Stops after the start-up satellite c660 (5 min or more)
I have I have Satellite c660 with a problem since yesterday it stops after startup (5 min or more)
the back cover is very hot, I think its still under warranty but I rader not use Beceause I can't put my laptop very long.
where can I check the warranty, and is a way to solve this problem myself (without losing my warranty) or something I can try er
I send I mail to info at [email protected] (Belgium), but it returns Beceause the adres do not exist. : manfrustrated:
Hello
I think that the laptop stops because of the high temperature.
It would happen to prevent parts of material damage.
Clean the ventilation openings in the past?
To do this using a jet of compressed air, it's the right tool to make the dust removed.
I did that several times, it helps to keep good air circulation.
PS: If you have hardware problems with your Toshiba devices, the first person to contact is the Toshiba authorized service partner in your country
Tags: Toshiba
Similar Questions
-
Out of the blue my Storm will stop current synchronization via the address book. A window appears with the following error code: 0x8004fd28 check the Documentation. I've been syncing with a laptop with Windows 7 Professional without difficulty for three weeks. Any help would be appreciated.
Hi and welcome to the Forums!
Here's a knockout who deals with this error:
- KB16153 "0x8004fd28" error during the synchronization of the calendar using BlackBerry Desktop Manager
I hope that it contains something useful!
Good luck and let us know!
-
Problem 1: There are months, my two year old Toshiba Satellite L655 s5096 started losing charge the battery even when it is plugged.
Sometimes, the problem was solved by using a different wall outlet. I replaced the battery, but eventually the problem comes back.Problem 2: at the same time that the problems loading starts, Windows has stopped booting normally. Sometimes repair or restoration leads to a normal start, but sometimes I run Chkdsk/r (Chkdsk sometimes the only works [!]) Mode through safe mode w/Command Prompt.
Problem 3: There are two days of problems 1 and 2 reappeared, but a few minutes after that Windows starts, my machine stops, even if I am able to run Wndows in Mode safe mode w/network.
I am correct in surmising that this isn't a motherboard (hardware) problem? I don't really want to have to replace this machine if I don't have to. Is this a Windows problem? Upgrade to Windows 8 would solve the problem? Or is it the result of the virus that escaped my Avast scans?
I'll install Windows 8 when I checked my automatic online data storage works.
Hi Denise,
Thanks for posting your question in the Microsoft Community forum.
I understand that the computer shuts down shortly after starting. I'll help you with this problem.
1. what security software is installed?
2. are you sure the workload problem is not limited to a faulty wall unit?
3. have you checked with the manufacturer of the computer if it is not a battery problem?
To resolve this issue, let us try these methods:
Method 1.
You can create a new power plan and check if that helps.
Power plans: frequently asked questions: http://windows.microsoft.com/en-ca/windows7/power-plans-frequently-asked-questions
Method 2.
Keep the battery power: http://windows.microsoft.com/en-ca/windows7/conserving-battery-power
Method 3.
You can remove the battery and connect the power cable from the wall cabinet and check. If the computer does not stop after the restart, then it might be a problem with the battery.
For any question related to Windows, please do not hesitate to contact us and we will be happy to help you.
-
Hello
My hp 10 Tablet has less than two years, and I don't use much. The problem started with the volume suddenly down to zero out of control, and even if I press the volume up button, the volume is just down once again, when I let the button. And then the Tablet has started to close automatically, even when it has a lot of power left, as more than 50%. Now, even if I have fully charged, when I press the power, immediately after the start, it says, 'stop' and he just stops. I try to turn it on again, and the same story is repeated. I'm just fet upward. What is a mechanical problem or a software problem? I don't understand. Please help me.
Hello and welcome to the HP support community!
It is difficult on this side of the screen of remote diagnosis your problems!
You should try to eliminate the causes of the problem. Only thing we recommend is to first try a Factory Reset. It recharges a clean copy of the OS. If she solves problems, then you're done!
If problems persist or get worse, then it is probably related to the material. Damaged the volume button, USB port, due to lack of battery, etc.
Perform a factory reset on your tablet.
WyreNut
-
The computer stops immediately after the start, repeatedly or a few minutes after have managed to start it. The error log showed two evenys:
(1) the service Acquisition of Image Windows (WIA) suspended at startup; (2) the server {81ED811 A1F4E726-8CF1 - 11 D 1-BF92-00600} is not registered with DCOM within the required time. After restarting the computer, and after installing all of the updates, I installed the last printer; I unplugged the printer and the computer booted immediately! Does anyone have suggestions, and if I have to update the drivers (hp Laser jet 5 p & hp scanjet 5370C;) How? Please help, frustration to a max; Thank you very much; HeinrichDS
HeinrichDS
Recommendation of the Palcouk of sense what is the operating system and is worth a try. If you're still having problems, then you need to talk to specialists in XP (because it is a Forum for Vista). In this case, please transfer your question in the Forums of XP to http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where the XP experts will be happy to help you.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Bad Pool Header Stop 0 x 00000019 after the start of AOL 9.0 VR
Hellomy Vista system works very well, but after the start of AOL 9.0 VR shows blue screen BAD_POOL_HEADER STOP: 0 x 00000019...
