Strange static problems.

Similar Questions

• Strange keyboard problem - Portege A100

  I have a Portege A100 some three years now.
  There is a problem with the keyboard, only the keys 5tgb - a diagonal line.
  As soon as the PC is often placed on these keys don't work at all. After a while, if I press hard, especially if I turn on caps lock shift, the key to start work and then more or less work. Sometimes turning the PC and trie still the problem using shift often makes it worse. Sometimes the keys work, but only with a delay. No other keys are affected.
  I am confused as to if it's a hardware problem (are these keys connected even if a single connector?) or a strange software problem, perhaps related to the traditional Chinese microsoft input method editor that I recently downloaded.

  Any help or advice would be welcome.

  Alan Watson

  Hello

  The keys are connected on the map as the rest of the keyboard keys.
  There are not connected separately. To me, it looks like a hardware would be malfunctions.
  Why? Well, it's not easy to say. Sometimes loses keyboard cable affects the use of the keyboard. But maybe the entire keyboard needs to be replaced.

  We must consider this possibility I think you should contact the ASP in your country. If the warranty is valid replacement should be done for free.

• Satellite C855-5347 - strange temperature problem

  I have an old C855 5347 of 3 years with a strange temporary problem, right of the touch pad between her and the corner got warm enough. I wonder what is in this area that make heat. Speccy time show Ok, all vents are clear.

  Any ideas appreciated!

  Phil

  I can only imagine that HDD produces so much heat. In fact, it is placed in the Middle, under the touchpad, but I still think it's the HARD drive.

• strange charging problem

  I have a laptop DV7-3065DX that I got last Christmas and he has recently developed a strange charging problem.  The other day and all of a sudden that it stopped charging, so I left FS2004 and within 5 to 10 minutes, I was playing FS2004, it began to charge again.  I think it may be an overheating problem.  It is not a problem of power adapter, I tried to use my mother G60 adapter and still had the same problem during execution of FS2004.

  The problem has become so bad that it would not load when activated, I called HP and I sent it back to get fixed.  I came home today, and it works fine now.  They have repaired or replaced my mobo, the thermal pad, battery and ac adapter.  I paid only for shipping to the France and I am happy to use again.

• Strange mouse problem

  I have a new laptop HP 8440 and I'm having a very strange mouse problem.  The point of the mouse on the screen from time to time will crawl slowly towards the top of the screen.  This occurs when you use the Touchpad mouse or when you use a USB optical mouse.  The mouse buttons remain active and navigation mouse continues to function (so I can pull the mouse down of his craawl), but he continued to creep upward.

  This does not happen all the time and 'fixed' after 5 minutes of me being frustrated.  I don't think this is driver-related, but my mouse driver is 5.1.2600.0

  Any ideas?

  Hi Pappytopp,

  1. run the troubleshooter from the link below: hardware devices do not work or are not detected in Windows:http://support.microsoft.com/gp/hardware_device_problems

  2. also try to disable the touchpad then use the optical mouse and check the results.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• C50-A-1DV satellite makes strange static/buzzing noise

  My brand new toshiba laptop is constantly producing a strange humming/static noise that seems to come from the fan.

  I don't know if this is the case with all these models but it's pretty boring and I fear that something could be wrong with the laptop.

  Please can someone help me on this one?
  What can be the cause of the strange noise?

  As I said it seems to come from the fan, but I'm not 100% sure.

  Have you noticed this buzzing/static noise while turning heavy fan?

  For me it of very difficult to tell if it s a good fan noise or unusual noises that may be related to problems of cooling module.

  On the other hand, you are not sure if the noise comes from the fan, so I think we are groping in the dark to 100%

  From my point of view of the few the laptop is new and if you don't know if there is a hardware problem, you should ask a favor for the engineer and check.

  Mate sorry but at this point, I have no other 'solution' for you :(

• Strange printing problem - HP 4625 on WiFi network

  Hi all

  I have a strange problem with my all-in-One HP 4625 printer newly acquired.

  Problem: Printer is no longer available for regular printing on a daily basis.

  Description: Every morning, when I try to print a regular document of any application on my laptop, I get an error message: "unable to communicate with the printer.

  

  I am able to print from my account ePrint (e.g. by Nathaniel a mail to the printer).

  I am also able to ping the printer, access SAP and communicate with the printer, the integrated Web server shows the status of the printer as "ready"... but the 'regular' file-> print does not work.

  Network configuration: 802.11 g open wireless router (3com), 2 laptops running W7.

  HP Print and Scan doctor said that everything is okay, but the print test page fails with the error message

  

  Any ideas would be very appreciated

  Thank you

  BAW

  Hello, two things to check.

  Is the 4625 using CAP1FN1240AR firmware.

  Set a static IP address on the 4625 outside the 3com DHCP range.

• Strange intermittent problem with macbook pro

  Hey there ppl.

