start-up problems for my pc

Similar Questions

• I have problem watching video on youtube it will start and play for 10 sec and stop

  When you try to watch a video on youtube or another network, it will start to play for about 10 to 45 sec and stop to let to memory buffer for hours custom go no where

  Click on the gear in the top right, symbol

  Point to security, and what is checked, uncheck the box
  Then click on internet options,
  Go to the Advanced section and check the box at the top of the page,
  Use rendering software instead of gpu rendering, apply and OK.
  Close and open a new window of ie9,
  Also make sure that your not using the 64-bit version of ie9, they are clearly identified and 64-bit operating system has two versions.

• connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  Best regards: John

  Hello

  -Do you have Bluetooth devices internal or external connected to the laptop?
  -Have you checked if all the Bluetooth drivers on two laptops are very well installed?
  -This work was fine before? If so, what are the hardware/software changes made on the computer before this problem started?
  -Is a problem only when these 2 laptops connecting or is that when you try to connect these 2 laptops at any other laptop too?

  I suggest you to go through these below items that could help you to fix this problem.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices
  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this information helps you!

• Start Menu problem - another file opens when I select a file to open in the start menu

  original title: Start Menu problem

  I use windows Vista Home Edition.  The start menu is in Vista Mode.  When I select a file the third file above that that I select opens.  In classic mode, it works fine.  How can I fix it?

  Hello

  Try the methods provided below and see if they help to resolve the issue.

  Method 1:

  This looks like a problem with Windows Aero, I would say that you update the card drivers video from the manufacturer's website and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  You can navigate on troubleshooting Aero:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero

• Start-up problems: Windows Vista

  My mother has a Sony Vaio VGN NR430E; a few months ago she started having problems with the start up. His laptop keeps restarting until it had a chance to take charge of the user. It allows you to choose different options such as safe mode and last good known configuration, just start to name a few, however is not a difference that one you choose because the end result is the same which is: it restarts; before you restart, you see a blue screen, but only in a fraction of a second and then it starts again. I want to format it, but she didn't burn the recovery disks. How would I be able to solve this problem?

  If no one responds to you:

  http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=1, 24,26,66,9,70,5,72

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can try this:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Pavilion dv6-3121: start/restart problem

  Hello everyone,

  Yesterday I installed the Intel PROSet/wireless software from the utility to update successfully, on my laptop computer hp laptop pavilion entertainment dv6-3121.

  After successful installation, I restarted my computer. Since then, my laptop could not start or start. It's just a black screen, saying basically "press ESC to continue."

  I tried the ESC pressed to continue, according to the statement, but nothing happened. The screen is always black.

  I contacted Intel, but they said I need to contact hp, to solve the problem. Help, please!

  I am furstrated and lost a lot of time to solve this problem.

  Thank you, adavance.

  Eze

  Hi @Ezedin,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Entertainment Notebook dv6-3121nr and issues with start/restart problem after downloading the software.

  Here is a link to put the laptop in Safe Mode. From there, you can uninstall the software that is causing this closure.

  If that doesn't help, you could return in safe mode and then you can do a System Restore. System Restore will help if something is automatically updated and do not go well on the Notebook.You may need to consider a day before the software has been downloaded and the question that's happened.

  Please let me know how it goes.

  Thank you.

• clean install of Vista on an old drive hard ide after drive failure hard sata - oem version now get "the limited functionality" due to "unauthorized changes" had no problems for 3 years until this!

  I did a clean install of vista on an old drive hard ide after the disk sata hard down - (oem version) now get "feature limited" because of the "unauthorized modification" had no problems for 3 years until this!

  Hello

  It's a shame you don't know the exact name of the virus

  Malware can cause non-genuine messages appear

  but try this:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• I had this problem for a few days now, everytime I turn on my computer, it immediately goes into recovery.

  OK, so I've had this problem for a few days now, everytime I turn on my computer, it immediately goes into recovery.

  It says: "Please choose an option:

  Start the repair Microsoft Windows environment

  Reinstall Windows

  Advanced options

  "Exit and restart the computer"

  I tried all the options, the demand for my keyboard and language input method, and then he says: "use recovery tools that can help solve the problems of Windows startup. Select an operating system to repair. If your operating system isn't listening, click Load Drivers and then install the drivers for your hard drives. »

  There is no operating system listed and when I click Load Drivers, everything that happens is a folder called "System32".

