(Still fairly new) HP Pavilion Desktop PC beeps and there is no screen

Similar Questions

• poor wireless signal from the router to the new hp pavilion desktop computer

  getting poor signal wireless to the router to the new hp pavilion desktop computer. router 10 feet away. Help!

  Wireless router works fine for the 3 most old cell phones in the office.

  I heard that desktop computers receive wireless signals, but also laptops.  Is there a solution out there for this situation, in that I am?

  Thank you

  Roland

  whatifu wrote:

  A geek at Best Buy told me to open the box and put a few sheets of Tin around the antenna inside. What do you think?

  Roland

  Hello

  Also my suggestion BUT you need to do, of course, don't let touch to the Platinum

  All the best,

• P7-1534 HP pavilion desktop PC, stop and sleep problem

  P7-1534 HP pavilion desktop PC, Windows 8, 64 - bit, sometimes when I turned off my PC, the PC does will not off it stays on and I have to use the power button to turn off the PC and today I put the PC to sleep and he did not wake up when I tried to wake up that I had to use the reboot of the PC power button. I did a diagnosis of memory and found no errors.

  Hi dwellas

  I understand that you are having problems with the computer is shut down and not being able to wake up.

  You can have an application or process that runs in the background that not stop correctly. Close all applications on the status bar that you can, make sure you first close all programs, and then try again. If this works, you should see what you have installed which can be the cause of this.

• HP Pavilion 750n just beeps and the LED stays on

  My Hp Pavilion was Saturday and now it just beeps every 2 seconds and spanning the LEDs and it never stops. And there is no video on the monitor. Can someone help me?

  A glance to discover that it was the motherboard...

• Unwanted startup desktop bigger icons and rearrange to fit screen

  I want to block the display of my previously chosen icon size and arrangement on the screen.

  Hello

  Log on as an administrator and set the icons as you want.

  These should help you to do:

  Difficulty for the desktop icons set in not getting saved after restarting Windows
  http://www.Winhelponline.com/blog/fix-desktop-icons-layout-not-saved-restart/

  ---------------------------------------------

  Save and restore the desktop icon layout in Windows NT/2000/XP/Vista
  http://www.Winhelponline.com/blog/save-and-restore-desktop-icon-layout/

  Save and restore the desktop icon Layout in Windows Vista - free
  http://www.howtogeek.com/HOWTO/Windows-Vista/save-and-restore-desktop-icon-layout-in-Windows-Vista/

  TIP : right click on desktop - DISPLAY - uncheck AutoArrange and snap to grid when you want to restore the icons
  or restoring won't work. You can re - check those as needed later and apply the Align attribute on the grid before the
  Auto arrange.

  -------------

  Office catering - free
  http://www.MIDIOX.com/

  Info
  http://www.MIDIOX.com/HTML/desktop.htm

  --------------------

  Lock the post Office icons and disable right click
  http://www.techmynd.com/lock-desktop-icons-position-and-disable-right-click/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My new HP Pavilion Desktop PC has no option for my old Canon Pixma iP 2600 printer usb connection

  Greetings:

  I can locate is no longer the installation disc for my my old Canon Pixma iP 2600 printer.  I am able to install it w / add it as a printer in the Control Panel, but the Office feature fails to read that the printer is connected via the usb cord.  I'm not find no possibility to install it as a usb printer.  Please help as soon as possible.  I can't afford to replace the printer and I have several documents that I need to print today or early tomorrow, or there will be dire financial complications for me.  I NEVER had that problem w/Dell.  (the operating system is windows 7, which is exactly what I was running on my old dell model - I searched this forum and find a similar question, but that the consultant has been able to find a usb option in the drop down menu to the port facility.)  that option is absent in my attempts).

  Thank you!

  Interestingly, I discovered (after wasting a ton of time online and on the phone w/less useful HP tech) that the problem was in the two faulty usb ports on the front of this new processor.  at this point, I plan to return to the model of costco and return to dell.  Thank you for your help.

• Help! installed new motherboard Pavilion HP G6 laptop and now having battery problems

  I have a G6 pavilion with a new motherboard that works very well until I have unplug and he turned off the light on the battery or the power led on the right side next to the power connector remains solid when powerd completely out of what may cause this problem? The battery is also not appearing not but fresh. If someone could help me, it would be greatly appreciated thanks.