This is real problem can help you?
Happy new year and thanks for your support
MCLischke
I have seen this error with AOL using a flash drive for ReadyBoost. Remove it and test.
Messages rating helps other usersMark L. Ferguson MS - MVP
-
Windows becomes white after the start
I have windows vista. When comp. after windows startup, it takes about 2 min. then scren goes white with arrow always on the screen. If I pull up the Task Manager, it rises and I can do a few things, but not much. System Restore does not and if I try safe mode it just stops about 1 min after the start.
Explorer
Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).
To see if a fix is available
In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.
You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.
If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).
Close the browser and start a command prompt
- Close Windows Explorer
- Start - All Programs - Accessories - right on command prompt and choose run as administrator.
- Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
- Press Ctrl + Alt + Delete then Task Manager.
- Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
Then to restart the Explorer after trying all of the following
- Press Ctrl + Alt + Delete and choose Task Manager
- In the Task Manager, click the file menu and then click new task (run) and enter explorer
If you cannot start the Explorer at all
- Press Ctrl + Alt + Delete and choose Task Manager
- Under the processes tab, click Show processes from all users to elevate to administrator
- In the Task Manager, click the file menu and then click new task (run) and type cmd
- Other things you can try typing
Explorer
Explorer c:\
Explorer/e, c:\
wercon
control
Iexplore
Rstrui
If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.
Reregister the shell registry entries
It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.
Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
regsvr32 /i shell32
regsvr32 /i urlmon.dll
regsvr32 RPCRT4.dll
regsvr32 PROPSYS.dll
regsvr32 MSCTF.dll
regsvr32 cscui.dll
regsvr32 rsaenh.dll
regsvr32 timedate.cpl
regsvr32 ATL DLL
regsvr32 OLEACC.dll
regsvr32 actxprxy.dll
regsvr32 USERENV.dll
regsvr32 msshsq.dll
regsvr32 NaturalLanguage6.dll
regsvr32 thumbcache.dll
regsvr32 WINTRUST.dll
regsvr32 MMDevAPI.DLL
regsvr32 audioses.dll
regsvr32 audioeng.dll
regsvr32 ExplorerFrame.dll
regsvr32 msi.dll
regsvr32 FirewallAPI.dll
regsvr32 netshell.dll
regsvr32 pnidui.dll
regsvr32 QUtil.dll
regsvr32 c:\windows\system32\wpdshserviceobj.dll
regsvr32 WINHTTP.dll
regsvr32 C:\windows\system32\qagent.dll
regsvr32 C:\windows\system32\portabledeviceapi.dll
regsvr32 wbemprox.dll
regsvr32 wbemsvc.dll
regsvr32 fastprox.dll
regsvr32 imapi2.dll
regsvr32 wshext.dll
regsvr32 gameux.dll
regsvr32 msxml6.dll
regsvr32 vbscript.dll
regsvr32 jscript.dll
regsvr32 wshext.dll
regsvr32 wshom.ocx
regsvr32 wshcon.dll
regsvr32 scrrun.dllDelete the folder and the settings of the Menu
This will remove the settings are saved for each file that you visit. Also the order of the start menu.
Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f
Delete the thumbnail and icon Caches
Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
attrib - r s h '% userprofile%\AppData\Local\*.db '.
del "% userprofile%\AppData\Local\*.db".
Disable thumbnails and previews
Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.
If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.
Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.
If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f
Turn around after testing the Explorer.
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f
A boot is a way to explore
It can be caused by a shell extension.
Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).
The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.
- Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
- Close Windows Explorer
- Start Autoruns by right-clicking and choose run as administrator
- Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
- Go to the Explorer tab and uncheck everything to the left.
- Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
- Press Ctrl + Alt + Delete and choose Task Manager. Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
- Click the file menu and then click new task (run) and enter explorer
If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.
Run Microsoft Fixit
Microsoft has a range of automatic programs to solve common problems. To see problems explore
http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us
For the visit of the list the most comprehensive
http://support.Microsoft.com/FixIt/en-us
When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.
