Storage and HA

Similar Questions

• iOS has said I'm about to storage and I'm not

  My iPhone has just started to alert me that I'm on storage, but when I go into settings > general > storage and iCloud iOS use tells me I used 4.6 GB and have always available 7.7 GB. What is going on?

  Thank you

  Hello

  Fact he says iCloud storage or storage of the phone?

  If she says iCloud storage is almost full. Follow this link: manage your iCloud - Apple Support storage space

  If it says iPhone nearly full storage. Visit this link: check your storage space on your iPhone, iPad and iPod touch - Apple Support

• 10 improvement of the Windows path hangs on "place the external storage and press OK.

  Hello

  This will be my first post on this forum.

  A couple of weeks ago, I bought a Toshiba SATELLITE CL10-B-103 for my son. The CL10-B-103 has installed Windows 8.1. Tonight I plan to make the installation of the Windows 10 upgrade because Windows 8.1 announced that he was ready for the upgrade.

  The trial progressed slowly but smooth and without problems until now... As the laptop is equipped with only an HD 32 GB the trial upgrade was informed that I had to stick a USB key. After that, the trial continues slowly but smoothly, but who did not question because I had all night. However after the first reboot of the system when he was about 60 or 66% of installation of process this error message showed: place the external storage and press OK. It's very strange since the key USB has been removed at all and was still in the system. It is strange, is that both the OK button as the Cancel button are not selectable. Without passing by the touchpad, not a tab or an entry.

  Some community online Windows 10 post mentions that, via the BIOS, the system must be initiated from this USB key. I tried to reboot the system with DEL, F2 or F8, but I couldn't get into the BIOS and wasn't able to change the boot sequence.

  After each "restart" the same error message appears. It does not matter that the USB is in it or not.

  So, my conclusion is that my CL10-B-103 is suspended/East in a loop. I don't know how to proceed.

  Please, I can really use some help.

  Thanks in advance.

  Because it seems that I can not only edit/change a message I am answering my own post now...

  The problem seems to be resolved. When I was able to use the touchpad I could push the OK butten and the upgrade product now.

• Local storage and multiple ESXi hosts

  Hi, I was wondering how vWorkspace manages local storage in an environment with a single server Vcenter and two ESXi, with a local data store each.

  If I store a 'master' (I mean the gold statue) vm on the local storage of an ESXi, can replicate vWorkspace this virtual machine to the local storage of the other ESXi as Citrix VIAB?

  If not, how can I use both my ESXi servers with local storage and maybe provide some sort of HA?

  Am I forced to use a storage shared, if I want to be able to deploy clones related both to my ESXI?

  Thanks in advance.

  Hello

  Use vSAN, or no matter what virtual SAN Appliance as an iSCSI SAN storage to prosecute two storage facilities... You can replicate between the two servers and same LUNS are used by vWorkspace.

  • StarWind free iSCSI Solution A
  • OpenFiler
  • vSAN
  • Open-e iSCS SAN

  Quick search... www.unixarena.com/.../Top-10-Storage-appliance.html

• Storage and manipulated data

  Hello

  I'm going to develop a new application which need the user create a new 'book' and in this book, the user can add data name, address Pentecost and more values.

  My man its what I have to use the OS 4.6.1, but I see that the support for SQLlite are up to 5.0.

  So that I can use for storage and allow that user to manipulate the information?

  There are several options, with permanent store the more commonly implemented a method. Check out these links:

  http://supportforums.BlackBerry.com/T5/Java-development/storing-persistent-data/Ta-p/442785

  http://supportforums.BlackBerry.com/T5/Java-development/introduction-to-persistence-models-on-BlackB...

• PlayBook storage and connectivity options

  I had a few qns on storage and connectivity options:

  1 - is anyone know how to 16 GB (32 GB) would be really available to the end user? In other words the quantity memory is used by the operating system, preload and how much is free for the user downloaded applications?

  2 PB seems to have sdcard support... at least that have USB host capabilities so I can reach the key USB etc?

  3. I've heard tethering via another Blackberry is possible via the bluetooth connection. It will also support tethering with a non-Blackberry phone or which is a proprietary protocol?

  4 has a GPS? I have not heard of anyone who... If this is not the case, how to use a location based service?

  tags07 wrote:

  1 - is anyone know how to 16 GB (32 GB) would be really available to the end user? In other words the quantity memory is used by the operating system, preload and how much is free for the user downloaded applications?

