Stop the Airplay due to the device (iPad)
I connected two Airport Express (the kind that plug directly into the wall jack) speakers. Both are extensions of my Time Capsule. The two have different names. From my iPad, I can choose either choose one with Airplay and plays music with one I have no problem. Is how I use it, I play a piece, then close the lid (turning off the iPad). 10 minutes later, perhaps, I open it again and you want to play another track through the same speaker, but Airplay failed to the iPad. Grrr. iTunes on my Mac seems to remember every day. How can I get the iPad to remember the choice Airplay?
Edit: Sorry, not the type that plug into the wall. The square box type.
Tags: Wireless
Similar Questions
-
iCloud watch icon pays next to the device iPad Air 2. I've already paid to increase the storage size, but my iPad is not synchronizing. My iPhoneis showing the right amount of photos and I'm not having any problems with it. Recommendations on adjustment or the w parameter
Try the settings/iCloud and remove the synchronization. Wait a few minutes and then resynchronize.
Have you tried the signature to iCloud and then reconnect?
-
After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Then lets refresh the USB stack
Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
all except the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and the method of Vista is identical
http://support.Microsoft.com/kb/310575----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problems------------------------------------------------------------------------------------------
If no joy, see Toshiba Support and/or their forums:
Toshiba support and drivers
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba Support Forums
http://laptopforums.Toshiba.com/Contact Toshiba
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactI hope this helps and happy holidays!
Rob - bicycle - Mark Twain said it is good. -
Windows has stopped the device because it has reported problems. Code 43. Something with the generic bluetooth adapter. What should do?
Original title: Please help
Hi JovanaNesic,
One of the motors controlling the unit notified the operating system that the device has failed in some way.
Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.
Follow the link below a convenience store opened.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
If you have already run the Troubleshooting Wizard, you can view the documentation for the hardware for more information about diagnosing the problem.
-
A usb driver for microsoft
Windows has stopped the device because it has reported problems (Code 43) Standard USB HOST Controller, location of port #0002 Hub_ #0005
Right click on desktop, select Properties. On the next page, top left click on Device Manager.
Scroll down the page until you come to the Universal Serial Bus Controllers and double click on this.
Uninstall ALL USB host controllers. (Remember that when you have finished the last of them, your keyboard and mouse may not work!) Restart the PC. Windows should then pick up the controllers & install the correct drivers. The only time where it will not install the drivers is when the USB host controllers are physically damaged. In this case, the fastest and cheapest method is to buy a USB PCI card which fits directly into a PCI slot on your motherboard and will come with three or four USB 2.0 ports.
-
No preview on the device (ipad)
Hello. Since 2 days I can't get a glimpse of my folios on my ipad. I can see them on the line, but local (connected with the mac ipad).
I tried 3 different Macs, 2 snow leopard and 1 lion but the problem is the same on each computer.
CS6 inDesign, ipad 2, Macpro (snow leopard), Macbookpro (lion)
No idea what's going on? All help is welcome.
Jacques
It is a known problem. Please see the ad at the top of the forum or http://status.adobedps.com/
Neil
-
Original title: ejection of mass storage device problem...
receive error message windows adv that he can't not stop due generic F program still Manager... tried running tasks and nothing show... while using the drive toshiba external hard... clues?
Hello
This problem may occur ago open with all the files in the USB mass storage device, the handles are in use by another program.
I suggest to refer to the article and perform the steps mentioned there.
Note: The steps mentioned in the article are also applicable for the Windows Vista operating system.
Problem ejecting USB storage device: http://support.Microsoft.com/kb/555665
Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.
-
Impossible to get an overview on the device (iPad)
Hello
I followed the steps as described in the help to get a glimpse of a folio directly on the iPad, but I have only the desktop Preview in the menu dropdow.
Here is what I tried:
1 phone drive was launched before the InDesign connection and set to Viewer Adobe root
2. on the iPad, I launched a custom application built with v18.
3. when I launch InDesign, drop-down the menu preview shows only the desktop preview
My Panel folio version is 7.0.5.18.
What's not?
Thanks for your help.
I did not build the custom Viewer...
Now it works
-
Original title: Windows Update stopped working Vista Home Basic.
HP laptop 550 Vista home basic 32-bit. Windows Update stopped working, also adapter display Windows stopped the device says it has reported problems (code 43). I uninstalled / reinstalled the drivers, but not make any difference. Thanks for any help.
Hello
Question: Windows Update has stopped working
1. do you get an error message when you try to update?
2. were there any changes (hardware or software) to the computer before the show?
Perform the steps from the link below.
The problems with the installation of updates (Windows Vista)
Question: display Error Code 43 adapter has stopped the unit
Run the Fixit and check if it helps.
Hardware devices do not work or are not detected in Windows (Fixit)
Hope this information helps.
-
Stop the transfer of my iPad to my 6s iPhone apps
How to stop the transfer of my iPad on my iPhone apps?
Apps do not transfer from one device to another. If your iPad apps download on your iPhone, turn off automatic downloads in settings > iTunes & App Store > Automtaic downloads > Applications > Off.
IF your iPad apps sync your iPhone on iTunes, click on remove in the list of applications when your phone is connected to your computer and that you synchronize and make sure that these applications are not selected to synchronize in the future.
-
I lost my ipad I need to add the device to icloud by using the serial number. Can I do this?
N ° you can not add it without physical access to the device.
-
If someone got the error message: "the application has lost the device context? This appeared on my iPad on the application of jam cookie there is a thin red strip across a black screen with the error message locked in the red band. Help!
Reset the iPad. Press and hold the power and home together for 10 seconds until the Apple logo appears.
-
I followed each step that I could find on the Apple Web site. The PC recognizes the iPad iPad wonder to trust the PC and I do it, but iTunes does not show the iPad and the Device Manager doesn't show anything Apple. I even uninstalled, to alreay redownloaded and reinstalled iTunes.
Have you tried to remove and reinstall iTunes by following the steps here? All the steps are essential to eliminate corrupt drivers:
Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components
-
My Ipad mini will not connect with my wifi at home. Other devices are connecting with the wifi at home. I turned the mini ipad market a few times and nothing. He recognizes wifi but when I touch the password, it continues to request the password. Help! It was working fine earlier in the day.
What has happened with your iPad since earlier today, when it worked? updated App or iOS? nothing at all
If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network
-
My iPad mini asks for a password after the upgrade to iOS 9.3, but no password was put on the device. What is the solution?
I guess it is asking you to CREATE an access code. You can disable it later.
Maybe you are looking for
-
My iPod nano 2nd generation gets disk errors after installing iTunes?
I use my iPod nano 2nd generation for... Wow little almost 10 years now and of course is not as sensitive, a little laggy sometimes, battery life isn't as good but still never had real problems with it that can be repaired by a reset. Well not until
-
The only way to prevent that I found so far is to close Firefox. When I opened to the top, go to the website, the user name and password are empty. It didn't happen with previous versions of Firefox.
-
Windows 7 update continues to ask from version 11 version 10.0.2
I am running windows 7 64-bit and updated for firefox 11. Now, windows update appears and says I need to update constantlyMozilla Firefox (en-US) 10.0.2 32 bits. Obviously, this is not correct. But I used the update anyway, and now everytime I open F
-
Internal modem in model Envy 23
I want to send a fax from my HP Envy 23 t - have an internal modem, and if so, where is the connection and how do I connect to my phone?
-
Why is all my email goes directly into the file deleted instead of the Inbox?
Every piece of incoming e-mail goes directly into my deleted file and not through the Inbox. Why?