  So, I have a Macbook Pro (15-inch, mid-2014, retina), processor i7 2.2 GHz, 16 GB of memory. Running OS X El Capitan.

  My problem is a strange, because it is only intermittently. ID say like 10-15% of the time. But its very frustrating and annoying when it does and because I am working on my computer (poker), it's also costing me. in any case, the problem usually occurs after I've been using the computer for 1, 5-3 hours or more. Usually ill be playing poker online, listen to spotify and use of the internet for stuff randomly. Everything will be fine and then suddenly ill notice that my mouse cursor will be suddenly shot through the screen occasionally. as ill be goes well with the cursor but it'll jump to the left, a couple of inches or more. Also bad note that some of my habit of 'clicks' record, so ill use the calculator for example and badly want to press 543 and maybe 5 records, but when I go to click on the 4 it does not work, and ill have to like wait a second, then click New to register the click.

  Also, if im typing something, as in poker, I have sometimes to take note of the way in which an opponent has played a helping hand or whatever, a letter or a space press custom register, so ill be typing a phrase and the space bar is and I'll have to press the key once the couple , then a letter will not register, etc.. Sound very disorienting and made it difficult to continue the task IM because it does not smoothly because of the LAG, unregistered, mouse jumping, etc.

  IM really not sure of what the root of the problem and what it is. Ive has run the malware anti-malware bytes, but that has not solved the problem. Usually when that happens ill try to restart the computer, or stop and return back but generally the problem persists. Then, after some time, maybe 20 to 45 minutes or so, when I try to use the computer it works normally with any of these problems.

  Very bizzare. Any help or insight is appreciated, let me know if you need more information

  Brandon

  Good afternoon brandonfrommililani,.

  Thanks for letting us know about the problem you are having with your cursor jumps erratically on the screen of your MacBook Pro.  The resources below provides some initial troubleshooting steps, you can try at this address.  I suppose that you work with the trackpad on your MacBook Pro.  In addition to the steps suggested below, try to connect a wired mouse to your computer to exclude Wireless interference.

  If your pointer is nervous when you use a trackpad, Magic Mouse or Magic Trackpad

  Best,

• Need help with a strange crash problem

  Hi guys,.

  I use Firefox on Windows 7 32 bit 14.0.1. The problem is that every few minutes my browser crashes. The memory usage appears on the rise and until you reach a point where it causes Firefox to crash.

  In safe mode, the problem occurs. So, naturally I tried disabling all my Add-ons to reactivate them one by one and try to find the offending module. This is where it gets strange.

  After I disabled all my modules and even all the plugins, the problem was still persistent. If Firefox works in mode safe, but out of safe mode with all my Add - ons disabled the problem persists.

  If at this point I don't really know what to do. I guess that safe mode is something I haven't thought to do, but I don't know what. The problem any help will be much appreciated.

  See you soon.

  OK, yes the problem is caused by hardware acceleration. My browser works well now that it is disabled. Apparently, this has something to do with the latest AMD video drivers:

  https://support.Mozilla.org/en-us/questions/927206

  I've recently updated to the latest drivers and now I get this problem. I figured it was something to do with it. Apparently, these problems have occurred since 12 FF. This should really be sorted.

  I'll just use FF without hardware acceleration for the moment, but I hope that we see a fix for this in the next version. Or if it's actually a problem with the AMD drivers, if all goes well they will get into it. Anyway, it needs a fix.

• Re: Satellite Pro M10 - strange Boot problem

  Hello.

  My Satellite Pro M10 has developed a strange problem. It will power with its installed hard drive.

  The yellow light beside of the plug symbol starts flashing. When there is no hard drive not connected, or another hard drive from another trendy laptop it starts fine?

  Please help, thanks in advance,

  Destro

  I don't know how to help you. HARD drive changes and everything will be ok.

  Is - this original hard drive that you got with your laptop?

• Strange sound problem with Satellite L740 TV outputs

  I'm having a strange problem here... I googled this several times already, and I only found the same solution mentioned several times and the given solution * not * work is to me.

  I have a Toshiba Satellite L740 running Windows 7 Home Edition Premium, with a 64-bit Intel Core i5 - 2410M @ 2.30 GHz CPU and 4 GB of physical RAM. My problem is the following...

  There are two different TVs in my house that I regularly connect my laptop via HDMI cable.
  The first is mine, and I can get sound through the TV very well when I plug it in.

  Sometimes, however, I will disconnect the computer from my TV and not get any sound through the laptop because he's trying to output to external speakers to TV.

  More importantly, when I connect my laptop to my * roommate * TV (the same make as mine, you mind), I can not all the sounds of his TV at all.

  This is a recent problem. Until this morning, I was able to get noise from two TV very well and only sometimes had problems with sound through the laptop itself, which has been easily resolved by restarting.

