Step 2 authentication on desktop

Similar Questions

• How the process in two steps of authentication does not work if you are not in an area of cellular service

  Outside cellular service areas, IS those who know how the two step aunthicatuon process works in an iPhone 6, using the operating system iOS 9.3.4?  Would a being completely locked out of their iphone and apple services until they could find themselves in a cell service area? Or can it be accessed by a public wifi? Who beg to differ on whether or not it is beneficial to use when you travel?

  I did a little research to see if all Apple items shed light...

  See "How it works" in the Apple ID - Apple Support for two-factor authentication - a time that a device is approved, he'll never ask again unless you perform one or more of several things to "break the connection.

  If I were you, I would spend it TURNED off if you fear that one of these things could happen while you might not be able to obtain the code by SMS

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

  I'm confused as to why Apple would use two different expressions for what seems to be the same:

  • "Two -authentication"- and
  • "Two -step".

  The above two articles begin with a statement like: [underlining is unique, "BOLD" is synonymous with]

  "Two-factor authentication is just an extra layer of security of your ID Apple aiming to sure you are the only person who can access to your account, even if someone knows your password."

  «The two-step verification is an additional security feature for your Apple which designed to prevent anyone to access or use your account, same ID is they know your password.»

  Maybe someone with more experience can shed some light on your question and MY confusion?

• How to configure my Apple Watch for step 2 authentication?

  Of this article, it is unclear how to activate my Apple Watch zu receive 2 step authentication codes. There are no settings on my Apple Watch iCloud, so how do I enable authentication step 2 on my Apple Watch?

  See this - configure your devices to use authentication to two factors - Apple Support. Note, you need to connect, go to settings to iCloud on each device you want active 2FA.

  On the Apple Watch, the only want to disconnect is by disconnecting completely off on the iPhone connected iCloud, and only then can you connect again through the app shows on your iPhone.

  Here is another article to help you with the process as well - http://9to5mac.com/2016/03/22/how-to-enable-two-factor-authentication-on-ios-9-a nd-os-x-el-capitan / #comments

  Hope that helps!

• authentication fails after adding Gmail like Exchange account with 2 steps of authentication

  Hi, I have recently updated my iPhone and had to set up my Gmail account on the mail again app. I did similar to what I have on my iPad-

  1 has created a new Exchange account, as far as I know, this is the only way to get new messages via push notifications

  2. registered in Google Web site security preferences, created a demand for specific password, copied this password to a page, you press 'Done' on the Google Web site

  3. back in the settings, entered this password, my gmail more hurry and complete in the email address field address

  4. in the additional settings page, entered my full gmail address in the field user name, the address in "m.google.com" in the host field and the arrival in a hurry.

  5. it is said that the account was added successfully, but when I open my mail application and go to the Exchange folder, it says "connection to the server failed.

  What I am doing wrong? Things have changed recently? The Gmail app is now the only way to receive push email notifications?

  The only reference I see to notifications for Gmail, speaks to the application, so I'd say it's the only way now.

  If you check the settings > mail, contacts, calendar > retrieve new data > Gmail... There is only Fetch and manual.

• Cannot scan to desktop or any location. Analysis is complete but not the last step.

  Everything works fine. I see the scan in the preview window. The window of the scanner said that analysis is complete. However, the final step in my computer desktop or any folder on my computer can't. The only thing that has changed is my recent update to the Maverick - MacBook Pro 0 X 10.9.2. Very frustrating. Any help would be greatly appreciated. Thank you!

  Hi ADHD.

  Thanks for getting back to me. Try the following steps, and then try to start a new search.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Remote Desktop connection abandons the connection permanently

  When I connect to my office with Remote Desktop constantly gives up the connection in a few minutes. I have Windows Vista. I heard there were problems with Vista and this program. Someone has the answer on how to fix this? I can connect with my Wired PC without any problem. Thank you!

  Hi Drifter5,

  Welcome to Windows Vista answers Forums!

  You can try the following steps and check if you can solve the problem.

  Here are a few possible causes of connection problems:

  The port of remote desktop can be blocked by a firewall.

  If you are using Windows Firewall, follow these steps:

  1. open the Windows Firewall by clicking the Start button, click Control Panel, clicking Security, and then clicking Windows Firewall.

  2. click allow a program through Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Select the Remote Desktop check box.

