Starting Point question the effect

Similar Questions

• Starting point in the slide show screen saver

  original title: screen saver

  SLIDE SHOW

  I have a slide show for my screensaver - is there a way to keep the slideshow rotation, rather than return to his moose start point? I guess what I want is an endless looping of images in the gallery when I have time... Thank you - as you can tell, I'm not good at this

  Isn't what you want eventually return for the first starting off of too - it if turns?  Do you really mean that's not displays ALL the pictures in the Gallery, but some subset and want to include the rest of them as well?  Or you're looking for a random show type who do rotate or flip at the start point, but continues to change totally randomly?

  I'm not sure that these options are possible, but I want to make sure I understand what you want before researching it.

  Thanks and good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Starting point of the CSA

  We are deploying CSA ver5.0 in our society. I read 2 books for Cisco Press but wanted to get an idea of what real companies use as their groups. We have all the windows, all Types of desktop computers, remote desktop or Mobile and CTA. Everyone thinks it is exaggerated or under the protection of a starting point?

  The only problem we encountered so far is that the IBM portable computer touchpad driver is detected as an untrusted root kit. If someone met what I'd like to hear about your solution. TAC still works with us on this to create an exception that works.

  Thank you

  Dvergau,

  I think it is maybe too kill to a pilot group. That is where I hope you intend to start. You want to import a little, you decide what is a little, then slowly adjust and Add. What I mean is that you need to adjust these rules that block the operation. Then add a little more political and other.

  Many people have several ways of doing things. Some suggest simply use the wizard for all, many will tell you to clone all groups and modify those that don't. Cloning is a pretty smart way to keep a reference point. Yet once again, I suggest you start small and build up to the reference level.

  Regarding the rootkit, it's tough. The only way to allow the rootkits are to use the wizard. The wizard will make the hashes and application and the exception. I found a similar problem with Symantec. Leaving me the only option to disable the notification, or to add hashes on the fly.

  Hope this helps, if you need just to all creation information and politics rule. I'll help you better than I can.

  Kind regards

  Christopher

• question the effectiveness, loop or brute force?

  Hey guys,.

  I consider not really myself to be a programmer, more like someone who has the possibility of falling through and make things work. I always try to improve my working methods.

  I thought this question the other day, and the option to select either option just came in a project working on im. When I ask this question, that I'm more interested in a general best practices context not really a context "I need this code runs as fast as possible."

  the problem I have is that I need to run a sub VI twice to access both engines on my robot, the command to access the first engine of the second engine is one of the other, IE. engine is 5 and engine control 2 is control 6. My first idea was to create a for loop and add the first engines offset to the index of the loop and execute the loop for two itterations.

  Then I had a colleague just look over my shoulder and ask why I have not just to create the sub vi twice and do not use the loop.

  I know that these accomplish the same thing but I like to try and better myself as I said above, what are the advantages and disadvantages of each method and is one favorite on the other?

  Thank you guys

  The user preference is certainly a part of it, but when it comes to 'best practices', using the loop seems the best option if only for the sake of extensibility. In case you plop the Subvi down twice, you'd have to wire an individual value of each. However, with a loop for example, you can programmatically create a table and feed it to the Subvi same as many times as you wanted. This would facilitate adding devices.

• Starting point for the signal clk sample

  I am currently trying to synchronize my PXI-7344 Controller with my hardware DAQ-PXI-6221. The devices are connected through 1050 PXI/SCXI chassis.

  I wrote a program on board pending a signal RTSI and then making a capture high speed. The data is buffered in memory and then transferred to the PC in chunks.

  To synchronize this data with my DAQ data, I want to export the sample clock in the RTSI bus. My question is: the sample clock start sending signals RTSI after that I prepared and booked the task (the sampling frequency is known) or these signals do not appear before you actually begin the task?

  In the latter case, it would be much easier to merge the data because the two devices were producing the same amount of samples.

  Concerning

  André

  Hello Andrew,.

  Clock signals are not exported through the RTSI bus, until the task starts unless the trigger is configured. In this case clock signals will not be sent until the start trigger is received.

