earlier in Windows:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  Step 4

  I also suggest you to access the folder of the user on your C drive and check for any other user account. If you find any other user account tries to access the folder of the user account and check if you can find the missing files in the folder of user account and post back the result.

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get a box to enter the password when you start the computer

  * Original title: turn my computer

  When I start my computer, I get abox asking you the windows xp startup password.  This has never happened before and I don't know the password.

  Hello

  -Have there been recent changes made on the computer before the show?

  I suggest you to check if you can connect to your account or the account of default administrator in safe mode.

  Check out the link for more information on how to enter Safe Mode.

  A description of the start in Windows XP Mode options:
  http://support.Microsoft.com/kb/315222

  a. the built-in Administrator account is disabled by default.

  b. you will see an icon for the administrator on the homescreen mode without failure.

  c. connect you (the password will be a white)

  If you are able to start the computer in safe mode, try to check and restore the system.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Important: System Restore will return all your files non-system as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Please get back to us with the information above to help you accordingly.

• Error: "one of the drives should be checked for consistency" to start the computer

  The original title: disk space

  My laptop is an Acer Aspire 5000 running with XP Home Edition. At a hard 100G drive with 2 partitions fat. Recursively shows problem at startup. The message displayed is "one of the drives should be checked for consistency. So when he was checked always check disk space and get stored at 41%. I tried to restore several times, but it is once again no place for a long time.

  Could you help me with this?

  Hi RodrigoGodinez,
   
  Sometimes the disk check always starts check the file system on one or more drives for consistency. If no button is pressed, the disk check is aborted. In fact, it is because a data structure of the disc or file is corrupted which can not be recovered and check disk always runs at Windows startup.
   
  Restart the computer and run the command chkdsk from the recovery console.
   
  To boot into the recovery console, see the following article:
  Description of the Windows XP Recovery Console for advanced users
   
  Additional reference on:
  Recovery Console overview
   
  For more information about the disk check, see:
  How to perform disk error checking in Windows XP
   
  Note: While running chkdsk on the drive if bad sectors are found on the hard drive when chkdsk attempts to repair this area so all available data on this risk to be lost.
   
  If the disk check done in start the computer every time, here is an article that could be useful for:
  Chkdsk.exe or Autochk.exe starts when you try to shut down or restart your computer

• How to stop the pop-up for saving files when I start the computer?

  I was going to save files on a drive of DVD-CD-R, but I decided to do not, how can I stop the pop-up for saving files when I start the computer? It keeps appearing even though I cancelled check?

  * original title - cancel recording of dvd/cd-rw *.

  Hello

  Windows displays a temporary storage area where files are held before they are copied to the CD. Files or folders located in the temporary storage area are listed under files ready to be written on the CD.

  Try the steps and check them off below if it helps:

  a. double-click my computer and then double-click the CD burner.

  b. under CD writing tasks, click on delete temporary files.

  When you delete the contents of the temporary storage area, you can set this field to another set of files and folders that you want to copy to the CD. The files are not deleted from their location on your computer or on the CD.

• Deleted documents/records office after you start the computer

  I start the computer as usual, and when it has finished loading, it had deleted everything on my desk with the exception of My Documents, desktop and Adobe Acrobat Pro 9 icons. It was a random event that I had no problems with my computer. Anyone know what's happened and how I can restore everything I had?

  Hi sa521,

  ·         You have all your documents?

  ·         You receive an error when you connect to the desktop computer?

  ·         Were there a change made recently?

  Method 1: Restart the computer to see if it boots normally with your user account.

  Method 2: Try to start the computer in safe mode and check the number.

  Just reply with the results.

• Windows could not update the Configuration to start the computer. Installation cannot continue.

  Trying to move from XP to Vista Ultimate.  During installation, the installation gets to 21% on the files and then closes and I get the error "Windows could not update the configuration to start the computer. Installation cannot continue.  Can someone help me with this?

  the problem has been fixed. I started on the dvd to see if I could install it outside of windows. I discovered that I could just install from windows. When I came out, I came across a repair button.  Who find startup errors and fixed them.  I then rebooted and went into windows and was able to install.