  If you are using another firewall, make sure that the port (usually port 3389) remote desktop is open.

  Remote connections might not be enabled on the remote computer. To resolve this problem:

  4. on the remote computer, click the Start button, right-click computerand then click Properties.

  5. in the left pane, click remote settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  6. under Remote Desktop, click allow the connection of computers running any version of remote desktop or allow the connection of computers running with NLA authentication remote desktop.

  7. click on OK.

  For more information, please visit the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/changing-remote-desktop-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  If you use a wireless connection, then try to configure Windows to manage your network connections.

  For more information, you can consult the following link:

  http://TechNet.Microsoft.com/en-us/library/cc505913.aspx

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Logo of Windows vista desktop on startup

  How can I remove the logo of 'Windiows Vista Starter' in my office?

  Hi Pao78,

  If you're talking about Windows Vista logo in the bottom right of the screen, follow these steps to remove it. It is called the desktop version or a watermark.

  1. Click Start and type regedit in the box start the search.
  In the results, right-click box on regedit and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue. It will open the registry editor.

  2. navigate to the registry key:
  "HKEY_CURRENT_USER\Control Panel\Desktop".

  3. click on the desktop; on the right pane, locate the DWORD "PaintDesktopVersion.
  4. right-click on it and select Edit.
  5 change the value to 0. Close the registry editor and restart the computer.

  -Value is equal to "0" deletes the Windows version of office.
  -Value is equal to '1' adds Windows version on the desktop.

  ================================================================================

  If the logo Windows Vista Starter is set as desktop wallpaper, follow the steps to change the desktop background.

  http://windowshelp.Microsoft.com/Windows/en-us/help/2959a6e9-4b0c-4e36-8d63-a15bd50b8f5f1033.mspx

  I hope that helps!

  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• Remote Desktop connection is missing in the accessories. How can I restore it?

  Somehow the option "Remote Desktop connection" is no thus longer present under "Accessories".  Is there an easy way to restore it?

  Hello

  You did changes to the computer before the show?

   
  Try the steps to add remote desktop connection in the accessories and you may also be a
  administrator to do these steps.
  a. go to the "C:\Windows\System32" folder and find the file 'mstsc.exe '.
  b. right-click on the file and select "create shortcut".
  c. place this shortcut to the "C:\Documents and Settings\All Users\Menu
  File Menu\Programs\Accessories\Communications.
  d. the system may ask to make this shortcut on the desktop. Click Yes, then simply
  cut the shortcut on the desktop, and paste in the Communications folder.
  e. rename the shortcut "Remote Desktop connection".

• Select the system desktop icons

  In Windows XP and Windows 7, I can choose which system icons appear on the desktop (Recycle Bin, etc.) by right clicking on the desktop or using customize in the control panel.

  How do I do this in Vista?

  Hello

  I suggest you try the following steps to customize your desktop and check if it helps.

  a. right-click on your desktop and click on personalize.

  b. click on Change desktop icons.

  c. now, select the icons you want to display on the Desktop Icon Settings window desktop.

  (d) to change the icon image: select the icon and click on the Change icon button and select the icon image and click Ok.

  Also, see the following Microsoft articles and check if that helps.

  The desktop (overview):

  http://Windows.Microsoft.com/en-us/Windows-Vista/the-desktop-overview#section_2

  Customizing the desktop: recommended links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/customizing-the-desktop-recommended-links

  Office tips and tricks:

  http://Windows.Microsoft.com/en-us/Windows-Vista/desktop-tips-and-tricks

  Show, hide, or resize desktop icons:

  http://Windows.Microsoft.com/en-us/Windows-Vista/show-hide-or-resize-desktop-icons

  Just reply back to us if it did not help.

• no desktop background and dcom shutdown and plug-and-play stop messages

  For about a month now, I have had no splash screen. I'll have to use the Task Manager to actually use my pc that is not too much a problem just annoying really, but then for the past days, windows has been close specifying a stop plug-and-play message or dcom. I went in administrative tools and services and tried to fix it but didn't work. I'm completely computer illiterate, so if someone can help please be understanding with your answer and use plain English please!

  Hi nikkianddave

  Have you installed new software until you have encountered the problem of funds? Since then, did you install any new updates MS or applications? Is updated your Anti Virus?

  Try these steps and check:

  Step 1: Perform a clean boot and see if the problem persists.