Recycle BinIf the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).RD C:\$RECYCLE. BIN/s/qthen repeat for each drive to change the drive letter, for exampled:\$recycle Rd. BIN/s/qe:\$recycle Rd. BIN/s/qIf the Office does not startThis will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).MD "% userprofile%\DesktopTest".Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /fMD "% public%\desktopTest".Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t fTo restore default after having tested if begins to explore.Set ExpFix1 = % userSet ExpFix2 = % profilereg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/fSet ExpFix1 = % PubSet ExpFix2 = % licreg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/fYou will need to disconnect then.New entry missing folderIf the above does not help.Download NewFolder.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121.Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the NewFolder.reg. -
XPS 13 (9343) crashes minutes after the start of
A week ago, my Dell XPS 13 running Windows 8.1 suddenly stopped working about 1-3 minutes after the start, then rebooted - just to keep crashing and restarting after a few minutes. Unable to understand what caused the problem, I did a clean install of Windows 10; that is, fitness and installing W10 bootable USB drive.
After installing a few Dell drivers (wifi, video, sound), the problem returns. Same question; After connection, Windows seems to start as usual, then crashes after 1 to 3 minutes.
The system is a Dell XPS 13 (9343), i7-5500, 512 GB SSD, QHD touchscreen.
TIA for any help.
-Robert
The memory on this model is welded in - it cannot be deleted.
If you haven't run a complete diagnosis of the hardware, F12 repeatedly at startup will help you do. You can also watch to see if you have crash dump files (WhoCrashed is a good utility for their sight-reading).
-
RESPONSE VERY SLOW AFTER THE START-UP OF THE PC.
My PC has become very slow. When I start my all right, but
When the desktop I have to wait at least 7-8 minutes before updating it the first time.
If I don't wait and refresh it just after the start and then very slow after clicking answers, then after
sometime, windows Explorer stops working and I have to restart my PC.I don't know why this problem is ancestral. I thought before formatting my PC and heal
I ask you all if you have any solution.I tried all possible measures such as:-1. using the system configuration to stop unnecessary programs from startup.
2 using the Disk Defragmenter.
3 using CCleaner to remove all files of PC unnecccessary.
4 using the KASPERSKY INTERNET SECURITY 13, I scanned and found 0 THREATS.I have 320 hard drive with two local drives: 1. (c) 17.5 GB free 99.9 GB;
2 (D :)) 27.4 free GB of 198 GB.)System information: -.
-------------------------------------------------------------------------------------------------------------------------
Operating system: Windows 7 Home Basic 32-bit (6.1, Build 7601) Service Pack 1
Manufacturer: Gigabyte Technology Co., Ltd..
System model: G41M-ES2L
Processor: Intel (r) Core (TM) 2 Duo CPU E7500 2.93 GHz (2 CPUs), ~2.9GHz
Memory: 2048 MB RAM
Available OS memory: 1916MB RAM
Page file: 1385MB used, 2447 MB of available space
DirectX version: DirectX 11.Please HELP me ON THE above of PROBLEM as SOON AS POSSIBLE! I have!
Thank you...
Yuvraj
This Jetta post may be of interest:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-to-make-Windows-7-32bit-into-64bit-with/5b4581fc-2e68-49A0-a529-28257d00e069#LastReply -
vmplayer - 5.0.0 ends immediately after the start
Hello
I'm under fedora 17 with 3.5.2 - 3.fc17.x86_64 kernel and VMware-Workstation-full-version 9.0.0 - 812388.x86_64.bundle.
vmplayer - 5.0.0 ends immediately after the start.vmplayer - 5.0.0 runs only with kernel - 3.4.0 - 1.fc17.x 86_6 4
The content of the vmware-modconfig - 5653.log file looks as follows:
2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: Log for VMware Workstation pid = 5653 version = version 9.0.0 Build = build-812388 option = output
2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: The process is 64-bit.
2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: Host codepage = UTF-8 encoding = UTF-8
2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: Host is the version of Fedora Linux 3.5.2 - 3.fc17.x86_64 17 (Beefy Miracle)
2012-08-23 T 20: 00:54.505 + 01:00 | vthread-3 | I120: Msg_Reset:
2012-08-23 T 20: 00:54.505 + 01:00 | vthread-3 | I120: [msg.dictionary.load.openFailed] cannot open the file ' / usr/lib/vmware/settings ': Datei oder Verzeichnis nicht found.
2012-08-23 T 20: 00:54.505 + 01:00 | vthread-3 | I120: —————————————-
2012-08-23 T 20: 00:54.505 + 01:00 | vthread-3 | I120: Preferences file of the option PREFS not found in/usr/lib/vmware/settings. Using the default values.
2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: Msg_Reset:
2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: [msg.dictionary.load.openFailed] cannot open the file ' / home/martin/.vmware/config ': Datei oder Verzeichnis nicht found.
2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: —————————————-
2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: Optional preferences PREFS not found in home/martin/.vmware/config file. Using the default values.
2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | W110: Connecting to /tmp/vmware-martin/vmware-modconfig-5653.log
2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Reading in info for the vmmon module.
2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Reading in info for module vmnet.
2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Reading in info for the vmblock module.