  2 PB seems to have sdcard support... at least that have USB host capabilities so I can reach the key USB etc?

  3. I've heard tethering via another Blackberry is possible via the bluetooth connection. It will also support tethering with a non-Blackberry phone or which is a proprietary protocol?

  4 has a GPS? I have not heard of anyone who... If this is not the case, how to use a location based service?

  1. nobody said.  You could probably guess, after understand how the BONE back in the Simulator, as well as an estimate of 'normal' size app time 10-20 that apps could be preloaded.  I hope that you will be able to remove some of the preinstalled too stuff.

  2. it is extremely unlikely that the original will have the capacity to any host, as they more or less indicated that it will act as a slave only, at the beginning.  Later, they suggested that it is actually USB OTG (On The Go) that would use as a host, but on the only clue that Lazaridis, has been saying that they have the ability (read "could, if never set free us") to support Ethernet-over-USB.

  3. jump who

  4. I guess no..  One positive aspect of the statements on the issue have been in the 5th webcast, but I still think that they have kept their options open and these statements are not official.  Because they are good in the production of material and still did not mention of the GPS in the marketing of the statements or plug in anywhere, I tend to think that he has been left out.  Saddens me... but at least this way I'll be pleasantly surprised if it stops there, rather disappointed.  I'm pretty sure that they have a task they could put a GPS module, so maybe that will be in a later model but not the first... just a guess on my part.

• Hello, I'm willing to give up my bundle of photography (Photoshop + Lightroom) project. I tried to do if however the plan itself does not appear here, be as creative cloud storage and on that there do not cancel option when you manage the plan. Its defini

  
  Hello, I'm willing to give up my bundle of photography (Photoshop + Lightroom) project. I tried to do if however the plan itself does not appear here, be as creative cloud storage and on that there do not cancel option when you manage the plan. Its really here because I'm still charged monthly for it. Any cancellation help please?

  Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday

  -or directly at this link https://helpx.adobe.com/creative-cloud/help/cancel-membership.html

• How to move VMS to new storage AND new hosts

  Hello

  I'm having a hard time find, how can I move all the VMS NFS storage to a new storage iscsi (SAN HP). We are also the introduction of new material for guests, so throughout that this is an entirely new environment of vCenter (also from vSphere 4.1 to 5.5). My first thought was to attach new storage to the old hosts. Then do a migration of storage, one for a while (off voltage machines), remove the virtual machine from the old vCenter and then add them to the new environment of vCenter. But we have exhausted all NICs on the hosts of old, so I can't join the new storage, and I can't share a vmkernel for iscsi and nfs port.

  You have any suggestions how I can address the issue?

  It would work if you are very good to have downtime to your virtual machine.

  If you incur no downtime, you can try to install the same set of ESX (i) version on a few new series of servers (for example 10 points on 50 new servers) and add them to the old CR and proceed step by step below

  -Configure the old NFS storage on new set of servers

  -Migrate (vMotion) all VMS on old NFS to the new set of servers

  -Remove all the new set of VC servers

  -Add the same set of servers (that have been migrated from VM) to new VC

  -Migrate all virtual machines to the new storage and then upgrade your new set of servers

  In my view, this way you can avoid having a downtime for your virtual machine.

• Netspp old storage and issues of Cluster VMWARE

  Hello

  I saw a former NETAPP FAS 2020 connected storage and confiigured with the cluster of 4.1

  Customer is polanning to install new vcenter and ESXi 5 new hosts and want to migrate virtual machines to new Cluster and get rid of the old because of some problems of old hosts

  I heard some mouth sharing old storage Netapp Storage can cause some strange problems and can cause some virtual machines get corrupted

  is that correct? strange problems known?

  Sharing storage should be the correct way to migrate virtual machines safely to the news of ESXi

  It's exactly the way I use to migrate virtual machines to a cluster. I've done a couple of times (also with 3.5/4.x/5.0 storage Netapp and ESXi) and never had corrupted VMs. what VMFS is designed for.

  Of course, I would not share a LUN to ESXi hosts between different vCenters as final configuration but for migration, it is reasonable.

  Just know that:

  -Do not upgreade to VMFS5 until all ESXi4 hosts are disconnected.

  -Storage i/o Control does not work across multiple vCenters.

