stream HP 11: hp show no network detected

Similar Questions

• Stall network detection

  Currently, I'm trying to understand how to implement a network dropout detector in my application.  I use HTTP and so often keep a socket opened for a long time and do a lot of things on it.  Therefore, a random network dropping out really hurts to ease of use and I need to address without delay as the BONE to cause a timeout.  I was wondering if anyone could share any advice or code on how best implemented it.  I know that Peter has mentioned something himself, of course anything either would be useful.

  I thought a lot lately about the different ways that I could approach this problem:

  The simplest way possible, in theory, would be a kind of timer.  I would like to start it at the beginning of any sequence of operations of e/s, and "kick after (possibly before) each successful socket read or write."  The problem is that there is no effective obvious way to do it with the BlackBerry API.  (at least not without coarse abuse TimerTask.)

  Another option would be to have a TimerTask that runs whenever the is open, controls a set of variables on regular intervals.  I would update these variables around every success in reading/writing, and it could make its conclusions on this basis.  Of course, this raises a lot of questions on what the TimerTask interval should be, when start/stop, etc..

  Any thoughts/ideas?

  For a general watchdog, I use RealtimeClockListener.  But he gets only a kick every minute which is probably too long for the detection of dropping out of your network.  But you can use it to make sure that your stall network Detection still works.

  Personally, I have a dislike of timers because they seem to be just the threads with time management, handling I can do myself.

  And that's what I would do in this case.  I understand that you don't need that level of detail, but I'll put it in other players who are maybe not as clever as you are.

  I would like to have a watchdog thread, in a shared storage (probably RuntimeStore), all the time.  It has two States, while waiting for a timeout and idle.  In both States, she waits on the synchronized object StallDetection (I just made that name, it's just an object).  He uses wait/notify on this object to tell the Thread to do some work.

  This thread has two special methods, startTimeout() and cancelTimeout().

  Use Thread will startTimeout on this thread, through Assembly and time-out interval.  This startTimeout method will set the timeout and save the connection object, and then notify the StallDetection object.  This will give the wire in life, ii will find that it has a connection, but the timeout did not, then he will change his timeout so that he wakes up in the time limit.

  Now, there are only two possible situations:

  (a) the network Thread called cancelTimeout to cancel the timeout, because it has a good answer.  cancelTimeout clears the connection just waiting for the Thread.  When the thread wakes up, he'll find the elapsed wait time, but there is no connection to cancel, so it will be simply define another timeout, in the distant future and wait again.

  (b) the network Thread is suspended and does not cancel the timeout.  Then the Thread will wake up and see there is a link to cancel and cancel.

  It is essentially an implementation of a timer, without start-up costs and stop all the time.  I think it's better in your situation where you have a network of Red wire all the time.  But perhaps not an ad hoc http connection.

  Rather than use the two methods on the Thread, it should probably put up a model of the observer and so could be useful for a number of other situations.

  I would use the RealtimeClockListener to just check this thread is alive (isAlive()), then start it again if not.

  I would be interested in other options if people have other ideas and of course improvements on this!

  And I hope this helps.

• When try to config a home network, one of my shows unidentified network system

  When try to config a home network, one of my shows unidentified network system. but in my lan connection that other computers are correctly ping with mt local server. I have in the system of operating system is 32-bit ultimate windows and antivirus is avast. Intel dh 61 ho card mother and dual core processor

  Hi Khaled,

  We would like to you know after the information form to help you better.

  (1) what type of network you are trying to reach? It's a working group or home group?

  (2) which operating system you have installed on your local server?

  (3) how many computers do you have plugged into your local network?

  I suggest you follow the steps in the link below as reference.

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-in/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-7&V1H=win8tab1&V2H=win7tab2

   

  Join or create a workgroup

  http://Windows.Microsoft.com/en-in/Windows7/join-or-create-a-workgroup

  Write us with the details asked. We will help you to come.

• When I opened my cell phone message shows that Windows detected a hard disk problem I use toshiba laptop windows 7

  When I opened my cell phone message shows that Windows detected a hard disk problem I use Toshiba laptop windows 7

  Hi Vimalpal,

  To provide the proper resolution, I would need more information on your side.

  1. What is the number of the model of the laptop?

  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest to run the troubleshooter and check if that helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  I suggest you run the disk check and check if it helps.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• 10 Windows installed successfully on early 2009 Mac Pro Quad but no network detected

  I installed Windows company 81 on my Mac Pro without problem, using the WiFi Edimax EW-7711MAC of OWX adapter, which went very well under 8.1.

