Strong signal; connectivity limited; no ip address

Similar Questions

• Strong Signal, no connection

  I'm new to the Board and I've looked everywhere to find an answer to my question and I forgot or it is simply not answered, so I'll write it now.

  I have a BEFW11S4 v4 router does not work.  I followed the steps (connected my modem to the router and goes a line from the router on my computer).  I don't get an internet connection.  If I unplug the modem to the router and to the computer (as I always do) no problems.  I have great connectivity.

  My computer (in XP) shows a strong signal wireless to the router, even if the modem is not plugged in, which I find strange.

  The question is, if I run a hard wire like this: computer-modem-router or modem-router (wireless) - to the computer, I can't connect to the internet.  When I take the router altogether, all right.

  I can't follow the steps to change the IP address and other things (I don't know how do it anyway) because I can't conect to the internet with the router somehow, while the router is attached.

  I can drive around my neighborhood and connect to popular wireless at will so I know my comptuer choices these signals to the top.

  Any ideas would be great!  Thank you.

  OK, finally found a post of 'BrickMonkey', which list step by step what to do and now everything works fine!  Thank you!  You are the best!

• Wireless network connection is connected with the strong signal, but stops working at random times

  Original title: internet says is connected with the strong signal, but stops working at random times?

  Hello
  For the last few weeks, I had problems with my internet connection. Wireless connections say I am connected and have the strength of the excellent signal. I know that this is not an ISP problem because my other computer works fine. I will be reviewed fine and then all of a sudden, the site doesn't load any more, although I'm always connected to the internet. This happens on Firefox and Internet Explorer, this isn't a browser issue.

  I read other offered on the internet and tried all, but nothing has changed. I have checked proxies, disabled antivirus and installed new, checked firewall, ran a check for malware, etc..

  Any help will be much appreciated because it becomes very frustrating to have to keep reconnected my internet when he says he's working.

  Hello

  I suggest you follow the links below and check them with the question:

  Method 1:

  Step 1:

  Start your computer in safe mode with network and check the number: http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Step 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  Uninstall and reinstall the NIC drivers and check with the question.

  a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

  b. right click on network adapters, and then click on uninstall and restart the computer.

  c. after rebooting, install network cards and check with the question.

  For reference:

  How can I troubleshoot network card? :

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  I hope this helps.

• I can't connect to the internet. "Connectivity limited or not. Seems to be the Winsock error. __

  Symptoms

  • Internet connection icon indicates: "connectivity limited or not.
  • When I try to run Internet explorer, I get "Internet Explorer cannot display webpage".
  • When I run "Diagnose connection problems" I get the following Diagnostic log indicating a Winsock error:

  • Diagnosis of last run time: 21/11/09 10:31:47

    WinSock diagnostic

    WinSock status Info Error attmpting to validate the Winsock base providers: 193 error Not all base service provider entries could be found in the winsock catalog. A reboot is required. Info Redirect the user to support call

    Diagnosis of network adapter

    Network location detection Info Using the Internet connection at home Identification of network adapter Info Network connection: name = Local Area Connection 3, device = Broadcom 440 x 10/100 Integrated Controller, MediaType = LAN, type = LAN Info Network connection: name = wireless network connection, Device = Intel (R) PRO/Wireless 3945ABG Network Connection, MediaType = LAN, type = Wireless Info Network connection: name = 1394 connection, device = 1394 Net Adapter, MediaType = LAN, type = 1394 Info Connections Ethernet and wireless available, ask the user for selection action User input required: select network connection Info WiFi selected State of the network adapter Info The network connection status: connected

    HTTP, HTTPS, FTP Diagnostic

    HTTP, HTTPS, FTP connectivity warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved error Could not make an HTTP connection. error Could not make an HTTPS connection. error Could not make an FTP connection.

  • Have tried resetting winsock.
  • No problem with wireless router - it works on other computers.

  Help!  How to fix it.

  Ice22Man,

  To reset the Winsock settings automatically, click the fix it button or link. Click run in the file download dialog box and follow the steps described in the fix it Wizard.

  Solve this problem 
  
  Microsoft Fix it 50203

  Note this wizard may be in English only; However, the automatic fix also works for other language versions of Windows.
  Note if you are not on the computer that has the problem, save the fix it solution to a flash drive or a CD and then run it on the computer with the problem.

