STOR. E CANVIO Formats

Similar Questions

• How to move data from iMac to 3 TB Stor.E Canvio external HARD drive

  Hi guys,.

  First post, new to all this.

  I bought a Toshiba 3 to Stor.E Canvio external hard drive to get a load of movies and music out of my iMac.

  I plugged it in, the iMac seems to recognize, so I tried to drag and drop in the folder on the hard drive, but it leaves nothing.

  Can someone give me some advice on how to move things from my iMac to the new hard disk?

  Thank you very much, looking forward to hear from you.

  Hello

  As far as I know the HARD and the NTFS file format disc media.
  If you want to use it in Mac, you must re-formatted the system filesystem HFS + for Mac compatibility.

• Toshiba Stor.e Canvio on MacBook Pro

  Hello

  I bought a Toshiba Stor.e Canvio 1 TB external hard drive and I have problems when I connect it on MacBook Pro.
  I formatted for Mac OS (with the registry) and works well with the iMac and Mac Pro, but nothing to do on Macbooks...
  Searching the Internet I found that this problem is impossible due to a hardware problem which can be solved using a USB hub and I tried but does not work...

  I don't know what else I can do if you know something about this problem, I will be appreciated...

  Thanks in advance.

  Hello

  I assume you mean on this external HARD drive
  http://www.Toshiba-multimedia.com/EU/store-external-hard-drives/Canvio/

  This HARD drive needs 900mA current and this means that you can use a USB 3.0 port or 2 USB 2.0 ports.
  The point is that a USB 3.0 port provide 900mA and USB 2.0 port provides 500mA
  So if you Mac provides only the 500mA to each USB slot, then you connect the 2 ports USB 2.0 HARD drive, in this case, you can use a usb cable to Y.

• Unable to partition Toshiba Stor.E Canvio

  Hi all

  Just bought a Stor.e Canvio hardrive 3 TB desktop.

  I use a Mac app, have formatted for Mac OS extended (journaled). I want to put 4 partitions on the disk as its to use for the backup.

  However, when I try to partition through disk utility, it gives the following error

  Partition failed with the error:

  Invalid query.

  Ideas please

  Thanks for your comments!

• Toshiba Store.e Canvio 1 TB appearing is not on Macbook

  Hello

  I have a problem with my external hard shore, it is a Toshiba Store.e Canvio 1 TB, HDTC610EW3B1.
  It works fine on my old Macbook running the Mavericks but now on my new Macbook Pro retina running on Yosemite, it will not appear anywhere.
  I checked with disk utility, and it does not, also not appearing is not on the USB in system preferences.

  Any ideas on what is happening here, please?

  Thanks in advance for your help.

  You can test it with the Windows machine? There is everything OK?

• Toshiba Stor.E Canvio HARD drive does not appear

  Hello

  I got a Toshiba Stor.E Canvio for about 2 years without problems

  By using the external drive recently and the USB cable is removed accidentally. After attempting to connect the USB on my Mac again once the external HARD drive does not appear in the Finder.

  Passing through the disk utility, the hard drive is visible, but I am unable to check or repair the disk.

  The message I get is

  "Peut-t disk utility repair this disk. "Save as many files as possible, reformat the drive and restore your backed up files.

  The HARD drive itself is turned on, the light is on... but I'm stuck now

  Any help would be appreciated

  Gary

  I m not iOS expert and, therefore, I cannot recommend to any advanced troubleshooting but recommend you check out this thread:
  http://Apple.StackExchange.com/questions/130304

• Problem with Stor.E Canvio - TB 3 drive HARD USB 3.0 external

  I bought a 3 TB Canvio HDWC130EW3J1 and used to save a load of files on the partition, with it came.
  Everything is OK. Unplugged the HDD than Win 7 and plugged into another Win 7 and - no partition.

  Win 7 identified as brute of 3 TB.
  I've messed up with her for a bit, abandoned and finally it was exchanged for a new, I assumed it was a defective controller or something.

  The replacement is exactly the same. As soon as the reader is disconnected and reconnected, everything disappeared. I tried this partitioning with a 3 TB GPT partition and a 2 TB MBR, it contains the same.

  I bought a £ 75 door stop. I dare not put anything on the drive, it is useless.
  Behaves the same USB2 and USB3.
  I had a quick glance at various forums and see people complaining about similar problems, but no resolution.

  Anyone have any idea?

  It is a HARD USB 3.0 drive that is also compatible with the USB 2.0 standard.
  I m wondering if the HARD drive could be recognized properly using a Y USB 3.0 cable that allows to connect the HARD drive to two USB ports.

  In addition HARD drive supports the format NTFS file standard and in my opinion it of not necessary to change the format of files.

  Moreover HARD drive supports password encryption and helps secure the data from unauthorized access.
  In case you use this HDD in relation to other laptops, respect this password encryption.

• Store.E Canvio HDD - Win XP logo test has been placed correctly.

  Try to install this drive but says that he has been testing windows logo for XP compatibility.

  Why?

  Hello

  To my knowledge, this error pops up to avoid errors with Windows hardware and related software that is installed. Mainly the indication that the software or driver or one of the files is not signed for the version of Windows that you are using in your case of Win XP.

  Windows system conduct detection signature each time an INF file is used to install the equipment from a designated device class. You can simply the button continue the installation of the software

  For the future, you can turn off this kind of message.
  1. open system in Control Panel.
  2. on the Hardware tab, click driver signing.
  3. under verification of signatures of file, click on ignore, warn or block
  Click Ignore to allow all device drivers must be installed on this computer, regardless of whether they have a digital signature.

• Question of Stor.E Canvio 3.5 2 TB

  I'm new to this forum and I would ask to help me solve a problem that has arisen.

