stopped working eHome Ir remote

Similar Questions

• Audio has stopped work on disabling Remote Desktop device Redirector Bus.

  What is a remote desktop device redirector bus? First of all, I have a laptop. Second, after you turn off the equipment my audio stopped working in services. This hardware driver is Microsoft. My concern is why my audio hardware requires remote redirection as that on behalf of disabled bus? On further investigation, Dell has a bus Director. Not a bus "redirector".

  Hello Newman,

  Thanks for posting your question in the Microsoft Community. We are happy to help you.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. why you have disabled hardware?

  2 do you have remote sessions enabled on the computer, or you are using Remote Desktop Services for any purpose?

  3. when exactly you receive the error message?

  Please respond to this answer we will be happy to help you.

  Thank you.

• Apple TV (3rd generation) remote control suddenly stopped working

  I used aluminum remote on my 3rd generation Apple TV for years without a single issue.  Then last night, after working fine most of the evening, it simply stopped working.  The first thing I did was to get the distance within two feet of the Apple TV, and then I was able to make it work.  To me, this indicates a battery is weakening, so I replaced it.  Same problem: Apple TV does not remotely, unless I get very, very close.  Just in case, I got a new battery, I tried a second.  Same question.

  I did a bit of digging in the community forum, and here's what I've tried:

  -restarted successfully the Apple TV via the software and then again just unplug the power cord and wait 10 seconds, but the problem persists.

  -successfully paired and re-paired remote control, but the problem persists.

  ATV shows a solid light when I push buttons, unless I come to this beach to two feet and then it flashes once as her answers ATV.

  I have looked on the IR through the camera of my iphone, but don't see any red flashes... and yet the ATV receives the signal from the remote control if it is close enough.

  Curiously, as part of my diagnosis, I noticed that the "UP" button had become insensitive, even from the beach which work the other buttons.

  I have not dropped the remote or mistreated it somehow, so can't see why it would break suddenly without reason.

  I'm puzzled.

  Your troubleshooting sound research.

  I would buy a new remote from Apple and try it.  They are $19.00.  If she is doing the same, the receiver IR of the ATC is responsible and return the new remote control within 14 days for a full refund.

  If it works keep the remote control.

• Apple TV remote stopped working - Apple TV 4 Gen

  Hello

  My new Apple TV remote suddenly stopped working, I plugged into the adapter and then the apple popped up TV "device disconnected.  It seems that I fried it when I plugged it in.

  I have tried all troubleshooting techniques suggested such as:

  1. turn on Apple TV

  2. hold down the menu and the volume button up for 5 seconds, while 3 inches in front of the Apple TV

  3 try to connect via bluetooth.

  4 plug the remote into the charger.

  None of these techniques worked.  I think that the thing is fried somehow.

  Any suggestions?  I have a warranty, do you think I can send just to the remote folder in Apple (not the apple TV with her) and get a new one?

  Maybe that's a problem with the Apple TV rather than with the remote control.

  1. If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
  2. If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
  3. If you have tried all of these steps, is not a distance sooner or a USB - C cable or using them is too inconvenient, return to the store where it was purchased for a replacement.

• remote control stops working

  I have a 600PC Touchsmart with TV tuner comes with a remote control to control TV channels / volume... etc.

  It worked well for about 12 months. Now, the remote control works well when the PC is first turned on, but then stops working after about 20 minutes.  Only, it works again when the PC has been activated and turn it back on.

  I replaced the batteries and the remote control - but this happens again - which leads me to think that this is a problem in the PC itself.

  This may or may not be connected, but at the same time - the wireless mouse has stopped working and I had to buy a different mouse wth a wireless transmitter, connected to a USB port and now works fine.

  Any ideas what could be the problem?

  Hello jjf23,

  To see if it solves the problem, follow these steps:

  1. "control Panel."

  2 system.

  3. "Device Manager."

  4 expand "controllers of Bus USB"

  5 right click on each of the items listed individually and select 'Properties' for each item. If there is a "power management" tab click on it. Make sure that the "allow the computer to turn off this device to save power " unchecked.

  6 click on "OK" and "restart" your computer.

  If they are not already checked, simply reply with it.

  Thank you

• Remote Desktop has stopped working suddenly Premium Ultimate

  I used to be able to remote desktop to my laptop with Vista Home Premium on my desktop with Vista Ultimate. All of a sudden, it stopped working (March 09). I tried many steps of troubleshooting without success and I searched and searched online with no resolution. Help! I examined even the laptop to ultimate upgrade, but I seriously doubt that would correct the problem, since I should be able to remote desktop ON the ultimate machine (not in it, of course) and did so successfully for over a year... so far. I don't know what changed between yesterday and today, with the exception of Windows updates. No other software or hardware has been installed. The laptop has wireless and it works very well - I can access the Internet and the network with no problems at all.