  I have upgraded to Windows 10 company, works very well, "sfc / scannow" gave rise to no error, but the card WiFi has only a beta driver 10 to win, and I can't detect all of the networks. The pilot has been out since August, seems if it was questions, he would have been fired and Edimax support did not have any major problem with the driver beta for me. I had to run commands for the visible card.

  Not sure if this is a gap in the Bootcamp drivers as I lost it scrolling and keyboard Windows functions or the beta for the WiFi card driver is at fault.

  Device Manager sees the adapter, shows in the adapters in the Panel, just no networks are detected.

  Can what version of the drivers for Bootcamp I use with an Early 2009 Mac Pro Quad to work with Windows 10? I saw some "hacks" on the boards, especially for the Macbook Pro. Curious to know if anyone has found a combination of driver that works with this model or as.

  

  

  Can you check if WiFi issues on Windows using boot camp 10 solves your problem of WiFi?

• My games freeze and I have to refresh the page, windows network detects problems with pakage 1.0

  Windows network diagnostics detects connectivity with windows version 1.0 package! IAM helpless! My games freeze and I have to keep refreshing page and its helppppppp frustrating!

  Hello

  Thanks for asking!

  1. what game are you talking about?

  2. are - what you're talking to online games?

  3 have there been recent changes to the system before the show?

  If you are referring to online games, I suggest to follow the link and follow the steps. Check if it helps.

  The problems of games online using Internet Explorer

  http://support.Microsoft.com/kb/2528246

  Reply back with the results. I'd be happy to help you.

• Green display not showing on network

  Hey, I have an airport express to extend my home network, but when I enter this room showing the Green Airport express, but then when I open the airport utility app to watch the network it shows it as it was outside the network, but now is not (the Airport express hasn't moved locations nor has the router) then sometimes when I restart the extreme show on the network map.
  Router: Airport Extreme

  Hello

  Reset AirPort Express Terminal > reset a FAQ of base station airport

• Pier show shared network - Manager profile

  Running the Server 5 and el cap, if I add network shares to a dock users that they show as a question mark that is not resolved when you click on it.  I think it's because of the network shares mapped AFTER THAT the docking station is responsible.  It wasn't a problem at the time of the Workgroup Manager, but things have changed to ovviously...

  I created a login script to 'kill the dock' after a period of time.  I also have a logoff script that did other things, so I don't know that the correct settings are enabled to allow scripts to run.

  Runs the script .sh during the session of the user refresh the dock and the network properly shortcuts card.  However, it is not automate as I want it too.  Ive has set the script to pause for 20 seconds, but it still does not for some reason any.

  Here is my script that is saved as a .sh and CHMOD 777 and then transferred to the Profile Manager in the section "login scripts.

  #! / bin/bash

  # Dock charging

  sleep 25

  Killall-KILL Dock

  output

  Anything obvious ive done wrong?

  Thank you.

  Just read this in another forum

  "

  • The connection-hook script runs synchronously before other connect actions and must therefore be short.

  "

  This explains why my script doesn't work as I had hoped.  I will try to start a file of a volume mapped instead network and see if it works.

• Satellite M300-D4316 - wireless network detected but cannot connect

  Previously, I could use LAN wireless on my laptop but last week because I signed up to a bluetooth connection, Wi - Fi connection no longer works.
  It can even detect a wireless network around me; I don't see every time when I try to connect, & it asks me to diagnose the problem & said something like "the signal is too weak.

  I'm sure that is not the problem of wireless service - all my friends can connect to him!

  What should I do?

  Maybe the wireless LAN tipped off?

  Try to press Fn + F8 to toggle wireless devices.

  Also make sure that the wireless switch is turned on in the front and the sides of the laptop.

• Satellite C660 - key FN and wireless network detection no longer works

  Hi people,

  As a result of a virus, I put my computer to its factory settings.

  I have however lost the use of the function fn (end?) of the keyboard since and therefore cannot control the lighting of the screen and so on via the F keys any longer.

  Also, my computer can not detect wireless networks more. I did all the required updates and checked the State of the wireless card, but still nothing.

  Any ideas?

  See you soon!

  Hello

  May I ask what system you have installed on this laptop?
  Is - this Windows 7?

  If you are using Windows 7, you need to install Toshiba Value added Package and Support Toshiba Flash Cards for utility work affects FN.

  I m nit course on the WLan driver because different C660-xxx supports various wireless network cards. Perhaps you could provide the name of the complete model of the C660-xxx
  This would facilitate the search for the Wlan driver.

• Streaming between computers on a home network uses the data plan

  original title: streaming

  is it between two computers on the network streaming domestic chew for download?