  Step 2: Try to start the DCOM Server process Launcher service & Plug-and-Play.

  Please follow the instructions below and the service that precedes the value Automatic.

  1) click the Start button and in the search box, type in: Services.msc

  2) press "Enter" to open the Services window.

  (3) find a list of related services above and verify the status and Startup Type.

  4) double-click the service to change the status of started and set the startup type to automatic.

  Step 3: For the desktop no problem you can try to set the default value for the parameter of the windows interface:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. How to back up and restore the registry in Windows

  In the Windows registry (open 'regedit') and go to:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\winlogon\

  Set variable "Shell" = "Explorer.exe" without the quotes.

  Also refer to:

  http://social.technet.Microsoft.com/forums/en-us/itprovistadesktopui/thread/638effda-C124-4920-80fd-6dbbab0880bf/

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Z10 GMAIL BlackBerry - Z10 forgotten password (authentication 2 not lit)

  Gmail (with 2 stages of authentication) erratic application password. I can go days with no problems, then have a day where it says the account GMail is invalid and I put in the password for specific times two or three devices so far. I disabled 2 steps of authentication for now see if that helps but would like to fix it. Vodafone say it's a google / gmail issue but not sure I believe that, given the problems I have had with the OS Z10 and the fact that the issue seems to appear a lot on the web, associated with the BB platform. Not seen any solution yet though.

  On the Z10, I am running OS 10.1.0.2312. on Vodafone.

  Hey Holden,

  You need to unlock your Gmail Captcha, which is a safety device implemented by them to prevent connections «bot» unauthrorized  You can unlock your Gmail Captcha to https://accounts.google.com/DisplayUnlockCaptcha then retest your Gmail account.

  Thank you.

• AS5300 - authorization without authentication

  Hello

  I would like to send requests for aaa authorization to an external Radius server.

  However, it seems that an authentication step is required before processing the authorization.

  When I use "none" authentication on a line configuration (see below), the AS5300 is not even send any request to the radius server. The authorization immediately process a situation of FAILURE...

  AAA new-model

  LOGINTTY AAA authentication login no
  radius of group AAA authorization exec LOGINTTY
  AAA - the id of the joint session

  line 1 120

  authentication of the connection LOGINTTY

  exec authorization LOGINTTY

  But if I set up a step of authentication (local, or ray or line...), then permission is properly treated after the success of the authentication.

  Is it not possible to configure aaa authorization without be requested a name of user and password on AS5300?

  Thank you for your help.

  Concerning

  RM

  Hello

  Authentication is an essential step prior to authorization.

  Ray has no separate process for authentication and authorization. It's all part of the same package.

  Authentication is therefore essential for authorization to occur.

  hope that helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that the complaint is resolved. Note the useful messages.

• How to create a shortcut to desktop on Windows 7, like I did in Windows XP?

  In XP Pro, I created a shortcut on the desktop and pinned it to the toolbar. He was terribly helpful because I had several shortcuts on my desktop I've used often throughout each day. If I could remember how I created the shortcut to the desktop in XP Pro I could figure out how do it again to 7, but which is perhaps where I'm stuck - I don't remember. Perhaps the first question is whether a shortcut on the desktop can be created and pinned to the toolbar in 7? So if it's possible, how do we? All suggestions, ideas and comments that all care to offer will be greatly appreciated. Thanks, K.

  Hi kthr.

  I see you want to create the shortcut on the desktop and pin it in the tool in windows 7. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. have you made changes on the computer recently?

  Method 1.

  Follow these steps to create a desktop shortcut.

  1 - click Start, point to programsand then right click on the program that you want to create the shortcut to.

  2 - Click on create a shortcut.

  Method 2.

  Follow this link for pin a program.

  Pin a program to the taskbar: http://windows.microsoft.com/en-US/windows7/Pin-a-program-to-the-taskbar

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• How can you put a vpn on the desktop shortcut

  Now to connect to a VPN, I have to click (1) - start (2) Panel-(3) networks and sharing - (4) to connect to a VPN - Select (5) VPN - Connect (6) - the log on screen will appear - Connect (7).

  No doubt I should be able to go directly to step 6 with a desktop shortcut.

  Ahhh, sorry for that. I'm not using my Windows 7 computer and #4 step has a different name.

  (1) start-(2) Panel-(3) networking and sharing-(4) change map settings

  Make a right or right click and drag a connection icon to create a shortcut.