2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Reading in info for vmci module.
2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Reading in info for the vsock module.
2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Definition of vsock to depend on vmci.
2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Created new pathsHash.
2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Modinfo calling over 'vmmon.
2012-08-23 T 20: 00:54.513 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.
2012-08-23 T 20: 00:54.513 + 01:00 | vthread-3 | I120: Modinfo invoking on "vmnet".
2012-08-23 T 20: 00:54.516 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.
2012-08-23 T 20: 00:54.516 + 01:00 | vthread-3 | I120: Modinfo invoking on 'vmblock '.
2012-08-23 T 20: 00:54.519 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.
2012-08-23 T 20: 00:54.519 + 01:00 | vthread-3 | I120: Modinfo calling over 'vmci.
2012-08-23 T 20: 00:54.521 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.
2012-08-23 T 20: 00:54.521 + 01:00 | vthread-3 | I120: Modinfo calling over 'vsock.
2012-08-23 T 20: 00:54.523 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.The content of the file looks like kernel.log as follows:
August 23 at 20:01:01 localhost kernel: [710.974813] general protection fault: 0000 [#5] SMP
August 23 at 20:01:01 localhost kernel: [710.974818] CPU 1
August 23 at 20:01:01 localhost kernel: [710.974819] Modules related to the: stv0299 ves1x93 dvb_ttpci ttpci_eeprom saa7146_vv saa7146 dvb_core videobuf_dma_sg videobuf_core v4l2_common videodev media exactly bluetooth rfkill vmnet (O) (O) vsock vmci (O) (O) vmmon fuse snd_hda_codec_hdmi ppdev coretemp lpc_ich mfd_core nvidia (IN.) snd_rme96 snd_hda_codec_analog serio_raw parport_pc parport skge sky2 nfsd lockd sunrpc kvm_intel i2c_ auth_rpcgss nfs_acl i2c_i801 shpchp core KVM snd_hda_intel snd_hda_codec snd_hwdep snd_pcm asus_atk0110 uinput microcode snd_page_alloc snd_timer snd soundcore binfmt_misc firewire_ohci firewire_core crc_itu_t edac_core i82975x_edac [last unloaded: scsi_wait_scan]
August 23 at 20:01:01 localhost kernel: [710.974851]
August 23 at 20:01:01 localhost kernel: [710.974853] Pid: 6227, comm: vmware-vmx Tainted: manufacturer of P D O 3.5.2 - 3.fc17.x86_64 #1 rod system product name/P5WDG2 WS PRO
August 23 at 20:01:01 localhost kernel: [710.974855] RIP: 0010: [] [] HostIF_SafeRDMSR + 0xf/0 × 30 [vmmon]
August 23 at 20:01:01 localhost kernel: [710.974863] RSP: 0018:ffff88016e7e5b88 EFLAGS: 00010246
August 23 at 20:01:01 localhost kernel: [710.974864] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 000000000000048b
August 23 at 20:01:01 localhost kernel: [710.974866] RDX: 0000000000000000 RSI: ffff88016e7f2590 RDI: 000000000000048b
August 23 at 20:01:01 localhost kernel: [710.974867] RTB: ffff88016e7e5b88 R08: R09 ffff8801bfc96610: ffffffffa0d46672
August 23 at 20:01:01 localhost kernel: [710.974868] R10: 0000000000000038 R11: 0000000000003246 R12: 0000000000000000
August 23 at 20:01:01 localhost kernel: [710.974869] R13: ffff88016e7f2580 R14: ffff88016e7f2580 R15: 00007fffdfd66850
August 23 at 20:01:01 localhost kernel: [710.974871] FS: 00007ff5cd372740 (0000) GS:ffff8801bfc80000 (0000) knlGS:0000000000000000
August 23 at 20:01:01 localhost kernel: [710.974872] CS: 0010 DS: 0000: 0000 CR0: 0000000080050033
August 23 at 20:01:01 localhost kernel: [710.974874] CR2: 000000000099ca 10: 00000001446 d 5000 CR4 CR3: 00000000000007e0
