Stroke of lightning & CPU performance

Similar Questions

• G7 notebook pc Pavilion: the CPU performance

  Hallo,

  My computer hp laptop has i5 cpu and ran it with 60% of 5 minutes after opening it causes heat and the backround programms. I watched a few videos about it and it says to 'set affinity' of some programms to process high to run with 1 or 2 or 3 carrots. After testing this on my laptop, my cpu performance went to 40% and less, indeed, if it worked. In the future it would damage my laptop?

  Hi @warriorito,

  Thank you for your query.  I understand that your computer is slow because of the heat and open programs.  I will do my best to help you overcome this difficulty.  Here is a link to HP PC - computer is slow (Windows 7) which should contribute to the performance, here is a link to help you with the problem of overheating. HP Notebook PC - reduce the heat inside the laptop to prevent overheating.  Please let me know if this helped.

  If this post helps you solve the problem, please pay to the front by clicking on "accept as Solution", to the right of the Thumbs up icon. You can click on the " " "Twww.Mountainview.rsb.qc.ca Up Icon" gratitude!

• HD audio causing high CPU performance

  The Microsoft UAA Bus Driver for HD audio is causing my perfomance CPU to 100% and stay ther. I every time that I reboot disable it. Is it possible to permamnetly turn it off, uninstall it permanently or change the irq?

  Hi movalca,

  ·         If it works much earlier?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 2: Follow the steps in the article, if you are using service pack 2.

  http://support.Microsoft.com/kb/888111

  Also upgrade to service pack 3 and update the audio drivers.

  http://support.Microsoft.com/kb/322389

  http://support.Microsoft.com/kb/166774

• Occupation 7 Ultimate with svchost.exe high cpu performance

  Running Windows 7 Ultimate and have high with svchost.exe process cpu occupancy rates.  No application does not work.  Over time, CPU 50%, and remains there with memory being occupied 809 000 K.

  Does anyone have an idea of the cause?

  Hello!

  We will try to perform a clean boot to isolate this problem. Clean boot will help us determine whether a third-party program or an application installed on your computer is the source of the problem.

  To do this, please refer to this link: How to perform a clean boot in Windows.

  Let us know how it goes.

• The downgraded CPU performance

  Hi, a few months ago I accidentally converted my main hard disk from basic to dynamic. However, I was able to convert it back to the base, but I had to format my hard drive. I then installed Win 7 Ultimate 32 bit (or x 86) instead of the default Win 7 Ultimate 64-bit (cause hardship to turn games). But now my CPU (intel i3 m350 @ 2.26 Ghz. Its an inspiron n5010) which is still used to display an average rating on about 6.6 is now demoted to half i.e 3.3. Why is it so? Will I roll back to 64-bit or I, I jumped a few pilots. Because when I brought, he was the pilot of the technology installed turbo boost. I didn't install this time cause AFAIK turbo boost only is not supported on i3, and I also skipped some firmware drivers. What should I do? (instead of download the drivers... which I do not now)

  And Yes, I downloaded the driver-http://ftp.dell.com/Pages/Drivers/inspiron-15-intel-n5010.html and dell has given this laptop with Win 7 64 bit.

  Hello Yadullah,

  Thanks for posting your query in Microsoft Community.

   
  Windows Experience Index measures the capability of the hardware and software of your computer configuration and expresses this measurement as a number called a base score. A higher base score means that your computer will perform better and faster than a computer with a score of lower base, especially when more advanced and resource-intensive tasks running. If your computer is
  you are using an older version of the display driver, your scores can't be updated. If the display driver update would be recommended.
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows/update-drivers-recommended-links#update-drivers-recommended-links=Windows-7
   
  You can check the link for more information on average rating below.
   
  What is the Windows experience index?

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-experience-index#what-is-Windows-experience-index=Windows-7

  I hope this helps. Please let us know the results. Feel free to write us again for any help.

• Bad on VM CPU performance

  I have a 4vCPU computer virtual running sometimes hurt, but I find out why. Every night, he performs some CPU intensive operations.

  I have attached a few screenshots of processor performance graph and the disc. There is a wide gap between the CPU demand and use but negligible loan co Stop. I don't see any disk bottlenecks or the other.