  -migrate does not mean "vMotion" but: power off > remove inventory > add to the inventory > voltage (of course...)

• public network for virtual machines, private storage and the service console?

  Hello

  So far I had a pretty small facility with 2 servers with 4 physical network adapters each running ESX 3.5, a small box of EqualLogic SAN to shared storage and a few virtual machines on our network of regular reinforcement, routed, not on a private.   The network config was really simple.  I just put everything on real IP addresses on our network of building.

  Now I want to move the SAN and the traffic on a private service console network, but I don't know how to do this.

  Right now I use 2 NETWORK cards on each server:

  vmnic0 is configured on vSwitch0 and has the network of the VM on it that all my use of VMS to talk to the outside world, and it also has the Service Console that uses Virtual Center and I use ssh to it.

  vmnic1 is configured on vSwitch1 and a VMKernel Port and also a Service Console Port for iSCSI Software to talk to my SAN.  (never been clear on why both are needed to talk to the SAN, but doctors say they are)

  My plan is to set up a vSwitch2 and bind it to vmnic2 and implemented a VMKernel Port and the Service Console Port for software iSCSI on the 10.x.x.x network, set up my new (larger) SAN box on the 10.x.x.x network and simply use Storage vMotion to move virtual machines to the new storage space.  As soon as I did this, I would like to not use the Service Console on vSwitch2 and not a Console Service at all on vSwitch0.  Is it possible to delete the one on vSwitch0 and just use a new vSwitch2 for Virtual Center and ssh access?

  So my proposed configuration would be:

  vSwitch0: VM network only, used by the VM guests for oriented public access network, no construction of Network Service Console, linked to vmnic0

  vSwitch1: superfluous once I do storage vMotion of everything on my old SAN, will eventually remove and pair vmnic 1 with vmnic0, linked to vmnic1

  vSwitch2: VMKernel and Service Console on the network 10.x.x.x, used to access the new SAN, used by Virtual Center to access the ESX, used to SSH in to ESX on private network, associated vmnic2

  If it works?

  Thank you.

  Hello

  VMkernel ports cannot live on the same subnet. So if you have 3 vmkernel ports say: vMotion, iSCSI and NFS. You really need 3 subnets. 1 for each vmkernel port.

  Otherwise how does he know all send properly?

  Best regards

  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
  "Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• Cancel Icloud photo storage and process to not lose the photos?

  I have a question for the Group:

  I have 7 000 photos that are based on iCloud photo storage. I know that like want to pay for storage.

  What is the process to cancel without losing any of my photos?

  Do I have to download all photos of the original library, then cancel?

  Also, I recently bought an IPhone 6. I did not notice that the iCloud photo library has been activated on the phone and therefore 5 000 photos and video are now on my phone. How can I safely remove them without losing the original photos? I have disabled iCloud photo library now but to delete all photos, the phone is off.

  Any help appreciated. Thank you!

  Jenniferwillow wrote:

  Do I have to download all photos of the original library, then cancel? YES

  Also, I recently bought an IPhone 6. I did not notice that the iCloud photo library has been activated on the phone and therefore 5 000 photos and video are now on my phone. How can I safely remove them without losing the original photos? I have disabled iCloud photo library now but to delete all photos, the phone is off. Because you have disabled iCloud photo library on the phone, you can safely remove the pictures on it without affecting anything else.

  Any help appreciated. Thank you!

  An excerpt from the Apple Support Article:

  How can I remove iCloud all the contents of the library of photos to iCloud and my devices?

  To turn off your iCloud photo library, follow these steps:

  • On your iPhone, iPad or iPod touch, go to settings > iCloud > storage > storage management > iCloud photo library, and then select Disable and remove.
  • On your Mac, go to Apple menu > System Preferences > iCloud. Click on manage, select Photo library, and then select Disable and remove.

  Photos and videos will be stored in your account for 30 days. To download your photos and your videos on your iOS device, go to settings > iCloud > Photos and select Download and keep the originals. On your Mac, open the photo, choose Photos > Preferences, and select to download the originals of this Mac. You can also select the photos and videos you want tΘlΘcharger iCloud.com.

  Here is the link to the entire article: get help with your iCloud photo library - Apple Support

  See you soon,.

  GB

• storage and warehousing of MacBook iCloud

  Hello

  I have 200 GB storage iCloud

  and MacBook 250 GB storage

  When I recorded video iCloud storage (1 GB).