  There is another option, which is "Restore your computer using a system image you created earlier."

  This does not work either.

  So now the second option has two ways to sort, 'Start Windows System Restore' I tried before and now does not work. There are also "Start Full destructive recovery" which I also tried, but there passed the first hurdle, even if she says it should take 30 to 60 minutes.

  Advanced Options I can't use, because I'm not a user of advanced computing. It offers 3 options, although "Chkdsk", "Notepad" and "Command Prompt".

  Even when I put in the Windows 7 disc, it does nothing.

  This has all started after I had a few problems with the Sims 4 and since I changed my keyboard, but I don't know that could be the problem.

  Hello

  Thank you for the update.

  You can use the Bootrec.exe tool in the recovery Windows (WINRE) environment to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)

  • A boot sector

  • A Boot Configuration data (BCD) store

    Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

    
    Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  Let us know the results.

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• After pressing F2 when I enter setup it resets date August 20, 2009 12:00 am one here it shows also the bios: video bios with a shadow: obscured. What is a problem for me?

  Hello

  I have a dell studio 1558 laptop, core i5, 7(home premium), 64-bit, 4 GB ram operating system windows, I bought it in 2010.Now I get a poblem when starting after each time that I stopped him. It shows a msg for installation or recovery and after pressing F2 when I enter setup it resets date August 20, 2009 12:00 am one here it shows also the bios: video bios with a shadow: obscured. What is a problem for me? and why the date changes it self with the precedent1 every time at startup? How solveb this problem?

  Original title: shady BIOS, video bios with a shadow

  You must reset the default BIOS and change the BIOS utility setup time. In most cases, it will solve this problem.

  More information about the BIOS: http://www.dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=DSN_148562

  If this does not resolve the problem, I think that the main problem is the battery from motherboard or Ram problem.

  It is best if you go to the Dell service center and tell about this problem.

• Start PC problems & browser slow loading images

  I don't know if anyone can help, but my laptop has recently been very, very slowly with the internet when it comes to watching videos uploaded by friends on facebook or look a photos. Videos stream very badly, and the pictures to load very slowly. For this reason, I decided to restore the laptop to factory settings. Initially all seamed to be much better, but a few days later and the slow speeds returned. I now wonder if it's something to do with the recent series of Microsoft Updates, which just reinstalled again after my factory reset. Anyone with similar problems?

  I have a 1 year Acer Aspire 5733Z running under Windows 7 64-bit on Intel Pentium P6200, 4 GB DDR
  My preference goes to Google Chrome, but all browsers are the same, Chrome, IE, Firefox, all slow.
  I also experienced start-up problems turning on my laptop. He will try to turn it on and cut several times, maybe 20 times before arriving at the Windows start page. This just started to happen in August and was "healed" since my factory reset 3 days ago, but he did it again this morning, switching itself on & 2 or 3 times before you start.
  I am convinced that my problems were caused by the recent updates of August Microsoft Windows, because everything was ok until recently and was allowed after reset of my factory, until Windows fully updated itself again.

  Hello. Thank you for taking the time to provide this information. I did a full disk check and fix today, and things seem to be working ok at the moment. I don't know what exactly the disk check, if anything, and what would be purely coincidental. To answer your questions:

  1. I use Wireless internet connection.
  2. no changes were made to the computer before the original problem I can think. However, the problem, to some extent, continued after I did a factory reset and all updates reinstalled themselves. Immediately after the reset did improve things.
  3. If there is a problem with an update, I think maybe it's a .NET Framework 4 updates, that there were just a few which I will list below:
  KB2742595
  KB2468871
  KB2737019
  KB2789642
  KB2840628
  KB2729449
  KB2604121
  KB2804576
  KB2656351
  KB2835393
  KB2533523
  KB2600217
  KB2836939
  KB2468871
  KB2729449
  KB2604121
  KB2533523
  I tried to uninstall all the to see if it would help, not realizing they would all settle down again with the computer, the automatic update value. If the problem persists or comes back, I'll try to do a process of elimination by performing some of your suggestions and/or uninstall the updates one by one.
  Thanks again.

• Uninstall problem for Adobe photoshop CS and image ready CS.