  Steps, I have taken/other info: (not necessarily in order - just write them as they come to me)
  1) reset all the workstations and the router (I have a 3rd computer which has XP also).
  (2) checked to make sure port 3389 is open on my router 2 and in the firewall (McAfee). Within McAfee, do ensure that the remote desktop program and service were allowed, both directions and on all the workstations. Also controlled canyouseeme.org to ensure that port 3389 is indeed open and he succeeded.
  (3) connection I tried with the firewall disabled on two workstations and always without success.
  (4) Made sure that on the host, the remote settings have been enabled and all users can connect, using any version of Windows. Also tried unchecking, reset and rechecked.
  (5) the user accounts on all workstations are directors.
  (6) the fact that the Terminal Server service has been started on the host. Tried them stopping and restarting.
  (7) tried ping - success in all directions by the two IP address and computer name.
  (8) network resources are available in all directions - I can see and access files shared all around.
  (9) installed all the Windows updates available. Reloaded later.
  (10) remote desktop from the laptop to the machine off XP is successful. Ultimate machine to XP is successful. From XP to ultimate is successful. The only one who does not work (and it's an important) is from the laptop to the machine by excellence. Argh!
  (11) even tried to restore the laptop provided the factory (tested - didn't work) and then through all Windows updates (test I went - never able to operate).
  (12) fact that Windows Firewall has been disabled on all workstations.
  (13) fact that network discovery, file sharing and public folder sharing is turned on.
  (14) RDP I tried with the name of the computer with the IP address.
  What Miss me? The only thing I can think is that somehow one of Windows Update caused this problem, but my research online for someone else knows this at the same time me are coming short. So I'm completely confused and frustrated!
  Thanks for reading my post, and I'd appreciate any help.
  Sally

  I didn't need to post on the technet forum, because I have solved the problem. I decided to bite the bullet and just give my idea to try and hope for the best (created a first system restore point). The solution was so freakin ' easy... wonder why I couldn't find all the details on how to do...?

  In any case; On the ultimate box (the one I am trying to remote desktop in), I opened the management console (mmc.exe) and add the Certificates snap, for the computer account, computer local. Double click on certificates, double click on the desktop folder remotely, double click on the Certificates folder and highlighted the certificate (there was only one, with the name of the computer as the title) and removed (first of all, I copied and put it in another folder, just in case where).

  This solves completely the whole issue and workaround is no longer necessary.

  I hope this helps someone else.

  Sally

• "Remote Desktop connection has stopped working" problem on Windows 7.

  When I try to connect to one of my Windows 2003 servers from my Windows 7 Ultimate pc, I get an error:
  "Remote Desktop connection has stopped working". It has something to do with the NLAapi.dll. If I rename this dll, TS works very well. I used the dll from another computer running Windows 7 RC and it works too, but in one of these two cases, while it corrects the TS connection, it causes other errors, maily with the network and sharing Center. Long story short, I think that there is a bug with nlaapi.dll. I can connect properly to my boxes of Windows XP SP3 servers. I ran all the updates on my 2 k 3 box, but still does not work.

  Here is the log of the event viewer:

  Name of the failing application: mstsc.exe, version: 6.1.7600.16385, time stamp: 0x4a5bce80
  Name of the failed module: NLAapi.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdfc9
  Exception code: 0xc0000005
  Offset: 0x000000000000c138
  ID of the process failed: 0xf90
  Start time of application vulnerabilities: 0x01ca55cc39bf05f0
  The failing application path: C:\Windows\system32\mstsc.exe
  Path of the failing module: C:\Windows\system32\NLAapi.dll
  Report ID: 7772b4f0-c1bf-11de-bfa2-001d60a28de8

  Hi dekopolis,
   
  Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is related to the Server 2003 and would be better suited in the Community (Insert here). Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/categories/ Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 Clipboard stops working when it is connected to the remote desktop

  The two machines are Windows 7 SP1 with the latest updates.  Remote configuration is configured with the selected share clipboard.  The Clipboard works on the host machine until the remote desktop is started.  The Clipboard of the remote computer works without any problem.  Clipboard on the host machine starts working again when rdpclip.exe is interrupted on the remote computer.  If rdpclip.exe is restarted on the remote computer, the Clipboard of the host machine then stops working again.