  Why is this gap and the occasional poor performance.

  You should also check your performance parameters of the bios.

• Why upgrade my video card slow down my CPU performance?

  I have a HPE - 570T. Recently I have upgreaded video card a Radeon HD5450 for a GTX460 nVidia and also bought a 650 watt power supply. I did the benchmarks with the passmark software before and after. Why was my benchmark CPU 8100 before the upgrade and 7400 after the upgrade? Video card has been much faster from about 320 to 2300 for 3D applications well.

  Hi Spencer,.

  I didn't notice that a CPU issue when I installed my GTX 460 1 GB. I'm also using the Passmark Performance (64-bit) version 1019 software.  I have two marks with the same GTX 460 1 GB differnet. A reference point was about 7% more fast (Passmark rating) than the other criterion of reference.  I did RMA the first card to the manufacturer, which explains the two different references. 3D performance was the also the big change for me.  I have improved since the video drivers then perhaps it's time for an another landmark.

  You can send an email to the pass mark and ask what happened.

• Doubt about 660GTX vs 770/780GTX + CPU Performance

  First of all, I'm new here and my English isn't very good, so I'll try to explain it correctly:

  I really am the owner of:

  Motherboard: ASUS P8Z68 - V PRO GEN3

  CPU: Intel i5 - 2500K (no OC)

  RAM: 8 GB DDR3 1333 mhz

  GPU: (GB) Nvidia Ti 660GTX OC 2GB

  SSD: SAMSUNG EVO 860 250 GB

  HDD: WD Blue 1 TB

  PSU: CORSAIR AX860

  OS: Windows 7 64 bit family Premium

  As you can see, I currently own a Nvidia 660GTX Ti OC 2 GB.

  I am currently using Adobe first Pro CC and I'm really happy with it, thanks to the "GPU Mercury Playback" thing (Yes, I know, he warned me that the card is perhaps not compatible but I went), I was able to do an hour long videos to be exported/rendering in around 35 minutes 720 p 30 FPS for Youtube. I use "another program" that worked really well with my old 460GTX but, every time I put my card blabla 660GTX inside, he didn't use them is the power GPU at all no matter the options which I stuffed in the settings... instead, regardless of the option, he would make with the central unit, lasting 2 to 3 hours for a simple 30/60 min vid... But not with the CC the prob is gone! (Although I had to go into some tutorials...)

  On this subject! I thought to upgrade my GPU for a GIGABYTE Nvidia 770GTX 4 GB or 780GTX / 3GB (Gaming purposes too but it's vids here) so... The thing is, if I upgrade my card to one of these 2, will I see a significant difference in rendering time?... like, instead of waiting 35 minutes for a video of 1 h, this would take a lot less (15?).

  In addition, it would benefit the speed of rendering and stuff if I upgrade my RAM/CPU/MB to a socket/Intel i7 Z79 4770 / 16GB RAM to compatibilize better with the new GPU?.

  Thanks in advance

  (Yes, I used the 'Ask' thing, but no results of what I tried. Not even youtube has stuff of performance with the above maps)

  While that makes DVD clearly experience how powerful your GPU capabilities are, makes h.264 (better for YouTube by Ann Bens) format is largely affected by how your CPU is powerful. So presumably, changing to a more powerful GPU, or by adding a GTX card (CC supports more than one card for MPE material), probably not help much at all.

  While doing a record, you can check if your CPU work hard (more than 80% for all the hearts, measured with the Task Manager). If so this is a good indication that you are "bound to the CPU" (CPU's your weak link) for this particular workflow (refunded at the h.264 format). If however your CPU does not very hard, it could be that more RAM might help you some. 8GB is not that much these days, especially for some of the higher pixel count media formats.

  Kind regards

  Jim

  You English is OK. I just want to say when you say "doubts" the correct English translation is 'issues '. You may be Spanish or Portuguese language?

• CPU performance issue

  So I have a question about the use of the CPU on a Mac with Ubuntu as a guest in VMware fusion 3, looked around, but do not find the answers or solutions.