August 23 at 20:01:01 localhost kernel: [710.974875] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
August 23 at 20:01:01 localhost kernel: [710.974876] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
August 23 at 20:01:01 localhost kernel: [710.974878] vmware-vmx process (pid: 6227, threadinfo ffff88016e7e4000, task ffff8801b2699710)
August 23 at 20:01:01 localhost kernel: stack [710.974879]:
August 23 at 20:01:01 localhost kernel: [710.974880] ffff88016e7e5bb8 ffffffffa0d48e23 ffffffffa0d48da0 ffff88016e7e5be8
August 23 at 20:01:01 localhost kernel: [710.974883] ffff88016e7f2580 ffff88016e7e5bd8 0000000000000000 ffffffffa0d47780
August 23 at 20:01:01 localhost kernel: [710.974885] ffff88016e7f2580 00000000fffffff4 ffff88016e7e5c08 ffffffffa0d4ac1c
August 23 at 20:01:01 localhost kernel: [710.974888] Scout:
August 23 at 20:01:01 localhost kernel: [710.974892] [Vmx86GetMSR] + 0 × 83/0xd0 [vmmon]
August 23 at 20:01:01 localhost kernel: [710.974896] []? Vmx86GetUnavailPerfCtrsOnCPU + 0 × 0 × 150/150 [vmmon]
August 23 at 20:01:01 localhost kernel: [710.974900] [HostIF_CallOnEachCPU] + 0 × 0 × 20/40 [vmmon]
August 23 at 20:01:01 localhost kernel: [710.974904] [] Vmx86_GetAllMSRs + 0x2c/0 × 50 [vmmon]
August 23 at 20:01:01 localhost kernel: [710.974907] [] LinuxDriver_Ioctl + 0x70f/0xd40 [vmmon]
August 23 at 20:01:01 localhost kernel: [710.974911] []? unlock_page + 0 × 0 × 31/50
August 23 at 20:01:01 localhost kernel: [710.974914] []? __do_fault + 0x3f9/0 × 560
August 23 at 20:01:01 localhost kernel: [710.974916] []? handle_pte_fault + 0 × 95/0xb10
August 23 at 20:01:01 localhost kernel: [710.974920] []? ext4_file_write + 0xbf/0 × 260
August 23 at 20:01:01 localhost kernel: [710.974922] []? free_pages_and_swap_cache + 0xad/0xd0
August 23 at 20:01:01 localhost kernel: [710.974924] []? handle_mm_fault + 0 × 259/0 × 320
August 23 at 20:01:01 localhost kernel: [710.974927] []? do_page_fault + 0x1bc/0x4b0
August 23 at 20:01:01 localhost kernel: [710.974930] [LinuxDriver_UnlockedIoctl] + 0 × 0 × 18/20 [vmmon]
August 23 at 20:01:01 localhost kernel: [710.974933] [do_vfs_ioctl] + 0 99/0 × 580 ×
August 23 at 20:01:01 localhost kernel: [710.974935] [sys_ioctl] + 0 × 99/0xa0
August 23 at 20:01:01 localhost kernel: [710.974937] [system_call_fastpath] + 0 × 16/0x1b
August 23 at 20:01:01 localhost kernel: [710.974938] Code: 83 c4 e8 a6 01 84 3rd e0 44 89 e0 48 3 b 43 08 and 72 e9 48 89 df e8 33 b4 42 e0 eb 9th 90 55 48 89 e5 66 66 66 66 90 31 c0 89 89 32 31 f9 c2 ff 41 89 c0 48 e2 20 89 f8 4 c 09 48 89 16 5 c2 c1 d c3
August 23 at 20:01:01 localhost kernel: [710.974962] RIP [] HostIF_SafeRDMSR + 0xf/0 × 30 [vmmon]
August 23 at 20:01:01 localhost kernel: [710.974966] RSP
August 23 at 20:01:01 localhost kernel: [710.974968] - [end trace 04aa45b3d8c2dbda].VMware kernel modules compiles well
[root@fc17 tmp]# vmware-modconfig --console --install-all Stopping vmware (via systemctl): [ OK ] Using 2.6.x kernel build system. make: Entering directory `/tmp/modconfig-C4tvy7/vmmon-only' /bin/make -C /lib/modules/3.5.2-3.fc17.