step pane layout custom pressing on Test DUT (F5)

Similar Questions

• post action step works only in mode 'Test DUT'

  Hello

  My main sequence has a list of steps, any file type of sequence.  I Specifies an action on each of them to skip to the end if the seq fails and if a flag is set:

  FileGlobals.StopOnFail == True & RunState.SequenceFailed == True

  I found that it only works if I run my test mode 'Test DUT'.  If I select ' run selected tests use Single Pass', then, he igonre this.

  This is how is he supposed to be?

  How can I solve this problem?

  Thank you

  Rafi

  TS4.1

  
  

• I'm trying to export a package layout custom in jpeg format of 3 photos that have been edited and arranged on a single printed page.  This was possible on LR4, but I just upgraded to LR6 and don't see how to do it?

  I'm trying to export a layout "custom package" as a single JPEG which consists of 3 photos that have been published and willing on a single printed page.  This was possible on LR4, but I just upgraded to LR6 and don't see how to do it?  Suggestions?

  It is still available in LR 6.  Exactly what did you do that you don't?  You may be using the wrong wording.  This is not a function of export; It's a "print to: JPEG File" in the print Module

  

• How to change the step of the custom action?

  Hi, I use Photoshop CC 2015 and I want to change the property of a single step in a custom action. A lot of people through the internet said that if you double-click on a step, you can change the properties. But when I do this, he plays just this step (not all the action, just that step). What is the right way?

  Specifically, I would like to change the properties of this step:

  

  I like to "Select the front layer WITH Make Invisible"

  Now when you choose Select layer front/rear, it ignores the invisible layers. I would like to go to the next layer, even if the layer is invisible. If anyone know the shortcut keyboard for that... then I will not need to change the step!

  
  Thank you!

  Hello, when you double click you can have an option to change if you have something like a fit, with parameters.

  In your case, I think you can fix record this step. First, make a copy of your action, just in case something is wrong and then:

  -first uncheck the check box for all the step after that you want to save again.

  -remove the step you need to register again;

  -Run your action on a single file. It stops at the last stage before the one you need to register again;

  -Click on the Begin record button in the Actions Panel;

  -make your step again with the options you need.

  -Click the button to Stop recording.

  -Check the checkbox for all the steps and action should be ready again.

• Adding a custom under the test Configuration profile

  In older versions of PS, if I added a custom format to test profile, it should be pinned to the Format menu to test (and the default profile).  That does not happen in PS CS6.

  Is there a specific place, I need to save profiles customized evidence so that they appear in the menu?

  I had no problem with it and is for me

  ~/Library/application support/Adobe / / color proofing.

  Where exactly have you saved the file?

  Could you provide a screenshot?

• Write the component layout customized JavaFX 2.0

  Hello
  
  How to write custom layout pane? What important methods of the parent class of component are?
  Are there examples in Internet?
  
  Thank you
  
  
  Makrem

  Hello

  Here is simple example how to do it. At the end of the post are a few links that should help you.

  package jfx2betatest;
  
  import javafx.collections.ObservableList;
  import javafx.geometry.HPos;
  import javafx.geometry.VPos;
  import javafx.scene.Node;
  import javafx.scene.layout.Region;
  
  public class DiagonalPane extends Region {
  
      // to be simple
      // u can add some methods to add nodes remove nodes etc
      @Override
      public ObservableList getChildren() {
          return super.getChildren();
      }
  
      @Override
      protected double computePrefWidth(double height) {
          // here calculate prefWidth
          // include padding
          return super.computePrefWidth(height);
      }
  
      @Override
      protected double computePrefHeight(double width) {
          // here calculate prefHeight
          // include padding and other stuff
          return super.computePrefHeight(width);
      }
  
      @Override
      protected void layoutChildren() {
          int i = 0;
          for (Node node : getChildren()) {
              layoutInArea(node, i, i, getWidth(), getHeight(), 0.0d, HPos.LEFT, VPos.TOP);
              i += 40;
          }
      }
  }
  

  Main class:

  package jfx2betatest;
  
  import javafx.application.Application;
  import javafx.scene.Group;
  import javafx.scene.Scene;
  import javafx.scene.paint.Color;
  import javafx.scene.shape.Rectangle;
  import javafx.stage.Stage;
  
  public class TestDiagonalPane extends Application {
  
      private Scene scene;
      private Group root;
  