  To manually reset Winsock for Windows Vista, follow these steps:

  1. Click
  

  type cmd in the Search box, right-click cmd.exe, click run as administrator, and press continue.

• Type netsh winsock reset at the command prompt and press ENTER.

  Note If the command is typed correctly, you will receive an error message. Retype the command. When the command is executed successfully, a confirmation is displayed, followed by a new command prompt. Proceed to step 3.

• Type exit and press ENTER.
For more information about resetting Winsock, see the following Microsoft KB article: http://support.microsoft.com/kb/811259
Hope that helps!

Cody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

• attempts to connect from another IP address.

  Received by email to verify my credentials, as an attempt to connect to another IP address seems to have been detected.

  Is phishing email? It's: Apple's support([email protected]).

  If I click on check now it goes to the: http://appleid.appstore.update.java.com.manipulei.com.br/account/097e58d83bba3ae 2731beeb77a10e134/Login.html

  where I wonder you connect and then provide my personal information.

  The e-mail is not Apple, it is a phishing attempt to try to get your account details and payment - you can transfer it to Apple: [email protected] and then delete him.

  Phishing and similar e-mail: Phishing and other suspicious emails

  The phishing emails: identifying fraudulent "phishing" email - Apple Support

  ITunes real e-mails: identification of legitimate on the iTunes Store - Apple Support emails

• How to read and display a my a miccrontroller (MCB1700) on labview signal connected via a port on a PXI machine CAN

  How to read and display a my a miccrontroller (MCB1700) on labview signal connected via a port on a machine PXI CAN?

  I tried using a DAQ Assistant, but the port is not included as one of the physical channels supported, even if all his drivers are up to date.

  Help, please...

  Thank you.

  If you can read it in MAX, then you should be able to run the NI CAN example.

  Help-> find examples

  Find the CAN and watch CAN Receive.vi.

  Basically, set up the network, open the object, read in a loop close object when it is done.

  If you have any questions about the example, go ahead and post your vi and we can work from there.

• Explorer.exe connects to an ip address, could be a spyware?

  Hello

  Explorer.exe (located in c:\windows) needs to connect to an ip address (using port 80)? I tried the ip address and it wasn't something microsoft... so I don't know why he was having need of this connection. What is a spyware? my pc is infected with some kind of malware?

  I am using windows 7 Home premium 64-bit sp 1 with updates to this day, microsoft security essentials and windows defender with windows firewall is enabled and the latest version of comodo internet security. also, I scanned my pc with kaspersky, smart security eset, emsisoft anti-malware, malwarebytes antimalware, superantispyware, hitman pro, norton internet security... I downloaded also "explorer.exe" on virustotal.com to see if something is bad, but the site says it's ok. I really want to know why explorer.exe has attempted to connect to a non-microsoft ip address or other trusted software... I saw scvhost.exe transferring some bites this IP also.

  It makes me really worry... Help, please!

  A later edition... I was installing DrawPlus Starter Edition Serif.com when Comodo automatic with a Defense + alert saying something about "conduitinstaller.exe". I have no installer "leads" and don't know what it is so... I searched on google. Some said that it is a virus, some said it is a false positive... I have uploaded to virustotal.com and it had two detections: Avast (national statistical institutes; Toolbar - A [PUP]) and DrWeb (Trojan.DownLoader5.34457)

  I looked in my installed programs and found nothing connected to this "conduct" so I deleted... Something strange on the file, it was 'created the 05.01.2012' consulted one today...

  EDIT: solved conduitinstaller.exe things... DrawPlus was trying to install a toolbar for this product made with conduit.com. Strage is that you download this executable file when I chose to do NOT to install the toolbar...

• A program called 'Strong Signal' on my computer.

  Original title;

  Question

  A program called 'Strong Signal' on my computer.  I have not installed this program.  My 'uninstall' command will not work to get rid of him.  Any suggestions?  (BTW - presented several other programs but I managed to uninstall those.  This means I've been hacked?).

  Thank you.  In the meantime, I opened a session in safe mode and was able to uninstall.  But still a mystery how he and backupmypc and two browser changes happened.  I was wondering how my computer was vulnerable to this.