  Hello

  You don't even have to have internet access to the flow of your Windows 7 network.

  Getting started with streaming media
  http://Windows.Microsoft.com/en-us/Windows7/getting-started-with-media-streaming

  Getting started with streaming media
  http://Windows.Microsoft.com/en-us/Windows7/privacy-and-security-when-streaming-your-media-frequently-asked-questions

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing path network not found

  can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing network not found path.

  After restarting pc for awhile, we can access shared folder & printer but after 30 minutes (more or less) again cannot access. In the printer folder connected printer displays status as long as it is impossible to connect to the win-2003 server. Please help me out of this problem because I support banking sector.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• I am unable to stream music to Xbox because the network discovery is disabled.

  Hello.

  We just got a new Xbox and I want to listen to my music to it.  Before asking that my Os is Vista Home Basic 64-bit SP 2 with all the updated.

  Antivirus is Microsoft Security Essentials

  Firewall is Windows Firewall - on, but default settings open the port for the client to the transmission

  The problem seems to be that the computer browser service does not start

  It is configured to start automatically.  Regstry settings show that this is supposed to start.  (MaintainServerList Yes)

  Server, Workstation, and RPC can also be programmed to automatically start.  They do not start.

  I would try to start it in safe mode, but the server does not start in safe mode. For the computer browser does not either.

  When I try to start the discovery of the network, I click Yes and it confirms that I am an administrator.  Refreshes the window and he came off.

  The strange thing is that if I look at the map of the network, I can see the Xbox and our laptop.  But in network, it asks me to turn on network discovery and file sharing.

  I tried to start the service with

  net start "computer browser".

  It was not an error.

  I really don't know what else to try.

  sfc/scannow

  found errors and fixed them.

  Original title: impossible to listen to the music to Xbox because that network discovery is disabled because the computer browser Service does not start

  Hi Ryan,

  Thanks for keeping us posted and share this information with us.

  I would like you to contact XBOX support for help. Your question would be more out there.

  Check out the link-

  http://support.Xbox.com/en-us/

  You can also post your request in the Xbox Forums as well.

  Check out the link-

  http://forums.Xbox.com/xbox_forums/b/default.aspx

  Get back to us if you have other Windows-related issues. We will be happy to help you.

  Thank you.

• Vista showing several networks with my SSID

  I've just set up my WRTU54G-TM for wireless access. By linksys recommendations, I've changed the SSID, disabled the SSID broadcast and enabled MAC filtering. I joined the MAC address of my lapop Vista Home Premium. I am able to connect very well, but there seems to be several instances of my network. First of all there is "unnamed network", which I assume is mine I put not broadcasting my SSID. However, when I connect to my network "no name" 3 other networks appear showing my SSID ex. Bob Bob, Bob 2, 2 3. Is this normal? Are all of the different networks protected by the same?

  Thanks for any info you can provide.

  Do not turn off the broadcast of the SSID that you have enabled filtering MAC, no wireless computer couldn't connect unless you enter the MAC address of the computer on MAC filtering wireless... I guess that you won't get many instances of your SSID after you enable the SSID broadcast... Also, I would recommnd allows you to change the SSID... Check if it works for you...

• Suddenly "not (wireless) networks detected.

  Hi guys,.

  So I was on my laptop this morning (have had and used WiFi for over a year without problem) and suddenly lost my wireless connection. I'm as Windows 7 64-bit family.  At some point, there are still about 10 connections available wireless - mine and neighbors. Suddenly, none are detected at all.
  -J' turned off the Windows Firewall (only firewall I have). There is nothing.
  -J' I unplugged my modem and router and reconnected them and restarted my laptop. Still no networks.
  -J' checked for driver updates (everything was up-to-date).
  -I can connect to my WiFi on my iPhone and on other computers in the House. So given that and all the other networks I see normally cannot be detected or the other, I think that the problem is with the computer itself.
  -J' also tried a system restore, but it is on the "restoration of the system initialization" forever without actually doing anything.
  -I can also connect to the internet on this laptop if I plug the cable directly into it.
  Any ideas what's happening here? I searched all morning through similar topics but have not been able to solve the problem. Thanks for any help, that all the world can offer.

  On my laptop, I knocked together the following keys: fn (function) + f8. This change wireless power. For some reason, it worked contrary to right click and disable wireless manually. My friend suggested this because he had the same problem and it is solved for him also.  Your laptop can use a different combination of fn + f_. No idea why this worked or if it will work for everyone, but I've tried everything else and it instantly solved the problem for me anyway...