• Cannot start the computer in normal layout updated installation in loop.

  Original title: computer tower and all I get is install the 3de3 update, and it will not install or update.

  Recently, I had to have a video chip replaced on my HP dv - 7 1135r under Vista Home Premium. I took it to a mechanic and they said I need a new motherboard. I searched internet and found a company that could repair the motherboard. I sent the computer for them, and they sent back with the hard drive, cleaned. Well when I went to reload Vista program I inserted the wrong disk, and now the computer starts, but goes back to the screen where it says he is trying to load the update 3de3, it has run for a fewmins. and then stops, restarts and goes right back to the same screen! How can I erase new hard drive to reinstall the original program in Vista? It all started when I stop him and he had 3 udates to install, he installed 2 and when I restartedit was stuck o loadingupdate 3 about 3, and then he burned video chip.

  Hello

  I would suggest trying the following steps and check.

  Method 1:
  

  Step 1: start the computer in safe mode and check the status of the issue.
  Start your computer in safe mode.
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the computer works fine in safe mode, restore the system to a system restore point when the computer was working fine.
  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  You can also try to restore the system into Windows Recovery mode.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Method 2:

  If you are not able to boot normally to the desktop, then you can follow the steps in this link to make a tool to restart or system restore booting from the full version of Vista disc to boot up to the desktop:

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7.

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
   
  http://support.Microsoft.com/kb/94958

• Error Windows update cannot currently check the updates because the service is not running, you must start the computer, windows update services does not

  Original title: Windows Update service is not running / working and is not listed in services.msc

  When I go to windows update a red shield with a white cross appears and when I click search for updates this message appears:

  "Windows update cannot currently check updates because the service does not work, you will need to start the computer"

  * Restared several times-nothing has changed

  Despite what other threads have advised to:

  I checked in the services and WINDOWS UPDATE, Background Intelligent Transfer Service or encryption services are not listed!

   

  * I have changed the settings to "Never search updates" and then back to "install updates automatically" - nothing has changed

  * I ran the Malicious Software Removal Tool http://www.microsoft.com/security/pc-security/malware-removal.aspx- we say that everything was ok, but I can't always verify updates

  * I ran the download to reset windows update components http://support.microsoft.com/kb/971058/en-us but still I can not check updates

  (Nothing is in the update history)

  Am really worried!

  Thank you!

  Hello

  
  Have you made changes on the computer before this problem?
  Method 1:
  You can try to start the fix - it and check. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 2:
   
  You can read the following article.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.

  Method 3:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

• When start the computer can be turned on but nothing happens

  Original title: computer does not start

  Hi all

  Have a dual processor Intel running Vista with 2 GB of memory.

  When start the computer can be turned on but nothing happens. That is the screen is not lighting, brief flashes KB on and nothing. I hae take the drive HARD case and implemented it is powered, but there is no sign that it is accessed at all when the machine is running. It seems that ot could be the HARD drive, but I think that there is a rom on the motherboard, which is accessible in the boot process and I wonder if this could fail. I don't have a spare drive to test what happens then is anyway I can be sure if I need new hard drive or m/Board?

  While on the question - if I need a HARD drive, Vista is the one that crashed and I do not have a Cd with the machine when I bought it. Nor has created a cover of one! I have an old XP Pro upgrade disc and an original copy of Windows 2000 (so I can switch to XP). This is my best option? I can't afford £ 140 for Windows 7.

  Hi Eddie,.

  Since this is a hardware problem, you should contact your computer manufacturer or a hardware technician to understand the defective material.

  And also, since Windows Vista was preinstalled on the computer you must consult the manufacturer of the computer for resettlement or a recovery DVD.  Also survey about data recovery on hard drive crashed.