  HI, I'm running windows 7 ultimate problem with the uninstall Adobe Photoshop CS and CS image ready. When I try the uninstall from the Control Panel, it shows that uninstall Adobe Photoshop CS and image ready CS completed successfully. But it has not been uninstalled. After uninstalling, I restart the computer but it always in the programs and features. Please help me.

  You have an installation CD that can run the uninstaller for you?

  Removal of Windows process «»

  Insert the Adobe Photoshop CS2 CD in your computer's CD drive.

  1. start the removal process.

  As with installation, the first window that appears requires you to choose a language for the installer. After you select a language and click OK, the software license agreement appears. Read the software license agreement. If you agree, click on accept. If you click on decline, Setup will stop.

  Click on install Photoshop CS2 in the main installation screen, click on next to the Welcome screen.

  2 disassembly and repair.

  When Photoshop CS2 is already installed, you have the option to repair the current version, which solves any problem that may have the version installed, or you can remove the currently installed version. Click on delete and click Next. »

  Photoshop help / install/uninstall Photoshop CS2
  http://helpx.Adobe.com/Photoshop/KB/install-uninstall-Photoshop-CS2.html

  http://www.Google.com.au/search?q=uninstalling+problem+for+Adobe+Photoshop+CS&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & redir_esc = & ei = atJYUJKGJYiwiQfnr4HwDg

• Then click on the start menu appears for a split second then takes me to the Help menu

  * - Original title - start menu problem

  When I try to click on the start menu, the menu is displayed for a split second and then switches to the menu help.  Anyone can help with this problem?

  Hello

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  Press the windows key and check if that helps.

  On the keyboard, press CTRL + ESC to open the Start menu.

  Method 2.

  Start the computer in safe mode and check if that helps.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Method 3.

  Ry Tyour computer to start clean and control state if the same problem occurs. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 4.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 5.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Method 6.

  I would like to create a new user account and check if the problem still persists.

  Create a user account: http://windows.microsoft.com/en-IN/windows7/Create-a-user-account

  If the problem does not occur, you can transfer the files from the damaged to the new user account by using the article user account "difficulty a user profile is corrupted.

  Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Refer.

  Keyboard shortcuts for Windows: http://support.microsoft.com/kb/126449

  I hope this helps.

• [Windows 8.1] Limited Internet access + the dependency service or group was able to start the PROBLEM.

  So I have this problem for a long time . I can connect to the internet, but it says limited. It works perfectly fine but the computer says that I am not connected.  I don't know what are the causes that. Troubleshootin g can't find any problems. Also when I go to network and sharing Center , he said:

  Unknown

  The dependency service or group was able to start.

  Thank you: D-Patrick

  Please run a check of system files (SFC) & DISM if you're on win 7 or higher 
  
  
  All instructions are in our Wiki article below... If you have any questions please ask us.
  Check the file system (CFS) analysis and repair system files & DISM to fix things SFC cannot

• I dealt with this problem for months. Even hired a comp tech to fix it and still have the same question. There, nobody helping me?

  I dealt with this problem for months.  Even hired a comp tech to fix it and still have the same question.  I had my computer wiped and windows 7 and 8 then reinstalled by a professional.  This all started when I upgraded form 7 to 8.  After 7 to 8 my computer kept getting this error. . kept crashing.  He was supposed to be fixed and it still does the same thing. I was told then move to 8.1.  I have always the same coming error.  I'm not on computer.  IS THERE ANYONE WHO KNOWS HOW TO FIX THIS?  Someone who can explain to me step by step how to fix?  I've tried everything.  Error 0x0000005c [settings 000000000000800 0x000000000000000B x 0 0 x 0000000000000000 0 x 0000000000000000]

  Hello

  The upgrade to 8.1 was perhaps not the best thing to do...

  A lot of people are having problems with it also.

  If it is a desktop computer, have you checked the wall outlet and the plug on the back of the computer?

  Your point about starting the tone certainly as a power or a hard disk problem...

  The problem with you mouse pointer could be related to a feature called quick start...

  Your other problem also, perhaps... Try to turn it off and see if it helps...

  This feature works only when you make a STOP and then start.

  It is not perform a RESTART.

  Turn on or off...

  Go to the control panel... Power options, and then select choose the power what buttons on the left.

  Then select change settings that are currently unavailable near the top center of the screen...

  Lower on the window, uncheck the quick start.