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \ MODULEBUILDDIR= modules make[1]: Entering directory `/usr/src/kernels/3.5.2-3.fc17.x86_64' CC [M] /tmp/modconfig-C4tvy7/vmmon-only/linux/hostif.o CC [M] /tmp/modconfig-C4tvy7/vmmon-only/linux/driver.o CC [M] /tmp/modconfig-C4tvy7/vmmon-only/linux/driverLog.o CC [M] /tmp/modconfig-C4tvy7/vmmon-only/common/apic.o CC [M] /tmp/modconfig-C4tvy7/vmmon-only/common/memtrack.o CC [M] /tmp/modconfig-C4tvy7/vmmon-only/common/hashFunc.o CC [M] /tmp/modconfig-C4tvy7/vmmon-only/common/vmx86.o CC [M] /tmp/modconfig-C4tvy7/vmmon-only/common/cpuid.o CC [M] /tmp/modconfig-C4tvy7/vmmon-only/common/task.o CC [M] /tmp/modconfig-C4tvy7/vmmon-only/common/comport.o CC [M] /tmp/modconfig-C4tvy7/vmmon-only/common/phystrack.o CC [M] /tmp/modconfig-C4tvy7/vmmon-only/vmcore/moduleloop.o LD [M] /tmp/modconfig-C4tvy7/vmmon-only/vmmon.o Building modules, stage 2. MODPOST 1 modules CC /tmp/modconfig-C4tvy7/vmmon-only/vmmon.mod.o LD [M] /tmp/modconfig-C4tvy7/vmmon-only/vmmon.ko make[1]: Leaving directory `/usr/src/kernels/3.5.2-3.fc17.x86_64' /bin/make -C $PWD SRCROOT=$PWD/. \ MODULEBUILDDIR= postbuild make[1]: Entering directory `/tmp/modconfig-C4tvy7/vmmon-only' make[1]: »postbuild« ist bereits aktualisiert. make[1]: Leaving directory `/tmp/modconfig-C4tvy7/vmmon-only' cp -f vmmon.ko ./../vmmon.o make: Leaving directory `/tmp/modconfig-C4tvy7/vmmon-only' Using 2.6.x kernel build system. make: Entering directory `/tmp/modconfig-C4tvy7/vmnet-only' /bin/make -C /lib/modules/3.5.2-3.fc17.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \ MODULEBUILDDIR= modules make[1]: Entering directory `/usr/src/kernels/3.5.2-3.fc17.x86_64' CC [M] /tmp/modconfig-C4tvy7/vmnet-only/driver.o CC [M] /tmp/modconfig-C4tvy7/vmnet-only/hub.o CC [M] /tmp/modconfig-C4tvy7/vmnet-only/userif.o CC [M] /tmp/modconfig-C4tvy7/vmnet-only/netif.o CC [M] /tmp/modconfig-C4tvy7/vmnet-only/bridge.o CC [M] /tmp/modconfig-C4tvy7/vmnet-only/filter.o CC [M] /tmp/modconfig-C4tvy7/vmnet-only/procfs.o CC [M] /tmp/modconfig-C4tvy7/vmnet-only/smac_compat.o CC [M] /tmp/modconfig-C4tvy7/vmnet-only/smac.o CC [M] /tmp/modconfig-C4tvy7/vmnet-only/vnetEvent.o CC [M] /tmp/modconfig-C4tvy7/vmnet-only/vnetUserListener.o LD [M] /tmp/modconfig-C4tvy7/vmnet-only/vmnet.o Building modules, stage 2. MODPOST 1 modules CC /tmp/modconfig-C4tvy7/vmnet-only/vmnet.mod.o LD [M] /tmp/modconfig-C4tvy7/vmnet-only/vmnet.ko make[1]: Leaving directory `/usr/src/kernels/3.5.2-3.fc17.x86_64' /bin/make -C $PWD SRCROOT=$PWD/. \ MODULEBUILDDIR= postbuild make[1]: Entering directory `/tmp/modconfig-C4tvy7/vmnet-only' make[1]: »postbuild« ist bereits aktualisiert. make[1]: Leaving directory `/tmp/modconfig-C4tvy7/vmnet-only' cp -f vmnet.ko ./../vmnet.o make: Leaving directory `/tmp/modconfig-C4tvy7/vmnet-only' Using 2.6.x kernel build system. make: Entering directory `/tmp/modconfig-C4tvy7/vmblock-only' /bin/make -C /lib/modules/3.5.2-3.fc17.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \ MODULEBUILDDIR= modules make[1]: Entering directory `/usr/src/kernels/3.5.2-3.fc17.x86_64' CC [M] /tmp/modconfig-C4tvy7/vmblock-only/linux/filesystem.o CC [M] /tmp/modconfig-C4tvy7/vmblock-only/linux/file.o CC [M] /tmp/modconfig-C4tvy7/vmblock-only/linux/block.o CC [M] /tmp/modconfig-C4tvy7/vmblock-only/linux/module.o CC [M] /tmp/modconfig-C4tvy7/vmblock-only/linux/super.o CC [M] /tmp/modconfig-C4tvy7/vmblock-only/linux/control.o CC [M] /tmp/modconfig-C4tvy7/vmblock-only/linux/stubs.o CC [M] /tmp/modconfig-C4tvy7/vmblock-only/linux/inode.o CC [M] /tmp/modconfig-C4tvy7/vmblock-only/linux/dentry.o LD [M] /tmp/modconfig-C4tvy7/vmblock-only/vmblock.o Building modules, stage 2. MODPOST 1 modules CC /tmp/modconfig-C4tvy7/vmblock-only/vmblock.mod.o LD [M] /tmp/modconfig-C4tvy7/vmblock-only/vmblock.ko make[1]: Leaving directory `/usr/src/kernels/3.5.2-3.fc17.x86_64' /bin/make -C $PWD SRCROOT=$PWD/. \ MODULEBUILDDIR= postbuild make[1]: Entering directory `/tmp/modconfig-C4tvy7/vmblock-only' make[1]: »postbuild« ist bereits aktualisiert. make[1]: Leaving directory `/tmp/modconfig-C4tvy7/vmblock-only' cp -f vmblock.ko ./../vmblock.o make: Leaving directory `/tmp/modconfig-C4tvy7/vmblock-only' Using 2.6.x kernel build system. make: Entering directory `/tmp/modconfig-C4tvy7/vmci-only' /bin/make -C /lib/modules/3.5.2-3.fc17.