  I had similar problems with Clipboard in the past, but getting the two machines on a fixed day.  It seems more recent updates have created a new problem.

  Hello

  Thanks for posting your query in Microsoft Community.

  The question could arise if the process is damaged and should be revoked on the remote computer to restore operation. I suggest you to try the following steps on the remote computer and check if the problem persists.

  1. Open Task Manager (right click taskbar and select Task Manager)
  2. Go to the process tab
  3. Select rdpclip.exe
  4. Click on end process
  5. Go to the Application tab
  6. Click on the new process
  7. Rdpclip type
  8. Click OK

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Remote Desktop Connection has stopped working since 7 for 2008

  Hello

  Dears I have strange problem and I have read everything discussed here, but it's not helping

  I have asus laptop with Windows 7 Home x 64 N53SM

  everything beautiful, and up-to-date

  Remote Desktop works well also

  one problem I can't use desktop remotely from my laptop to any server that is running windows server 2008 exactly... .other version 2003 work ok

  When I try to access to any server ruin win 2008 Server and put the server ip and password user name years and hit enter I see the error message

  Remote Desktop Connection has stopped working and computer laptop freez second then back with this message

  (Remote Desktop Connection has stopped working)
  A problem caused program stop working correctly
  Windows will close the program and notify you if a solution is available

  This is the complete log of the event viewer

  Results for: Microsoft product: Windows operating system; Version: 6.1.7600.16385; Event ID: 1000. Event source: Application error;

  ===========

  Name of the failing application: mstsc.exe, version: 6.1.7601.17514, time stamp: 0x4ce7ab44
  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
  Exception code: 0xc0000374
  Offset: 0x00000000000c40f2
  ID of the process failed: 0 x 1418
  Start time of application vulnerabilities: 0x01cd48bcf13be48a
  The failing application path: C:\Windows\system32\mstsc.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: 39102a22-b4b0-11e1-a89a-005056c00008

  ===========

  Please help me to solve this problem without need format :)

  Hello

  As you try to desktop connection remotely from Windows 7 to Windows Server 2008, it would be preferable to send the same in the Technet community for more help.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Hope the information is useful.

• Mouse Bluetooth stops working when you use Remote Desktop

  Hello, I have a Dell i7 using Windows 8 and a comfort Sculpt bluetooth mouse.  The two work together well, but when I use remote desktop, the mouse stops working.  I have checked the logs of windows, but don't see anything apparent that would explain the bluetooth mouse to stop working with RDP.  Is this a known issue?  And is there a known solution?

  Hi Sharief, thanks for the quick response!  I think that I could find my own solution to the problem.  I ended up remove the bluetooth driver that came with my Dell laptop and allowed the Microsoft Generic bluetooth driver to take charge.  The mouse now works like a charm, especially when I am using RDP.   I did have a problem again on the generic driver.  Thanks again!

• MS Updates caused problems "Media Center has stopped working"

  After the MS Updates this week, we have a problem with our Media Center. We have a HP Touchsmart IQ526 running Vista Home Prem when are connected to the Internet and our local cable system. Everytyhing worked almost without problems because we have installed in January. After that MS Updates this week required a reboot, Media Center stops whenever we change the channel - errors "Media Center has stopped working".  Sometimes when changing positions both with the remote control and with the mouse. Is there anything other than a reinstallation of Vista?  Can you help us?

  Hello Cwray

  Please write to the Microsoft Forums.

  This error message can occur if there is some system files corrupted on your computer. I suggest that scan you a file system [SFC] checker on the computer that would be a search for system files corrupted on the computer and replace them.

  (A) the SFC scan enforcement procedure:
  1. click on the Start button
  2. on the Start Menu, click all programs followed by accessories
  3. in the menu accessories, right-click on command line option
  4. in the drop-down menu that appears, click the "Run as Administrator" option
  5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
  6. in the command prompt window, type: sfc/scannow then press enter
  7. a message is displayed to indicate that "the analysis of the system will start.
  8. be patient because the analysis may take some time
  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue
  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
  11 after the scan finished, close the command prompt window reboot the computer and check.
  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista.
  For more information please visit the link below.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  Check whether the problem is resolved.

  B. I also suggest you to rebuild the Media Center data store.
  To do this, follow these steps:
  1. Click Start, type run in the start search box, then click on run in the list programs.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  2. in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.
  3. in the details pane, right-click right mediacenterdatastore.db and then click Rename.
  4 rename the file in mediacenterdatastore.old
  5. run the file, %systemdrive%\Windows\eHome/mcUpdate.exe
  6. launch windows media center.