  I understand the motherboard was replaced, and now there is a battery problem.

  You have already bought a new battery, which seems to exclude from the battery as the source of the problem.

  Was it a real or a third party battery?

  What was the initial question that lead to the replacement of the motherboard?

  The replacement motherboard came with a guarantee?  To be honest, it sounds like a problem with the motherboard because it was not present before the change of motherboard.

• HP Pavilion DV9600US video hangs and get the blue screen of death, hardware video message fails

  If this can help others! I have a HP DV9600US it works well but then screen freezes hot flashes and crashes or re-boots or gives me the blue screen of death. Spent hours updating the drivers and the latest NVIDIA drivers without change, all the tests and diagnosis appear normal. When I open IE 9 it hangs then crashes sometimes at the office, tried to change the parameters of res and nothing has worked. I assumed I had a bad video chip. NOT. This all started I thought with IE 9, I changed all the settings of Internet Explorer.

  Here's what I found to solve the problem and I hope this can help, DO NOT updating auto or manual for the new drivers or NVIDA video Windows CE is the cause, I downloaded from the site to shape the 2008 NVIDIA driver HP and rolled, problem solved. I am running Windows Vista 32 bit.

  I post that hope, it helps others and records the days/hours of attachment and not update recommended to the latest drivers that actually caused the problem in the first place. I guess the lesson learned if it works LEAVE IT ALONE.

  Good luck

  Please mark as resolved so other users can see this theard includes a fix for the problem

• HP Pavilion desktop computer - 550-166d: could not find a desktop computer HP Pavilion - 550-166d burner software

  I was unable to find the burning software for my new HP Pavilion Desktop PC - 550-166d. May I know that this model does not comes with the burner software? I try to find in the recovery software, but could not.

  So, I download software Cyberlink Power2Go:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob-140777-1#tab3

  "However a pop-up message: this software cannot be installed on a Hewlett-Packard system".

  No reason?

  Is there any burning software can be installed in my pc?

  Hello:

  I'm surprised that the software did not work.

  See if this version works...

  This package provides CyberLink Power2Go in the supported models running a supported operating system. CyberLink Power2Go is a burning software that allows users to burn data, music or video disks. It offers support for CD, DVD, HD DVD and Blu - ray discs and includes features for disk copy.

  FTP://ftp.HP.com/pub/SoftPaq/sp75001-75500/sp75302.exe

  If that doesn't work either, I like this free software... I install the version without open candy.

  https://www.CDBurnerXP.se/en/download

  The specifications of product software for your model, indicates that it does not come with any software CD/DVD burning.

  http://support.HP.com/us-en/product/HP-Pavilion-550-100-desktop-PC-series/8499648/model/9639726/document/c04915775/

• Desktop HP Pavilion h8-1150z: desktop HP Pavilion h8-1150z - 6 beeps and no start

  My Home Office HP Pavilion (Pav HP h8-1150z AMD (Angelica) 3 c NAPC) is about 3 and a half years (and apparently 6 months past my HP Care Pack coverage extension).   It runs Windows 7.  Yesterday while the computer was not idle, he began to make a new sound of snoring (a bit like a fan noise).  So I stopped the machine.

  Now, when you try to restart, it gives 6 beeps and goes no further.  It's always a little strange noise of snoring.  After my research, it looks like it's some pre video failure.

  I tried to remove the graphics card and re-sitting there.  While I had the video card, I tried to restart.  The sound of snoring had gone, but still have the 6 beeps.  While the Office has been opened, I also reinstall memory and blew out the dust.  Still no luck.

  I've seen a few suggestions to clear CMOS but don't know what I would need to do it with this machine.  I unplug the machine and press down the power button for several seconds to erase any residual power.

  Any suggestions/recommendations?  If it looks like my graphics card has gone bad, any suggestions on how to buy a compatible replacement?

  Thank you.

  old_geekster,

  I talked to Support PNY and they agreed that the graphics card, I bought should be compatible but does not appear (maybe because I was running an old version of the bios on the HP computer, but I found myself stuck in being not able to update).