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \ MODULEBUILDDIR= modules make[1]: Entering directory `/usr/src/kernels/3.5.2-3.fc17.x86_64' CC [M] /tmp/modconfig-C4tvy7/vmci-only/linux/driver.o CC [M] /tmp/modconfig-C4tvy7/vmci-only/linux/vmciKernelIf.o CC [M] /tmp/modconfig-C4tvy7/vmci-only/common/vmciDriver.o CC [M] /tmp/modconfig-C4tvy7/vmci-only/common/vmciResource.o CC [M] /tmp/modconfig-C4tvy7/vmci-only/common/vmciRoute.o CC [M] /tmp/modconfig-C4tvy7/vmci-only/common/vmciContext.o CC [M] /tmp/modconfig-C4tvy7/vmci-only/common/vmciDatagram.o CC [M] /tmp/modconfig-C4tvy7/vmci-only/common/vmciHashtable.o CC [M] /tmp/modconfig-C4tvy7/vmci-only/common/vmciEvent.o CC [M] /tmp/modconfig-C4tvy7/vmci-only/common/vmciQueuePair.o CC [M] /tmp/modconfig-C4tvy7/vmci-only/common/vmciQPair.o CC [M] /tmp/modconfig-C4tvy7/vmci-only/common/vmciDoorbell.o CC [M] /tmp/modconfig-C4tvy7/vmci-only/driverLog.o LD [M] /tmp/modconfig-C4tvy7/vmci-only/vmci.o Building modules, stage 2. MODPOST 1 modules CC /tmp/modconfig-C4tvy7/vmci-only/vmci.mod.o LD [M] /tmp/modconfig-C4tvy7/vmci-only/vmci.ko make[1]: Leaving directory `/usr/src/kernels/3.5.2-3.fc17.x86_64' /bin/make -C $PWD SRCROOT=$PWD/. \ MODULEBUILDDIR= postbuild make[1]: Entering directory `/tmp/modconfig-C4tvy7/vmci-only' make[1]: »postbuild« ist bereits aktualisiert. make[1]: Leaving directory `/tmp/modconfig-C4tvy7/vmci-only' cp -f vmci.ko ./../vmci.o make: Leaving directory `/tmp/modconfig-C4tvy7/vmci-only' Using 2.6.x kernel build system. make: Entering directory `/tmp/modconfig-C4tvy7/vsock-only' /bin/make -C /lib/modules/3.5.2-3.fc17.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \ MODULEBUILDDIR= modules make[1]: Entering directory `/usr/src/kernels/3.5.2-3.fc17.x86_64' CC [M] /tmp/modconfig-C4tvy7/vsock-only/linux/af_vsock.o CC [M] /tmp/modconfig-C4tvy7/vsock-only/linux/vsockAddr.o CC [M] /tmp/modconfig-C4tvy7/vsock-only/linux/notifyQState.o CC [M] /tmp/modconfig-C4tvy7/vsock-only/linux/util.o CC [M] /tmp/modconfig-C4tvy7/vsock-only/linux/stats.o CC [M] /tmp/modconfig-C4tvy7/vsock-only/linux/notify.o CC [M] /tmp/modconfig-C4tvy7/vsock-only/driverLog.o LD [M] /tmp/modconfig-C4tvy7/vsock-only/vsock.o Building modules, stage 2. MODPOST 1 modules CC /tmp/modconfig-C4tvy7/vsock-only/vsock.mod.o LD [M] /tmp/modconfig-C4tvy7/vsock-only/vsock.ko make[1]: Leaving directory `/usr/src/kernels/3.5.2-3.fc17.x86_64' /bin/make -C $PWD SRCROOT=$PWD/. \ MODULEBUILDDIR= postbuild make[1]: Entering directory `/tmp/modconfig-C4tvy7/vsock-only' make[1]: »postbuild« ist bereits aktualisiert. make[1]: Leaving directory `/tmp/modconfig-C4tvy7/vsock-only' cp -f vsock.ko ./../vsock.o make: Leaving directory `/tmp/modconfig-C4tvy7/vsock-only' Starting vmware (via systemctl): [ OK ]
The two files "/ usr/lib/vmware/settings ' and ' / home/martin/vmware/config ' do not exist.
Now the question is, how do I create these files or what files should be removed from the old settings. ?Why are there vmplayer immediately after startup. ?