  Also MacBook storage less (1 GB)? Why?

  What is the relationship between iCloud storage / storage of MacBook?

  The iCloud performs a backup of the file on your computer

  That would be true, especially if you use a photo stream

  iCloud is more a device for synchronization instead of offline storage

  If you want the storage itself - look Google Drive or Carbonite

• storage and draining battery

  Everything was well and good until I updated to iOS 9.2.1...

  It seems that somehow, keeps storage space is consumed by Documents and data (storage of more than half my phone, 64 GB). I tried all sorts of ways to work around this issue, including the removal of apps, recorded messages, photos, videos, etc. It frees temporary space. But literally the next second, the available free space begins to decrease very gradually up to 0 KB. And that's when I get locked out whatsapp and other applications.

  Another problem is that the battery charge is really, really slow. So slow it seems to be blocked. She sometimes runs pretty quickly too. I did have this problem with the previous version of iOS.

  For Apple/tech/programmers debuggers:

  Please, please, please do something about it. It may be a bug or a problem, I don't know. But all I know is that this issue affects my phone use to communicate with clients and the office.

  Moreover, to add to this, restore the phone doesn't help a bit at all.

• How can I tell if my mid 2011 13 "macbook air is a MC965LL/A configuration has 128 GB of flash storage and configuration of MC966LL/A?

  I have a mid 2011 mac book air 13 inch and am trying understand either 128 or 256 or same SSD.

  any ideas how I can tell?

  Click the Apple logo in the upper left (left side of the Menu bar), and then choose "about this Mac".

  Then, you can click on 'System report' in the lower left corner, then the line of "storage".

• Access storage and read/write USB

  Hi, so I currently share a hard disk for the network, but I would like to add a password to read and write to it. The sotrage works well when I go, I can add folders, move folders, copy files, play music, etc., but when I go to my routers IP and I go to the advanced settings for USB storage device and I press Edit... nothing happens. Maybe I'm doing the wrong way. Can someone help me please?

  Too bad I don't know why nothing don't show... pop ups have been blocked... - facepalm -.

• Best practices for storage and backups on internal and external drives

  Hello

  I have a Mac laptop and I would like your advice on how to organize the storage of files on internal and external drives and how optimizes it the backup plan.

  From now on, my organization of file storage is:

  I keep my most important files on the internal disk of SSD encrypted and less critical files on an encrypted external drive (format ExFAT). This external hard drive was errors, so I bought a new Laetitia 2 Tb drive that I formatted in Mac OS journaled with encryption instead of ExFAT, to replace.

  For backups, I do not use Time Machine, but I use an application that synchronizes files between two disks. By using this application, I first sync the essential document on the SSD files internal to the external drive, and then I synchronize all the external drive to another external drive.

  My question is, if I keep this Organization of file storage or I should, for example just move all my files, critical and non-critical for the internal SSD (I could make enough room for that) and then backup up the whole Mac with Time Machine? Or there is a better way to organize files in this scenario?

  The second question is, if it is better to keep the Organization as it split storage (internal, less critical on external criticism) is what would be the best way to back up everything?

  Thanks in advance for all contributions.

  First of all, to the ExFAT is the problem, I suggest that the reader will just physically hurt.  ExFAT is perfectly acceptable as a format where Mac and PC can read/write.  You may have reacted a little leaving ExFAT for HFS, but you have made your choice and adapts to it.

  Here is how I operate my backups:

  I use CCC (CarbonCopyClone, $40, bombich.com).  It copies the boot sectors, drive, mapping, recovery Partition (these three are 'invisible' to DiskUtility for most) as well as system partitions and data records 'other'.  These other disks may be internal for clone-to-test-new-OSX in multi-disc systems or external for backup purposes.  The beauty is that you can start an external clone in a system crash, then CCC will be re - copy the active external clone on a new/fixed internal drive.

  Encryption isn't something I know, but... If only the content of the system partition and data is encrypted, it * could * be OK for clone-back to partition-as-encrypted partitions.  If you clone internal external the external partition is active and copy the 'encrypted plan', while small adjustments are made so that the race could be bad.  Copy of the files on my partitions unencrypted change interrupt because they are individual files.

  As an alternative, you could have a system drive that does CCC charge, let the clone encrypted and encrypted internal idle and just copy the entire map with the 'third system' active.