      /**
       * @param args the command line arguments
       */
      public static void main(String[] args) {
          Application.launch(TestDiagonalPane.class, args);
      }
  
      @Override
      public void start(Stage primaryStage) throws Exception {
  
          root = new Group();
  
          DiagonalPane dp = new DiagonalPane();
          for (int i = 0; i < 10; i++) {
              Rectangle rect = new Rectangle(50, 50, Color.BLUE);
              rect.setStroke(Color.RED);
              rect.setStrokeWidth(2);
              dp.getChildren().add(rect);
          }
  
          root.getChildren().add(dp);
          scene = new Scene(root, 500, 500);
          primaryStage.setScene(scene);
          primaryStage.setTitle("DiagonalPane Test");
          primaryStage.centerOnScreen();
          primaryStage.setVisible(true);
      }
  }
  

  There are also positionInArea methods in the class of the region.
  Maybe someone will after more complex example.

  Links that may help you:

  http://download.Oracle.com/JavaFX/1.3/tutorials/flowers/layoutContainers.html
  http://download.Oracle.com/JavaFX/2.0/API/JavaFX/scene/layout/region.html-> see more implement custom layout section.

  It will be useful.

• What is the easiest way to add the "comment field" of each step of a sequence, in the test html report file?

  I use Teststand 3.0, and I would like to have the comment field of each step of my movie file teststand appearing in my html report file.

  I guess I'll have to change the model of teststand ReportGen_html, but I would like to have your opinion to do so in the most simple...

  I have already changed it the SequencialModel for other purposes, but the ReportGen_html seems to be much more complicated to change...

  Thanks in advance for your help (and sorry for the bad English)!

  I converted the wire quotes as an example to 3.0.

  The approach is quite similar to my suggestion with a difference: instead of using custom step types, the example uses substitutions of callback to copy the string.

  Norbert

• With the help of driver and comparator on cards PXI-6552 to test DUT Tristate

  A functiona test, I need to check that my DUT outputs are tristate at some point in time.

  Is it possible to use the generation pin electronics driver to drive a voltage of mid range (say 1.6V) and the electronic pin Acquisition window comparator search the tension considerably away from that level (Vil = 1.4V and HIV = 1.8V)?

  So far, the problem is that the WDT waveform format allows a unique nickname by pine and there is no alias indicating drive and compare the two.

  Maybe I have to set some attributes HSDIO who turn manually the drivers and then look for invalid data (between vile and HIV) during cycles when the DAE is tristate?

  Hi Brian,.

  Unfortunatelly the 6552 does not support the States 'lead and check '. The PIN every time he compares goes in three States. Perhaps the best solution would be to get the acquired data and to verify the State of the PIN to this particular sample. In this case, you define your waveform to drive a value and the acquisition will acquire what you are driving (or what's left of the signal). This can be problematic if you run complex scripts, because it is difficult to understand where in the waveforma which is particular State, but electrically measure is correct.

  Let me know if you have any other questions about this work around.

  Kind regards

  Juan Carlos

• custom digital limit test units

  Hello

  I did a test to limit step digital custum (TS 3.0, 8.2 LV). Normally with the stage of test AND numerical limit, step generates a variable unit in Locals.ResultList [x]. Units if a unit is registered. How can I do this with LV or where do I store the information of the unit (chains of research such as Step.Units or Step.Result.Units does not work).

  Hope you can help me.

  Schwede

  
  

• A layout custom reagent exportable HTML5 to HTML5 Multiscreen layouts?

  11 HR, I created a custom layout of Responsive HTML5. Now, however, I plan to change my project in HTML5 Multiscreen since marking content (using TCC) for output be does that for specific screen sizes is not supported in HTML5 sensitive layouts. Is there a way export my settings in custom HTML5 Multiscreen page layouts?

  Hello

  Sorry, but it's just not possible. You will need to edit carefully each of the Multiscreen patterns to accommodate changes in reactivity.