I had what I think it's the same problem on 9, Fedora-17 64-bit workstation.
I used the patch vmmon here:
http://communities.VMware.com/thread/400616?start=15&TSTART=0
and modifed the patcher created by Artem S. Tashkinov to apply it.
Solved it for me, I hope for you, too.
-
Why my drive hard Boot keep reading and writing for 20 minutes after the start?
As the title says my HDD Boot continues to read and write for about 20 minutes after the start. Read and write up to 10 GB in the process. I would say a good way to destroy a disc. I have not seen this behavior in any other OS.
10.10.5 OS version
Model: Mac Pro
ID: MacPro3, 1
Processor: Intel Quad-Core Xeon
Number of processors: 2
Total number of cores: 8
(Vivid RAM) memory: 8 GB
Any help will be greatly appreciated.
Thank you.
Check Console.app and see what happens. Could be something of a time Machine for Spotlight indexing to a process of runaway of an OS X or a bug in the application.
-
I got am HP Pavilion 17-e049wm Notebook PC product #E0J75UAR for about 4 weeks now. I bought it refurbished. A week ago I started having this problem. 3, e, d and c keys do not work when I first start the computer all of the other keys work. Nothing happens when they are pressed. Sometimes I will restart the computer and they work again, other times they won't, but often will start working if I left the computer set for about five minutes after the start.
The computer is spotlessly clean. I've only used a dozen times or more. Nothing has been spilled on the keyboard.
Sounds like software for me, but what?
I am running Windows 8.1 and no programs are running at startup, with the exception of a program start button, but the problem began weeks after installing that.
Any ideas?
FWIW, I called hp. They believed excluded material and had me do a full system restore. Problem persists... The things you own end up owning you they say... I guess it's doubly true if you own a hp laptop. Full day turned... One day closer to death. Thanks Obama.
-
no user accts are visible, after the start, on the family windows xp login screen
have HP pavilion zd7000 with windows XP Home edition OS... after the start there is no visible user accounts to choose from... There should be 2 it... Owner and my name... no password were assigned to each user account, don't know how it happened was working perfectly for months... now I can't past the login screen... someone can help me? .. .thanks in advance
When the login screen appears, try pressing Ctrl-Alt-Del twice. This should bring up a classic connection window. Enter the user name and password (if there is one) and see if you can connect in this way.
HTH,
JW
-
It seems that if the application passes Simple (opvapp.exe) that allows me to enter the password/user does not start after the start.
I can't start windows in safe mode because the button F8 Mode (I tried FN + F8) is not responding.
What alternative should I solve the problem?
Find a possible solution:
-Press ESC to HP connection icon
-Choose F11 and follow the instructions to start Windows in safe mode
You can then use the system restore to solve the problem.
-
Why lsass.exe consumes resources after the start?
Lsass.exe turns 15-20% cpu level for 10-15 minutes after the start. I have a fast, dual-core machine and the latest XP.
Hello
"lsass.exe" is the local security authentication server. It checks the validity of the user on your PC or Server logons. Lsass generates the process responsible for authenticating users for the Winlogon service. This is done by using packages of authentication such as the default, Msgina.dll. If authentication successful, Lsass generates the user access token, which is used to launch the initial shell. Other processes that the user initiates then inherit this token. More information
Note: The lsass.exe file is located in the C:\Windows\System32 folder. In other cases, lsass.exe is a virus, spyware, Trojan or worm!
If you suspect a viral activity, and then run Microsoft Security Scanner and check.
http://www.Microsoft.com/security/scanner/en-us/default.aspxI hope this helps.
Maybe you are looking for
-
WLAN driver for Equium L30-149 for Win XP
Hello I have trouble finding the right drivers for the wlan on my toshiba after a clean install of windows xp.I looked on the website support but can only find drivers for vista. Someone at - it any idea where I might look?
-
Import NationalInstruments.NI4882 cannot be found for application gpib VB2010
Hi all I have trouble of base to develop a communication VB2010 gpib application. When you include in my code Imports NationalInstruments.NI4882 I have the following error Warnung Der 1 import "NationalInstruments.ni4882" angegebene Namespace oder ty
-
After loading explorer 9 and then check again in place dates, even after exploring 9 has been downloaded, it still appears as a new update... What should I do next to fix this?
-
How can I file a formal bug report?
I was playing around with voice commands, and I believe that I tracked down the cause of the inconsistent volume over the guests. I would like to file and official report if there is a mechanism to do so. Here are the details: The voice command pro
-
NVIDIA vgx k2 + C240 + UCSM
Dear all, We have a UCS C240 M3 servers connected to two 6248UP FIs configuration. We have installed grid VGX K2 NVIDIA cards in servers C240 and when we goto Server > adapters in UCSM we see only the map of VIC (VIC 1225). VGX card is installed in s