• Unable to connect to the MKS: address for server esx02.mgmt.domainname.dk host lookup failed: unknown error 11002 (0x2afa)

  I get the following error when I connect to my via Vsphere Vcenter and try to connect to one of my server with the console:

  Unable to connect to the MKS: address for server esx02.mgmt.domainname.dk host lookup failed: unknown error 11002 (0x2afa)

  I'm new to VMware, I can very well do a MSTSC server and work proberly.

  the VMwareTools are out of date, when I log on the server and try to update I get the following message:

  

  any ideas here?

  I discovered that it is related to DNS

  WSATRY_AGAIN

  11002 (0x2afa)

  It is usually a temporary error during hostname resolution and means that the local server does not valuationauront of response from an authoritative server.

  the issue was that the VMware system was on a different subnet, and the firewall (TMG) blocked. bring the RDP to the Vcenter server and vsphere then open works like a charm

• How to connect to the IP address by using a string of Socket?

  I'm doing a TCP Flash of game, and although I got it to work, I can't seem to connect to an IP address by using a string. The reason why I want to do this is so that players can type in an IP address, that they want to connect.

  Here's what I have so far:

  Sock.Connect (('192.168.0.22', 8080);

  It works and connects to my IP address and no one else on the same local network can connect to it as well, but if the server is on ANOTHER computer in the House, this IP address would not work. This is why I want to be able to have a string type in the game.

  I tried this:

  var ipaddress:String = ' 192.168.0.22. "

  Sock.Connect (IPAddress, 8080);

  But it does not work. Any ideas? Thanks in advance.

  Something does not work.

  Sock.Connect (('192.168.0.22', 8080);

  var ipaddress:String = ' 192.168.0.22. "

  Sock.Connect (IPAddress, 8080);

  These are the equivalent instructions and connect takes a string of the intellectual property - it does not matter if you set the string in the connection itself, or before it don't.

• Unable to connect to a wireless router (even with a strong signal)

  OK so I have WRT160N (I think version 3) wireless router and my problem is that I can't connect wireless even if the signal is strong...

  I bought last month and it works very well at the time, I can connect my laptop and iPhone, PS3, but now I can't connect either one of them.

  Try to adjust the settings of the router wireless to... Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  On the Wireless tab, change the width of the channel to channel 11 and 20 MHz only, provide a unique name in the name box of the wireless network (SSID). In respect of wireless security, check the security key... In the wireless settings advanced... Change the tag to 75 interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings... Now let's see if you can locate your wireless network and try to connect...

• Computer has limited or no connectivity and no IP address is assigned.

  My computer is connected to my router but it says that my computer has limited or no connectivity. He said: no ip address has been assigned. I've already changed my router. It is connected to the router by an Ethernet cable. I know the router works well because I called the company and also my ISP. They told me to get a new router, which I did, but it still does not work. I have 2 laptops connected to this router and an Xbox 360 connected to it. I called the ISP customer and also the router company. I changed the router and I also tried another Ethernet cable, and they do not work. I tried to unplug my router and return connection and it does not always work. Help, please!

  Try this

  http://www.ehow.com/how_6763350_xp-but-cannot-connect-Internet.html

• Wireless is connected with the strong signal, but I still can't get

  get the 105 error message when trying to get on the internet with my linksys wusb60000

  Hi RussellMohr,

  What browser do you use?

  If you use Internet Explorer, you can follow this link & check if it helps.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  As I found by searching on the issue, many users receive this error
  Google Chrome code. If you use Google Chrome, you can follow this link and check if the problem persists.

  Webpage display issues: "this webpage is not available" (network errors 2, 102, 104, and 105)

  If you need assistance, you can post your question in the Google Chrome Help Center for assistance.

  Hope the helps of information.

  Please post back and we do know.

• MY laptop gets a strong signal from router but it does not connect to the internet.

  While trying to install a wireless adapter for my xbox (which I always did not), I was looking at settings in the laptop and must have changed something.  I tried to restart all the components involved as well as the restoration of the system, nothing works.

  Help, please!

  Hello.

  1. you get any error message?

  2. you are trying to connect the Xbox to the network?

  Please follow the steps mentioned in the articles below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Impossible to e mail my creations, I have a strong internet connection signal... problem?

  Impossible to e mail my creations... I get the message: no internet connection

  Hi AntoniaHampton

   

  1. what e-mail program is installed on the computer?

  2 are you able to access another Web page using the internet?

  
  You can check the links below and check out them if the steps to help you resolve the issue-
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

   

  I hope this helps.