  Click on the link below to get more information on media center.
  http://thegreenbutton.com/forums/default.aspx

  C. I also suggest you to check the boot and if you are able to access the Windows media center.
  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Boot stops interference with other third-party software on the computer.
  Steps to perform the clean boot:
  1. click on start, type msconfig in the search box and press ENTER to start the System Configuration utility. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  If the problem is solved, check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• My thunderbird (windows 8) essentially has stopped working. More than one minute to open an email - all other functions have similar delays. What should I do?

  For some reason, thunderbird (windows 8) essentially has stopped working. More than one minute to open an email - all other functions have similar delays. I tried to archive, but I get a message that says that a script has stopped working. He does the same in thunderbird safe mode. My old computer (XP) works very well. I can't find my profiles on windows 8 to rebuild the database world.

  Follow-up: McAfee was the problem. I contacted them via chat. Remotely, they took control of my computer and changed the settings. TBird works fine now.

  Thank you for all your help.

• Transmission stopped working ReadyNAS 104 firmware 6.4.0

  All of a sudden my Transmission stopped working check chkconfig, transmission is not turn on so I tried but still a mistake.

  root@NAS:~# chkconfig transmission on
  insserv: Network Service must be activated to start the service transmission-daemon
  insserv: out now!
  / sbin/insserv failed, exit code 1

  manually start the exit 0

  OOT@voidness-NAS: ~ # service transmission start
  From client bittorrent transmission-daemon...
  From bittorrent client transmission-daemon succeeded

  However its does not work, because I can not connect to the GUI using a browser, still check with netstat and telnet, the system is not listening on 8181.

  root@voidness-NAS: ~ # telnet localhost 8181
  Try: 1...
  127.0.0.1 by train...
  Telnet: unable to connect to remote host: connection refused

  It's really weird, why he asked for the networks? and why all of a sudden it stopped working when I have not made any changes?

  Help, please

  I reinstalled the same firmware and reinstall the transmission through the apps page and everything is fine now. Thanks heaps for you help. This can be closed

• on dv6 fingerprint reader has stopped working after installing Norton 2012

  Fingerprint reader has stopped working after installing Norton Internet Security 2012 on both of my notebooks from HP.

  Product name: HP Pavilion dv6

  Operating system: Windows 7 64-bit

  Error message in Device Manager under biometric devices in Device Manager displays an exclamation mark beside validity sensors (WBF) (PID = 0018). The following message is under the general tab: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  Driver is present and seems to be up-to-date.

  Appreciate your help.

  I have finally isolated the problem of my software lack of HP dv6 fingerprint reader. I think Norton Removal Tool, available online at www.symentec.com/nrt, was the reason. I am sure this conclusion because the exact same problem occurred after I installed Norton Internet Security 2012 on laptop HP same as my wife. I tried, in vain, to uninstall and reinstall the driver for the biometric fingerprint device provided by Validity Sensors, Inc.

  After spending a day and a half to try to "solve" the problem, I decided to restore my system and go back to the prior agreement of the point of the installation of Norton. Thank you HP to make this process quick and painless. Don't forget that if you installed anything after the restore point, it will have to be reinstalled.

  Fortunately, there's a less intrusive on CD of Norton removal tool. This utility uninstalls an older version of Norton you are requested to restart and then installs the latest NIS. It is a method of removal safer that wide brush offered by the Norton Online link, which wipes everything remotely suspect.

  After reinstalling Norton Internet Security 2012 from the CD, everything works as it should, including the fingerprint reader.

• Windows Media Center has stopped working

  I get a message saying windows media center has stopped working, I also have one indicating Manager windows media center has stopped working, I think that there is also a manager of STF Windows as well. It's just so a new computer should have no probs. There is also something strange happens with my internet connection. I have all the bars of signal strength, but keep dropping out. Telstra have been of no help!

  I tried the SCF/scannow but I received a message "windows resource protection cannot perform the requested operation" achieved 63% then stopped.
  It was moved by John of microsoft, but the place where? still no answers.

  Hello Emma Howard.

  Thank you for your message.  Please follow the steps below to see if re-register components of the media centre will help to resolve the problem.
  Click on the 'Start' button > in the search box, type "Command" > right click on command prompt and select "run as Administrator".
  Once the prompt command opened in a high State, type the following shots entered after each line.

  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  Please let us know if it did or did not help to solve the problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.