  I use a dual core I5 macbook pro and try to perform simulations through the guest OS.  These simulations are very intensive processor, and I would like to make use of all as much CPU as possible (without development parallel code for now).  Linux on my old machine, I'd start a simulation and completely, he would use one of the processors, but with the guest OS, a single simulation will use only about 25% of the availability of such CPU as displayed by my mac activity monitor.

  I tried different settings on the virtual machine, but it makes no difference, and I was wondering if anyone knew if it was a question of settings or if it was part of the way in which the host controls the use of the processor of the guest.

  These simulations are very intensive processor, and I would like to make use of all as much CPU as possible (without development parallel code for now).  Linux on my old machine, I'd start a simulation and completely, he would use one of the processors, but with the guest OS, a single simulation will use only about 25% of the availability of such CPU as displayed by my mac activity monitor.

  Are you sure you're correctly interpret? 100% would be all your processing power, but you said that you are on a computer with dual-core and your code is not multiprocessor aware, so there is no way you would get 100% usage. If you have a dual-core Hyperthreaded computer, pegging the base seems to be 25% usage.

• External audio connects not (stroke of lightning/airplay/bluetooth)

  Hello

  I'm on OS / X El Capitan 10.11.4 on MacBook Pro (retina, 15 inch, mid-2014).

  For some time - I can not connect my audio outputs / interfaces audio external

  -When I change my sound output using alt + volume icon on the top menu, nothing happens (when I return to this menu remains in 'internal speakers' output)

  -When I select in 'sound' in system preferences, it is selected, but the sound is still coming from internal speakers.

  These devices include

  -Airplay to ATV2 - it is worth noting this is see "airplay: off" in the menu airplay

  -Audio Bluetooth - pairs and connects fine, but the same thing happens for audio

  -Focusrite clarett 4pre audio interface of love at first sight. I have installed the required software & drivers before you connect the appliance. When I turn on the camera - I don't like sound output in the sound menu, even if it is listed under the section 'Information system' love at first sight.

  -I don't have an interface audio firewire (steinberg MR816), that was installed before the problem occurs, and this device connects very well.

  I have already tried:

  -Removing audio and bluetooth & associated airplay .perf files in / library and ~ / library, then by restarting

  -Remove all applications from the login items "Users & groups" to improve the connectivity of the airplay.

  -Reset the PRAM

  -Creating a new user with the ' parameters '.

  -I could have messed up with other parameters I remember currently.

  I couldn't find anywhere to tell me how to reset the audio settings of the mac completely, and I really want to avoid the formatting and reinstallation of mac.

  I would be extremely useful for any help.

  Thank you

  Later to perform a system recovery to solve the above problems

• Stroke of lightning or USB3.0 external Firewire Mac?

  My 2011 MBP works still strong, but the FW and USB 2.0 are not keeping up with the external storage options: I can't see any external SSD FW option for backups of 1 TB, and my needs backup are currently between 2 and 3 TB.

  Googling suggests no conversion option (aside from a separate computer with FW and USB3.0 ports) for connecting USB3.0 external to the FW port; and the last post, I've seen questions about external lightning to the FW port on the computer (here, from 2013) has confirmed that the Apple adapter is an external FW way to the Thunderbolt Mac port.

  Another option again I missed connections more quick-as-USB 2.0 for a > 1 TB to a FireWire mac external SSD drive?

  I guess you can always make your own. MacSales.com has some good ideas... I've seen some with Firewire and USB 3.0, but not much with Thunderbolt, Firewire and USB 3.0.  I don't think that you can really connect 3 USB firewire, but I could be wrong, and I do not think that there is a USB 3 map, you could add to your MacBook Pro 2011. You could try a dock any. I'm sure that your MacBook Pro is not built in thunderbolt.

  John B

• A CPU performance problen, once again!

  Dear team of Adobe After Effects, I have a problem for months and it's driving crazy me.

  I also tried a bunch of things, different settings, more/more fast RAM and an SSD of m2.

  I have these specs and I'm building my PC as a workstation Adobe AE but I paid thousands of dollars for nothing!

  When I want to work at AE, AE only uses one heart and it's a huge bottleneck in my system. I have 6 hearts with 12 threaths, it's one of the processors to consumers on an empty stomach!