  So I ended up finding another graphics card (EVGA GeForce 8400 GS 1 GB DDR3 PCIe 2.0 graphics card 16 x) and that did the trick!  Once I have installed the new card I was back running.

  Thank you once again for all the help you have provided me and your community support!

• How to connect my LaserJet 4500 to USB on new HP Pavilion Elite desktop 9517

  I have a new desktop Pavilion Elite M9517-c and you want to continue to use my hp laserJet 4500 color laser printer that has no USB connectivity.  Can you recommend a printer with a USB cable so that I can connect these two? Is this possible?  The printer is in great shape! Thanks for your response in advance

  My God, you're right it isn't the adapter, you need, sorry, here check this link

  http://www.emtcompany.com/catagories/USB-to-parallel-adapters.htm?gclid=CISz2-n2m5kCFRwDagodTU5aCw or

  This one

  http://www.cablewholesale.com/cgi-bin/googletrack.cgi?URL=/catalog/usbadaptors.htm&gclid=CKSK9qP3m5kCFSMSagodPAaICw

• I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive.  What can I do to fix this problem?

  I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive.  What can I do to fix this problem?

  Hi edwards39572619 ,

  Please visit this link to download Acrobat 9 Pro:-download Acrobat 8 and Acrobat 9

  Let me know how it goes.

  Kind regards

  Christian

• I downloaded LR6 to a new HP Pavilion computer and when I try to change in developing all I get is a blue screen. Photos are .dng when I click on the before / after button, I get a partial view of the picture and the part is still the blue light in the re

  I downloaded LR6 to a new computer HP Pavilion. 10 windows and when I try to change in developing all that I get is a blue screen. Photos are .dng but when I click on the before / after button, I get a partial view of the picture and the part is still the blue light in the rear section. When in the module library, photography is able to be seen, but as soon as I click on the development, I see a flash of the photo and then the screen is all blue where I would like to see the photo. I opened both the old and the new computer and against each element and they are identical with the exception of the blue screen. I wonder if it has something to do with the magnifying glass?

  Go in Edition > Preferences > Performance and uncheck CPU graph use.

• HP Pavilion Desktop extremely slow 8.1 Windows running, the computer is new

  My new computer Pavilion was purchased at Office Depot. It has Windows 8.1. Office Depot has transferred the files from the old computer to this one. It has not used properly as we have implemented. It freezes after every keystroke and then said the program is not responding. It is impossible to use Ebay, facebook, Amazon, etc.

  Joconna, welcome to the forum.

  Frankly, I take it back to Office Depot and make repair.  It seems to me like there was a little problem when the files have been transferred.  I can tell you to run Win 8.1for more than a year, I don't think that it is hardware related.

  Your only other option is to do a system restore to see if that helps.

  For future use, when the application for aid, you must always include the make and model (e.g., p6-xxxx) of the computer or the monitor. This information is necessary for us to review the specifications for them.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Pavilion DV7-2015tx adapter beep and not charging.

  I desperately need help. I have a pavilion laptop Dv7-2015tx computer and my adapter is beeping and refusing to load. My battery recently failed, and so I can't turn on my laptop. I tried a hard reset, I tried to leave it unplugged for an hour and even shaking autour as suggested by some people on some forums as a solution. The light on the adapter is not on, and this problem has happened 2 times before, both times, the adapter has continued to work after about an hour to be disconnected. This time he didn't. I contacted HP telephone support, but they said that I was going to post a MASSIVE $33 phone support because it was out of warranty. I can't find an answer on this forum and want to be able to find a solution without having to buy another card. Before this problem, my laptop was turned off for a day and a night while being plugged. I desperately need help, please answer from HP.

  I'm certainly not under warranty, but I have a solution anyway. I called HP customer care again and this time I was told that it is a good, hard to solve the problem. The only solution is a new adapter, but I found a new on for under $ $20 on eBay still we made a simple diagnosis, for example, by ensuring that it was still beeps when it is plugged into the wall but not the laptop, and the fire was still out. I'm still bummed that I have to wait for delivery, but my laptop needs to go in a factory repair for a noisy fan problem, and also a radiator problem that caused my laptop to get up to 70 degrees, so it's a good time to wait.