  I guess that it is some sort of 'catch' 22 of the situation. Reagents layouts are created because you intend to have the same identical content in all environments. Maybe a bit of reorganization based on breakpoints. The fact that you need a different content for different devices causes monkey wrench to be tossed into things!

  See you soon... Rick

• Step by step guide for custom legends

  Hello

  Does anyone know of a good guide to create captions for Captivate (using the V6)... If they need to be made in Photoshop or Flash, & tips on the best tool for the job... ?

  Cheeres

  Sabine

  Hi Sabine,.

  Perhaps I could find such a guide, but do you really need them since you are on 6? I've never use custom legends, replace them with Forms. There is so much easier to create, you have all kinds of possible control, on line, fills in the form of the characters, paragraphs, filling and you can move the "point" to the legends of the legend.  I always found so hard to create ancient legends and so strict rules. No need to Flash, a graphical editor is sufficiient but you must create different graphs 5 (without and with the points in the four directions), and each graph to set a CMF file for the padding. In the time it takes to create such a legend you can get at least 10 much better search forms (and save their style in the Style of the object manager for use).

  Sorry, this isn't a good answer to your question at all. I want to tell you that I have never created a custom legend after forms appeared in Captivate 6. Even for buttons custom...

  Lilybiri

• How can I retrieve the execution of TestStand 4.0 Test results in a c sharp Application?

  I am writing a c sharp application to launch a test sequence in TestStand 4.0.1 and then collect the results of the tests to update our own screens / report (s).  I'll need some sort of recursive routine to collect the following information (if available) for each stage: name, result, Min value, Max Value, measured value, units.

  My attempts have been to an event to end execution allows to collect data:

  void EndExecution (sender As object, EndExecutionEvent ev)
  {
  Results PropertyObject = ev.exec.ResultObject.GetPropertyObject ("ResultList", 0);

  int numContainers = Results.GetNumElements ();

  for (int i = 0; i)< numcontainers;="">
  {
  PropertyObject resultData = results. GetPropertyObjectByOffset (i, 0);
  String testResult = resultData.GetValString ("Status", 0). ToString();

  PropertyObject testStep = resultData.GetPropertyObject ("TS", 0);
  Dim testName = testStep.GetValString ("StepName", 0). ToString();

  MessageBox.Show (i.ToString () + "". "") testName + "=" + testResult);
  }
  }

  But this only gives me MainSequence data.

  How to cross the ResultsList tree to access the results of all the test steps?

  tlaford,

  There are a couple of big problems with what you are doing:

  (1) it is best to call the code from a test report of the result of your sequence treatment reminder (just use an action step) or change the process template to call your code rather than to call for EndExecutionEventHandler of the user interface, because if you use Test DUT and then there is a separate resultlist by USE not by execution, and it is generally processed at the end of each use not at the end of execution. If you use the EndExecutionEventHandler then you should NOT use the process templates provided with TestStand because they don't work that way. Instead, you just run your sequences without a process template. Although I really recommend the path of process model, even if you write your own a custom, because it is more flexible, and then hardcode your treatment result in the user interface as you do. A few reasons why a process model is that more flexible or better are that it will work in any user interface, including the sequence editor (no changes to the user interface is needed), and it can do everything you can do in a sequence, for example to call a code module in any language supported , asynchronous sequences, call sous-séquences, etc.

  2 recursion) through each property at such a low level is bad because the names of the properties are not guaranteed to be unique for what you expect them to be. Anyone can write their own types step custom with some result properties that they would like. You must make sure that the full path to the properties is what you expect it, and you can even check that the type of step is one you expect. You should rather loop through the result of higher level items ONLY and are looking for the complete data lookupstrings that you expect from these elements. For example, instead of WalkTree you might have the following instead:

  This must be called from a step in a test recall report or in a custom process template
  rather than from EndExecutionEventHandler of the user interface, because if you use Test DUT then
  There is a separate resultlist by USE, not by execution, and it is usually processed
  at the end of each use not at the end of execution.
  Sub ProcessResultList (PropertyObject resultList)
  {
  	numElements int = resultList.GetNumElements ();
  	< numelements;="">
  	{
  		Element PropertyObject = resultList.GetPropertyObjectByOffset (i, 0);
  		String stepTypeName = string. Empty;
  If (point. There are ("TS. ((StepType', 0))
  			stepTypeName = GetValString ("TS. (StepType", 0);
  If (stepTypeName is "NumericLimitTest")
  		{
  			If (point. Exists ("Limits.High", 0))
  			{
  				 Double highLimit = item. GetValNumber ("Limits.High", 0);
  				 Do something with the value
  			}
  		}