  My specs:

  -i7 5820 K (OC @4, 2 GHz)

  -Samsung 950 Pro 256 m2 SSD (2.5 GB/s)

  -GTX 980 Ti

  -Asus X 99 - has

  -32 GB DDR4 RAM

  Here's a screenshot! (http://i.imgur.com/hOM7otY.png)

  

  Dave's suggestion is a good thing. I use CC 2015 to work because it is much more vivid and I open my projects in 2014 CC do use multiprocessing when it comes to rendering.

  Here is a brief explanation of what's going on.

  AE CC 2015 is the first step in a major redesign of the architecture, separating the rendering engine from the user interface for the first time in the history of AE 20 + years. It is a necessary step to improve the performance of After Effects, but it takes awhile (and versions) for them to pass through it. Thus, during this period of transition as they are the introduction of elements of the new architecture, sometimes it can be easier to use the old version to get some things. Multiprocessing is one of features not available in after effects CC 2015 (13.7)

  If you have not installed 2014 CC, CC subscription includes: How to find and install previous Version of Adobe Apps in CC-2015

• 50% of TosBtMng.exe allways need the CPU performance

  Hello

  My English may surrounding isn't very good.

  I have a problem with the Toshiba Bluetooth Personal Area Network adapter in my other laptop manufacturer.

  Allways when bluetooth TosBtMng.exe Manager runs, it takes 100% of the second part of my Intel Dual processor.

  I've already updated the driver today, but the problem is always the same. I took the files of Fujitsu Siemens in charge.

  Can get I have a more recent direct from Toshiba anywhere?
  Searching on the internet I found, that others have had the same problem, but nothing to trouble.
  Operating system is Windows XP SP2.

  Can someone help me?

  What is the model number of your laptop?

  You can use the Microsoft Bluetooth Stack. To do this, uninstall the Toshiba Bluetooth Manager in Control Panel-> Add/Remove programs.

• FaceTime grab CPU & battery

  Hello

  My Facetime recently developed a problem. He nearly took the CPU performance when you use a video call as pictured and cause noise fan.

  My Mo is Air mid 2013 version with a Capital of El updated a few months ago, but the case has happened these last 3, 4 weeks.

  Did you know this problem and how to solve?

  Thank you

  Tan

  

  Hi NgocTan!

  I can certainly see where vives fan would cause a problem with a FaceTime call since it would make it difficult for the two parties to hear.  Normally, FaceTime will not use so many resources when running so that we can understand what is happening with him together using the following troubleshooting steps and testing after each of them.

  The first thing we need to do is to reset the system management controller (SMC).  By resetting SMC, as long the MacBook Pro is well ventilated (as on a desktop or a solid surface rather than on your knees or the pillow), then that should take care of it.  Take a look at this article to find out how the SMC reset: reset the management system (SCM) controller on your Mac.

  If they still run high after this reset, we want to test mode without failure.  When you start the MacBook Pro in Mode safe, it will load only certain things which are needed to run that he and will love a "repair" of the system.  To get into Safe Mode to test, follow these steps here: OS X El Capitan: boot mode safe

  When those who have been completed, if fans are always vivid and FaceTime shows a great use, then we need to isolate where it is exactly.  The first thing to do would be to test it in a new user to see if it happens here too.  That would tell us the path we need to take the next one.  This shows how to create a new user on your computer: OS X El Capitan: Configure users on your Mac

  Make it a great day!

• Satellite R850 uses only 25% of the CPU

  Hey, my toshiba satellite R850 uses 25% of the CPU, I got 8 GB of ram, and most of the higher quality games have 20-30 FPS, is there a possibility to make it higher?

  Thanks for the help!

  How do you get this value or how do you know that only 25% of the CPU performance can be used?

  Have you noticed this behavior of the laptop is running on battery or power?

  Usually, you can change the max and min of CPU performance values in Windows power management. This allows you to decrease the CPU heat dissipation and to increase the working time of battery.

  In contrast to Intel CPU support between that the enhanced SpeedStep Technology puts both voltage and frequency in tandem up and down level to processor support.
  Simply said: the CPU runs with only if more high performance s necessary!

  I think the game frame per second question is more related to the graphics card than the CPU.
  Not quite sure this graphic card your laptop stand, but in case you want to have big game performance, the laptop should be equipped with a GPU external nVidia or ATI.