  I have an external drive starts plu, but it detects when connected to USB.
  It also makes noise when it is plugged in, several times in a row and then more nothing.
  The HARD drive gave me no problems so far.

  See if you can help me.
  Thank you

  Try this procedure:
  Launch the window of the console by typing CMD in search or RUN.
  Then open the console window. Here's the command: diskpart and press enter
  Then type: automount enable and press ENTER.

  Now try to connect the drive external HARD once more and check if it will be recognized.
  Check also all the USB ports.

• Stor.E Canvio 2 TB HDD laptop - WLan access using Xbox

  I am looking to buy one of these numbers to play the digital media, currently stored on my laptop on my Xbox one.
  According to the writing on the Web site, the files are accessible wirelessly on the network.

  Can I save data to him on the network too?

  For an optimal user experience I would connect my laptop hard drive and access the multimedia files with the xbox one or the hard drive connected to the xbox one wireless and save wireless on it from my laptop.

  Or the other of these two together would be ups work?

  It is a common external USB 2.5 HDD.
  This means that you can use as a common HARD disk.

  I put t know how your setting up your home wireless network, but generally you can use this disc external HARD as NAS (storage attached to the network).

  You can also configure and add files and directories by using the Windows Media center. This will allow you to access the files on DLNA
  http://Windows.Microsoft.com/en-us/Windows7/add-media-files-to-Windows-Media-Center

  But in general your question should not be tied to this HARD drive but it s is the home network configuration.

• MacBook 2006 does not recognize the Canvio Stor.e

  Hello world!

  I bought this external HDD Stor.e Canvio (2 TB usb2/3),
  The problem is that it only appears not on the macbook in 2006 (2 GB ram 2 GHz c2d OSX 10.4) I bought it for.

  But:
  The HARD drive is perfectly recognized by my macbook pro.
  Other external hard drives are recognized by the macbook (2006), no problem here (even usb powered works of readers, the canvio has its own power plug). The canvio is formatted in Mac OS.

  Clearly, I do not understand the problem, it should work.
  And the 2006 is compatible if I read the news of the canvio box.

  No idea how to run is more than welcome.

  Thank you!

  PS: latest news, the canvio appeared on the 2006 once or twice, but I don't know what was 'different' these times.

  Hello

  First of all it s not the HARD problem because this HARD disk drive works fine in the other computer (Macbook).

  This HARD drive supports the USB 3.0 standard but it s compatible with the USB 2.0 standard.
  The point is that the USB 3.0 offers 900mA. The USB 2.0 port common supports only 500mA.

  I think the problem is the low power supplied by Macbook s USB port. In this case, you must use a USB Y cable in order to connect the HARD drive to 2 USB 2.0 ports.

  Not sure if it will really solve your problem, but I think that this should be verified

• Toshiba Canvio Stor.E 1 TB 2.5 "great copy hangin out after a few minutes

  Hello

  I just bought the Toshiba 2.5 "Stor.E Canvio 1 TB on a Windows 7 Thoshiba laptop.
  Whenever I do a great copy, after a few minutes, the copy blocks.

  The process explore hangs, it cannot be killed and the only solution is to disconnect the usb port and plug it back.

  How would I fix this?

  Thank you
  Alex

  Hello

  Theoretically, it could be a HARD drive problem.
  Would be interesting to know if the other HARD drive does the same thing

  However Stor.E Canvio is a HARD USB 3.0 drive and it takes min 900mA to operate correctly.
  It might be possible that not enough power provided by the USB port.
  You can try to plug an external USB hub between the laptop and the HARD drive to verify functionality.

• Toshiba Canvio Stor.E 1 TB 2.5 "disconnect USB port number

  Hello

  I just got a new Toshiba 2.5 "Stor.E Canvio 1 TB and there seems to be a problem with the USB connection.
  The slightest touch on the usb cord disconnects the drive.

  I found the only way to make it work is to shake the head until the light is on, but it's very tricky.

  I tried the other usb connections on my PC, and they are very good.

  Is this just a bad lead?

  > Is it just a bad lead?

  Look so
  Stor.E Canvio USB 3.0 cable and brackets ('A' micro 'B').
  Maybe you should try another

• STORE. E CANVIO 500 GB: not working + blue light

  Hello

  I use the HD on my PowerMac for Time Machine. Everything was correct and after 3 days, no answer... My computer does not show me the HD and the HD show a blue led (and no diod white, when it worked fine). What does this blue led? Can I expect again use my HD?

  Thank you all,

  Best regards

  Laurent

  I took another cable (I have a second HD Store.E Canvio) and everything is ok : white light and it works well.

  It was a cable problem...

  Sorry for this post...

  Kind regards

  Laurent

  Originally posted by Laurent___
  

  Hello

  I use the HD on my PowerMac for Time Machine. Everything was correct and after 3 days, no answer... My computer does not show me the HD and the HD show a blue led (and no diod white, when it worked fine). What does this blue led? Can I expect again use my HD?

  Thank you all,

  Best regards

  Laurent

• Toshiba STOR. E CANVIO external HARD disk - windows cannot find 'ToshibaPlaces '.

  Hello I have a problem with my new external hard drive Toshiba STOR. CANVIO E (3 terabytes).

  I double click on him and this message appears:

  Windows cannot find 'ToshibaPlaces '. Make sure you typed the name correctly and then try again. To search for a file, click on the search button, and then click search.

  The good news is that when I right click I can press 'Explorer' and it Explorer.

  Can you help me please?

  I have found this HARD drive on a Toshiba page and the page on record indicates that a Quick Start Guide has been preloaded.
  I guess I was placed on the Toshiba Places page.
  But Toshiba Places have been replaced by parts of Symbaloo and probably the link is not valid more