• import problem ORA-01658: unable to create the STARTING point for the segment in your

  I created the above tablespace
  
  create tablespace SAMPLEDATA
  DataFile ' / u01/app/oracle/oradata/sample/sampledata01.dbf' size 50 M autoextend on next 10 M maxsize unlimited
  logging
  Local extended management
  segment space management auto
  Flashback on;
  
  create SAMPLE user identified by usrmringnew
  SAMPLEDATA default tablespace
  tablespace temporary temp;
  
  
  Import from 9 to 10r2
  
  IMP fromuser = touser = sample indexfile=/home/oracle/import/production/export/import_productionddl_20081007.log file=/home/oracle/import/production/export/production_export_20081007.dmp log=/home/oracle/import/production/export/production_import_20081007.log production system
  
  Unfortunately, it gives the error
  
  ORA-01658: unable to create the measure INITIAL segment in tablespace
  
  could someone kindly help me on this?
  
  Thank you very much!

  Hello

  As you can see, your data file specifications need to increase of 10 M, but your file system has only 3.7 M of available, that is why the server is unable to increase the size and you get this error message.

  Solution - you can use one of following:

  1. move the data file to a point of editing with sufficient space.
  2 - Add a new data file for the tablespace and host this data on a new mount point file with sufficient space.

  Published by: sanjayIndia on October 8, 2008 09:02

• Using the coordinates entered to set the starting point of a Tween

  Hello
  
  I have a movieclip 'pano_mc' that moves around through the movement of the mouse, there is a hotspot (hs1_mc) nested within it (which moves with the Pano_mc), I have a hs1_mc event delivery, once pressed allows me to get the x and y 'pano_mc' at the point of delivery, I need a way to use these x and y corodinates to set the starting point for the interpolation , on Pano_mc.
  
  Cannot use 'this' (as shown in the link above) that the event is on the hs1_mc and if I just use '_x' interpolation setting, it begins where the film is originally and not where it is when the delivery is executed, where I get the cordinates right here.
  
  
  var hotSpotTweenX:Tween = new Tween (pano_mc, "_x", mx.transitions.easing.Elastic.easeOut, 0, "400", 3, true);
  
  Is there a way to fill '_x' with the var newx:Number = stagePosition.x; who holds the accurate cordinate of the pano_mc at the time of the press...
  
  I need to be able to use the coordinates xy of the pano_mc captured by the delivery, to set the starting point of the interpolation which then tweens the movie at a predefined point... create an interpolation of seemless...
  
  
  Can anyone shed some light on this... Thanks in advance

  "_x" isn't the starting value. This is the property you're interpolation. your ' 0 'is the starting value and your '400' (which really shouldn't be in quotes) is the value of end to resolve your problem, use a variable instead of ' 0'.

• Need help with timing of the effect!

  Hello! I currently own Adobe CS5.5. I have not touched After Effects for awhile now, I would like to use an effect and be able to start and finish the effect whenever I want bascially, but I'm not sure on how to do because it simply works the effect through the entire video I'm editing. Help, please! Thank you!

  Easy-peasy!  Just set keyframes for the effect to animate properties.  The closest together set you keyframes in the timeline, change things faster.  You can drag the keyframe around, too.

• everytime I have start watching videos sreaming they all start as they should, but later, they get real slow and it the effects of the performanced spped PC

  everytime I have start watching videos sreaming they all start as they should, but later, they get real slow and it the effects of the performanced spped PC

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. what browser do you use?

  In response to the questions above could help us help you better. However, you check to see if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

• White screen at the Vista start up... only the mouse pointer, loading the driver freezes on crcdisk.sys loading, sfc/scannow does not work...

  Hello
  I don't know if this is the right place for this post... Sorry if it's not! I had looked online if anyone has the same problem to me, I found similar problems, but not the mine one (but if there is, can you please give me the link?).
  I have a DELL LATITUDE D830's with a dual boot (Ubuntu and Vista). When I run Vista I get the Windows logo and then a black screen with only the mouse pointer.
  Keyboard does not work. I can move the mouse, but can not select anything. No work of Ctr + Alt + Delete.
  I can just turn off the computer. At first I need to press F8 to choose something otherwise I get the black screen.
  If I reboot requesting the automatic restoration of the PC that he asks me the account and work only account is mine a (no administrator available). He then suggested to contact the administrator. I checked the error report and nothing is reported: the system works.
  I have no previous configuration to restore.
  I can access the command prompt. So I tried to write sfc/scannow. The answer is that to complete the process requires to restart the computer and make again sfc/scannow. I restart again, the new order, but I get the same answer...
  When I get the black screen, CPU is not disabled, because after a long time (about 2 hours) the computer restarts itself... If something happens even if I don't know what!