  It's just a hunch, but it's almost like * doesn't realize that there are two different TVs * that it is connected to my computer. Maybe it's stupid, I don't know, but be it, it's frustrating...

  * ALSO: * I've seen dozens of suggestions that I put my HDMI audio as default device. Yes, I did. It wasn't the issue. Is the same to activate my audio drivers in Device Manager. They are all turned on, so it's not that either. Any ideas?

  It's a bit strange if you connect the laptop to two identical televisions and use the same HDMI cable to the TV.

  Unfortunately, it all works automatically and I put t know if you can force your laptop to recognize two TVs on the same path.

  In the worst case you have to do it manually in the sound properties > playback devices.
  If it works with four mouse clicks you can change.

  I tested my laptop with two different TVs.
  At home, I have a Toshiba TV and at the office we use Sony. On both automatically get sound on the TV speakers.

  If you will be able to find the solution please let us know.

• Strange sound problem 1800-314

  A strange sort of wheezing sound is coming from the fan area, I suspect it's something to do with the processor.
  I recently set up a new fan (from the model 1800-914) which improved playback of DVD (no longer ignore), but the overall performance of the laptop are slow at times, especially when its been over 2 hours.
  What, if any, upgrades processor/replacements are available to me?
  How would I ask a new processor?

  Any help is much appreciatted!
  Cheers, L.

  Hello

  It may be that your old Fan has been damaged, but one simple change of another does not solve the problem.
  As far as I know Toshiba a different thermal glue do for different models and processors!

  So, it may be that false thermal scope glue causes failure even because the heat from the processor cannot be moved and the fan runs all the time!
  Also your processor can be damaged in the future!
  Normally only the same processor will work without problem in your 1800-314. Other processors can operate, but need it know for your own!

  Goodbye, TOK

• Satellite A100-495: strange starting problems & freezes

  Hey guys.

  I recently got my Satellite A100-495 back from repair - it had a power problem (no led was flashing and it does not start of course). They told me that the motherboard has been renewed.

  Now, I have the following two issues:

  (1) it freezes suddenly sometimes in windows after 1-2 hours of operation without problems and I have to hold the power button for a few seconds restart

  (2) I press the power on button, LEDS are underway but the screen remains black, sometimes becomes gray, hard drive makes noise, fans going on but it just does not start, do not show anything. After some tests, I have to start but once again crashes after a couple hours of functioning properly.

  Can someone tell me what is the problem here?

  Bad memory (RAM) can cause this.

  If you can get it to start, test the memory with Memtest on a bootable CD. www.memtest.org

  Otherwise, try the combination of the different memory card. If you have 2 sticks of memory, try with one stick, then try the other stick, try different locations.
  Often the memory pins can oxidize and cause problems. To clean the pins, use a pencil eraser/rubber and rub the pins of module memory.
  Be careful when you handle the memory, you can zap easily memory with static electricity. To make sure that you are connected to the earth when the memory handling.

• Strange keyboard problem. strange 2eyb6ard * r6b3e0

  Someone help me with a strange problem which passes dansMon keyboard. Few of my keys not type what they assign you to. For example if I press 'u', it type '4 '. Same thing that happens to some otherbut keys do not work. To get the correct typing, I, ve to keep press 'Fn' key and then comes the desired output of key.

  SHARD

  You seem to be pressing the NumLock key. On an English keyboard, it can be reported Num, Num Lk, digital or similar. You should be able to turn it off by pressing it again. If this does not work, try to press it by pressing the Fn. consult the manual of your computer for more information.

• public static problem (inside, outside)

  I use a PIX to isolate a subnet to a corporate network.

  inside is the corporate network

  outside is not approved LAN

  A single user in LAN not approved need to go to a specific set of IP addresses in

  And all other users can browse the Internet via downstream

  proxy server to talk to the corporate proxy server

  It works fine,

  Why I can't use the static suite for this

  public static 159.182.111.0 (Interior, exterior) 159.182.111.0 netmask 255.255.255.255 0 0

  problem is that I have to continue to add each ip address static statement such as

  public static 159.182.111.50 (Interior, exterior) 159.182.111.50 netmask 255.255.255.255 0 0

  public static 159.182.111.60 (Interior, exterior) 159.182.111.60 netmask 255.255.255.255 0 0

  public static 159.182.111.70 (Interior, exterior) 159.182.111.70 netmask 255.255.255.255 0 0

  public static 159.182.111.80 (Interior, exterior) 159.182.111.80 netmask 255.255.255.255 0 0

  Unfortunately this site VIEW use different IP addresses in the subnet, everyday

  Is any limitation of this ststic command at the low security access

  interface high security by using the static command

  Hi, I don't know, but the problem may be in the netmask in your static instruction,

  It must be 255.255.255.0 or so because it is a network and not a host.

  hope this helps.