• CC Desktop 1.8.0.447 installation corrupts db and app associations

  I attended 2014 Max this week and was very happy to come back to update the creative Cloud Desktop application and install all app updates. The first way, I tried to do was created hours of frustration and futility technical support calls. I started by clicking on the icon of the menu 'cloud' and install the 1.8.0.447 build.

  After you install the update, the applications in the application of CC Desktop tab presents you with a rotating wheel loading and only shows you one of the applications that are currently installed. There are several procedures that Adobe and other members of the forum have listed the previous builds that guide you through suggestions on how to remedy this. Some root causes like legacy CS5 install, etc., are not applicable. The important first step is to access your OOBE folder and remove the file opm.db (as part of these steps App will not open |) Wheels of progress turn continuously). Following this procedure has sent me on a path that has completely messed up my install Desktop CC.

  After the last step, then by restarting desktop CC, the applications Panel charge - with one major exception - all relationships between installed applications and think that CC Desktop is installed has disappeared. Not only is it recognizes correctly what is installed but there is apparently no way to re - associate within the app!

  I came to generally enjoy the desktop CC as a centralized application for updating all programs, it is an improvement of the more archaic the AAM update, which is always accessible from applications via help > updates. But I remember at the time where you used to have to download an installers run manually one at a time, so I'll take it.

  That said, this current iteration has crashed and burned, and the only solution after two interviews with Adobe technical support is «sorry,» that you will have to uninstall and reinstall everything This is NOT acceptable. Some of these applications have gobs of presets, plugins, settings, etc, and I can easily jump a day everything is up and running. As it is, I lost 6 + hours trying to get to the next step.

  My last attempt involved using a Time Machine backup and restore the following files (after the closure of all CC desktop applications). It's always a crap shoot because I can not restore all necessary files (although I think that I have now down), and there are 'invisible' files that could be missed. With that, I restored it:

  • < User folder > /users/ / Library/Application Support/Adobe/AAMUpdater /.
  • < User folder > /users/ / Library/Application Support/Adobe/AAMUpdaterInventory /.
  • < User folder > /users/ / Library/Application Support/Adobe/OOBE /.
  • < User folder > /users/ / Library/Application Support/Adobe/caps /.

  
  

  (hidden ~ / library)
  

  
  

  • ~/Library/application support/Adobe/AAMUpdater /.
  • ~/Library/application support/Adobe/OOBE /.

  After you restore these files, I restarted, and I see that my MAO appears at the top of the page system menu bar indicating that there are 16 updates (it's good!), and the CC desktop icon, when you click Watch there is an update (version indicated above).

  As this is the 3rd time that I did, what I call my point of branching - the last two attempts, both were followed by the installation of the new CC desktop application, which puts me exactly in the order listed above. White apps screen spinning. Then I delete the opm.db file, and we're stuck.

  Just for fun, I opened the application AAM, and is list all the updates for applications. And I have not yet updated the desktop application. I'm nervous for updating applications outside the application of clouds... but I plan to do that. Uninstalling the creative application of Cloud Desktop, reinstall with the new one and I was wondering if it will be picking up on the applications that are currently installed and the versions I am running.

  At this point, I expect to see if I have to:

  (a) uninstall CC desktop and download the latest installer and try it - would it be different just update?

  (b) run the updates for the most part, leave CC quiet Office and weather the storm until the next generation coming. Install the next version, even after, pick them up later (after all my updates) databases and run correctly?

  Thoughts are appreciated, thank you!

  Thank you
  Stephen

  * UPDATE *.

  Called support of Adobe for a 3rd time, and this time had someone who was willing to work with me on this. Since the past two times we used the option 'Install now' Creative Cloud Desktop for update application, which usually leads to failure, we have tried to dump the current installation and fresh start with the Desktop App. CC office uninstall removes all installed programs.

  Try this alternative method we:

  1. Uninstalled Créative Cloud Desktop application
  2. Restarted
  3. Downloaded and installed the latest version of Creative Cloud Desktop free Creative Cloud | Download the free trial version Adobe Creative Cloud
  4. Once she started, it took about 20 seconds for the synchronization upward with the applications that I have currently installed, but acknowledged that they were there and said there were updates!
  5. A ran all updates

  That's why I rarely take the first 'no' as an answer...

  I hope this helps someone else.

  Stephen