  The only thing I have not tried is to restore Vista from CD... I'm really afraid that this could remove the partition, or crash at startup I have, by removing access to Linux!

  I have a backup of all my files, so no matter if what I have to do to cancel my files, but what I really need is to keep Linux operating.

  So, if you have any suggestions... I'm not good at using the computer, so, please, a solution step by step be really appreciate it!
  Thank you very much

  Paola

  PS No peripherics are connected, the wireless is disabled

  Hi seymar,.

  I suggest that you run a tool to restart system on the computer and check if it works.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions. 4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  If the previous step fails then I suggest that you run CHKDSK on the computer to check if there are any errors on the hard drive.
  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions.
  4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click on the command prompt and type chkdsk command-line /f and wait until the scan is complete and later to restart the computer and check what is happening.

  For more information please visit the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Align to the left the text anchor point in After Effect

  Hello. Sorry if this question was very noovy, but I need left align multiple layers of text. So, I want to put my on board left the text anchor point. Because I need to be able to change the text and get the same effect, I would like to place the anchor point on the left edge by using an expression.
  

  I used something like
  

  x = 0;
  

  Y = this.sourceRectAt () .height/2;
  

  [X, Y]
  

  However, small, apparently random offset is throw me off. How can I align my text anchor point to the left edge?

  Thanks in advance!

  Yes... I created a font that has 0 left/right bearings, and it worked perfectly.

• How can I activate the scrolling of the effects? I get "to activate scrolling effects your page must use a unique fixed stopping point." How can I do this?

  I have tried several things to enable scrolling of the effects, however, I can't seem to make it work. I get the message ' to activate the effects of scroll your page should use a unique fixed stopping point. " How can I change this so that my tab scroller are available? It's my first week using Muse, so I am very familiar with the software.

  Thank you!

  Hello

  is that you have already looked at working on the site so please be sure 2 things to activate the effects of roll for the site.

  1. There is only a breakpoint in the page as shown in the screenshot below.

  

  2 right-click on the breakpoint bar and select 'Breakpoint properties' and select 'Fixed width' instead of liquid.

   

  In case you are starting from scratch then be sure to select 'Fixed width' at the time of the creation of the new site.

  

  Kind regards

  Vivek

• Fusion HCM createWorker (WebService) what is the format of the Effective Date of start?

  Hi people
  I use Fusion HCM WorkerServices exposed through web services and trying to add a worker and get the error (by Java Exception) HRC-HRC_DE_SRV_ESD_EED_NOT_SET. I understand that Fusion HCM webservice could a wrapper around PeopleSoft (I could be wrong), among other things, and Googling shows me how to set the date in PeopleSoft or its implementation.
  
  I would like to ask what is the format by default for the effective date of commencement and end be set via Webserice.  I tried different formats but without success.

  
  

  I use WorkerService. Worker, Version 2
  
  Any pointer, help would be greatly appreciated.

  
  

  Concerning

  
  

  
  

  A quick update, I've been able to resolve this error. The error was misleading and I couldn't find any documentation on this topic, if there was any. The work object (HCM Fusion SOAP webservice, 11.1.x) have another attribute that are mandatory (worker type, code of laws, etc.). Actual start/end date was not yet mandatory.

  Concerning

• Points not react properly, conflict with the effects of anchor roller?

  I am slowly building my site with Muse for my new business, I started a couple of months. I used the 'Influence' model as a framework and used scroll on each section for them effects turn out to overlap as the page scrolls.

  Unfortunately I can't get the anchor points to work, I have them positioned at the top of each section accordingly and them associated with the buttons on the top, but when you click it, the page scrolls where they are. I guess it's some kind of conflict between the effects of roll and anchors. If someone has any advice how it can be fixed it would be greatly appreciated!

  Try to check the position of the pins on the content, scroll with anchor should work if the content is well aligned with the anchor point.

  Thank you

  Sanjit

• Pencil tool not snapping at the starting point.

  Hello!

  I have worked with the pencil for a while now and it starts a bit to annoy me that it won't be a link to its starting point anymore.

  He used to have the same effects as the right pen tool? When you want to bind the endpoint to the starting point, it should be a circle.

  Is there someone who could help me, or just pencil tool does not work like that?

  Double-click the pencil tool, there is an option to close paths