  NOTE: The two step type SequenceCall and NI_Wait can have subresults like that. A stage of waiting waiting on an asynchronous thread or the execution will have this.
  If (point. There are ("TS. ((SequenceCall.ResultList', 0))
  {
  Recurse for results call sequence.
  PropertyObject sequenceCallResultList = item. GetPropertyObject ("TS. (SequenceCall.ResultList', 0);
  ProcessResultList (sequenceCallResultList);
  }
  }
  }

  Hope this helps to clear things up,

  -Doug

• Nedopil part of sequence to run once in test USE

  Hello

  I use 1 file encoding to run tests on a number of different types of products.

  Right now I use a message box to the user to select the product under test and based on the return of the message box, I select the correct limits to laod with the shipper of the property.

  My problem is that I don't want to see this message every time a device box is test using test DUT. (only on the forst to run)

  Can someone please adivse the best approach to deal with this case.

  PS: I want to stay away from change my IO, I want to enter in the case of having customized OIs for different test sequences.

  Kind regards

  Don1.

  Hello

  To try to make my suggestion:

  1. open your movie file in the editor of Teststand.

  2 Select the pull-down Edit menu, select the sequence Callbacks... file option.

  This should display a new dialog box display the available callbacks associated with the process in use template.

  3. in the new dialog box select/highlite the recall of PreUUTLoop , and select Add.

  This should add a new subsequence to your sequence called PreUUTLoop file.

  Close the new dialog box.

  4. open / select the new PreUUTLoop under sequence in your movie file.

  Insert a new type of Message Popup enter group main step, add a simple text just to try the idea.

  5. run your movie file. The simple text you entered to appear as a Message Popup dialogue

  box, just once, before entering the test loop.

  6. If it works for you, replace step Message Popup with your steps that get user information.

  Kind regards

  Gary.

• The model resource management lots with the flexibility to order step

  Hey, the people of Teststand.  What is the best way in 2014 Teststand to do this?  I'll implement test DUT 4 in parallel using the model of batch processing.  The test sequence is in two parts.  2 DUT at a time can run part 1.  While 2 DUT are testing part 1, I want to than the other 2 DUT to test of part 2.  Then when they are done part 2, wait for part 1 slots become available and then run part 1.  And these DUT who had run part 1 all first then work part 2.

  Thank you.   -Joe

  Joe Czapski

  Sonos

  Boston, Massachusetts (United States)

  As I understand it, a step of the automatic planning to the next level would be perfect for this:

  Automatic calendar

  Use Auto demand resources ("Part 1 - Slot 1", "Part 1 - Slot 2") / / these are two variants different resources
  steps that part 1. Use the acquired lock output if you need to know what slot

  End

  Use Auto demand resources ('part 2 - Slot 1', 'Part 2 - Slot 2') / / these are two variants different resources

  steps that part 2. Use the acquired lock output if you need to know what slot

  End

  End

• Example of test bench for several elements of e/s FPGA

  Hello

  I'm looking for an example on the creation of a test bench that simulates multiple FPGA of e/s digital lines.

  I went through the tutorial of creation of test benches, but it uses only a single element of I/O.  E/s reading Point Name.vi is obviously an important part of this but I don't know how to structure the VI and assign the name (especially since things seem to get wired upward as if by magic of a single element of IO).

  Pointers to examples would be greatly appreciated.

  Thank you

  Steve

  Hi Steve,.

  Do you mean multiple channels or multiple signals for each channel?  In the tutorial, you have published, you can find the answer for each.

  To create multiple channels, just repeat steps 5 to 9 in section 'Test the FPGA VI on it development with a Custom VI' for your entries and steps 5-7 on the 'Testing out the i/o Item' for outings.

  To create multiple test samples for one channel, you can consult the section "Testing the FPGA VI with a more complex Custom VI".

  Best,